Unknown device on Portege M100

My Portege M100 has a unknown Devece appearing as * Texas Instruments OHCI Compliant IEEE 1394 Host Controller * anyone know where I can download a driver for this?

Thank you

Phil

Hello Phil

There is no driver for the firewire port. Just install Chipset utility and everything will be OK.
Purchased used a M100 or you try to do the clean install of OS?

Tags: Toshiba

Similar Questions

  • Re: "unknown device" on Portege R500 after installing XP

    Hello

    I have a Portege r500 ppr50e-05402ren on which I removed vista and installed winXP.

    I installed the video sound, bluetooth, lan, wlan, and the pilots of the sd.
    However, I still have an 'unknown device', with an exclaimation mark in the Device Manager.

    Anyone has any idea what this could be?

    TIA,

    A

    Just install everything from the Toshiba page.

    But maybe you're talking about the memory controller PCI.
    It s Intel Turbo Memory, also called logic chip cache Flash Intel. It's quite new technology designed to support the new features of Vista and XP doesn t have supported. That is why the unknown device in Device Manager

  • Portege M100 - no audio output device

    I recently acquired a Portege M100 1.2 ghz model no PPM1DE-0000Y-EN. The hard drive had been cleaned, so I installed Windows XP with Service Pack 3. I don't have a utility Toshiba and driver CD.

    For the moment, my main problem is that there is no sound and I get messages of "no audio output device. I can watch a DVD but once again his silence as the internal speakers do not work. I am a novice, so if you have any tips please try to not do not technical but in simple terms that I can understand. There are probably a number of questions that I haven't discovered yet IE Power Saver, etc. without wire.

    I think you're missing the SOUNDMAX program to render sounds. At least that's what I had with my M200, but apparently M100 and M200 are quite similar. Installed SOUNDMAX SE will solve the problem. The easiest way is probably to get a sort of utility CD.

    And it's probably the only one too. Even if make you it work without, you always end up without the other Toshiba Utilities (which can be quite crucial, as power saving, ability to use the buttons and the FN keys, possibility to use the touchpad, etc..).

  • Portege M440 - Vista problems: problems of Bluetooth, the unknown device and tablet.

    I just installed Vista on my Portege M400 and installed all the drivers on the driver Vista page.
    But I have several questions...

    1: bluetooth does not work. I can't find anywhere in Control Panel whatever it is on a connection bluetooth or something else.

    2: after you have installed all the drivers on the driver Vista page, there is 2 "unknown device" in Device Manager. I can't find any information on what are these devices. However, when I tried to manually install the driver bluetooth on the first of them "Unknown device" he admitted the driver. This does not work on the other. And it does not solve the problem of the bluetooth missing.

    3: the tablet itself feature works very well - the pen and everything. But when I turn the screen into tablet mode it does not change the screen layout. Or the buttons on the lower part of the screen to work.

    I hope that there is some sort of solution to these problems - and that someone can help me.

    Concerning
    Jonas Hermansen

    I am also very interested in these drivers because all I know Toshiba Vista drivers are not available at this time.

  • 'Unknown devices' after downgrad from Vista to Windows XP on Portege R500?

    I recently downgraded my Portege R500 of Vista installed at the factory for WinXP.
    I managed to install without problem, and today I met an "unknown device" which I can't fix.

    The details of this device:
    Location: on Interl 82801GBM (ICH7-M) LPC Interface Controller - 27 b 9
    Device Instance ID of: ACPI\IFX0102\4 & 38462492 & 0
    Hardware ID: ACPI\IFX0102 * IFX0102
    Compatible ID: * PNP0C31

    If anyone can help, please help!

    Hello

    Have you installed the XP drivers all available from the European pilot of Toshiba page?
    Please take the look in installation instructions txt file. You will find a list of all the necessary drivers that must be installed. The order of installation is important.
    Please install all drivers as mentioned in the installation instructions.

    PS: On the page there is also an application of Infineon Trusted Platform Module.

    Greetings

  • Yellow exclamation mark in device - Portege M100 Manager

    After a recent reinstall of Windows last XP I downloaded all the drivers/software for my model (portege M100) but after installing that I still have a yellow exclamation mark under "other devices" which he said the a network controller.

    I don't know what it is?

    Under network adapters, I installed adapter 1394 OK
    Device Bluetooth (personal area network) OK
    device (RFCOMM Protocol TDI) OK
    Card WIRELESS Intel pro/100 ve. Ok

    any ideas?

    Thank you
    Jason

    Hello

    What is with the wireless card Intel? This card is correctly installed? As far as I know, you must install Intel Wireless LAN Card Driver V.1.1.6.0.

    Check it!

  • Portege R600 - after installing XP 2 unknown devices

    I just finished installing Windows XP and everything seems perfect, except that I have 2 unknown devices and I don't know what they are.
    Also I can't find the driver for the fingerprint module.
    The application is present, but there is no driver, and it is not recognized.

