Unknown devices (PCI bus 9, device 9, function 2, function 3)

HP Pavilion dv6699ed

After a clean install of Windows 7 Ultimate 32 and drivers/software updated for the quick launch buttons and fingerprintdevice, I still 2 unknown devices:

Bus PCI 9, device 9, function 2

Bus PCI 9, device 9, function 3

For both devices, it shows that the drivers are not installed.

Can you help me by saying what are the devices and drivers, I need to install?

Thanks in advance.

Frans

Message edited by cowkof on 01/12/2009 09:29
Message edited by cowkof on 01/12/2009 09:58

Install the HP Vista card reader driver for your model to solve the problem with the Base system device:

Ricoh 5 - 1 card reader driver here

When there's some sort of problems with installing and then try to run in Vista compatibility mode.

Resources:

How to run a program in Compatibility Mode in Windows 7

Make older programs in this version of Windows

Tags: Notebooks

Similar Questions

  • PCI bus 0, device 2, function 1

    Hello

    I have a problem with my video controller device driver after installing windows 7 (from windows xp)

    information about the location: PCI bus 0, device 2, function 1

    Hardware ID: PCI\VEN_8086 & DEV_2792 & SUBSYS_3081103C & REV_03

    Full name: other devices / unknown device

    My laptop is: Hewlett Packard Pavillion dv 4000 (Ek919EA #ABH)

    Properties: The drivers for this device are not installed. (Code 28)
    The installation failed because a function driver was not specified for this device instance.
    Please help me to find and download
    Thank you

    Hello:

    Download and run this file.  You will probably get an error not supported operating system.

    FTP://ftp.HP.com/pub/SoftPaq/sp34501-35000/sp34749.exe

    Conclusion of any windows error.

    Go to Device Manager and click on the device video controller requiring driver.

    Click the driver tab.  Click on set to update driver.

    Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.

    This file will be located in C:\SWSetup\sp34749.

    Make sure that the include subfolders is selected and the driver should install.

    Then, restart and graphics need to be working very well.

    Not that Windows Aero is not supported on this model graphics card.

  • Satellite A100-926: unknown device bus pci7; device: 6; function: 3

    Hello world

    I have an A100-926, device management, it shows me that there is an unknown pci device on the bus 7. function 3, but there is no way to know what is it and how can I install it because if I Reinstall driver it don't think the right on the toshiba tool cd.

    I don't know if it is related to that but in an application, the button Delete must pushed me for longer than a second to work :-(
    Is there anyone who can help me?

    Thank you

    You reinstall the operating system on your laptop?

    Generally, the laptop is delivered to the image of Toshiba and there should be some unknown devices in Device Manager

    In the forum guys have put the link to the very useful document from Toshiba.
    It describes how to identify the unknown devices.
    http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

    Maybe this will help you to know which unit it is.
    Then, you can download the right driver from the Toshiba page

  • HP compaq 6730 b: unknown device on pci-bus code 28 / unknown device on Microsoft ACPI-Complia... (ACPI\HPQ0006)

    Win.7 bit 64 pro HP 6730 b

    Unknown device on Microsoft ACPI-compliant system code 28

    Unknown device on pci-bus code 28

    Hello:

    You need the driver for this device...

    This package contains the software that allows the HP Quick Launch Buttons, which are special function keys on HP laptops. This software works with the notebook models that are running a supported operating system.

    FTP://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49104.exe

  • HP COMPAQ 6200 PRO SFF PC: Bus PCI 0, device 31, function 3 DRIVER

    I HAVE A PC HP COMPAQ 6200 PRO SMALL FORM FACTOR I KEEP GETTING MESSAGE ' CAN FIND DRIVER FOR CONTROLLER of BUS SM THE DRIVER IS: PCI bus 0, device 31, function 3 WHERE CAN GET THIS DRIVER? Thank you

    Hello:

    Download, unzip and run the file setup.exe from the link below... then reboot the PC.

    https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

  • Pavilion dm4-2191us: drivers required for the PCI, SM bus, PCI, Ethernet, two unknown devices communication device

    PCI device:

    PCI\VEN_10EC & DEV_5209 & SUBSYS_1650103C & REV_01

    SM Bus controller:

    PCI\VEN_8086 & DEV_1C22 & SUBSYS_1650103C & REV_05

    Simple PCI communications controller

    PCI\VEN_8086 & DEV_1C3A & SUBSYS_1650103C & REV_04

    Ethernet controller:

    PCI\VEN_1969 & DEV_1083 & SUBSYS_1650103C & REV_C0

    Unknown device:

    ACPI\HPQ0004

    Unknown device:

    USB\VID_138A & PID_0018 & REV_0078

    Hello

    PCI\VEN_10EC & DEV_5209 & SUBSYS_1650103C & REV_01

    http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54169.exe

    SM Bus controller:

    http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54125.exe

    Simple PCI communications controller

    http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54162.exe

    Ethernet controller:

    http://ftp.HP.com/pub/SoftPaq/sp54001-54500/sp54121.exe

    ACPI\HPQ0004

    HP 3D DriveGuard software - drivers & software

    Unknown device:

    http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50862.exe

    Concerning

  • Z820: Z820 Windows 10 question - pci bus 0, device 22, function 3

    HI guys! Try to set up a fast enough for 4 k machine NLE here, began with a refurb Z820. Managed to get 10 Windows running without much of a fight. One last question, that I can't understand and I watched and read until my eyes covered in blood with no posotive result.

    In - other devices - Pci Serial Port Device Manager.  I have a Pci bus 0, device 22, only function 3 no error driver installed. As far as I know I installed all the drivers, updates, etc., etc... at least two times.

    As everyone on this forum has more experience with HP workstations then I thought that I would return it to the wiser.

    Thank you for your help.

    o.k. now.

    Retrace my steps, always a good thing when lost and confused, I realized that when I installed the Intel sp744499.exe management software, I didn't follow directive and that run the extract program of it is installed destination! Down & here when end of step B as written in the release notes, you no longer have to fix the latter on issues. Lesson learned - read all the instructions you can find, including the release notes.

    Thanks again to Paul who tried to save my sight.

  • T60 unknown device, PCI Device, SM Bus

    I just did a fresh XP on my T60 facility and I have 3 devices that are not the installer, even if I installed the 1 chipset driver. They are unknown device and SM Bus PCI device. My # is 200755U product. Can anyone help?

    Managed to find the unknown device is the Atmel TPM. Driver installed, but I'm a yellow question mark on Atmel TPM which is strange because there are 2 of them and only 1 the question mark. I installed the drivers for audio modem and ethernet, but knone of work. Looks like the pci device is the sound card. Could someone give me please comments here. It's my 1st laptop IBM and it makes me nuts trying to give a sense the countless drivers who must be installed.

  • error system PCI bus/device/function 000 h, then again with the number 0200 h

    last night when I went down tmy computer and is gone sleep on that I left it and it usuallty just goes to sleep. Today, I am home from work to try to remove the mode "Eve". It wouldn't even turn it off and turn it back on to notice that my computer somehow managed to delete the operating system. so I don't have xp on my computer. I can not even access bios to check if something I messed up. So I decided to try booting with the disk. and this is where im stuck. I'm quickly beginning to hit 'r' to reformat the computer and install an operating system. He goes through when he's trying to do. I'm prompted with the error message
    System error ' PCI Bus/device/function 0000 h.
    PCI Bus/device/function 0200 h system error. "

    After a few minutes of doing nothing it says under that
    "Hard disk write error!

    Press a key to continue. "

    now, I thought that the memory of my laptop may be losing the connection. I've checked everything and it's all warm in its place even the hard drive.

    is there anyone who can help me?

    Hi DrewHuble,

    Given that you have made to the formatting when you are prompted, it looks to the operating system is removed.

    If you have important data on the computer, I would say that you wake the computer to any tech store to back up data and then reinstall Windows XP on the computer.

    Install, reinstall, or uninstall Windows

    http://Windows.Microsoft.com/en-us/Windows/help/install-reinstall-uninstall

  • HP Envy 17-3077NR - bus PCI 10, device 0, function 0 (Code 28)

    Greetings!

    Hey, I have a HP Envy 17-3077NR, installed a cost of Windows 7, I'm sure that I installed all drivers 64-bit HP drivers page, yet "PCI Device" is always on view under "Other devices" with yellow exclamation point. I checked the properties and it says ' bus PCI 10, device 0, function 0 (Code 28). Nothing helps, I have re-installed Realtek Card Reader, Ethernet and Bluetooth. Please help as I am setting up this device for someone else and you want to do things.

    Thanks in advance!

    Hello

    You are welcome

    The hardware id is for the Realtek card reader driver, so I suggest to try to reinstall it from the link below.

    http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56908.exe

    Once completed, restart the laptop.

    When windows has reloaded, check device manager again.

