Units in the Stimulus Data Logger profile editor

I have an active Veristand application that uses the data logger built in Stimulus profile editor. Recording data works fine but it does not display the channel units. This becomes a big problem with our client.

I suggested to change the channel names so that they have units in them. Before we go on changing over 100 names of channel and dealing with the associated benefits of doing this, I would like to know if there is a way to get the units of the string to display in the data logger.

Before, it was suggested, I already use the recording custom device of embedded data and I hammered him to the gills.

Has anyone concerned with that? Don't know a good workaround solution?

Thank you!

We have a patch for this NI VeriStand 2011 SP1 if you have access to this version. The problem is that VeriStand using incorrect property name for the property units. Channels are registered with a property named 'Units', then it should be "unit_string" so that the other products like the tiara to interpret it correctly.

You can apply an INI token to change this behavior in 2011 sp1. Add the token following in the file below.

Win7:
C:\ProgramData\National Instruments\NI 2011\NI VeriStand.ini VeriStand

WinXP:
C:\Documents and Settings\All Users\Application Data\National Instruments\NI VeriStand 2011\NI VeriStand.ini

[NOR VeriStand]
LogUnitsPropertyName = unit_string

Tags: NI Products

Similar Questions

  • The Eagletree data logger program does not start

    After downloading the software from version 9.13 recorder data (see [http://www.eagletreesystems.com/Support/apps.htm]) on my computer with OS Windows 7 Professional, the program does not start.
    Also try different compatibility settings does not solve the problem.

    An earlier version of the same program open normally, and also on the computer of a friend with Windows 7 there is no problem.

    Someone has any idea how to solve this problem?

    MAYDAY and greetings,

    Eddy

    Hello

    I'm a little confused about your ad Mr. Why ask you this question here?

    Here he s a user to Toshiba user forum where people can discuss on laptops Toshiba and Toshiba software, drivers, etc., but this data logger has nothing to do with Toshiba.

    In this case you must contact directly to the manufacture of the data logger. Guys have to know what you have to do to make it work.
    ?

  • Read channels alternately on the Agilent data logger

    Hello world

    I'm finalizing a code. I remotely control my Agilent 34970 and I want to read channels one after the other. I have an actuator in the device that is also controlled to close and open channels.

    The actuator channels are 201, 202... 220

    Channel multiplexers are 101, 102, 103... 121

    I want the code to close 201 and read 101, then open 201 before going out to close 202 and read 102... etc.

    At the moment what I close all of the cylinder at a time and read all the channels that is not what I want. I know a little long hand to do this is to have so many sequences, but I want to know if there is a shortcut, a little.

    A printscreen of the façade of what I currently have is attached.

    PS: I'm relatively new using labview. I'd appreciate any help I can get.

    Maybe use a loop FOR.  Put all your settings in tables and autoindex berries enter the loop FOR.  Inside the loop, you can close a relay, read a value, and then close the relay.  Repeat for as many channels and samples as you want.

  • Stimulus profile editor closes immediately when you try to open the file

    I can open the profile of Stimulus Editor, but when I try to open certain profiles and sequences, the editor closes abruptly.  I recently changed my system definition file, but it seems that it is separate from design and should affect the editor.  Is this a common problem?  How can I solve this problem?  I don't want to rebuild all these files.

    Hi KB_GenMtrs,

    I have a few questions about your request:

    (1) what NIVS version do you use? What version of NIVS where clips and profiles created?

    (2) can create a new sequence of RT or profile without crashing?

    (3) the profile editor of Stimulus crash when opening a specific sequence or profile? If so, can point out you if I try to open it on my side to test if it's recreatable?

    I look forward to your reply.

  • during an update lots of my profile folder has been put in a folder on the desktop marked the old data. How to restore this data file

    During a bet to update, automatic update of windows has started and some how much my profile data has been removed and stored in a file on the desktop. There is a simple and easy way to restore this folder from the current firefox?

    You can use the contents of the Old Firefox Data folder to "roll back" the refresh, but this involves several steps. It's probably even faster than the recovery of individual files and load those into your new profile.

    Check in the folder 'Old data Firefox' update adds a folder with a random semi name on your desktop. If there is only one, that probably has your old settings and Add-ons. If there is more than one, you'll want to work with one who has been updated recently.

    Once you have identified the profile folder, that you want to restore, here is my "old profile resurrection suggested procedure:

    Overview

    Here are the steps described in more detail below:

    1. Create a new Firefox profile
    2. Delete all of this profile folder
    3. Copy in all of the old profile folder

    Create a new profile for Firefox (Windows)

    Exit Firefox completely and start up in the Profile Manager by pasting the following in the Windows search, or the Run dialog box by pressing ENTER:

    firefox.exe -P
    

    Note: any time want to switch profiles, exit Firefox and return to this dialog box.

    Click on the button create a profile, give it a name like OldSettings and skip the option to change the location of the folder. Select the new profile from the dialog box, and then start Firefox.

