unknown driver for unknown devices must be installed.

Whenever I reboot, unknown drivers for unknown devices must be installed.  Camera card reader will not work.  All work USB devices are not recognized.

Hello

Have you made changes on the computer before this problem?

I would suggest trying the following methods and check if it helps.

Method 1:

Run the fixit from Microsoft Fixit article and if that helps.

Hardware devices do not work or are not detected in Windows:

http://support.Microsoft.com/mats/hardware_device_problems/en-us

Method 2:

Try the steps in the following Microsoft article and check that you get pop-ups.

Tips for solving problems of USB devices:

http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

And also make sure that you have installed drivers updated to the device works correctly, as for the card reader for camera. For the correct drivers you can try to contact the manufacturer of the computer.

Hope the information is useful.

Tags: Windows

Similar Questions

  • Standard VGA graphic card: this device cannot start. Driver software (code 10) __Update: best driver for your device is already installed .__Windows has determined the best driver for your device software is up to date. ___

    Recently a support ACER technician kindly accompanied me the steps to uninstall the service in standard VGA graphics adapter before driver software he knew that I don't have an internet connection to download the ACER software (for an external monitor). I didn't download the ACER software and the original VGA utility software does not work. I was instructed to restart the computer and when I did it launched automatically install the factory driver, but now I have the error code. I tried updating the driver software but windows says it is the best software for my computer and it is updated. I did uninstall and restart. How can I get the Standard VGA adapter driver utility graph to work again?  I have a Sony VAIO Vista laptop. Help, please!

    Go to a computer that has Internet access - like this you obviously - post and download the video drivers Acer. Put it on a USB key and bring them to your home computer. Install them. MS - MVP - Elephant Boy computers - don't panic!

  • I have a wireless HP printer which I can not complete the installation because I get an error message ' USB 2. OWLAN Code 28 driver for this device is not installed

    I uninstalled and reinstalled the CD for installation on a HPJ610 wireless printer.  I still can't print.  All I get is the error message above? Then I try to find it and it tells me that it is not installed?  What should I do now?  Does anyone know.

    I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

    You can also run the troubleshooting of the printer.

    Open the printer Troubleshooter

    Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

    For more information, visit the below mentioned link:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx
     
    Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

    You can see the below mentioned links.

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

    http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

  • Microsoft Bluetooth Notebook Mouse 5000 installation error: "problem installing the driver for the device software - file to install the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or la

    Original title: Microsoft Bluetooth Notebook Mouse 5000 install problem

    I have a LG S1 Pro Express dual computer with vista sp2. My Bluetooth Notebook mouse 5000 can be coupled to my computer, but after pairing, it will say "Device Bluetooth HID - ready to use" and "unidentified - device failed. It then opens a window saying "problem of installing the software driver for the device - driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or later. »

    I checked some things here and read about intellipoint 7.x and installed but it still does not work. This used to work before mouse

    Hello
     
     
    The drivers that you try to install seems to be corrupted. Let us fisrt remove all traces of the software driver for this device in the Device Manager and then install the drivers from the manufacturer's Web site.
     
    Step 1.
    You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
    I would also recommend to check if there are Windows updates for this device.
     
    Step 2.
    Here is the link to download the latest drivers.
    http://www.Microsoft.com/hardware/download/download.aspx?category=MK
     
    Select the type of product like "Mouse" and select the product as "Notebook Optical Mouse" and your version of operating system and the language of the operating system.
     
    This page will direct you to a link to download the IntelliPoint software, which is the software of the mouse.
     
    For more information see the links below.
     
    I hope this helps.
     

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28).

    Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.

    Hello

    Thanks for posting in the Microsoft Community.

    I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.

    I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.

    There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.

    • Remove or reconfigure newly installed unit.
    • Restore the version before your driver update.
    • Use system restore to undo recent changes in Device Manager.

    Step 1: Roll back the driver to the version before your update.

    If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:

    http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7

    When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.

    I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.

    Tips for solving common driver problems:

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

     

     

    Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.

    Thank you.

  • Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

    So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

    Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

  • Impossible to install the mouse, the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver.

    Hello

    I recently bought a windows mouse (Microsoft wireless mobile mouse 1000). When the connection of the transceiver nano in my computer it is unable to install the driver.

    I tried many fixes but none work, I downloaded the driver from the website driver Microsoft but the mouse still does not work.

    When you install the driver he always says "the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver. »

    Why would access denied?

    Any help would be great.

    I am running Windows 7 Home Premium

    See you soon

    Robert

    Hi Robert,.

    You receive this error during the installation of other USB devices?

    Usually this kind of error messages happen when we are not connected as an administrator.

    You can read the following article and check if that helps.

    Code 28: The drivers for this device are not installed

    Please return to the State of the question.

  • Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

    Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

    I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

    Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

    This solved my problems. Good luck with yours.

  • Error code 28 'the drivers for this device are not installed' for Seagate ST905004EXA101 - RK 500 GB hard drive.

    Original title: Windows7 does not recognise seagate expansion drive.

    Expansion drive model: ST905004EXA101 - RK Seagate 500 GB

    Microsoft Windows 7 website says that it is supported.

    The drive works in another laptop with Windows XP.

    Try installing in another laptop with Windows 7 Enterprise SP1.

    In Device Manager, I get a message "the drivers for this device are not installed. (Code 28) »

    Hi PinakiDeb,

    You can follow this link & check if the problem persists.

    http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201235&NewLang=en.------

    Hope the helps of information.
    Please post back and we do know.

  • Code 28: The driver for this device (\Device\NTPNP_PCI0017) are not installed.

    Original title: \Device\NTPNP_PCI0017

    What is the way:

    The drivers for this device are not installed. (Code 28)

    To reinstall the drivers for this device, click on reinstall.

    1. Name of the physical device object is: \Device\NTPNP_PCI0017
    2. Description of the device: SM Bus controller

    Thank you.

    Hello

    1. When you receive this error message?

    2 have you tried reinstalling the drivers?

    Error Code 28 is one of several error codes in Device Manager.

    Details such as Code 28 Device Manager error codes are available in the device status area in the properties for the device:

    The status of each hardware device recognized by Windows is available at any time in the Device Manager. This report contains the current state of such material as seen by Windows.  Check the status of the device should be the first line of conduct, if you suspect that a particular device that is causing a problem or if any device in the Device Manager is marked with a yellow exclamation point.

    Get help with Device Manager errors

    http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

    Thank you

  • Error installation software device driver for removable devices in Windows Vista x 64

    I have Windows Vista x 64 installed on my PC and nVidia Forceware motherboard and graphic cards.

    When I plug in any removable drive into my USB 2.0 port, Windows starts the installation of the device driver software and then sees it as an unknown device. The dialog where he asks me if I want to 'locate and install driver software', 'Ask Me later' or 'don't show this message for this device.

    I select the recommended option: "locate and install driver software.

    I click 'Continue' when Windows asks me permission to continue.

    Then, when the execution of the installer of the software in the bottom right of my screen, the installation of driver software for device, it shows "unidentified device failed.

    Then another window pops up saying this:

    "Found New Hardware - device unknown".

    Windows encountered a problem installing the software driver for your device

    Windows found driver software for your device but encountered an error trying to install it.

    Kodak

    An error occurred during the installation of the device:

    The driver for this device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

    If you know the manufacturer of your device, you can visit their website and check the support section for driver software. »

    That's what he does when I'm trying to connect my Kodak Easyshare M550 digital camera. I would go ahead and contact Kodak, but the problem seems to extend to ANY removable device on my computer.

    For example, I have a Lexar Flashdrive. When I plug it into my USB 2.0 port, it Windows says the following:

    "Windows needs to install driver software for your USB Flash Drive", etc...

    'Install the device driver software', 'USB Flash Drive search Windows Update'...

    Then a window opens asking me to "insert the disk that came with your USB key. Problem is that no driver disk not supplied with the hardware that Windows Vista is supposed to come with the drivers. I know this because the camera and usb flash drive worked very well until I reinstalled Windows Vista on my new hard drive (new installation, because my old hard drive crashed) and I've NEVER had to install device drivers for Windows to recognize it as a removable drive and operate automatically.

    Also, I installed Daemon Tools Lite and I had to manually "Update" the device driver to point to the "Windows\INF" folder in my hard drive, after copying the cdrom files needed for the specific subfolders for windows to let the program assign a drive letter for the drive virtual it creates.

    I think that perhaps not all device drivers have been installed when I installed Windows Vista, this time. If that's the problem, I don't know how that could happen, nor how to fix it, but I really prefer to find a way to solve this problem without reinstalling Windows Vista again. I don't mind not manually install the drivers as long as someone can show me what files to copy and where to find them on the Windows Vista disk that I bought at Microsoft. I KNOW that Windows HAS come with these drivers.

    If anyone knows how I can fix this, please tell me, because it's ridiculous to not be able to use any removable device readers (except for the use of all Flash drives). Thanks in advance.

    I know it can be frustrating to solve problems.

    (A) was this post or hibernation sleep?

    Microsofts troubleshooting KB

    http://support.Microsoft.com/kb/928631

    (B) the bios settings

    First of all you do not state if you tried to see if there was a setting in bios disabled USB ports during the startup. Or how the bios was set to install devices automatically. If you check your manual site or the motherboard manufacturer

    It will tell you which key to press. And where your USB ports are on or off. Some systems do not have to turn on or off.

