Unrecognized works drivers and windows install on and on

Similar Questions

• WiFi Driver HP Dv6-6c63sl does not work after frech windows install

  Hello

  After a frech Windows 7 64 bit install, I installed the Wi - Fi driver I found on the page drivers of my PC HP DV6-6c63sl:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&OS=4063&product=5251196&softw...

  But the 'red light' switch Wi - Fi is always on, I didn't encounter this problem before.

  Could you please help or give me a driver for my WiFi card

  Thank you in advance.

  Hi Huntrz,

  Thank you for visiting the Forums HP's Support and welcome. I have read your thread on your HP Pavilion dv6-6c63sl Notebook and not able to download WiFi.  Here is a link to theHP Support Assistant. The HP Support Assistant will help you in the wireless and other items that were not installed properly with the new installation of Windows 7.

  Hope this helps you.

  Thank you.

• Compatible drivers for Windows 7 for Sleekbook 15-B011NR

  The original hard drive running Windows 8 crashed, and I replaced it with a hard drive running Windows 7 from my old wifes computer that had a screen of shatterd. I find it very difficult to get the correct drivers to run because this drive is looking for everything that is installed on the other computer.

  Sheet 15-B011NR:

  http://support.HP.com/us-en/product/HP-Pavilion-Sleekbook-15-B000/5296234/model/5337008/document/C03...

  The new hard drive came from here:

  http://support.HP.com/us-en/product/HP-Pavilion-Sleekbook-15-B000/5296234/model/5337008/document/C03...

  Some of the main issues are:

  -The HDMI does not work, or ports USB on the right side of the computer works, but the left did.

  -I can't watch videos for work in class, even if it could be the site itself, I know that a lot of people have problems with our universities online capabilities.

  -When I open something like Solitaire I get a message saying ' hardware acceleration is disabled or not supported by your video card driver, which could slow down the performance of the game. " Make sure that you have the latest driver installed video card, and that hardware acceleration is turned on. »

  -When I tried to update USB drivers he cancelled on me with a message saying "before installing the drivers and DisplayLink Core software, please install OEM drivers for graphics hardware of your PC up-to-date."

  The computer works fine, internet works fine and it does the whole job, but I'm afraid just because I'm a student adult with some courses online and I don't want to end up screwing myself in the middle of the semester. I'm really just need help on is the ability to restore full function at all with the right drivers, or if I should suck to the top and buy a recovery of Windows 8. I had a long chat with HP Tech Support and they told me that my only option was to buy either a replacement hard drive, or buy the recovery of Windows 8, and that I would not be able to install a new hard drive and still less a different OS, which I had already done and is what I was using to speak with them , so I'm not too convinced that this cannot be corrected. Any help would be greatly appreciated. Thank you.

  Sorry, it took so long for me to get back to you, my computer has been... Well, she's been through things to say the least.

  Unfortunately, those said drivers did not work, but however, I found a solution.

  HP support didn't help either and actually ended up put me in a worse situation that I started taking my system remote access, and then start a factory reset which left me with zero work drivers and without operation of the NICs can connect to the internet via an ethernet cable.

  Anyway, one of my friends found a way to make a free recovery for Windows 8 USB. All you need is a USB key with at least 6 GB that you are willing to completely remove, or is already empty.

  Google: create an Installation of Windows 8 media

  or follow the instructions on this link:

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  For all those who may run into problems, that's all I know, and I'm sorry, but I'm not an expert:

  I created the recovery drive and installed it, and everything worked perfectly. No access code required because with computers pre-installed with Windows 8, your access code is built into the BIOS. If you use a hard drive with Windows 7 on a laptop Windows 8, first make sure that your BIOS has 'Legacy Mode' active, even after the installation of Windows 8 by following the steps in the link above. That's as far as I know and what I did, and it works perfectly.

  Thanks for your help, it was greatly appreciated and for anyone else having the same problems, I hope that what I gave helps.

• Installed Windows & 32 Bit drivers and USB ports don't DO NOT WORK.

  I bugh a laptop HP Pavillion 14 TS who came to preinstall Windows 8.1 64-bit I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem.  None of my network drivers work and 2 uSB ports where I plug in my mouse and other devices of SB to do more work.

  I did a back up of the established SW leader who has all the HP dvers for my laptop but will not install the network and video of divers. And when I try to install the drives, I get the error message saying that they are not compatible with this version of Windows.

