Unlocked new Xperia Z3 - it snaps to the 1st sim/network?

Similar Questions

• 'New' Refurb Mac Mini froze within the 1st week - should I return?

  We had our refurbished Mac Mini (8 GB, 1 TB) for less than a week, on the fifth day, he froze in the morning when my son tried to open a session (session was still active since the day before, but the Mac Mini was asleep).  The predefined cover for a long period of time, and although the mouse is moved, it did not react when you have clicked on anything whatsoever.  I had to finally press the power switch on the back, turn off the power.  There is not a lot of software installed on it yet, chrome, software the Microsoft Bluetooth mouse, keyboard of Logitech software and a few games of my son got out of the Apple App store (but did not play at the time).  I ran the diagnostic equipment, but it has not reported anything.

  I'm new to Mac, so I'm wondering which, if it is a red flag, because it is a refurbished device and that I should just go back to the store and get a non renovated unit?

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information.

• BlackBerry 8250 new smartphones does not start with the connected SIM card

  I'm having a problem with my new Blackberry of Virgin Media (mobile).  I just got it and when I have a connected SIM card I only get the loading screen timer and the blackberry does not start.  If I have no connected SIM card the device starts in the operating system, but was told that there is just no SIM connected (obviously).  Once I put the SIM card in again once it is stuck on the loading screen.  As you probably already figured out that I did many resets hard with the battery pull and it has not solved the problem.  A consultant because it would be greatly appreciated because the only advise I got support was remove the boot of sim and put it back and start again duh!

  Carrier - Virgin Media / Vodafone
  Model - 8520
  Version of the OS - 4.6.1
  Free space - 130679088 bytes

  BT device - I have the details as HDW - 22736-002 Rev 1 Ver 2 4509 (is that correct?)

  Apps & free space - nothing installed new device installation is not complete.
  Blackberry 4.6.1 Basic application
  Basque 4.6.1
  Galician 4.6.1
  softwqare system BlackBerry 4.6.1
  1.0.1.20 Application Center
  Attachment Service 4.6.1
  4.6.1 cards
  Messenger 4.6.0
  BrickBreaker 4.6.1
  browser 4.6.1
  documents to go 1.003.018
  configuration of e-mail application 4.6.1
  help 4.6.1
  Klondike 1.4.8
  4.6.1 Memopad
  password keeper 4.6.1
  Phone 4.6.1
  Sudoku 1.0.11
  4.6.1 tasks
  King of hold'em Texas 2.3.0
  Word Mole 4.6.1

  1 is the news provider's SIM card?

  Old to another device?

  2. do not place you a memory card in the camera?

  New media card?

  or from another device? What device?

• You just bought quick charger for my new z5 premium store Sony Xperia but they gave me the EP881

  Can I return the EP881 charger I bought from the sony store I thought it was the quick charger UCH10. Since my new xperia z5 premium comes with the new charger of UCH20 already, and all previous phones xperia z came with EP880 so why gave me the commercial version of my normal charger and put it in a box with "Quick charger" on this issue when it is actually just its commercial version?

  I guess that is why the box for the commercial version EP881 of no datails of his power of entry/exit for consumers won't be able to tell that it is the same charger normal out of the box with the name "Fast charger", really nice. Anyway, thank you guys. Just a lesson for me not to buy all the accessories in a sony store. You are awesome to mislead, I mean selling tips very useful for us. And thank you very much for your very helpful answer.

• Visit the Sony Blog for a first look at the new Xperia Tablet S

  IFA 2012 is here and Sony SGNL is giving viewers an exclusive first look at the new Xperia Tablet S
  Visit the blog for more information!
  [url = http://blog.sony.com/xperiatablet:1ewwrje0] The Sony Blog [/ url: 1ewwrje0]

  [youtube:1ewwrje0] fI2azyXeync [/ youtube:1ewwrje0]

  If you want to be the first on your block to have one,
  Pre-orders begin today at
  [url = http://store.sony.com/webapp/wcs/stores/servlet/CategoryDisplay?catalogId=10551&storeId=10151&langId=-1&identifier=S_tablet_landing&SR=tab:store:brand_bin:tablets:ss:1cw8mlrw] The Sony Store. [/ url: 1cw8mlrw]

• My new Xperia XA of the ultra network turn catch the problem!

