Unknown PCI device in other devices heading Device Manager.

Similar Questions

• Satellite Pro L650-1PK: 2 unknown PCI devices

  I would really appreciate the help on this one.

  I try to get Win XP running on my laptop Toshiba L650-1PK.

  I have two unknown PCI devices and I'm not sure which driver they refer to. Research on pcidatabase.com seems to offer litte help as well. That's why I wonder if there might be someone who would be able to point me in the right direction.

  The device ID are as follows.

  PCI device
  PCI\VEN_1002 & DEV_AA68 & SUBSYS_FD121179 & REV_00\4 & 2A 7 D5098 & 0 & 0108

  PCI device
  PCI\VEN_8086 & DEV_3B56 & SUBSYS_FF1E1179 & REV_05\3 & 115 83659 & 0 & D8

  I have an idea that they could relate to my audio driver but remains uncertain.
  If yes which manufacturer, ATI or Conexant.

  However when I try and run the update driver audio drivers available to these devices, that he told me that a driver is found on both.

  With our thanks

  Dave

  I agree with Akuma. You must install SP3 and all the other patches.
  It of needed to get the support for HD audio.

  As mentioned; the VEN ID 1002 means ATI
  It seems to be a missing graphics driver.

  B 3, 56 FRI ID means Intel. The laptop was equipped with Chipset Mobile Intel HM55 Express so possibly that the chipset driver is necessary. On the other hand it could be also linked to audio HD if you didn't install the SP3 in the past.

• M40: unknown pci device (sd reader?)

  Hello

  I have reinstalled windows on my M40-149, and I have an unknown pci device listed in Device Manager. I've read other messages here, but I can't find a solution.
  I can t really think of something obvious, it could be, but I noticed that it doesn't do anything when I insert an SD card.
  I have a controller Cardbus Texas Instruments PCIxx21 / x 515, and a Texas Instruments PCIxx21 Integrated Flashmedia Controller is listed in Device Manager. I put t know if there should be one for SD cards but I see no driver for it on this website. So, any help would be greatly appreciated!

  Thank you.

  Hello

  It is listed as a driver for Texas instruments V 2.0.2.1 Cardbus. The download is possible under http://support.toshiba-tro.de/tools/Satellite/sm40/win-xp/cb-drv-sm40-xp-1021.zip.

  Good bye

• HP ProBook laptop G3 450: unknown PCI device

  Unknown PCI device

  Slot PCI 8 (Bus PCI 3, device 0, function 0)

  PCI\VEN_10EC & DEV_522A & SUBSYS_8101103C & REV_01

  PCI_VEN_10EC & DEV_522A & SUBSYS_8101103C

  PCI_VEN_10EC & DEV_522A & SUBSYS_FF0000

  PCI_VEN_10EC & DEV_522A & SUBSYS_FF00

  All the ideas that a pilot is necessary?

  @Kyle-Crowther

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-ProBook-450-G3-notebook-PC/7834555/swItemId/ob-169267-1

  REO

• Portege R200 - W2K - unknown PCI device

  Hello
  I have a r200 with w2k and after installing all components, I still have an unknown PCI device...

  Everything works fine, I even installed these drovers that do not exist in w2k toshibas with their good will and yet... considered package previous assignments, about card pci and usb, but all those mentioned, there are fine by me...

  any idea?
  TX
  JF

  Hello

  On this path, it is not easy to tell which device needs to be installed. I found an interesting paper on the Toshiba (knowledge base) page. Check it on http://support.toshiba-tro.de/kb0/TSB57014E000QR01.htm

  Maybe it will help you identify the unknown device.

  Good bye

• Always M70 - unknown PCI device

  Hello

  I formatted my M70 a re-installed with the Chinese version of XP. But there is still an unknown PCI device in the Device Manager list? I installed all the drivers in untility CD, but the problem is still there. Another problem is the function of CD play without opening the mechine. How to recover this function? There is no configuration file in the recovery CD.

  Thank you.

  [Edited by: admin on 8 January 06 15:26]

  Hello

  This document descript how to identify an unknown device in Device Manager
  http://support.toshiba-tro.de/KB0/TSB57014E000QR01.htm

• M6-1045dx Lodge: unknown PCI device

  Hi after upgrade to 8.1 windows. I have an unknown PCI DEVICE
  the envent says:

  \VEN_10EC&DEV_5289&SUBSYS_18A4103C&REV_01\4&f7495&0&00e0.
  and I'm having problems with my Internet, when the beginning of the OS everything is ok, but after a while my connection does not work.

  Thank you

  Hello:

  This device is the card reader that needs a driver.

  DL and install the driver first on the list on the link below...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  The BOM indicates your model has the Intel Centrino 2230 wireless card.

  The only suggestion I can offer would be to install the latest driver for this card directly from Intel.

  You want that element of fourth on the list (64-bit only driver).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=24576

• HP laptop - 17-p000na AMD R4: unknown PCI device

  Hello all, first time on this forum...

  I recently bought a HP 17 laptop p000na with AMD R4, it came with Windows 8.1 64-bit installed.

  I do not earn 8.1 and in all cases, some specialized software that I use is better coimpatible with Win7 32 bit, some older software works better on XP 32-bit, some same needs BACK... I therefore immediately has got rid of 8.1, partitioned the drive and installed Win7 64 bit, Win7 32 bit and XP 32-bit SP3.  I got a slow start installing these operating systems, but was eventually successful, it!

  I managaed to encourage drivers to just about everything in the Device Manager in the two Win7 32 bit and Win7 64 bit, a combination of AMD support site, HP, support from Realtek site support site. etc... But I find myself with an unknown PCI device in Device Manager.

  I hope someone can shed some light on what may be the PCI device and where can I download a driver for it.

  I still have to get arouhd to sort the XP drivers - I might wonder about this later!

  Thanks for reading,

  Simon

  Hi, Simon:

  If this is the label of the device, you must first driver on the list from the link below...

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

• Fusion 6 and unknown PCI device

  Hello

  I've upgraded fusion 5 to the new version, I upgrade vmware tools on my XP SP3 virtual machine but after the restart as it left this unknown PCI device, I tried searching Google for information but nothing to do, please help me!

  Thank you

  If the Virtual Machine's hard drive one or CD/DVD were defined to SATA, then the unknown PCI device is because Windows XP does not support VMware Virtual SATA ATA Device drive.  Only some operating systems that contain drivers for SATA AHCI / will be able to access the VMware Virtual SATA disk ATA Device.

• E430 - unknown PCI device - WIndows 8

  After that I have upgraded to windows 8 Pro (64-bit) and installed all the drivers available on the Lenovo Web site.

  I have still 1 unknown PCI device in my device manager.

  Anyone know what device it could be? And the pilot?

  Additional information:

  Status: The drivers for this device are not installed. (Code 28)

  Location: Bus 2 PCI, device 0, function 0

  ID: Device PCI\VEN_10EC & DEV_5229 & SUBSYS_500017AA & REV_01\4 & c587ecb & 0 & 00E0

  Thanks in advance.

  Nice day...

  This string of material, it looks like the Realtek Cardreader:

  http://www.driveridentifier.com/scan/driver_file_detail.php?inf_file_id=1018629&MD5=17434a91fc66dc3b...

  the link of the Win8 driver in your driver matrix: http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT073272 currently shows like s. o. the driver Win7 * may * work: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028711 but I cannot confirm that.

  Kind regards.

• CanoScan 5600F Scanner appears as unknown in Device Manager

  I have a new CanoScan 5600F scanner which appears as unknown in Device Manager. I downloaded and installed the latest driver (several times) from Canon.

  • I tried the scanner on two PC running XP Home - a new Compaq Presario and a new Barebone VisonMan. It does not work on either.
  • I also tried the Epson scanners on both machines, and they don't work either.
  • However, when I run the Compaq Presario with Vista (which came with it), works to scan Canon. Problem is, I don't use Vista (or Win7) and I have no intention of.

  This seems to indicate that it is a problem with XP Home, do not recognize the scanner. I did not have this problem with any other USB device. Any suggestions?

  Thank you.

  Hello Onliner999,

  Thank you for your message.  I see that you have installed the correct drivers several times, checking with Canon, it seems that they have a new driver for your product that comes out on 10/26/2009.  Please try to download and install from the link below:
  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=351&ModelId=17142
  Please let us know if it did or did not resolve the issue.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• driver for the unknown PCI device after having reinstalled Windows 8.1

  Hello, I have HP ENVY 15-j15ea and 2 problems with it.

  1. after reinstalling Windows 8.1 64 bit I can't find the driver for unknown PCI (bus 6), i.e. hardware ID:

  device PCI\VEN_10EC & DEV_5229 & SUBSYS_198A103C & REV_01
  PCI\VEN_10EC & DEV_5229 & SUBSYS_198A103C
  PCI\VEN_10EC & DEV_5229 & CC_FF0000
  PCI\VEN_10EC & DEV_5229 & CC_FF00

  I, ve tried this link, but it does not work: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123976-1&cc=us&dlc=en&lc=en...

  2 and what I need to install drivers for my laptop AMD A76M FCH mother/chipset card? I could not find driver for it, then maybe it is pre-installed with Windows 8.1?

  Help, please! Thank you!

  By the way: why it

  You are the very welcome.

  If you did not have a SMBus controller device listed in Device Manager in the category other devices, there is no need to install the chipset drivers amd that they would have been included in the database of the W8.1 driver if there is no listed SMBus Controller device after install W8.1.

• HP mini 110-3131 dx: unknown PCI device

  Hey everybody,

  I have trouble finding the suitable driver for my hp mini 110-3131 dx. I bought it 2nd hand, did a clean install of Windows 7 Ultimate. Everything seems fine, except when I checked on Device Manager and discovered that there is a yellow question mark on a PCI Device in the section "other devices." I did all the possible ways to fix it including 'update driver or uninstall' and things like that, but anything will do. I checked for its properties and discovered that the manufacturer is unknown, making it difficult for me to search for the correct driver. Let me say that there is nothing wrong with my laptop (that is, no sound, cannot connect to the internet) made me inspect the Device Manager, I just wanted to check if all goes well.

  I would appreciate greatly any help that you could give me. It was nights since I started Googling for the right driver and always go home empty-handed.

  Thanks in advance.

  Homunculi

  Hello

  The most likely culprits are:

  Realtek card reader driver.          (If it is not displayed in Device Manager)

  HP Quick Launch software.           (If it is not listed in programs and features)

  If she is not of the above, go into Device Manager, right click on the device problem and select Properties.  Click on the Details tab, choose hardware ID in the drop-down list and post back with the details presented in the title of the value.

  Kind regards

  DP - K

• Equium A110 - 233 (PSAB2E) - unknown PCI device in Device Manager

  I recently reinstalled windows xp on my laptop and since reinstalling found new hardware wizard keeps popping up saying he found the PCI device, but I can not find the drivers for it or will be the discovery of the laptop drivers automatically.

  Any help much apprechiated

  Thank you

  Hey,.

  HAV you already verified that the ID provider and device in the Device Manager? Check this please and this site http://www.pcidatabase.com/, you can enter these s ID, and then you can see what device it is.

  In addition the drivers can be downloaded directly from Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If you have any other questions, please let us know! :)

• HP Elitebook Folio 9480 m: HP Elitebook Folio 9480 m missing drivers / peripheral device PCI Device Manager and unknown?

  Hi all

  I've already installed Windows 8.1 Pro x 64 and on Device Manager, I always 2 missing drivers, they are PCI Device and unknown device?

  Please see attached a printscreeen. Any idea of what are the missing drivers?

  Thanks to you all

  Hello:

  You need this driver for the PCI device...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7089928&swItemId=ob_134503_1&swEnvOid=4158

  I gave you the driver for the unknown device when you W7 on the machine, so it's probably the same as.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7089928&swItemId=ob_132986_1&swEnvOid=4158

  If it's not this one (or you had two unknown devices at the same time and already install the driver 3D driveguard), then it's probably that one...

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7089928&swItemId=ob_133322_1&swEnvOid=4158