Unknow Device for HP DL380 G7 using Windows Server 2003 32-bit

Similar Questions

• Virtual machines, run extremely slow when the console is consulted 2 virtual machines Windows Server 2008 64-bit, Windows Server 2003 32-bit, 2 VMWare for virtual machine

  I'm in a difficult situtaition here.  I am the daily contact with a new client.  My linux guy, who is also my boss who is very busy, asked me to do some research trying to find answers for what's not on this server. We have a dual Quad Core 2.5 Ghz Lenovo server with 10 GB of ram.  2 500 GB hard drives are Raid 1.  We run Virtual Server VMWare 2 on a Debian with Gnome installation as a user interface for the side of things Linux.  Grub is the boot loader. There are two virtual machines running on the server.  The one machine that serves as a domain controller is a Windows SBS 2008 Server 64 bit, and the secondary machine has no responsibility domain.  The second machine is a Windows Server 2003 32-bit.  the 10 GB of ram 6 GB is allocated to the SBS server and 4 GB to the 2003 server.

  The problem I am running into is that everything is so slow, especially if I connect remotely to do any sort of administration on the network.  Some examples of issues I've noticed is that as soon as I log on the server via Remote Desktop SBS console management Windows Server spike to 80-95% CPU usage and it will not stop unless I close the management console.  Another instance is that if I open Backup Exec 12.5 on the SBS server it will kill the speed of the processor as well.  Long story short, there are a lot of machine to do what we need to do, but something is not configured right and non of us know what it is.  Another point to note is that the server has been in production for about 3 weeks, and the server seemed to have locked up just twice.  My professional guess is that over time, some chose thing is eating causing the crash of the memory.

  Sorry I do not have much technical insight on this topic, but this is the best I have to offer.  Any questions you all have, I'll ask my people and see if I can answer, but I could really use your help here.

  Thank you in advance,

  Heath

  2 things:

  1 you really need hard drives more than 2 in a RAID 1 for proper performance under load. More disks the better. Although I don't think that's what your problem is, he'll probably be the problem Next you will do.

  2. I don't know exactly where the configuration file is on your box of Debian for VMware Server, but you should consider adding the following options in the configuration file (on windows, it's the vmware 'config.ini'):

  prefvmx.minVmMemPct = "100".

  MemTrimRate = 0

  sched.mem.pshare.Enable = "FALSE".

  mainMem.useNamedFile = "FALSE".

  If you do some research, you can read about what these options (the largest is the memory page sharing - it should only be left on if you have a bunch of similar virtual machines running on the same box, that you don't have.) I honestly know why this is on by default, he kills the CPU when virtual machines are running different operating systems). These are the options that I now use standard in VMware Server deployments, with huge performance increases after you have added the. Just give a try.

  Edit: Also make sure that you have installed in your virtual machines VMware tools.

  Dimitri Rodis

  Integrita Systems LLC

  http://www.integritasystems.com

• -name of the server is not accessible you could are not allowed. I used windows server 2003 and windows xp as a client, the error is delivered in windows xp

  -name of the server is not accessible you could are not allowed. I've used windows server 2003 server and windows xp as a client, we use workgroup

  comed in the client error when we open the Working Group

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows Server 2003 (64-bit), Terminal Server has 2 mouse pointers when you connect via RDP

  I recently reinstalled one of our Terminal Server Windows Server 2003 (64-bit) servers.
  When you connect via RDP, I get 2 mouse pointers. One seems to be the pointer to the session that changes of hourglass, etc... and the pointer remains under the arrow.

  I have all the updates that are installed.
  There is no options on the RDP settings like what I use on other RDP to the other Terminal server sessions and is not on any other I RDP server on my client.

  I connected as other RDP clients and get with the same problem, is not a customer number
  Is there a setting on the server to disable this option?

  How can I remove the pointer that does not change in the session?

  These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• I changed my hard drive one that CPU to another in windows server 2003 64-bit enterprise version has been installed.now its prompting me to activate.what measures can be taken to activate with the old key

  Hello world

  I use windows server 2003, enterprise edition 64-bit. I changed the hard drive of one single processor to others. and now I face problem of activation. I'm not able to enter my old key to activate it. and its asking me to connect on internet.i must sign my user name and password to use internet.

  If anyone can suggest me how to get activated with over to connect to the internet and using the same old key for the hardware has changed...

  Hello

  1A, that the version of Windows is OEM copy?

  Check out this link to validate windows.

  I suggest you to validate windows and it would automatically activate the copy of Windows.

  What is the validation, and how does it work?

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/what-is-validation

  I hope this helps.

• Create a 11.2.0.1 DBConsole windows Server 2003 32-bit

  Hello
  
  I installed a database of 11 GR 2 (11.2.0.1) on a windows Server 2003 32-bit. Now, I have to create it's dbconsole, since I did not do it on the installation and the creation of the database.
  
  I searched through the notes 278100.1 , and it explains how to create a DB 11.2. What I found, it was that he made the launch of this command:
  
  EMCA - config dbcontrol db-rest create
  
  Is that ok? And if it is, at the end of the process it will say por which affected the em Console?
  
  Thank you

  Hello

  EMCA - config dbcontrol db-rest create

  It should work.

  Is that ok? And if it is, at the end of the process it will say por which affected the em Console?

  Yes, you will have the full URL to connect to the DBConsole.

