Unknown device on system compatible ACPI Microsoft to HP M6 1045DX after the installation of win 8.1 heav'n

Similar Questions

• Unknown device on system compatible ACPI Microsoft to HP M6 1045DX after the installation of win 8.1 heavy

  On Device Manager in the computer management, it shows device unknown on system compatible ACPI Microsoft to HP M6 1045DX after installation win 8.1 heavy. hope someone can help me solve this problem

  Hello:

  You need this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123643-1&cc=us&DLC=en&LC=en&OS=4158&product=5312254&sw_lang=

• Pavilion dv7 6135dx: unknown driver on system compatible ACPI Microsoft on Windows 10

  I upgraded a HP Pavilion dv7 6135dx Windows 10 64-bit of Windows 7 64 bit and I get unknown hit-and-run advise in Device Manager. I searched on the properties and he says he's a system compatible ACPI Microsoft driver.  Any help to locate the reader is appreciated.

  Hello:

  You probably need this driver.

  FTP://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64144.exe

• Device driver unknown dv2718us in the system compatible ACPI Microsoft

  Gentlemen.

  I have a HP Pavilion dv2718us and I need all the drivers for windows 7 Ultimate 64-bit, the only show of HP in the site for Vista 64-bit drivers, so I have problem. Today I install the unknown in the system compatible ACPI Microsoft device driver, please, send me a link to download this driver.

  Best regards

  Hello

  Windows 7 should fix because otherwise, you try the following link:

  http://www.pcpitstop.com/drivers/download/Microsoft~ACPI-compliant~system.html

  Good luck.

• Unknown device with location "on system compatible ACPI Microsoft"

  I have an unknown device with location "on system compatible ACPI Microsoft". Under the hardware ID, its value reads "ACPI\INT33A0".

  I have an ASRock H77 Pro4/MVP, a Zotac GeForce GTX 670, an Intel I7 3770, team Vulcan 16 GB (4 x 4 GB) 240-pin DDR3 1600 SDRAM and a SSD MLC of Mushkin Chronos SATA 3. All the these are listed in the devices, with the exception of the memory manager, of course. In addition, all these should have already installed the drivers, but I could be wrong somehow.
  Anyone know what is the device? Where can I get the drivers for it? And what to do?
  Thank you very much!

  Hello

  I hope that my answer is not too late. But I ran into the same problem today. The unknown device is part of the Intel Smart Connect technology. If you do not need just disable it in the BIOS/UEFI Governing Council.

• System compatible ACPI Microsoft

  I have a problem in the Device Manager. It is with the system compatible ACPI Microsoft (code 28), is to show as an unknown device and the hardware ID is ACPI\VEN_HPQ & DEV_6001

  ACPI\HPQ6001

  * HPQ6001

  Any ideas or suggestions? Thanks in advance.

  Hello:

  Go to your computer laptop support and driver page, download and install the wireless driver button found under the keyboard, the mouse, and the section pilots entry.

• What type of driver is this system compatible ACPI Microsoft and Port_ #0001.Hub_ #0005

  I HAVE WINDOWS 7 64 bit INSTALLER ON HP HDX18T I ALREADY INSTALL THE DRIVERS but still 2 drivers to the elevator system compatible ACPI Microsoft and Port_ #0001.Hub_ #0005 CAN ANY ONE HELP Please

  I fixed it I downloaded

  Fingerprints and ProtectSmart hard drive Protection

• Satellite U500-115 - unknown devices after the Installation of Win XP

  Hello

  I just installed Windows XP on a Satellite U500 - 115 (PSU5EE) and cannot get rid of several unknown devices in Device Manager.

  Before to install the operating system, I changed settings AHCI in the BIOS to Compatibility-Mode (IDE), so I don't need to inject the SATA driver during installation.

  These are the unknown devices:

  ACPI\PNP0C32\1 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\2 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\3 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\PNP0C32\4 (location: Intel ICH9M LPC Interface Controller - 2919)

  ACPI\TOS6205\2 & DABA3FF & 0 (location: System compatible ACPI Microsoft)

  Of course, I installed driver chipset and graphics driver from the toshiba download page, but the unknown devices are still there! Can you please tell me what kind of driver I need to install ACPI devices - and get rid of these unknown devices?

  Thanks in advance,
  Hans

  Hello

  In my opinion the unknown devices belongs to the SATA interface controller and these appear as unknown device because you have installed the XP compatible mode.

  Try to install the Intel Storage Manager driver.

  ACPI\TOS6205 device can be a Bluetooth device.
  You must install the battery Bluetooth to get rid of unknown device.

  welcome them

• HP PAVILION TOUCHSMART 14-F048: pilot missing for system compatible ACPI Microsoft

  Unknown device showing in Device Manager after upgrade to Windows 10.

  Device ACPI\ASD0001\2 & daba3ff & 0 requires installation.

  Tried to find the driver of hp, but none can perform the action.