    Plug n play OS on conscious

    could help Vista automatically recognize your USB

    (C) what version where do you use? SP1? or gold?

    (D) USB hubs may cause problems just be hubs. Power connected?

    (E) and of course if it is a case check connection in the right port. Return panel slide? plugged into port back?

    Hope something here helps

    Keith

  • The drivers for this device are not installed. (Code 28) for the ALL-IN-WONDER RADEON 7500

    I ran a windows update and a hardware update for ALL-IN-WONDER RADEON 7500 was available. I wasn't sure what it was, but I did research some information about drvier... or windows hardware and device driver has informed me that it detects what device(certain hardware) I have on my computer to install the update. (I don't know if it's true) anyway, since then, when I start my computer, the 'new hardware found' window. After investigating on I found it cause the ALL-IN-WONDER RADEON 7500 (I don't think I know what it is). There was my this info in my device (6 times) Manager: its an unknown device located in the ALL - IN - WONDER RADEON 7500 and it states that "the drivers for this device are not installed. (Code 28) "what is it and how to fix it." I don't know if I'm to disable or uninstall. As I said, these updates I got Windows update manager and I'm guessing that it was not successful.

    That is, what it does and how can I solve this problem?

    Thanks in advance

    Try to go to this link which is AMD and download the drivers for it.

    http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.5&product=2.4.1.3.14.3.2&ContentType=GPU+download+detail&OSType=Windows+XP+-+Professional%2fHome&keywords=&items=20

    The question to be a tunner TV that you have installed in your computer that is missing the drivers at startup. You receive the error because when your computer starts, it loads this device to make it ready for use, when you want.

    Good luck! Please rate me upward if you find my post helpful. Thank you!

  • Laptop HP 250 G2: the drivers for this device are not installed. F0Z43EA (code 28) - #ABT

    Hello

    I get this error:

    The drivers for this device are not installed. (Code 28)

    model: HP 250 G2 Notebook PC

    Model number: F0Z43EA #ABT

    PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C & REV_01
    PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C
    PCI\VEN_10EC & DEV_5229 & CC_FF0000
    PCI\VEN_10EC & DEV_5229 & CC_FF00

    How I solve the problem?

    thnx

    Hello:

    You need this driver for the card reader:

    Download and install the driver first on the list from the link below.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  • The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

    I HAV these two errors in my drivers and windows cannot update, can any body healp me?

    Hello

    What devices are - if you can not tell what is the name, then you can specify the category of
    Device Manager - or both?

    --------------------------------------------------------------------------------------------------------------------

    This device is not present, is not working properly or is not all its drivers installed. (Code 24)

    The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

    Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

    On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
    ---------------------------------------------------------------------------------------------------------------------
    The drivers for this device are not installed. (Code 28)

    To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

    ==================================================================

    Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

    References to Vista also apply to Windows 7.

    If they show upward then try to manually install the drivers.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
    to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Error code 28: the drivers for this device are not installed for Ethernet controller

    Original title: I received an error message for, controller ethernet, the drivers for this device are not installed. (Code 28)

    I don't know how to install the drivers for ethernet controller, and I don't think that I have a CD for it. And I don't know where to go.

    Hi jhawkerchic,

    1. What is the number of brand and model of your computer?

    To resolve this problem, you must install the latest version of the drivers for the device.

    You can check the manufacturer's website and download and install the latest version of the drivers available for the device.

    You can see the following article for more information about the error Code 28:

    Explanation of error codes generated by Device Manager in Windows XP Professional

    http://support.Microsoft.com/kb/310123

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Maybe you are looking for

  • Error code; 0xC004F050

    Unactivated product key.  I had this bridge for over 2 years with no problem.  I've updated my AntiVirus MicroTrend, one couple of days, and that's when the problem seem to start.  I don't know if she has nothing to do with it or not.  I've been runn

  • Lack of 180 GB of space on the hard drive?

    I have recently been downloading a lot of TV shows and I realized only 37GB left on my C drive. It is confusing to me, because my whole video folder only takes about 15 GB. Even my download folder, which is host to a large number of files that I stil

  • I don't remember much my Inbox web page not available which help me please thank you

    I can't open my mail web page not available make it's my tool box I'm blocked which can help me please thank you

  • Confusion over the number of tunnels

    Hi all I'm very confused about the number of tunnels formed in my ASA 5520. By CLI, I see two IPSec tunnels, but through ASDM, I get the data you see in the attached picture. Someone knows about it. Thank you VPN-ASA5520-BLUR # sh vpn-sessiondb summa

  • INTAIN1CBP-all-in-one card reader won't work

    I have a M501-1186-cutting USB 2.0 internal card reader internal Multi Card Reader. This is sapose to be a plug and play, but I can't make it work.