  Initially I bought Xperia double M5, but it's a completely defective unit! And finally, who had died! Then after 3 months harassing Sony Center replaced me a XA ultra new Xperia.
  I use it for 13 days until now, I am facing problem with the signal from the network! He can't catch the Tower network correctly! Where other mobile do with the same network operator at the same position with complete tour! Signal bar is always as a point! Never complete! Smoking 2 or 3 bars at least! What the * beep * Sony! I am from Kolkata and I use AirTel sim. Already taken a new nano Sim, so no card sim or network problem!
  Now help me guys... Please. What I can do...
  Thanks in advance

  Do not lean on the bar, do this with two phones

  Settings > about phone > status > signal strength > what do you see?

• Put the current sim in unlocked iPhone

  Hello

  I currently have an iPhone 5 c locked to the O2 on a 24 month contract. I recently bought an iPhone 6 directly from Apple, that is to say unlocked and have ordered a contract monthly only sim which will arrive later this week. My question is, I am able to put my current O2 into the new phone sim until arrives the new sim card, or it will mess up the new phone somehow (that is to say block him on O2 or something like that)?

  Thanks for your help!

  You can safe the old SIM in the new phone. The lock status is based on the IMEI of the phone, not the SIM card.

• Restore old backup android on my new Xperia z5 premium

  Hello Sir/mam

  I got a samsung camera before and he had a copy of backup on my pc

  I lost this device and always keep this backup

  is it possible to restore or move the old backup copy of samsung to my new xperia (Z5 double Premium (E6833))

  Android version: 6.0.1

  Build number: 32.2.A.0.253

  Depending on how you have generated the backup, you can be out of the chance of the differences between the two marks, if it is a compressed file, you may be able to decompress it and then manually copy data from your computer to the new.

  Is saving a file or is it a directory?

• How to get out Mcu put snap in the sx20 codec

  As I've attached image, I raised lite snap shot box, I can not MCU snaps into the sx20 codec.

  We use MCU (5300 series), Gatekeeper & sx20 codec as endpoint device.

  I see that the call is using encryption, instant end do not appear if the call is encrypted.

  I do not know what version of the software that you use, but there is a change in behavior for snapshots between TC7.2 and 7.3, see each of the admin guide below for details.  Note that end snapshots are deleted, as well as a new 'notification of surveillance '.

  SX20 Admin Guide TC7.2, pg 19.

  SX20 Admin Guide TC7.3, pg 13.

  There is a very long back and just discuss the TC7.3 release regarding snapshots (link below), but the behavior will change slightly in TC7.3.3.  However, I don't know if end snapshots will come back or not.

  tc730-websnapshots-broken-even-further-design

• Playhead snaps to the Point in the Source monitor

  I work with the new version of first CC and when I play or scrub the clips in the Source monitor he always snaps to the Point. It is hard rub the clip to see if I need to extend the entry point when he keeps back alignment. It seems unnecessary to always erase the In/Out points each time. I've never had this problem before...

  Thanks in advance for any advice.

  Hi buckyi,

  Seems like you "Loop" enabled in the settings of the Source monitor.

  

  Turn it off and see if that helps.

  Best,

  Regalo

• Line snaps to the wrong place

  I move a point anchor or line to the location that I want, let go and it snaps to a completely different location. Seems to be snapping to a grid unit, however, 'show - Snap on the grid' is off as is the "" show - Snap to Point"

  This has been plaguing me for awhile. Can't seem to find any documentation about it. Alignment feature is turned off. I use Illustrator CS5. I am a user of illustrator for a long time (since Illustrator 88). There seems to be a bug.

  Pointers or ideas would be appreciated.

  See you soon

  Andrew

  This isn't your fault, everyone faces this new setting of CS5.

  Transform the drop down palette menu > snap to the grid of pixels > Off

• I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  I have a MBP of 2009 end. I updated the material to 8 GB of ram with an SSD of 240gig. I want to run the new OSX, but is not on the list approved for the update. Anyone know why?

  It is a decision that was made by Apple.  El Capitan is the newest OSX that will support a 2009 MBP.

  This is not uncommon.  My 2006 MBP came with Tiger, but is limited to OSX Snow Leopard.