  Please find the solution and remedy this situation

  Hello:

  I zipped and attached to the driver that you are interested in below.

  Download and uncompress the file in its folder.

  Don't do anything with the files in the folder.

  Go to Device Manager and click on the device of the ASD who need the pilot.

  Click the driver tab.

  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected, and the driver should install.

  Then restart.

• Unknown device on the Satellite A200-SAE6E after the installation of Win XP

  I've got guys

  I got my new laptop from Vista to XP.

  But there is a problem:
  I can't find any drivers for the devices.
  A labeled being "unknown device".

  Y at - it a pack or a list to the place to get all the drivers.
  It becomes me crazy

  THX guys

  Hello

  It could be Robson (memory intel turbo). But unfortunately there are no drivers for Windows XP

• Start the system warning message: "one of the files containing the system's registry data had to be recovered after the installation of Trend Micro 2011 anti-virus software.

  Original title: registry warning message.

  This continues a question Nov 16 initially answered by SureshI and then merged by SyedV on November 26. I followed the steps all the recommended and the problem persists. Reminder, the warning does not appear in safe mode, but it does after the running File Checker, and it does after a clean boot. I don't know what you think it should tell me.

  In the event viewer I determined that 2 system errors are occurring at the time of the application in pop - up (i.e. the warning), one of them exactly at the same time. They had to do with services that have not started. I disabled these services, no effect on the appearance of the warning. Background on the application in pop information - up suggests that it may have to with a driver that is not available. I did a driver scan and see nothing that would cause the message.

  I noticed that two application errors also occur at startup, but these come about five minutes after the application pop up, so I guess they aren't relevant.

  Anything else I can do?

  Pevinco

  Problem is now solved. The point of the error of HP Cue device detection was the key. The deactivation of the service did not help, but uninstall ALL HP software that I could find (and HP's pushy!) and then reinstalling the popup eliminated printing software.

  Pevinco

• Unknown device on \Device\00000040 ACPI\AWY0001 system compatible ACPI Microsoft

  I upgraded a HP Pavilion a1268c Windows 7 64 bit and this am in Device Manager. Any help to locate the reader is appreciated. HP has no driver download and my recovery disc for Windows XP.

  Would like to solve this problem.

  Hello:

  Windows 7 doesn't have the real driver for the device to work.

  Download and install this driver and it should work...

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS008944

  If for any reason any that the driver does not work, here is the link to my skydrive folder...

  Download and unzip the file titled Awy.

  Go to Device Manager and click on the device of ACPI\AWY0001 who need a driver.

  Click the driver tab.  Click on set to update driver.  Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

• Microsoft Word does not not after the installation of Windows Live.

  Problem solved after uninstalling windows live 1.4.

  Do you need all programs Windows Live, can choose you the ones that you really need?

  http://download.live.com/?SKU=Messenger&WA=wsignin1.0

• Loss of FN - key after the installation of the updates from Microsoft on L500 security

  I am using a satellite L500-19U

  After the installation of Microsoft security updates the FN lost their function except the brightness keys + /-function.
  also the function keys that appear on the upper border of monitor by pressing the FN key appear after the security packages have been installed.
  I solved the problem by removing the update through the function of W7 (Wiederherstellungs punkt) back.

  The following security packages are selected to be installed:
  Update security for Windows 7 for x 64-based systems (KB978601)
  Update security for Windows 7 for x 64-based systems (KB979309)
  Update security for Windows 7 for x 64-based systems (KB979683)
  Update security for Windows 7 for x 64-based systems (KB980232)
  Update security for Windows 7 for x 64-based systems (KB981332)
  Windows MRT x 64-April 2010 (KB890830) (malicoius software removal tool)

  Which of them are unsuspicios, which must be postponed, the updates are necessary after installation, updates?

  Post edited by: JoJo58

  Hello

  If you read about these update on the Microsoft website: (not of them should affect the FN keys)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=998164b7-4B8C-468B-8d39-f242633c8838

  I checked the history of updates on my computer and all of them are installed with the exception of Windows MRT x 64-April 2010 (KB890830) (malicoius software removal tool). Everything works correctly, try to remove this update.

• recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  recommended security cumulative ie8 and compatible display updates fail. can install it with the installer of standalone download but then ie8 does not connect. If I remiove update ie8 works very well

  Hi mikedav,

  Thank you for using the Microsoft Windows Vista Forums.

  Method 1:

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  If you are not able to connect to the internet after you install the update, you need to optimize Internet explorer by following the instructions below.

  Method 1:

  Follow the instructions in the link below which will help you solve the problem.

  Tips for solving problems with Internet Explorer

  http://windowshelp.Microsoft.com/Windows/en-us/help/8038f9ac-9bf9-4809-8d75-fc42818d8af71033.mspx

  Method 2:

  Follow the instructions in the link below to optimize Internet Explorer.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP