Unknown number displayed when you receive calls

Similar Questions

• How can I get a light flashes when you receive calls if you can call silence please

  How can I get a light flashes when you receive calls if you can call silence please

  Hello Linda08,

  Go to setting/general/accessibility, walk down for hearing and toggle "Flash LED for alerts"

• Xperiaa Z3 Compact restarts when you receive calls.

  My 2 month od Z3 Compact it recharges when it receives calls from inncoming. This happens especially if all other apps are open or in use, not when the phone is just "inactive". Tried to WCDMA, GSM, WCDMA (peferred) GSM and WCDMA/GSM - no change of LTE (preferred).

  Traveled 'repair phone' support ' new install (?) - no change.

  Tried to restore the factory - no change.

  Every time that happens the incoming call is not registered as "missed calls" in the call log.

  Tempted to throw!

  The phone worked without any problem, because I'm back. Another thing I noticed: the phone works quite a bit 'cooler '. Before that I sent in, could hardly touch the back after 10-15 minutes of active use on the net or "candy overwhelming." I don't know Excactly what caused what to break. It was overheated, which makes the failure of the motherboard or motherboard causing the heat?

• Phone numbers smart blackBerry showing when you receive calls even if the names registered

  I recently downloaded from blackberry app world, and since that time the calls come through with only the number even if the contact is stored on my list.

  I deleted the blackberry app world to try to overcome this, but nothing helped.

  Nobody knows the solution for this because it is very annoying

  I solved this problem. This isn't actuallt something to do with the world of the BB app, it's the lock I activated. After spending some time looking for the forums, I found the solution here.

  Thanks to those who responded.

  I did: Options > security options > General settings > include contacts = NO

• Calendar has a number surrounded by a circle of red by its icon as when you receive mail. What it means?

  Calendar has a number circled red by its icon as when you receive e-mail notices. What it means?

  Someone has sent you an invitation of calendar or event.

  For more information:

  https://support.Apple.com/kb/PH22692?locale=en_US&viewlocale=en_US

• Unknown error number 1 when you install adobe muse 2015

  Unknown error number 1 when you install adobe muse 2015

  What do I do? Help, please!

  Error code 1: "unable to install". Creative Cloud Desktop: https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

  https://forums.Adobe.com/message/7533806

• When you receive a text, I always get an alert tone. However, I don't get an alert of a particular iPhone user tone. This user received a warning sound when I have them send a text. Is this a phone w / my problem or the user? Is there a solution?

  When you receive a text, I always get an alert tone. However, I don't get an alert of a particular iPhone user tone. This user received a warning sound when I have them send a text. Is this a phone w / my problem or the user? Is there a solution?

  Hi royster677,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your iPhone. If you are having problems with the tone of the text for a specific user, you can check the parameters of Contact of the user (under the Edit button) as shown in the following page of the User Guide:

  Contacts at a glance - iPhone

  If everything looks correct, and you still have questions, you can also check your settings stuck and do not disturb:

  Block calls and messages to block or filter on your iPhone, iPad or iPod touch - Apple Support

  Use of do not disturb on your iPhone, iPad or iPod touch - Apple Support

  Concerning

• Apple Watch no sound when decisions/receiving calls

  Can someone tell me please? It seems there will be no sound when decisions/receive call on my Apple Watch. I only got in October. Thank you

  Hello

  To adjust the speaker volume during phone calls on Apple Watch, turn the digital Crown while the call or press the symbols of volume on the screen.

  If it works as planned, it can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

• Under TOOLS/Account Settings / your name / what I chose for "your name" is not displayed when you send an email. What should do? Thanks, paul

  Question: Under TOOLS/Account Settings / your name / what I chose for "your name" is not displayed when you send an email. What should do? Thank you! Paul

  This looks like a problem with your email service, not with Firefox (or Thunderbird).

  It is possible that you need to set the name sent by logging into your webmail account online (e.g., Yahoo! Mail or Gmail). Web e-mail providers like these often put sending appoint themselves, ignoring the settings of your email client.

  Unfortunately, since it is not a matter of Firefox you're unlikely to get help on these forums. I suggest that you find the support site for your e-mail provider, as they should be much more useful.

• ADDRESS BOOK NOT BE DISPLAYED WHEN YOU TRY TO SEND E-MAIL,

  address book is not displayed when you send an email. Normally, when I send an email, I click on the front, and the address book appears on the left side of my screen.
  also, when I bring my address book, it takes half of the screen, when I click on the arrows to shrink the screen, it takes away the names and the addresses.help please!

  When you open a window of writing and click VIEW in the menu bar is framed verified contact?

• How can I get the 'secure site' (padlock) icon to display when you access a web page secured with Firefox 4?

  The "secure" (lock) icon no longer appears on the status bar (or anywhere else I can find) when you go to a secure web page. How can I get the 'secure site' (padlock) icon to display when you access a web page secured with Firefox 4?

  You can add a 'lock' the b-I-S with this extension.
  
  https://addons.Mozilla.org/en-us/Firefox/addon/padlock-icon/

• My Iwatch vibrate when you receive a text. Should she make a sound?

  My shows I vibrate when you receive a text. Should she make a sound?

  Hi Larry

  Sound alerts and haptic depend on your settings. To check their:

  On your iPhone, app in the watch, go to: My Watch (tab) > Messages.

  -For example, you might set this parameter to custom, and then, under alerts, select each of the alerts to show, sound and Haptic.

  Also on your iPhone app in the watch, go to: Watch My > sounds & Haptics - check that:

  -The alert Volume selector is where you want it to be;

  -Silent Mode is not enabled;

  -The switch force haptic is in the central position or the right hand.

  -Eminent Haptic is enabled (to get before announcements of current alerts).

• What do you do when you receive a consistent message on a disk space?

  What do you do when you receive a consistent message on a disk space?

  Moved from the community involvement Center

  Original title: * E-mail address is removed from the privacy *

  Hello

  You tell us your operating system or what drive/partition gives you this error message.

  You can click Start > computer > know what partition is has insufficient disk space.

  C: System drive, follow these steps:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  By default system restore also includes 15% of the capacity of your hard drive.

  You can change the size of it:

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  ______________________________________

  If it's your recovery Partition, read this information:

  Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

  1. If you want to reinstall Windows from in the case of a failure of the system, based on individuals or the keys at startup.

  F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

  You will need to ask your manufacturer for proper sequence.

  2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

  Also ask them how to make records.

  Your D: Recovery Drive is should not be used for backups, defragmented, etc..

  There are backups on an external hard drive.

  To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

  See you soon

• Acer toggle display does not display when you use the Fn + F5 key secret on my Acer Aspire 5560

  What it does:

  When you use the Fn + F5 key combination on my Acer Aspire 5560, it brings up a screen changes on the laptop screen for the selection of an external monitor, I am currently using Windows 7 Ulitmate

  Before the problem:

  Display mode switch Acer existed prior to the upgrades of the drivers

  The problem:

  The toggle screen Acer does not display when you use the Fn + F5 key secret on my Acer Aspire 5560?

  Additon Information needed to solve the problem or any other information:

  I would like to know what driver or software operates the Acer toggle display Mode?

  Also where can I find this driver for computer: Acer Aspire 5560 to bring this Acer toggle display Mode function?

  Acer Toggle display Mode: this is a picture of it when you use the Fn + F5 combination:

  

  Thank you very much Ironfly Ace, it has worked Acer hero of the day

• I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  If you are running Windows XP... There is a slight chance
  that by running the following command would be the fix:

  Reach... Start / run... and type or copy / paste the following text:

  regsvr32 %windir%\system32\qdv.dll

  Then... Press on... Come in...

  You should see a dialog box stating:

  DllRegisterServer in C:\WINDOWS\system32\qdv.dll successful

  Good luck...

  There is debate on this subject in the following forum:

  Windows Movie Makers Forums
  An unknown error has occurred