  I loked on the HP site under my model of laptop that s as above, but HP don't do my notebook drivers for Windows 7 32. And I looked on both the Realteck site for network wireless Realteck and Ethernet Realteck drivers but none of them work or install on my OS. Intel video drivers do not work either. So I'm really stuck one I can not return to 8.1 Windows as if that 32-bit Windows 7 works on my laptop but most of my drivers is not compatible with the operating system and I don't want not to install 64-bit Windows, I like 32-bit.

  Drivers that do not work on Windows 7 32-bit are:

  Realteck RTL8188EE 802 - 11 b/gn witeless lan

  Die Ethernet Realteck and

  Intel High definition graphics driver

  That don't work at all under Windows 7 32 bit because they are the only 64-bit drivers.

  So can you please post me a link network bth and drvers of graphics from Intel that works with my laptop. I tried many different drivers Realteck and raphics for Windows 7, but none of them DOES not work on my system. And none of my USB ports are no longer works. So, how can I fix this?

  Hello:

  Should be no problem to get W7 32 bit to work on this model.

  Just use all the drivers and software from the HP Probook 450 G0 on your model, except the Audio, BIOS and firmware files.

  Your model uses only the Intel HD graphics driver.

  The first pilot, you need to install the Intel chipset installation utility and reboot.

  http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?cc=us&lang=en&sp4ts.Oid=5359407&AC.admitted=1408825729704.876444892.492883150

  Audio: Accept the agreement.  Download and install the driver first on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  If for some reason, this model Intel HD graphics driver does not work, use this one...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23713

• Cannot install problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.

  Original title: program problem caused to stop working correctly. Windows will close the program and notify you if a solution is available.

  On a number of attempts to install programs on my laptop with Vista home premium OS, I get the message, "caused a problem program to stop working correctly.  Windows will close the program and notify you if a solution is available. "The program closes, but I am never notified a solution, and my attempts to solve the problem have not had any positive results.  Among the programs that I tried to install are not important to me, but I really want to install Blackberry Desktop Software.  Everything seems to go well with the installation until suddenly I get this message.

  Hello

  1. what programs are they?
  2. What are they compatible with windows vista?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: To restore your computer to a Normal startup mode, follow these steps:

  1. click on start in the box start the search.
  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• I installed Dell Windows Vista on the Vaio, I can't do the drivers and software

  I have the Sony Vaio VGN-CR220E Vista Home Premium was pre installed on. I had to reinstall and borrowed A friends Dell CD. Nothing works right. How can I get the right programs for my Vaio

  It does not work like that

  You cannot use a disk from Dell on a Sony Vaio.

  http://eSupport.Sony.com/en/VAIO

  Here are the General news for the recovery to factory settings:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• USB mouse and keyboard stop working after I have install Windows Update KB2913431

  After installation automatic Windows Update KB2913431 (Win 7 Enterprise), the computer seems to work very well, but my mouse and keyboard stop working.  The option of automatic repair after that start with F8 does not work.  He said that the error is "unspecified".

  The fool is that it has created a constellation of intermittent problems when I try other options to get these devices to function after the update.  The questions I will of unpowered USB ports, grateful Windows and install the drivers for USB devices, but then do not recognize their (and are not), random BSOD, restore points invalid system, random boot failure, which causes discs to randomly stop working properly, closed randomly , à... I think you get the idea.

  I think it must be a driver problem.  I passed through the Device Manager and uninstall all hidden devices.  I have updated the drivers for everything that has an update available.  I tried to disable all, but Microsoft services at startup and in the list of "services".  I've always been unsuccessful; However, when I can get it to successfully restore to a point before the update (none of the automatic restore points work correctly) it seems ok.  It will sometimes seem to work after I applied the update, but then go haywire shortly after.  I am convinced that it is not a hardware problem, given that the prior update restores (when they actually cross without failure) work very well.

  I went through countless articles in the knowledge base and tried all the suggestions I've seen, other than registry cleaners because I had a bad experience with this earlier.  I tried so many things that I lost count and the memory of some of them.

  I reached point is never install the update (an option that I prefer not to use) or creating a clean Windows install on another drive (an option that I prefer not to use, but I'm a little more friendly to).  I already started to back up files to prepare a clean install, but I reach out one last time before I pull the trigger.

  Thanks in advance for your suggestions you have!

  Edit: I thought I could include other system information.

  Motherboard: Gigabyte P67A-UMD
  -Drivers for integrated components:
  Related articles - USB:
  -Renesas Electronics 3.0 USB root hub
  -Renesas Electronics USB Host controller 3.0
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1 26
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1C2D
  USB root hub-
  -Generic USB Hub
  -Network:
  -Realtek PCIe GBE Family Controller
  Graphics card: NVidia GeForce 460 GTX (driver c. 332.21)
  Sound: NVidia High Definition Audio 4 x, Realtek High Definiton Audio x 1
  There may be a conflict here: the address of the Realtek driver is 00000201, which is the same address as * a Nvidia drivers.* *.
  Mouse: Logitech (MX518) G3 mouse optical - wired
  Keyboard: Keyboard wired simple Generic USB Dell
  All other USB devices are currently disconnected

  Thanks, but I tried to fix myself on a personal level - my IT Department is not hot.

