Unknown HP: restarted my laptop last night. It is still in restart 12 hours later.

I restarted my laptop last night. It is still in restart more 12 hours later.

loue161 wrote:
I restarted my laptop last night. It is still in restart more 12 hours later.

You need to press the power button for 5 seconds until you see all the lights turn off.  Then see if you can turn it back on.

Tags: Notebooks

Similar Questions

  • the screen of my iphone 6 is black since last night and it still does not

    The screen of my iphone of 6 has recently turned black. It does not work. I tried with everything: by pressing the main button and power that at the same time, connect to a computer and I ran out of options. I hope that this is not something difficult or expensive, as it is barely a month since I bought it.

    romuscavuzzo wrote:

    The screen of my iphone of 6 has recently turned black. It does not work. I tried with everything: by pressing the main button and power that at the same time, connect to a computer and I ran out of options. I hope that this is not something difficult or expensive, as it is barely a month since I bought it.

    Since we don't work for Apple or Apple here in this technical forum of user to user, schedule an appointment with the Genius Bar and enjoy your phone so that he was looking at.

  • Lightroom has stopped to move files on my external hard drive, it was working fine last night, but now I just get an error msg saying: he can't move them.

    Last night I started moving the external files on my PC hard drive internal to one of my hard drives for backup purposes. I've never had a problem in the past with older versions of LR but it's the first time I did it since arriving in LR CC. I moved several 100 RAW files last night with a problem, but as it was late, I stopped. I created LR move that several 1000 files today while I was only to return home and find that most of the files have not been moved and LR, saying that he cannot move them.

    I tried to move a small folder of files but I get the same result, I'm quite puzzled by what worked yesterday doesn't work not today or the same as the older versions of LR. Any help to fix this would be greatly appreciated.

    Thank you very much

    Neil.

    Arrgh I'm sorry dj_paige I just found the problem.

    Windows has changed the drive letters on one of my external drives and I tried to move the files to a full drive! Not surprising that RAW files would not move.

    I'm so sorry for wasting your time and can only apologize for not noticing the problem yesterday, I can only put it down to my own fatigue at the end of a long day.

    I now eat a large slice of humble pie and feeling rather stupid.

  • Last night, my laptop that runs windows xp blue screened and says something about the queue

    original title: help solve a mistake, please on windows xp

    Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:

    SC stop cisvc

    SC start cisvc

    Can someone tell me please how to do this?  I think I know, but I'm really not sure so please help... Thank you

    It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.

    However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.

    If you don't see an icon for the printer that you think should be there, you need to fix this.  On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.

    If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post.  However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.

    Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless.  If you want to change your encryption, you would start by changing the configuration of your router from Verizon.  You should be able to find detailed instructions on the Verizon support site.  I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm

  • Please help! After a windows update last night, I put my laptop on and it won't let me type anything in browsers or anything else.instead a question mark appears when you type!

    need help please, after a windows update last night, I put my laptop this morning and it won't let me type anything to, type all.cant in my browser, research or of anything.when I try to type a? will appear instead and if I press any key again and a new tab opens again and again, if you continue to press any keys.i tried the system restore and it does not work.when I tried troubleshooting my devices on my laptop there is an error code 43. I uninstalled the usb controller option he gave and restarted the computer. I can see is no longer this error.i hope he relocated the itself.anti virus is very good if can anyone help?

    laptop = hp pavillion (BEATS AUDIO)
    OP = WINDOWS 7

    Hi Dan MJ.

    Yes, you can go ahead and try the steps in my previous post and check if this solves the problem.

    If these steps is not enough you can follow these methods and check if it works:

    Method 1: I you recommend to turn off the computer, unplug the power, restart the computer and reconnect the USB device. See if the device is detected.

    Method 2: You can run the hardware and devices Troubleshooter and see if this fits the Bill.

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    You can also see the following article for more information about the error Code 43:

    Code 43: Windows has stopped this device because it has reported problems

    http://TechNet.Microsoft.com/en-us/library/cc725873%28WS.10%29.aspx

    Let us know if that helps.

  • I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

    I have several websites in Muse. Everything was fine until last night. When publishing to Business Catalyst I get a message, teling me the following: unknown authentication problem - shared unknown error: 80. What should do?

    Hello

    To resolve this problem, you will need to disconnect muse and connect again.