  Old hardware ends up by becoming obsolete with newer technology.

  Ciao.

• new time machine snapshots copied to the old directory of the machine not recognized

  I had a time Capsule 2 TB which showered, and I started a new backup (a USB key) by mode Apple drive. It took me a while to return to deal with the old clichés left on my Time Capsule. I found nothing specific online to tell me how to deal with this, so I made a few decisions naïve. I've disabled the Time Machine, renamed my new store backup and copied over the old store backup on the new backup drive time Capsule. Then in a Terminal on the command line, I mvhad snapshot directories in the newly copied backup of the old backup store store renamed folder. NOTE: On this site, I learned about a Time Machine of assistance called bypasscommand, and I needed to use it to move the Flash files in the command line:

  $ sudo mv 2016-09-17-211302 /System/Library/Extensions/TMSafetyNet.kext/Contents/Helpers/bypass.

  .. /.. /Backups.BackupDB/MyMachine /

  At this point, I thought: well, now, I have all my old and new pictures in the active backup store on the local USB drive. Then I turned on the Time Machine, and the first backup failed:

  "An error occurred during the file copying. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk. »

  Then I noticed that Finder shows only most original snapshots while in the Terminal, I see all snapshots using the ls command. All snapshots have the same names in fashion and the owner/group permissions. So, why don't Finder shows all snapshots and why is Time Machine unhappy?

  Given that I can't modify my own * post, here are the corrections and updates of the original:

  I had a time Capsule 2 TB which showered, and I started a new backup (a USB key) by mode Apple drive. It took me a while to return to deal with the old clichés left on my Time Capsule. I found nothing specific online to tell me how to deal with this, so I made a few decisions naïve. I've disabled the Time Machine, renamed my new store backup and copied over the old store backup on the new backup drive time Capsule. Then in a Terminal on the command line, I mvhad snapshot directories in the newly copied backup of the old backup store store renamed folder. NOTE: On this site, I learned about a Time Machine called command help work around, and I needed to use it to move the Flash files in the command line:

  $ sudo mv 2016-09-17-211302 /System/Library/Extensions/TMSafetyNet.kext/Contents/Helpers/bypass.

  .. /.. /Backups.BackupDB/MyMachine/

  At this point, I thought: well, now, I have all my old and new pictures in the active backup store on the local USB drive. Then I turned on the Time Machine, and the first backup failed:

  "An error occurred during the file copying. The problem may be temporary. If the problem persists, use disk utility to repair your backup disk. »

  Then I noticed that Finder shows only most original snapshots while in the Terminal, I see all snapshots using the ls command. All snapshots have the same names in fashion and the owner/group permissions.

  Then, I thought that the Finder was confused somehow. I turned off Time machine and ejected from the USB drive. When I plugged back it it, of course now Finder shows all snapshots. The tmutil listbackups command confirms also all snapshots. I started a new backup, but it has not yet.

• Hi, I read your support page that the News widget is available only in the United States, the United Kingdom and Aus. When will it be available in Norway?

  Hi, I read your support page that the News widget is available only in the United States, the United Kingdom and Aus. When will it be available in Norway?

  Hello

  Just to let you know, it is a user to user community. You do not directly communicate with Apple here, so no one can say if or when Apple may have available in your area News widget, but what you can do is to provide feedback to Apple > http://www.apple.com/feedback/iphone.html

• An iPhone Unlocked verizon 7 will work with the T-Mobile network?

  I expect to buy an iPhone 7. I am currently using T-Mobile, but I'll probably use CDMA-based network when I spend my winter in China. Anyone know if an iPhone Unlocked verizon 7 will support the T-Mobile network? Thank you very much

  If you look at the following:

  http://www.Apple.com/iPhone/LTE/

  iPhone 7 seems to have 2 different CDMA models:

  model A1660 (CDMA) iPhone 7

  model A1661 (CDMA) iPhone 7 more

  and 2 different models of GSM:

  Model A1778 iPhone 7

  Model A1784 iPhone 7 more

  My guess is that the models of Verizon (CDMA) do not work on the T-Mobile GSM network. Data connection does not work at least LTE. Not sure about the voice. T-Mobile and AT & T models may support data LTE in both networks.