Unknown device on EliteBook Folio 1040 G1
Just reinstalled a Folio 1040 G1 with our custom image, all drivers/devices are installed but only one, NXP6100.
Some articles on the net said it is supposed to be owned by NXP Semiconductors.
NXP NearFieldProximity provider is installed, with a NXP6022 device id.
I checked the cva for sp64291 file, only the supported devices listed are NXP6022.
Anyone know how find/install drivers for NXP6100?
Found my own answer:
"Intel management engine components Driver" (in this case, sp64090) must be installed, then the device is properly recognized.
Tags: Notebooks
Similar Questions
-
HP EliteBook Folio 1040 G1: HP EliteBook Folio 1040 G1 - display upgrade
Is it possible to install a monitor IPS 1920 x 1080 in the HP EliteBook Folio 1040 G1 (G7U14AV)?
If Yes, could you please say on compatible screens that can be used for this purpose?
Thank you!
To answer my own question:
Yes, it is possible. It is a simple and cheap upgrade.
I managed to install THE Optronics B140HAN01.2 (AUO123D) in my HP EliteBook Folio 1040 G1.
I bought the replacement on ebay for 55,19 GBP screen:
http://www.eBay.com/ITM/271464338077?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Here's a video tutorial on how to replace the screen HP EliteBook Folio 1040:
-
HP EliteBook Folio 1040 G1 F8 &; brightness of the display of the F9 key does not
I recently got a new laptop at work (a few of us have) and we all have the same problem with this laptop. The function keys F8 and F9, which are labeled to control the brightness of the screen, do not work. I searched on several forums, and I can't find a solution.
Product name: HP EliteBook Folio 1040 G1
Product number: 2CE4140876 #ABA
Windows operating system: Windows 7 Enterprise 64-bit
Can someone help us? The screens are also dark, it is difficult to see the content on them.
Thanks in advance.
Angie
go to this link and install the software:
-
HP Elitebook Folio 1040 G1 screen privacy filter
What is the good privacy filter for 14-inch HP Elitebook Folio 1040 G1 screen?
Our assistant from a reseller HP AU100AA (HP Privacy Filter WW 14.0) product and it's apparently not the right pair, as the laptop screen edges do not have openings that this filter screen needs to be plugged.
I was unable to find information on the HP site, as most of the links does not work, they just waiting for the page indefinitely.
Hello llkka66,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.
I understand that you are looking for the correct privacy filter for PC portable HP EliteBook Folio 1040 G1. I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do to the laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE.
I hope this helps. Thanks for posting on the HP Forums. Have a great day!
-
EliteBook Folio 1040: Touchpad not working not installed driver
Hey,.
After you have configured my laptop (HP Elitebook Folio 1040), I can't use the touchpad scroll function.
Of course, I tried the 'mouse' option in the Control Panel, but it seems that there is no driver installed, because I couldn't open under 'properties' of the (non-existent) synaptics tab.
And I could not download the driver from synaptics web site (implementation of program would not install it).
Thank you for your support!
Hello:
The only suggestion I can offer would be to try one of the support page for your laptop if you have not already done so.
http://h22207.www2.HP.com/us-en/drivers/selfservice/identify?q=EliteBook+Folio+1040&tool=s-002
-
HP EliteBook Folio 1040 G3: Two monitors for HP Elitebook Folio G3
I have a HP Dock Connector to VGA and Ethernet adapter (http://store.hp.com/UKStore/Merch/Product.aspx?id=G7U78AA & opt = & salt = VAC) I use to connect my laptop to an external monitor (HP ProDisply P221) and the network cable. Now, I want to plug one second monitor (an another ProDisplay P221) to my laptop. What are my options? I don't want to buy a full docking station. I read somewhere that a dispatcher VGA cable would not be useful, because it simply reproduces the same screen that you see on the first screen. I have an available HDMI port on my laptop. Can I use this port with a HDMI cable to VGA and connect the HDMI / VGA for the second monitor? This will give me a continuous (and NOT a dual display)?
Thank you for your help.
Hello
I don't know what is the HDMI cable / VGA you talk but HDMI uses digital signals, and VGA uses analog signals. You need a good converter to convert digital to analog. And my test without a good adapter/dock that takes supported multiple external monitors, you won't get far.
Kind regards.
-
Forcepad HP EliteBook Folio 1040 G1
Hello
I love the new ForcePad and I would use it at work.
I use the external keyboard and the monitor at work and does not work with Forcepad built into the laptop. Is it possible to connect the external Forcepad via USB or similar?
Thank you very much in advance
Hi HotKeyIt
Your product is a commercial product and for your question more exposure, I would post in the trade forums. Here is a link to the forum Commercial Notebook.
Thank you
-
First Pro CC 2014 crashes on laptop HP EliteBook Folio
I just installed the 2014 at CC Pro first later on a Hewlett Packard EliteBook Folio 1040 G1 laptop. It has processors Core I7, 8 Gig ram and Windows 7 64 - bit OS SP1. Whenever I have start the first and load a project, the program crashes as soon as the project finishes loading. I run a similar setup on a VAIO laptop older (Core I5, 6 Gig ram, Windows 7 64 bit OS with SP 1) and it works fine. The source material is on a portable player with Western Digital Passport 2 terabytes and I can move it from one laptop to another. If anyone else has had a similar experience and if yes, how did you deal with it?
