Unlock fingerprints is not a job to first unlock after switching on voltage/restarting
I noticed that since the upgrade Marshmallow fingerprints on my Z5C sensor does not work for the first release after that the phone is on or restarted. It works very well for unlock later, but instead of the unlock screen, I get the keypad to enter my pin code, which appears the first time that I am trying to unlock the phone, I press power once to turn on the screen, then tap again to unlock.
This is normal, the first time after a reboot, or your xperia House goes down or is restarted, you will need to insert the PIN. No need to open a thread for this.
Tags: Sony Phones
Similar Questions
-
I've updated all but still, it won't work
Hi Daniel,.
I suggest you to install the validity fingerprint sensor driver to get the finger print sensor option in Control Panel. Here is the link for our reference.
Then, you need to install the Manager software security tools to protect for the finger print job. Go through the link:
Then you must install the player 3D HP 5 guard to protect the drive against damage in case the laptop is hit hard or fall from a low height, by parking the heads.
You can also refer to the thread for your reference.
If you have other questions related to the issue, then I suggest you to contact HP support. They would help you better.
Back to us for any other questions related to Windows.
-
Fingerprint reader not working not
HI, I just recently to upgread my laptop operating system from windows 7 to Windows 8.
Everything works well except for my fingerprint reader, his work not at all.
I had downloaded and installed all the drivers from the Web site below, but it still does not.
Can you help me solve this problem?
Product name: HP Pavilion dv7 Notebook PC
Product number: A3V80PA #UUF
Current OS: Windows 8 Pro 64-bit
Press the Windows key + X and select Device Manager. Under biometrics, fingerprint reader not appear without one? or one! icon next to him?
You mentioned that you have installed the driver. Did you also install the program SimplePass found on the link below? I saw a version of Windows 8 for the unit, but the version of Windows 7 can work. If the version of Windows 7 does not work, try right-clicking on the SimplePass program and select troubleshoot compatibility mode to see if it gets it to work.
http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103162-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5207968 & sw_lang = -
Fingerprint reader not working not not upon awakening from sleep for the windows login
Hello
I have a new T540P with a validity fingerprint reader.About 80% of the time, the fingerprint reader does not meet the windows login screen after the wake up the computer from sleep mode. It works 100% of the time when starting from a stop position, however. Once connected, it also works 100% of the time. The question arises when you log in to windows.
I tried many things
-uninstallation/installation of the device in the Device Manager and finger print manager pro software
-prints of setting through two fingerprint Manager software pro (lenovo) OR through the windows built in options of the control panel of the fingerprints
-disabling "allow windows to turn off this device to save power" in Device Manager.
Thus, I must say that I have an another T540P I ordered as a replacement. Both models encounter the same problem.
Is it a matter of broad platform affecting all models of T540P? It's frusterating.
-
Dialpad in 4.4.4 will not work on the first attempt
Hey everybody,
I just updated my motorcycle with android 4.4.4 g and my unit is ok but there is a small issue. Whenever I touch the dial pad icon to dial a number, the numbering screen not coming in a first attempt. Also, I used safe mode to see if the problem is resolved, but it's the same in safe mode too. Is there any kind of bug or other problem that causes this problem? I have not any other pitcher and not had this problem before the update... Please suggest me if anyone has a solution... and also say if you are facing this problem too. I also made a video and uploaded it please look and tell me what needs to be done.
Thank you
https://forums.Motorola.com/posts/8bc108da92
This issue has already been discussed in the link above. If you have disabled animations in the developer settings you get this "bug". There was not present in section 4.4.2, but for some reason it is in 4.4.4.
-
Fingerprint reader not detected
I have a HP Pavillion DV6007ea and all of a sudden the fingerprint reader has stopped working and I get a message that says "the fingerprint reader not detected".
Have tried to reinstall drivers etc but still the same message. Someone at - it experience with this? Is the bad drive or what? I have an extended warranty but do not send it if it's something simple.
Same thing here. Someone at - it a solution?
-
Dell audio drivers will not load when the system is turned on for the first time after adoption of Windows 10. I have to reboot every time. So what I'm doing puts the system into sleep. in this way, I don't need to stop and restart the system. It is Dell Inspiron N5559. Audio drivers are installed and up-to-date. Equipment works correctly.
Hi akilesh.sharma18,
Please repost this in the Audio forum from the laptop to help.
-
HP C4680 will not remove jobs at the end then freezes in queue on MAC with the Mavericks
HP C4680 will not remove jobs at the end then freezes in queue on MAC with the Mavericks
try to download the latest driver Package HP from Apple here:
http://support.Apple.com/kb/DL907
Install the package.
Reset the printing system. And add the printer with the new driver.
Try to perform a "reset printing system" on the Macintosh and then reconnect to the printer.
To reset the printing system do the following:
1. open System Preferences
2. click on Printers & Scanners
3. right click or control click in the list box for the current print queues.
4. Select the Reset printing system...
5. enter admin user name and password
6. restart the Macintosh
7 try to set up the printer again -
Dell 1230c do not - print jobs go to the queue printing but will not come to buffer
Dell 1230c do not - print jobs go to the queue printing but will not come to buffer
Hey Joe,
Try duration to remove print jobs to remove Job feel stuck in the queue, and then restart your computer.
Also refer to:
Cancel printing
Maybe you have that impression break.
View, pause, or cancel printing
You can also see the troubleshooting steps in Dell for Dell printers.
Please post back with the State of the question.
-
Fingerprint Reader not working - how to set the pass simple hpenvy?
Hello. I want to ask you how to set the pass simple hpenvy. Because my fingerprint was not detected. What should I do and how do to reset that? Thank you. God bless you
Hello
See the article:
A (Windows 8) fingerprint reader troubleshootinghttp://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&LC=en&docName=c03718240
Note: Article also contains measures to make changes in the BIOS. I suggest that you
Contact HP support before making any change in the BIOS.
See also: using HP SimplePass Fingerprint Reader (Windows 8)
http://h10025.www1.HP.com/ewfrf/wc/document?CC=UK&LC=en&docName=c03653209Hope this information helps.
-
Hello team,
First and After Effects crashed.
I tried to uninstall the utility (Mac OS). Uninstalled is not for them (which has worked for other applications).
I used the cleaning tool. It seems to work, but the uninstaller for first and AE in the utility remained.
I deleted everything I found CC remaining manually.
I tried to install CC again and it fails. 201 error code, I followed the steps and it does not work.
I don't know what to do anymore.
Could someone help me?
Virginia
I got the help of Adobe support, they sent me another link to download Adobe App Mgr It was apparently a network problem but, and it was resolved after a few re-tent.
-
Extensions Manager does not come with Adobe first CC trial?
Hello
The extensions Manager does not appear with Adobe first CC of the trial?
I like to add the plural eyes 3, can someone help me?
Thank you
Georgia
Please try: https://helpx.adobe.com/x-productkb/global/issueswithinstallingaddonsCC2015.html
-
Adobe Edge (with video) + Sizmek does not load on the first attempt in Firefox
We tried to get a series of Adobe Edge HTML5 with video to work with Sizmek and Firefox and have had no luck. We did a series of works autour and nothing seems to work.
But if we do a sequence of basic Adobe Edge it works fine, but as soon as that video is attached it crashes and does not do anything (on initial load).
We found this banner of Adobe Edge with video works with all browsers except Firefox unique.
So far, we tried the following solution.
What has not worked
- Move the code of compositionReady edge of Sizmek at the head of the document.
- Mix video load order in the file edge.js
- Reduces the size of the video thinking it could be a weight of file problem.
What worked
- Deleted the video in the Edge file and have basic animation and it works very well.
- Removed the Sizmek EB codes and it is loaded with videos, but is of no use to us because it does not respect the framework of ad Sizmek platform.
- Re-build the banner using only the model Sizmek with greensock and works perfectly.
Have contacted us the support of Sizmek and crossed a few developers and they said that the issue is in the ship's library and the compositionReady event is not dispatched to the first loading of Firefox.
They have also done a few tests and think it might be a big problem with Adobe Edge and asked that contact us Adobe to find a solution.
Can someone please point us in the right direction or other solutions of workaround to get the edge work "reliable . ” with Sizmek and Firefox?
We know that we can build with just all the code, but our digital designers are not coders and need a solution to animation of timeline as opposed to a text editor. (With "Edge animate the logical progression of Adobe Flash for them")
Thanks in advance!
My current configuration of the system: MacPro (end 2013)
Operating system: OSX Yosemite 10.10.4
Animated adobe Edge Version: Adobe Edge CC 2015
Version of Firefox: 38.0.1
Here is a preview link:
Link of the Adobe Edge sample file:
Dropbox - 970 x 250-video - standard.zip
.. .on investigated further. including an ogv version seem to fix this problem for some reason any (FF should play mp4s without problem).
The VGO must be first in the order of the source. I think that this must be done manually in code.
-
get the error "no sequence valid is not found for the set of patches" msg trying to launch Acrobat XI for the first time after installing - suggestions? Using Windows XP.
Hi James,
- Please uninstall Acrobat Pro XI using the cleaning tool Download Adobe Reader and Acrobat tool - Adobe Labs.
- Restart your computer.
- Install Acrobat Pro XI using this link download Acrobat products | Standard, Pro | DC, XI, X & serialize.
Let me know if the problem persists.
Kind regards
Nicos
-
I have nikon d7200 and I the beidge does not open in the first. I'm trying to update and its said U43M1D error code
update by downloading the files directly and then apply them:
pre cc updates: http://www.adobe.com/downloads/updates/
CC updates: http://prodesigntools.com/adobe-cc-updates-direct-links-windows.html
updates CC 2104: http://prodesigntools.com/adobe-cc-2014-updates-links-windows.html
Maybe you are looking for
-
How can I turn off display on MacBook Pro when it is connected to the external display?
I recently bought an external screen made by HP and I have a problem. When I connected it to my MacBook Pro, I would like to turn off the display on the MacBook Pro completely, because it is a loss of power. I tried to turn the brightness all in low,
-
How to get Vista 32 bit back?
After getting a Trojan horse I had to use recovery media. Only the supplied stand is a Toshiba Vista Home Premium 64-bit recovery media. After having used these disks and restore a healthy system, a number of programs that will not charge. I can only
-
cannot select the color of the mark on the intensity
Hi people, I want to add color to my plot intensity, but when I right click on the bar of color card, the mark color is gray. A picture is attached. I use LV2011. Someone knows how to fix this? Thank you. -Sonny
-
What is the problem with .NET Framework v.4.0.30319 tax Turbo which obviously must be able to install?
-
How do you enlarge fonts when you copy with HP Officejet 6700
I have an HP Officejet printer 6700 Premium. How do enlarge you the fonts when copying. Thank you