'Unknown devices' after downgrad from Vista to Windows XP on Portege R500?

Similar Questions

• Portege R500 - 4 unknown devices after downgrade from Vista to XP

  Hi all

  I've downgraded a R500 from Vista to XP Pro SP2 and installed all drivers from the support page in the correct order, even in the device manager are always 4 unknown devices called 'data Interface '. Their hardware ID is:

  USB\VID_0930 & PID_1302 & MI_00\6 & 2EDD84F6 & 0 & 0000
  USB\VID_0930 & PID_1302 & MI_01\6 & 2EDD84F6 & 0 & 0001
  USB\VID_0930 & PID_1302 & MI_02\6 & 2EDD84F6 & 0 & 0002
  USB\VID_0930 & PID_1302 & MI_03\6 & 2EDD84F6 & 0 & 0003

  All 3 USB ports operate normally and at full speed, the Interface of data got to be something else.

  Thanks in advance for any advice or help

  Hello

  These are the modem and the features of com of your compilation in the 3G module.
  Unfortunately the drivers are not available on the European download page now.
  I guess it will take a few days until that pilots will be released.
  Please see http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp for this.

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• TS-l663b cd/dvd "device cannot start code 10" after uppgrade from vista to windows 7 home

  Compaq CQ60-216DX

  Hi, I've updated from Vista to Windows 7 Home, and now the CD player is missing and displays an error code "10" DEVICE cannot NOT START, under Device Manager.

  Looked for the drivers updated on the HP Support, there is none for CD player.

  Cannot back driver, grayed out.

  Restore opportunity to go back 2 months and still no progress. Installed software recently withdrawn from the HP (C5280) printer as well.

  Immediately after the upgrade, the CD player worked fine. Same load of music in iTunes.

  I am at a loss. Any ideas?

  Thank you

  Fabe

  Paul, thanks for the quick response!

  Although the tool automated fix - It did not tour, the link you provided, was told in the right direction.

  http://support.Microsoft.com/kb/314060#win7fix

  It seems that it is a well known problem of incompatibility between the TS-L663B with the Windows 7 upgrade.

  I just had to read the Let Me Fix It Myself solution because that relates to Windows7 and change the registry.

  Thanks again,

  Problem SOLVED!

• Unknown device after upgrade from windows 7 to windows 8

  My laptop is a Pavilion m7 1015dx

  I just upgraded to windows 7 to windows 8 and everything went well. Now after installing all the drivers updated for my particular laptop, I have a unknown device in my device manager.

  The hardware Id are:

  ACPI\VEN_HPQ & DEV_6001
  ACPI\HPQ6001
  * HPQ6001

  I don't know what it is or a driver for it.

  No matter who else knows it or know what this device and where I can get a driver for it.

  Much appreciated!

  Hey thought I'd tell someone on the Microsoft Answers site found the driver. It is the wireless button driver.

  Here is a link for the driver:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58720.exe

  Here is a link to the MS Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/unknown-device-after-upgrading-to-Windows-8/e46bfb7a-70cb-42be-B21C-9b6688b68009?page=4&TM=1351432666168#LastReply

  Thanks for your help.

• x 200 Wireless does not work after downgrading from Vista to XP - please advise

  Information system: x 200 74553YG / Windows Vista business product key

  Question: Used the recovery CD to downgrade from Vista to XP - downloaded all the drivers and updates to the operating system. everything worked except LAN wireless. Tried all possible ways to solve this problem (re download drivers)

  Your support and recommendation are highly appreciated

  so, there is no unknown device in the list? go into your bios and see if the wireless is turned on there or not.

• HP DV5 - 1235dx Downgrade from Vista to Windows XP start up problem

  Hi, I tried to downgrade from vista to XP and restarting the laptop after copying all the files from the XP CD, appears "Error loading operating system".

  After that I tried to restart my laptop and it freezes at the first screen which appears 'HP, press ESC to load BIOS' and I couldn t be able to access the BIOS.

  I Don t know what I can do! Please I need help.

  I tested my laptop computer with another HD and started normally but when I put my HD didn t do anything. I think the BIOS that my HD had a problem so I can´t use it.

  The specifications of my laptop are:

  Product number NB163UA #ABA

  Microprocessor 2.00 GHz Intel Core 2 Duo Processor T6400

  Microprocessor Cache 2 MB L2 Cache

  Memory 4096 MB

  Memory max 8192 MB

  Video Graphics Intel Graphics Media Accelerator 4500MHD

  Video memory Up to 1759 MB

  Hard drive 320 GB (5400 RPM) Western Digital (I bought a new)

  Multimedia player LightScribe SuperMulti 8 X DVD±R/RW with Double Layer Support

  Display screen 15.4 "diagonal WXGA high-definition HP BrightView Widescreen (1280 x 800) screen