    Open the new profile folder in Windows Explorer

    Firefox in the new profile should look like a new installation of the plant. Open the troubleshooting information page by using either:

    • button "3-bar" menu > "?" button > troubleshooting information
    • Menu help > troubleshooting information
    • type or paste everything: in the address bar and press Enter

    In the first table, click on the view file"" button. Firefox will launch your new profile folder in Windows Explorer.

    This folder open, switch back to Firefox and get out by using either:

    • "3-bar" menu button > button "power".
    • (menu bar) File > Exit

    Firefox is closed, the profile folder must be front and Center, or you can activate it by using the taskbar.

    Copy old data instead of new

    In this new profile folder you just popped open - NOT the one on your desktop - select all content (you can use Ctrl + a) and delete (you can press Delete on the keyboard).

    Leave this window open, open or switch to your folder of old data of Firefox. Consult your old profile folder. At this level, you should see a folder named bookmarkbackups among other things.

    Select all (Ctrl + a) and copy (or right-click > copy or Ctrl + c).

    Switch to the empty profile folder in another window and paste (or right-click > paste or Ctrl + v). This may take a few minutes because some files are large.

    Launch Firefox

    Firefox should start in this 'new' profile with the old resurrected profile data. Success?

  • I can get the data of a hygrometer using the RS232 port with the following T75.2F:H17.0% using a RS232 data logger format. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

    I can collect data from a hygrometer in a text file using the RS232 port with the following T75.2F:H17.0% format, these data are collected using a data logger software. I was wondering if I can collect this data for later analysis using Dasylab. Any help is appreciated.

    The setting below causes the error. Change for the second selection, output values of all channels.

  • Using a text editor to remove the ID3 data

    I just bought my first MP3 player, which is the Sansa Clip +. I don't like the way he organizes if data songs ID3 are present, so I opened the MP3 using a text editor (notepad ++) and removed what I think is the ID3 area on top. MP3 is now sorted by file name, which is the way I want it. Is there something wrong with that?

    Scroll through the list of music Options.

    View folder is mentioned in the user manual, although not very prominently or explained at all.

    Page 16:

    Play music
    Follow these steps to play music, audiobooks and recordings of the voice:
    1. Select music from the main Menu. Voice recordings are located in the records.
    2 Select Play all, recently added, artists, Albums, songs, Genres, my Top Rated,
    Playlists, Podcasts, audiobooks, recordings (voice), or records.

    This subject could (and should) be explained as soon as it is a very desired feature that has occurred to some extent as a result of discussions here on this forum. Would be nice if you press a little more in the manual.

  • How to use the Smart zero 4.4.0 customer service and HP Profile Editor to activate chip cards

    I have a T610 HP Smart Thin Client from scratch and I get zero Smart software to recognize the card chip when connecting. How to use the Smart zero 4.4.0 customer service and HP Profile Editor to activate chip cards. You can configure without the profile HP of the XML editor.

    Mike Sieradzki

    Hello ski_mike.

    Welcome to the HP Forums. I understand that you want to support with your Smart Client zero. However, it is a commercial product. To get assistance, thank you for posting your question on the business Forums HP: HP Enterprise Business Community

    Thank you

    Mario

  • BI Layout Editor - how to display the current date?

    Hello

    Recently used BI Layout Editor (previously using MS Word to create the presentation of the State).

    He seems really nice and easy to use.

    However quick Q - How to display the current date in the layout editor (to show the report run date).

    Any quick suggestions is appreciated.

    Thank you

    Vivek

    Tab displays your selection available.

    It's like how when you insert the table in the Word document and when you select the table, you would see 2 additional tabs such as the design and the tool.

    Can you please insert "Text Element" and select the text element and see if you go to the tab 'text '?

  • Where the DNG profile editor should install the .dcp file?

    Just made my first attempt to create a profile using X-Rite color checker passport and the DNG Profile Editor.

    Thanks to the excellent tutorial, the process went well.  Then, I took the last step of the export of the profile file (.dcp), expecting to find the new profile, when I open an image in ACR.  Unfortunately, the new profile did not appear in the drop down camera profile.

    After much research I discovered that the profile was written in the folder containing the images of .dng used to build the profile.  Obviously not where he belongs so that ACR to find.   I assumed that 'Export profile' will automatically write the .dcp file to the appropriate location.

    Where the .dcp files should be installed for Win7x64 running ACR, 8.2. ?

    Is there a way to set the default location in the profile editor?

    Thanks for your help.

    Custom designed. Profile of DCP files enter the following under your Windows user folder location:

    C:\Users\YourUserName\AppData\Roaming\Adobe\CameraRaw\CameraProfiles

    The AppData folder is a hidden system folder, you may need to enable the display of these types of files in your Explorer folder or any type \AppData display options in the folder address box and press ENTER once you get in your user name folder.

  • DNG Profile Editor done does not work with profiles of the V4

    I noticed that the DNG Profile Editor does not work with the new v4 for the D700 profiles.  The DNG profile editor will be updated to work with the new profiles?

    Yes. It is not yet ready.

  • Calibration of the camera in ACR and DNG Profile Editor

    I'm having the hardest time finding how to use camera generated with DNG Profile Editor in Camera Raw profiles.

    I use Photoshop CS4 under Windows 7. I generated the file .dcp with DNG Profile Editor and saved in the folder: Program Files/Adobe/Photoshop CS4/Presets/Camera Profiles.

    This is as far as I'm away. I was not able use this profile in ACR camera Calibration tab. I was led to believe it is displayed automatically. I found no video tutorials related to the cab and the installation of camera profiles. They all seem to relate to Lightroom.

    Any help would be greatly appreciated.

    Here's what I do:

    1. Open DNG Profile Editor
    2. Open or DNG files with image checker
    3. Define the brands from four corners
    4. Generate the profile
    5. Select the file-> Export
    6. Dcp generated file is saved in C:\Users\m\AppData\Roaming\Adobe\CameraRaw\CameraProfiles
    7. Fact
  • The DNG Converter and DNG Profile Editor included in CS4?

    The DNG Converter and DNG Profile Editor included in CS4?

    No, these are separate downloads.

    DNG home page - http://www.adobe.com/products/dng/

    Adobe Labs (for Profile editor) - http://labs.adobe.com/wiki/index.php/DNG_Profiles

  • How to analyze the data of 10 bytes encoded in the HH306 of Omegatte data logger/thermometer?

    I am trying to write a simple code for a HH306 of OMEGAETTE thermometer/travailleursduweb.com data recorder.

    That is the problem. I communicate with the device via RS - 232, using Labview 8.5.1 and windows xp. I ask her for "all the coded data", which is actually the only option. He returns 10 bytes of encoded data, the manual describes the meaning of each byte and I understand that. The problem is that I can't analyze the information for use in labview, for example: I want to extract the temperature and simply display it.

    on request, I get: 10bytes (read as a string from the serial port read buffer): display HEX: 02 00 A8 48 FF EF B6 49 B6 03 is perfect, and what I expect.     Display codes: \02\00\A8\B6H\FF\EF\B6I\03 The Normal display is a series of special characters, I don't understand, especially since I don't think they are ascii characters that must match returned hexadecimal numbers!   For the life of me, I can't understand how to extract the information (what are the 48 6 hexadecimal display) of what is returned. All string manipulation functions seem to work only on what is given in Normal view. (The 4th and 5th byte of the data are the codes of the BCD for temperature: for example the temperature was 64.8 degrees farenheight when I took this reading).

    Can someone help me to analyze the data returned by this device?

    Ok... I think that I thought about it. I found this: http://digital.ni.com/public.nsf/websearch/77C8F61D36F5A23086256634005ACB38?OpenDocument.

    I guess the normal display garbled is corresponding to each hexadecimal ascii characters. I'm just not used to seeing characters beyond the decimal number 127 ascii or hex 7F.

    So, basically, to analyze the 10 bytes of data:

    (1) break the string read from the serial port in the 10 ascii characters (using String subset vi)

    (2) son of each output string in the left input of 10 separate Type vi Cast.

    (3) wire a constant U8 in each terminal 'type' VI Type Cast.

    cables of 4) the chain of each Cast of Type vi output to the input of a number hexadecimal string vi.

    (5) concatenate or use as you wish as hexadecimal numbers (now in string format) which cause.

    See you soon.

  • Extend the underlying data readers in the analytical unit

    HI - hoping someone can help me.

    We VCOps 5.6 installed and just recently have had an error come that there is less than 10% of free for the zone data. The tech docs suggest data that we wouldn't get enough or more space than we prefer.

    I set some additional LUN but embarassingly I am not enough linux-y to ensure orders for properly extend the good player in this space - can anyone help?

    I guess you run the paralytic.

    You don't need to go to the operating system on the virtual machine to add additional space - just close the vApp, add an additional VMDK to each computer virtual where you need additional space and then restart the vApp.  There is a startup script in the virtual machines that will recognize the new storage and expand space can be used with it.

Maybe you are looking for

  • Backdoor.Breut somewhere in the Inbox

    Hi all the support of Mozilla dedicated people, The last 3 days, Symantec has been advising me to find a risk of 'Backdoor.Bruet' and specifies the location of the file: C:\Users\Lucia\AppData\Roaming\Thunderbird\Profiles\jkwxs3ov.default\ImapMail\ma

  • How to disable plugin update notifications?

    Adobe flash is not up-to-date. If firefox tenacious guard home each site than go on it is not not to date. When I go into the options of the plugin, the option "always enable" is grayed out.

  • Blue light bar menu

    When a bright blue of notification is displayed on one of the pinned tabs, he fills the entire menu bar. All items have a blue color accent. They are rendered normally after I hover over them. This often happens when minimize/maximize the window.

  • Uninstall the software for HP 5700

    My old HP 5700 printer died yesterday.  I want to uninstall its software before installing for my new HP printer, but any control panel > Add / Remove Programs displays the HP software, there is no 'Delete' option to uninstall. Is there no "Uninstall

  • Why is - that someone would use Authentication Header in a set of transformation?

    I came on a setup that uses an IPSEC transform-set of esp-3des ah-sha-hmac.  It is a Cisco router, and it runs inside a MPLS tunnel.  Because ESP does everything what AH, is there no good reason to use AH?