    Can anyone help

    Hi ymkx,

    All the drivers and tools that you need can be downloaded here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    Also this nice article should help you identify the devices:
    [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

    Additionally, make sure that Service Pack 3 is installed before starting with the installation of the driver.

  • Portege R500 - I've got two unknown devices after installing XP

    Hello

    I am looking drivers for the two unknown devices in the hardware Manager:

    alias
    "Intel(r) 82801GBM (ICH7-M/U) LPC Controller"
    and
    'System compatible ACPI Microsoft'

    Thank you
    Roger

    Hello

    Have you installed all the drivers Toshiba XP which appear on the European driver from Toshiba site?

    There is also a training installation document that gives the proper installation order. Please check if all the XP drivers were installed, as mentioned in this doc.

    In addition, you should check if you have installed the MS WinXP SP2 and Utility Intel chipset.

    Greetings

  • Portege R500 - 4 unknown devices after downgrade from Vista to XP

    Hi all

    I've downgraded a R500 from Vista to XP Pro SP2 and installed all drivers from the support page in the correct order, even in the device manager are always 4 unknown devices called 'data Interface '. Their hardware ID is:

    USB\VID_0930 & PID_1302 & MI_00\6 & 2EDD84F6 & 0 & 0000
    USB\VID_0930 & PID_1302 & MI_01\6 & 2EDD84F6 & 0 & 0001
    USB\VID_0930 & PID_1302 & MI_02\6 & 2EDD84F6 & 0 & 0002
    USB\VID_0930 & PID_1302 & MI_03\6 & 2EDD84F6 & 0 & 0003

    All 3 USB ports operate normally and at full speed, the Interface of data got to be something else.

    Thanks in advance for any advice or help

    Hello

    These are the modem and the features of com of your compilation in the 3G module.
    Unfortunately the drivers are not available on the European download page now.
    I guess it will take a few days until that pilots will be released.
    Please see http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp for this.

  • No WiFi after installation of XP SP3 on Portege M100

    I have a used protégé M100, on which I recently did a clean install of Windows XP Pro (SP3).
    Unfortunately, as a novice, I didn't save my drivers.

    I've been on the Toshiba site and that you have downloaded everything for this model (M100 protégé Centrino), I printed the "content and the order of installation for windows XP" and load all the drivers at best in the suggested order.

    However, some items were not available to download, or I did not understand the references.

    I downloaded and installed the Atheros client utility and the customer, as well as Configfree utility aironet Cisco, but could find nothing to match the description "wireless driver".

    Perhaps because of this, or not? customer utilities above and ConfigFree (connection doctor) as well as some other diagnostic software downloads tell me I have no installed... wireless LAN hardware but I know it's there, and I never got it out!

    Can someone tell me what I can do?

    Hi George

    I think that you just have not installed the right driver WLan.

    The Portege M100 was certainly equipped with a wireless network card internal minPCI and you should see it in the device under network card Manager. It should appear as an unknown device (if no driver has been installed) or a Wlan-Intel/Atheros/Toshiba/Cisco card.

    Always it is that there are different models of the Portege M100 with different internal minPCI WLan cards and I think you used the incompatible driver.

    Please check the single WLan drivers published on the page of the Toshiba driver and check if you allow your internal wireless network card.

    In addition, you can use the Toshiba WLan portal to get the latest drivers for the Atheros/Intel cards.

    Check this box:
    http://APS.toshiba-tro.de/WLAN/

    Good bye

  • Portege M100 - need driver ethernet

    Hello!

    I need driver for my laptop ethernet. It's the Portege M100.
    I have download all the drivers from the drivers download, but still ethernet does not work.

    Thank you!!!

    What you mean with network does not work?
    Brands you yellow in Device Manager?
    Can connect you to a network?
    Please explain this more accurate.

    Did you download the driver here?
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    It would also be interesting what OS you have.

  • Portege M100 - Toshiba utility to install hangs

    I have a Portege M100 (prob M100-112), who has been 'hacked' all by its former owner, and I'm trying to re - install all the tools and drivers.

    In particular, I would like to upgrade the BIOS to v1.50 (1.30).

    The tool to upgrade the BIOS (windows) complains that the common modules are not installed, but when I try to install the common modules Installer crashes just with no visible user interface and no mistake.

    I have re-installed all the points listed in the recommended order - but not luck :-(

    Any help and constructive welcom
    Dave

    Constructive help?
    What else can you get on this forum? ;)

    Hi Dave

    I put t know the order of installation you used and what elements have installed you before, but it turns out that the common modules must be installed first before you start to install the other Toshiba tools and utilities.

    I assume that you try to install Windows XP Home edition, so here's the order of complete plants:

    Driver Chipset
    Display driver
    Audio driver
    Network driver
    Driver Modem
    Network wireless driver
    Atheros Client Utility
    Cisco Aironet Client Utility
    Infrared driver
    Common modules
    Power management
    Button controls
    Console
    Utilities
    ConfigFree
    User manual
    DVD player
    Bluetooth stack
    Utility to change display device
    DVD-RAM driver software
    Mobile extension
    Skins for Windows Media Player
    SD memory card format
    SD Secure Module
    Wireless Hotkey Utility
    Hotkey for display devices
    Sun Java Runtime Environment
    Management Console

    Have you used this order?
    Are you trying to install THIS common modules?