  Fax/Modem Modem 56 k high speed

  Network card Integrated 10/100 Ethernet LAN

  Wireless connectivity

  • 802. 11 b / g WLAN

  Sound Altec Lansing speakers

  Keyboard 101-key compatible

  Pointing device Press the button with On / Off button and dedicated vertical scroll up/down pad

  PC Card Slots 1 ExpressCard/54 Card Slot (also supports ExpressCard/34)

  External ports

  • 5-in-1 Integrated Digital Media Reader for cards Secure Digital, MultiMedia Card, Memory Stick, Memory Stick Pro, or xD Picture Card
  • 4 universal Serial Bus (USB) 2.0, 4th port shared with eSATA
  • 2 headphone
  • 1 microphone input
  • HDMI
  • 1 VGA (15-pin)
  • eSATA + USB 2.0
  • 1 RJ-11 (modem)
  • 1 RJ - 45 (LAN)
  • expansion port for computer 1 cell 3
  • 1 consumer IR (remote receiver)

  Size 14,05 "(L) x 10.2" (D) x 1.37 "(min H) / 1.65" (maximum H)

  Weight 5.83Ibs

  Security

  • Location of Kensington MicroSaver lock
  • Turn on the password
  • Accepts 3rd party locking safety devices
  Power
  • 65W AC adapter
  • 12-cell Lithium-Ion battery

  What is in the box of

  HP Mobile remote control
  
  HP Webcam with integrated microphone

  Hi Daniel,.

  I tested my HARD drive in the other laptop and it starts normally, I did format and then I put in my laptop. I tried to install XP and everything was successful. I could install XP. I am very happy and I did not buy a new HARD drive.

  You are awesome!

  My problem was solved!

• Downgrading from Vista to Windows XP Home in Satellite P200-16 b

  Hi people!

  I wonder if someone has already tried to downgrade from Windows Vista to Windows XP. I have a Satellite P200-16 b.
  I was check in the support Web site and I found most of the pilots it but I think not all.

  Please post your comments here.
  Thank you
  E

  Hello

  I used the search option and found many threads on the downgrade from Vista to XP on Satellite P200 PSPB0E

  All Toshiba drivers are published on the European driver Toshiba page.
  Of course, you won't find additional software and programs like WinDVD, etc. insofar as these software are only a part of the Toshiba recovery image and as I guess are not to free them.

  An important note; you need to install XP drivers as mentioned in the installation instructions txt file. This doc is also found on the Toshiba driver page!

  Then you should not get any trouble of installation.

  Best regards and happy new year 2008 :D

• Satellite L300 PSLB8A - cannot locate the WLan adapter after downgrading from Vista to XP

  Model - L300 Satellite PSLB8A-01F004
  Australian model
  Place of residence current UK

  Happy new year to you all. I have a problem with the adapter wireless following a downgrade from Vista to XP Pro home. Device Manager indicates that a network adapter, which is the LAN and it does not work properly.

  I have two points with one exception - Ethernet controller and Modem on Bus High Definition Audio device.

  I find all the major engines of the Toshiba Australia but he lists three (I think) site possible WLAN - Atheros, RealTek, and one of the other manufacturers.

  I tried all three without success but am willing to acknowledge that I can have a mistake, perhaps by installing all three drivers at the same time for example.

  The indicator on the front of the box portable wireless lights on or off with the hard switch setting.

  I am also unable to locate the display of all available wireless netrworks, this can be a symptom of the driver is not installed.

  I tried to locate the wireless card, but it doesn't seem to be accessible through the background panels, including the Panel of RAM module.

  Any ideas please?

  > I have two Articles with one exception - Ethernet controller and Modem on Bus High Definition Audio device.

  The Ethernet controller is the WLAN adapter.
  I guess that the WLan driver is missing and so the wireless network card does not appear under network adapters

  Please check this Toshiba How TO:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78

  This will help you find the right WLan driver for this chip.
  and here you can find the drivers:
  http://APS2.toshiba-tro.de/WLAN/

  good luck and good news 2011 ;)

• Windows install-"error 1325 - 'Documents' is not a valid short file name"; After upgrading from Vista to Windows 7, cannot load new software. ____

  After an upgrade from Vista to Windows 7, everything on the system seemed to work properly. up to what I tried to re - install everything deleted software or install new software.  As soon as Windows Installer starts the following error message appears: "error 1325 - 'Documents' is not a valid short file name.

  If this could have something to do with the new pads MSFT security permissions on folders (with padlock) during a upgrade as well as related hidden junctions by compared to the user by the system?

  I tried to install the update system of Lenovo and MSFT Windows Installer Clean Up clean in the hope that the software would help alleviate my problems. See below the link on advice from MSFT on the same error.

  http://support.Microsoft.com/%2Fkb%2F328162

  Unfortunately, I cannot even load the previously recommended THAT MSFT software to solve this error.  I also tried to install the software as 'Run as Administrator' and in 'Safe Mode '.  Even if I could not load the software recommended to MSFT, I was able to install iTunes to Apple through Apple Software Update, I guess, that they do not use Windows Installer.