    Best regards

    DP - K

  • Update driver for the location of the controller bus PCI 5 network, device 0, function 0 code 28

    location PCI bus 5, device 0, function 0 code 28

    Hello Mark135,

    Thank you for your message.  Go to the Web site of the manufacturer of your computer and download/install the latest network driver for your computer operating system.  Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • End of driver Dell xps l502x dinosaur. device function 0 PCI bus 5 0

    Had to rebuild my xps l502x because it has been 5 months out of warranty and crashes due to overheating had begun to bother me.

    Clean the entire computer, threw it all back together and for some reason task bar icons is not photos, will not open volume mixer controls, and I have 3 "missing" device base system all say PCI bus 5 driver function 0 0.

    Are they related? and how can I solve this problem?

    Hi gcustoms,

    Please share the installed operating system. It seems that the Chipset drivers are missing. Here are the steps that you can follow to install the drivers:

    • Click the http://dell.to/18NmI2Dlink.
    • Enter the serial number of your system, and select the operating system.
    • Under the section of Chipset, you will find all the drivers you need to install following:
      • Intel Huron River (HM67)
      • Renesas USB 3.0 host controller driver
      • JMicron JMB389 card reader

    Restart the system and check if the problem persists. If so, then share the screenshot of the Device Manager with all the appliances expanded so that I can share the correct set of drivers with you. Here are the steps to access the Device Manager:

    • Press the combination of keys Windows Logo key + R key to open the dialog box run.
    • Type devmgmt.msc, and then click OK.
    • The windows Device Manager appears.
    • Click the sign next to network adapters and expand it.

    I hope this helps. Just reply with the results.

  • Unknown device - Bus PCI - ACPI\SMO8800 / ~ SMO8800 - IRQ 0 x 00000017 (23)

    Hello

    My computer is a Dell Latitude E6320, and I am a user of Windows 7.

    I have a unknown device in my device manager. I tried to update the driver, but windows doesn't know of him as I am not able to uninstall / remove.

    Help please.

    Thank you.

    The fall free sensor http://ftp.dell.com/FOLDER01168946M/1/Chipset_Driver_XWJWG_WN_4.10.0036_A05.EXE

  • HP DV6-6c35dx unknown device drivers and 61883 class bus

    Hi people, I'm still pretty new to these forums, please bare with me. I have a Hp DV6-6C35DX model # UJ8B1/A6Y53UAR - #ABA). Processor: AMD A8 - 3520M APU with Radeon HD Graphics Quad Core.

    I need a couple of device drivers for the following, as shown in... Device Manager if I had to guess, I suspect that errors apply to the two USB 2.0 slots because him do not work. If someone could point me in the general direction, I would be very grateful.

    1 device Type: 61833 Device Class...  Geographical area: PCI bus0, device16, function 0...

    Driver date: 21/06/2006

    Version 6.1.7600.16385 driver

    Environments with limited resources: this device isn't using any resources because it has a problem.

    This device cannot start. (code 10)

    2 unknown device... Location: Bus PCI 0 device 16 function 1

    The drivers for this device are not installed. (code 28)

    PCI\VEN_1022 & DEV_7812 & SUBSYS_358B103C & REV_03

    PCI\VEN_1022 & DEV_7812 & SUBSYS_358B103C

    PCI\VEN_1022 & DEV_7812 & CC_0C0330

    PCI\VEN_1022 & DEV_7812 & CC_0C03

    You are the very welcome.

    See if the installation of the two drivers below solves this problem of usb 3.  Driver chipset normally done as you can see it includes usb 3.0 drivers, but sometimes it doesn't.

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5359417&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • ProBook 6570b: screen brightness works do not, the unknown device on PCI

    Hello

    I have a Probook 6570 b with processor i5 here. He is running on W7 x 64 professional. As in all computers, we decided to replace the hard drive for an SSD. After replacing the hard drive and reinstallig W7 and drivers, there is a problem that I can't fix. It seems that I can't get the Fn keys for brightness screen work. The others work, volume gives a nice popup, evenso buttons additional display.

    Unplug the power supply makes the screen dim brightness. Who works. In the energy configuration screen, I can also adjust the screen brightness properly. Only the driver for F9 and F10 does not work.

    I don't know if it's related, but in Device Manager, I get an unknown device on a PCI bus. I have not been successful in finding drivers for this one as well. In the detailed tab, it says: * HPQ6000

    Thanks for responding!

    Hello:

    The 6000 HPQ needs this driver...

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212930&swItemId=ob_124200_1&swEnvOid=4059

    Have you installed the graphics driver and hotkey?

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5212930&swItemId=ob_129672_1&swEnvOid=4059

    I can't give you the graphics driver because your laptop can come with 2 different graphic configurations.

Maybe you are looking for