See you soon
David
Hi Mowbray,
Please, try the steps mentioned below and check if it works for you.
1. launch Premiere Pro and create a new empty project, go to the menu file > project settings > Renderer and change the mode only software rendering engine, remove previews if you receive a prompt and then try to import the clip again.
2. If step 1 fails or the software rendering engine only mode, go to Menu start, and search for the Device Manager, go to display maps and do a right-click on the graphics card to select the option to update driver software, on the next screen, choose "Browse my computer for driver software", then choose "Let Me pick from a list...". "and in the list, select"Standard VGA graphics cards. You may need to change the resolution of your screen and once done restart the machine again.
Launch of Premiere Pro and import the video to check.
Kind regards
Vinay
-
Hi all
I've already installed Windows 8.1 Pro x 64 and on Device Manager, I always 2 missing drivers, they are PCI Device and unknown device?
Please see attached a printscreeen. Any idea of what are the missing drivers?
Thanks to you all
Hello:
You need this driver for the PCI device...
I gave you the driver for the unknown device when you W7 on the machine, so it's probably the same as.
If it's not this one (or you had two unknown devices at the same time and already install the driver 3D driveguard), then it's probably that one...
-
A pilot missing for HP EliteBook Folio 9480 m / unknown Devide driver is missing
Hello
On my HP EliteBook Folio 9480 m Windows 7 Ultimate x 64 I have installed all the drivers on the HP.com site but a driver is still missing and on Device Manager it says device UNKNOWN?
Should which driver I install to make sure that this driver is also installed?
Please see attached the printscreenHello:
You're probably missing this driver...
-
Hi guys,.
After doing a clean update on my HP elitebook 8570W I had a few unknown devices in my device manager.
The first is a device called "base system" in PCI Slot 2 (bus PCI 36, device 0, function 1). I tried everything in my ability to determine what is this device and what drivers to install, so far without success.
In the same section. other devices, there is another unknown device on PCI Express Root complex that gives me the same headache.
I hope you guys can help me understand this.
If you need further information, I will be happy to provide that.
Kind regards
Didier
Hello:
The base system device is certainly the JMicron card reader needs the driver, not the alcor one.
You need this driver...
If the driver above does not installing it automatically, try to install manually.
To manually install the driver, go to Device Manager, click the Base system device.
Click the driver tab. Click on set to update driver. Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.
The file is located in C:\SWSetup\sp63637
Make sure that the include subfolders is selected and see the driver installs like that.
-
Unknown device for HP elitebook 2760p driver
I think I need to give more info to my question on the pilot "unknown device". My laptop is the HP Elitebook 2760p with windows 7 Home premium and I need a driver more called "unknown device". I found these numbers to the pilot: Port_ #0001.Hub_ #0004
Hi again,
The driver you need is: validity fingerprint sensor driver
I connected the driver under xp-> 8.0 and 8.1
Please let me know the result.
-
I have an unknown device:
ACPI\HPQ6007\3 & 33FD14CA & 0
After the installation of 10 windows, I installed all drivers available and up to date of the BIOS. The only thing I have not installed are various HP security features
Any ideas?
Try to install the software of HP 3D driveguard for Windows OS 10
-
EliteBook 8460p: unknown device for ellitebook p 8460 for 32-bit
I need driver for my loptop. I installed win 7 pro and he started giving me the error "Unknown device" it shows 'HPQ00004' in the Details tab.
Please help me find the solution
Thank you
lyes
Hello
Download and install HP 3D DriveGuard from the following link.
Kind regards
DP - K
-
EliteBook 850: Unknown device
Hello
I have an 'unknown device' showing in my device manager. AFAIK this is the laptop says its location is "Port_ #0005.Hub_ #0005. I had it's new and I have never been able to download anything on Windows Store. I think that the unknown device may be the cause too.
I have the G1 of 850 HPElitebook with Windows 8 (64-bit). Help, please!
You are the very welcome.
You need the driver for this device:
Maybe you are looking for
-
How to switch to Firefox 7 after installing Firefox 8?
IAM having problems with access to ancestry.com.au since I installed Firefox 8. I checked with the ancestors, and they said that they are not configured to work with Firefox 8. They work well with Firefox 7. How to switch to Firefox 7. I'm very tired
-
Stuck on white connect on Start Page
Whenever I start Skype, I'm stuck on a blank login page: I updated yesterday (July 12), and it was working fine all day then. Only this morning did this start. I tried the solution of legacylogin, but that didn't work. I'm on Windows 10 if that helps
-
Satellite L300 - where can I order CDs of update for Win 7
Hi all I find my Vista starts so long time, about five minutes, and now I want to upgrade to win 7,.Where can I order the CD Update for win 7 from the Toshiba site. Thank you
-
Apple Watch screen does not appear
I disabled the wake up function when the wrist is up but now I can't any screen to light up. How can I reset it?
-
How can I dynamically select the shared Variable API programming data type?
I am trying to create a configuration of open connections of variable shared using the programming API. It seems to me that the cleanest way to do would be to put one "open and check" routine in a loop, then call it for each variable in the library.