  With the new structure of junction there is several files or links to the same folder across file system, if it is a folder authorization number which specific files/links are I need to remove restrictions?

  Any help would be appreciated, if not I'll have to do a clean install and individually reinstall each piece of software... Thank you.

  I think I found the solution for this point, because I have just encountered the same problem in our environment and here's what I did to solve it:

  -Create a higher level permissions at the root of the folder redirection (for example \\servername\mydocredirfolder): grant the Group authenticated users the following permissions and apply it to "this folder only" ALLOW: list folders/read data, reading, reading attributes, read extended attributes, create files / add data

  I think the MSI is trying to read the free space on the disk on the server, but it cannot because it tries to access the folder where your my documents redirection is sitting.

  Good luck!

• How downgrade from Vista to Windows XP

  Hi, recently buy recon HP pc, works well but has Vista installed. I compose music and found that the thing does not like Midi puts and on-site. I want to downgrade to good old windows XP, as it does not, please what is the process to achieve this? IM no PC illiterate, so please don't advise me to change the registry, etc. Thanks John

  If you don't have your own copy of Windows XP that you do not use on another machine, you will need to find someone who will sell you a. This must be a full retail do not copy the recovery disc that distribute computer with preinstalled Windows systems manufacturers. This will be limited to a particular machine. You will also need to go to drivers and downloads from the HP Web site and check if HP provide XP drivers for your model. If they are not, you will have problems of implementation.

• can I downgrade from vista to windows 98xp

  can you switch from Windows vista to windows xp

  Yes.

  Install Windows XP to the usual. To activate it, you will need to use the phone-in method and explain that you use your right of demotion. The person will guide you through the activation process. You may not use the Vista operating system whose key you use for the XP install on any computer.

  I suspect it's a typo, but just for clarity: Windows 98 and Windows XP are different operating systems.

  Tom Ferguson

• Need drivers for unknown devices after downgrade xp

  Hello

  Ive followed guide Cheryl downgrade my CQ40-415 AU to XP. Worked like a charm... Thanks a lot for this...

  I was wondering if someone could republish the drivers for unknown devices 7...

  Current link is dead. Ive tried looking for an alternative, but nothing helps...

  Original drivers link:

  Unknown devices (buttons drivers),
  http://www.mediafire.com/?nnnzjmojcjy

  If anyone has the please repost...

  Thanks for help and congratulations! for the guide

  Sorry for the broken links. We work to upgrade several links in the guide.

  Unknown devices ICI

  Most recent ENE CIR (infrared receiver) ici

• After downgrading from Vista Satellite L30-101 does not read DVD

  Hey,.

  Like many people, I didn't like Vista and so returned to the use of Windows XP.

  In doing so, I lost a lot of things like the ability to watch DVDs and sound, most of these problems fixed so easily by downloading the drivers from this site.

  However, even after the DVD driver download I can't read DVDs yet.
  When you try to play through Windows media player I get say error message that I did not have a MPEG-2 decoder, in the section web site help, it suggests where to get one, but you have to play for each other.
  After having one in the first place, I don't think I should buy a new one.

  If anyone has a solution it would be greatly appretiated if they could let me know.

  Thank you

  PS I have a Satellite L30-101

  I think you have a codec problem, but I'm not sure. Maybe you should install the latest version of Media Player and codec Xvid, DivX and AC3. These are free (google it!). Or you can try alternative software, such as WinDVD or PowerDVD, you can try the demo versions.

• Downgrade from Vista to Windows XP on Satellite A300

  Join Satellite A300 disc to downgrade to windows XP. However, information for it is almost impossible to follow because it implies that I am a computer Wizard.

  I bak up to Vista as asked and then rebooted computer all holding the key F12. Put in the #1 lower upgrade disc and then it confuses me what to do. This machine is brand new and I have no files to backup, but want to use XP because I'm more familiar with this OS.

  So can someone guide me through this... as I am in Australia and most of you people are probably asleep or just waking up, please put all the instructions I am about to go to sleep because it gives me a headache. If someone had told me that it was not a simple exercise, I would never had bought the laptop in the first place.

  Thanks for any help

  Bye now

  Hi Bushbabe

  Yes, this can be a bit difficult. Here are some easy instructions on how to use XP disks. :)

  1. Insert the xp disk into the disk drive.

  2 hold down the power button on the computer for 10 seconds to turn it off completely.

  3 turn on the computer and start typing on the F12 key. Keep pressing it until it gives you your Start menu. (Don't hold the power button, type only just turn on the machine.)

  4. Select CD/DVD using the arrows on your keyboard, and then press ENTER. Should say 'Loading RAM disk image' or something similar.

  5. Select Yes on the warning screen (make sure you computer is connected to the main power, no battery).

  6. Select following three times.

  After that, it will say Partition initialization... This means that the recovery has begun. :)

  Hope this helps!