  Hope this helps.
  Best regards
  Jean Valentine

• Symantec AntiVirus recommended for the database oracle on windows server 2003

  Hi all
  
  I have a server of oracle database on the windows server 2003 version 10.2.0.4 platform. What are best practices for symantec antivirus running on this server, but the database of their scanning file exclusions.
  
  My server restarted unexpectedly for many times. I have in the log of event id 6008. What can be the cause of it... ?

  How to configure the anti-virus protection on Windows Server that is running the database Oracle [ID 782354.1]

• The connection Server 4.6 on windows server 2003 32-bit sp2 installation

  Hello

  I'm trying to install the server to connect to 4.6 on windows server 2003 sp2 32-bit VM, I got the following error

  VMware-connectionserver-x86_64 - 4.6.0 - 366101.exe is valid, but for a computer other than the current computer type

  Processor: Intel (R) Xeon (TM) CPU 3.60 GHZ and I configured 2 GB RAM with PAE.

  Waiting for your help to solve this error.

  Thanks in advance

  You try to use the 64-bit Installer, download the 32-bit Installer instead, and it should be good.

  Linjo

• Install on Windows Server 2003 32-bit OBIEE

  Hi all
  
  I try to install OBIEE on Windows Server 2003. I have installed the Java SDK from here:
  http://Java.Sun.com/javase/downloads/index_jdk5.jsp
  
  Then I set the JAVA_HOME to be D:\Sun\SDK and %JAVA_HOME%\bin we add the path in the system variables.
  There is also a variable user called Administrator PATH with the value D:\Sun\SDK\bin.
  
  When I run Setup OBIEE, I wonder for the location of the JDK (JAVA_HOME), but no matter what I come here, I get the following error:
  "Please specify a location for installation of JDK valid."
  
  I tried D:\Sun\SDK, D:\Sun\SDK\bin and a few others too, but nothing seems to work.
  
  Any ideas would be appreciated.

  Hi Alex,

  Try D:\Sun\SDK\jdk

  Andrej

• Installation 11.1.2.1 using oracle database in windows server 2003 64-bit

  Hi gurus,
  
  I am about to install hyperion version 11.1.2.1 with oracle on a windows 2003 64-bit database.
  
  Do I need IIS component for hyperion to install?
  
  Thanks in advance

  Hello
  IIS is required only if you install epma, fdm, and/or hfm to the server.

  See you soon,.
  Alp

• 0x80072EFE Windows Server 2003 32-bit Web

  Microsoft community,

  Recently, we started to receive 0x80072EFE when you try to download updates.  I tried without success to the following:

  1 renamed the c:\Windows\SoftwareDistribution .old folder so that it would create a new.

  2 Ran Fit of Microsoft for Windows updates.  He said that she finds the problems and fixed them.

  3 Ran Malwarebyte and ATS, and no malware has been detected

  4. check the proxy settings and none are enabled

  Any other suggestions?

  It is a forum for specific consumers . You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/en/category/windowsserver

  Specific Windows Server security sub-forum: http://social.technet.microsoft.com/Forums/en-US/winserversecurity/threads

• I have a problem with my CALS bouncing off every day that I'm using windows Server 2003

  Thuis everything happened after that I upgraded my symantec support see below

  SYMulti-tier Protection has reached its end of life (EOF), that's why I quoted you on the replacement product. MC PROTECTION SUITE SMALL BUSINESS EDITION 3.0 PROMO RENEWAL ESSENTIAL 36MONTHS EXPRESS BAND B

  I reconnect the CAL daily

  I could contact Symantec and see if they know of any known issues.

• Remote agent ACS - can I install on windows server 2003 64-bit

  I have Setup tehfor customer 4.2 ACS to authenticate the client wirneless, ACS have to communitate with AD (windows 2003, Enterprise Edition, 64 - bit). Can I install remote agent (ACS 4.2) for ACS ACS can contact the AD to do?

  Please help me.

  Currently we do not support 64 bit OS.

  Kind regards

  ~ JG

  Note the useful messages

• Installation of FMW 11.1.1.2.0 on windows Server 2003 (32-bit)

  Hi all
  
  I want to install this software to test the object. Can someone guide me the steps of installation in short.
  My goal is to install report forms. It will be the host of an application.
  
  
  
  Kind regards
  Alok Dubey
  
  Published by: Alok Dubey March 9, 2011 14:00
  
  Published by: Alok Dubey March 9, 2011 17:03

  Hi Alok,
  glad to see that you have solved it.

  for the list of tasks, it will be not so complicated that it should be the same as 10g (.. .excepting the location of the file ;-)))

  1.
  Equip your \forms\java of your "icons.jar".
  configure your formsweb.cfg + (this file is located in \servers\WLS_FORMS\applications\formsapp_11.1.1\config+)
  for example, C:\Oracle\Middleware\user_projects\domains\ClassicDomain\serversWLS_FORMS\applications\formsapp_11.1.1\config)
  through EM and add in the archives after the frmall.jar tag, icons.jar

  2.
  you map key to the desired file frmxxx.res in \config\FormsComponent\forms or \forms\ (don't really know which is used)
  and you have your formsweb.cfg set term = yourfrm.res

  some useful links [url http://st-curriculum.oracle.com/obe/forms/11g/formsem/formsem.htm] using Oracle Enterprise Manager to administer the Forms Services

  Hope this helps
  Jean-Yves

• Wireless LAN Card for Windows Server 2003?

  Hello

  I need a fast Gigabit Wireless LAN Card for Windows Server 2003 32-bit Edition can say list the name manufacturer & model of LAN cards.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.