    Here are the steps to the disconnection of Muse:

    1. help > log out.

    2. Once signed on restart Muse (please sign using Adobe ID if she invites to connect)

    You should be all set.

    Concerning

    Vivek

  • Please help me, last night I partition my macbook pro, el capitan, and when I try to open my windows via bootcamp I can't access most, blue screen out and my laptop closed.

    Please help me, last night I partition my macbook pro, el capitan, and when I try to open my windows via bootcamp I can't access most, blue screen out and my laptop closed.

    How do you partition the disk?

    This is what app or OS that do you?

  • I turned my HP laptop off last night and my screen and everything was fine. When I opened this morning my screen was all blurry

    I turned my HP laptop off last night and my screen and everything was fine. When I opened this morning my screen was all blurred and distorted. It drives me crazy: () I tried to calibrate it using the tools of systems, but all appears correctly be set. Can someone help me? It drives me crazy. This laptop is nearly 2 years old

    Hello

    You should ask in the answers – Windows Forums for your version of Windows.

    Answers - Windows Forums
    http://answers.Microsoft.com/en-us/Windows

    =================================================================

    Check with HP Support, their drivers and documentation online and ask the HP
    Forums for known issues.

    Support HP & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    ---------------

    It's my generic how updates of appropriate driver: (update video drivers.)

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
    It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
    http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

    I hope this helps.

  • Cannot open lightroom 6 on PC and laptop since last night. I have a stand-alone perpetual license.

    I've been using Lightroom for several years and finally I bought a perpetual license of standalone lightroom 5 with update free for LR6 on PC and mobile.

    Last night I was working in lightroom on PC when I realized that I had imported my new photos to the catalog 2015 instead of a new catalog of 2016 which I had used for a week. I chose open another catalogue (2016) in order to import new pictures in the catalog, bypassed the message about stopping the catalog I was using and the message back up before you finish then anything, lightroom does not open.

    I performed tests on the PC, but nothing wrong was found. This morning when I turned on by clicking on the lightroom ICON was just a spinning wheel (busy) for about 5 seconds, then nothing. He has refused to open.

    I tried to connect to my Adobe account, it was very slow but I got end.

    Earlier I decided to use the laptop, which is independent of the PC, I do not use cloud services. I have exactly the same problem, a wheel that runs for about 5 seconds, then nothing. It's like I've been locked out.

    Problem has been resolved. Disc scan in SafeMode the updated an irreparable damaged windows file. Restored (reset) initial backup of disks PC and restore all data backup hard drive. Fingers crossed, everything will be fine now.

  • Updated FireFox, restarted and now it will not open the browser, even if the icon does not appear in my taskbar. Was fine until the update last night. Win8.1 running

    When I move the mouse over the icon in the taskbar that appears after that I have I dbl-clicked on the icon on the desktop, you can see a miniature version of the browser open as usual, unfortunately, the browser will not open upward on the desktop. I've deleted and reinstalled several times. It has worked very well until I did the update last night.

    Machine features:
    8.1 to win
    16 GB of RAM
    3 video concerts
    Processor AMD FX-6200 6 3.80 Ghz
    64 bit

    Sometimes, a window is "off the screen" somehow. Often, you can force it to appear on the screen by right clicking on the thumbnail image just above the taskbar and choose expand. Does it work?

    A possible cause for this is that the file that stores the positions and sizes of window is corrupt.

    #1 method: If you can get a zoomed window:

    Open the settings folder (AKA Firefox profile) current Firefox help

    • button "3-bar" menu > "?" button > troubleshooting information
    • (menu bar) Help > troubleshooting information
    • type or paste everything: in the address bar and press Enter

    In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

    Leave this window open, switch back to Firefox and output, either:

    • "3-bar" menu button > button "power".
    • (menu bar) File > Exit

    Pause while Firefox finishing its cleanup, then rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

    Launch Firefox back up again. Windows normally appear again?

    #2 method: If you can not get a Firefox window for all:

    Close Firefox by right clicking the icon in the taskbar > close all windows.

    Using the Run dialog box (windows key + R) or the search for the start bar menu (or perhaps 8.x for Windows search of charms bar bar?) type or paste the following and press ENTER to drill down to the profiles folder:

    %APPDATA%\Mozilla\Firefox\Profiles

    Here you can see a folder - in this case, double-click that - or more than one case - in this case, double-click on in what looks like the most recently updated.