  • Disk error when you exit the Portege M100 in standby mode

    Hello all :)

    Have a Portege M100 for general use with WXP Pro installed.
    Recently decided to upgrade to a DVD - rom DVD burner, then bought a Sony DW-Q250A burner.
    Installed and it worked, but I continue having problems when the computer wakes from sleep, I get the message "ERROR #1 IDE", while the system reboots without additional probs in windows

    The problem is, once this happens, the DVD player then disappears from the window 'my computer' and is not visible in the "Device Manager", until I remove the disc, back up and then analyze for pop. "p in Device Manager devices, it reappears as nothing has happened."
    I thought it might have been a conflict with the IDE bus (ie the two - disk HARD & DVD - disks configured as master) so I put a rider on the HARD disk to make the slave drive (which looks like to mean a change of firmware on the DVD drive for this) but it just created more probs... Then I got a message "ERROR of IDE #0" extra when I did and the machine would not boot from the HARD drive.

    Any thoughts would be welcome? :|

    Mark

    Hi mate,

    "first of all I would like to explain the IDE #0 error: it s quite understandable given that the HARD drive is the * FIRST * player of all and must stand the * FIRST" by car, which means that you jumper shouldn´t to a slave drive. It must be a master, otherwise, as in your case, the boot of won´t machine.
    in
    So you have 2 IDE channels (primary and secondary IDE channel), and each channel has a master and a slave. Apart from the HARD drive that is located on the main channel, your DVD player is naturally on the secondary channel configured as the master drive.
    Here´s a bit 'image': D to explain it:

    -> Primary channel-> Master = HARD drive
    -> Slave = nothing

    -> Secondary channel-> Master = DVD
    -> Slave = nothing

    Regarding your problem:

    I have no definitive solution for you, but I can give you some advice. First download the latest BIOS for your machine and upgrade to the latest version. Then download the latest drivers and install them. After that, look for an update of the firmware of your player of DVD and last but no less check the database of microsoft for known issues as any of the similar issues are known for me with drives toshiba toshiba machines.

    Would be worthy to try

    :)

    See you soon

  • Wireless card not found - Portege M100

    I hope someone can help me, I'm pulling out my hair!

    I bought a used Portege M100 (model number PPM10E) and is in serious trouble to install the mini-pci wireless adapter that comes with it.

    When I turn on the wireless switch on the front, light on the cover comes in orange.

    Windows XP (Pro, SP1, and SP2 update) does not see the device. Device Manager acknowledges 2 devices with problems: 'Network controller' and 'other devices '.

    I downloaded the drivers all listed for this model and installed (or tried!) in the order specified in the Installation Instructions file (from the same page of drivers Toshiba download for this model).

    I also installed Everest Home Edition, and he sees the wireless adapter and tells me that it is an Intel 2200 BG.

    I tried to get drivers updated Intel and driverguide.com, but none of them will have, either - not even on a clean install, substituting them the driver provided by Toshiba.

    The wireless card works perfectly in other non-Toshiba notebook, also running Win XP Pro - so I guess that there is a conflict of software/hardware with this Toshiba laptop!

    I tried to 'update driver' on 1 2 problem devices) by pointing their (via Device Manager / driver update) each downloaded game (uncompressed) file. No joy.
    (2) to connect to my router via an ethernet cable and allowing Windows to search online for drivers. No joy here no more.

    When I try to run the Atheros Client Utility or Config Free, they can't find any wireless adapter on the system.

    Can someone give me advice on what to do next? Specifically, I bought this machine because I need to use wireless.

    Thanks in advance (and hope!)

    Teddy

    A few questions:
    1. you said that the wireless network card works in the Toshiba laptop not. Did you change the card WiFi of your Toshiba to the other laptop?
    2. you are not sure if it's an Intel or Atheros Wlan card (otherwise it makes no sense to install a client with an Intel Wlan card atheros). Could you please send the PnP ID of the device (DeviceManager-> properties-> details-> Hardware ID)?

  • Unknown device ACPI/HPQ0004

    Hello

    I installed the 64 bit, win 7 on my dv8-1190ef, but there is an unknown device (ACPI/HPQ0004).

    Please help me solve this problem!

    That's the guard HP 3D drive.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-76187-1 & LC = on & DLC = in & CC = US & Product = 4011375 & sw_lang = & os = 4063

    This is a slightly different model of dv8, but it will work. I guess HP forgot a list for your specific model number. I couldn't find FRO your support in any case page.

    And here's a more recent version

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-82853-1 & LC = on & DLC = in & CC = US & os = 4063 & Product = 4229850 & sw_lang =

    I found this one for a HP Envy, but as mentioned, it will work fine for a dv8, or any other laptop with burner HP hardware 3D of the guard.

Maybe you are looking for