    Scroll down and rename xulstore.json to something like xulstore.old. If you see a file named localstore.rdf, rename this to localstore.old.

    Launch Firefox back up again. Windows normally appear again?

  • I can't do the video signal from the laptop to the TV, last night I could

    Today, I can not video signal on my tv via hdmi. last night I was able. usually when I unplug the HDMI - the computer makes a sound, now no sound.  thinking about what I did.  java updated, could have an update to adobe

    Today, I can not video signal on my tv via hdmi. last night I was able. usually when I unplug the HDMI - the computer makes a sound, now no sound.  thinking about what I did.  java updated, could have an update to adobe

    What happens when you type + P (e.g. Projector Options)? If you are unable to access the projector Options ( Start, accessories, connect to a projector), you may need to update your video driver. It is possible to distance an Adobe Flash update has made the existing one obsolete but barely.

  • Cannot restart after the update of XP last night (08/13/09)

    Power the computer off last night, he said "stop after installing updates", so I just left the office.
    Is here this morning, the computer will not re-start in safe mode or safe mode with command prompt.
    I get the "Sorry for the inconvenience" screen
    A ran a chkdsk and rebuild bootcfg
    When I try to start in safe mode, it seems to load takes with several lines of things like:
    "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS\system32\ntoskrnl.exe ' etc, etc.
    then hangs just at a black screen with the last few lines of that on it.
    I can get start menu with f8, I can run the retore console, but I can't get a safe mode prompt to try a system restore from there.
    HELP, I'm stuck.

    And Yes, I know it's a Questionmark XP a Vista forum, but I can't find the XP forum.

    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

    Microsoft.public.windowsupdate discussions

    Link above is for the focus group you need.

    XP discussion groups:

    http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

    Link above is to the XP newsgroups.

    There is a list of groups of discussion XP to the bottom of the left column.

    You get the help you need there.

    Here is the Vista Forums.

    See you soon

    Mick Murphy - Microsoft partner

  • I tried to reinstall yosemite OX since yesterday after I wipe the drive and it froze.  It is said bark 2 hours and 7 minutes since last night.  What can I do?

    I tried to reinstall yosemite OX since yesterday after I wipe the drive and it froze.  It is said about '2 hours and 7 minutes' since last night.  What can I do?

    Try to turn off the computer with the power switch, and then restart.

  • WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

    WhatsApp works do not last night... When I opened the app, it shows white screen and closed after a certain time.

    Try to do these steps, it should help:

    1 check WhatsApp update: Open App Store from your iPhone, click on updates, check if the application needs to update.

    2. restart your iPhone: hold down the sleep/wake button to it turn off and then turn it on again.

    3. close the app: multitasking opened by double pressing the Home button, slide the nonresponse apps up to close.

    4. go in the settings, press Whatsapp, touch turn off everything except mobile and notofications data.

    5. return to the home screen and open whatsapp.

    6. go in the settings, press Whatsapp and turn back.

    7. open whatsapp again. It should work now.

  • I went to upgrade to El Capitan, it was last night. I have a blank white screen. I tried to turn off my computer, but when I turn it back on all that I get is a status bar that shows its about 3/4 downloaded and then it goes back to a blank white thyristo

    I tried to download El Capitan. Has started last night. all I have is a blank white screen. I stop my computor waited awhile and he turned his back. I work around a status bar indicating that it is about 3/4 full, then it goes back to a blank white screen?

    I had this problem too on my iMac (21.5 inch, late 2009) and I tried to restore to the previous version and then do the update again, but I got the same results.  I also tried to reinstall OS X option of the application of the utilities on the recovery disk that took a few hours but got the same results.  Finally, I tried to restart and make a secure boot (hold down the SHIFT key when the bell rang and rejection when the Apple shows up) and I was able to get the computer to boot.  When I logged in a window pops up saying "Complete Installation" and still had 6 min.  When he finally finished, I was an able to connect as usual and everything works fine now.   My mid 2009 Macbook Pro has no problems with the update but my iMac has been a pain.  I hope this helps you and anyone else who may have this problem.

    iMac (21.5 inch, late 2009)

Maybe you are looking for