  In any case, the problem was resolved after much googling - I took possession and renamed a bunch usb*.sys file in the Windows\System32\drivers folder, uninstalled items usb from Device Manager and did a scan for the hardware changes.
  This solves the problem.

• Intel Chipset and USB drivers won't install properly - no equivalent for Windows 7?

  Compal CL51
  2 GB RAM
  32 bit Dothan CPU Intel Pentium M clocked at 1.8 GHz
  ATI Mobility Radeon 9700 graphics card
  100 GB HD
  Windows Experience Index: 3.4

  I was able to install Windows 7 Pro on my CL51 compal without any apparent hitches, except these:
  Intel (r) 82801DBM LPC Interface Controller 24CC
  Universal host controller Intel (r) 82801DBM USB 24 4

  In addition, the function keys volume control does not even if the function for dimmness keys work. Maybe it is something chipset - I don't know because there is no other broken/alerted devices in Device Manager.

  The LPC just shown as an unknown device without no driver interface. I sailed on the drivers from update-> Let me pick-> see her-> everything surfed down for intel and the LPC interface. To paraphrase, he said that it was "not guaranteed to work with System 7. Are you sure you want to do this? Your system might break. "I did anyway and now it manifests, but I don't know its proper operation, although he says he is.

  The USB thing pops up, but then when I unplug the device that seems to use it (TrendNet Clearlink for Skype - model TVP-SP2) you get a triangle of yellow alert on Device Manager. It does not recognize when I plug it in. When I look at its properties in Device Manager, I get this in the status of the device: "Windows has stopped this device because it has reported problems. (Code 43) ». There is no "troubleshooting."

  The windows supports 43 page Code issue is unnecessary, pointing vaguely to the manufacturer of the device or intel - I can't be sure. (http://support.microsoft.com/kb/310123)

  Code 43
  Recommended resolution

  One of the motors controlling the unit notified the operating system that the device has failed in some way.

  If you have already run the Troubleshooting Wizard, you can view the documentation for the hardware for more information about diagnosing the problem.

  The only "documentation" that accompanies this was a quick start and user guide. It works halfway. It stops working correctly, and you end up having to reinstall the drivers if you unplug the unit. Every time.

  The closest I can understand, I need Windows 7 support for all the things Intel 82801DB/DBM on my computer. The Intel site is too vague in it's style of support for downloads. I couldn't tell what to download, or even if I had the right to download.

  As for the thing of volume of service - I am used to use it in Windows XP. I would of course only it in Win7.

  If anyone has any suggestions as to what to try next, I would be grateful.

  Thanks for the replies. I went on the Intel site.

  I downloaded the chipset from the Intel site identification software. I discovered that I have a 855 Chipset of the PM. Then, I got on a chat session with the Intel Support cat.

  The short of it is that there is no way to upgrade to this chipset regarding Windows 7 for Intel.

  The transcript of the conversation:

  Intel: Hello. Please use the Customer Support chat service. We are pleased to be of service. How can I help you today?
  you: I have a laptop CL51 compal, which uses the game of 855 PM chips, depending on the software of the identifier, I downloaded Intel. I need Windows 7 drivers, but they are not available for Win7 in the download area of support for this chipset. What can I do?
  Intel: I apologize, but there are no drivers available for this operating system or Microsoft * Windows * Vista *.
  you: when will they be available?
  Intel: My apologies, but this controller has reached its end of life there will be no new updates for new operating systems software
  you: I now have windows 7 running on the computer. It seems to work fine, except that one of the device drivers come with the yellow triangle. I can do everything I have to except the function keys are not express of adjusting the volume (volume up and down with function keys). How crucial the chipset is correct for a functional system?
  Intel: This new operating system must have all the required software for this chipset work, so it should be good, but with limited capacities
  you: Control Panel-> Device Manager-> other devices-> unknown device-> properties-> "the drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information. To find a driver for this device, click Update driver. »
  Intel: excuse me, but we would not know what device means the Device Manager, this chipset was not intended, and it is not tested for Microsoft * Windows * 7, at this point, you can use this operating system at your own discretion
  you: Yes, I thought. However, when I go to the dashboard-> devices and printers-> laptop-> Trouble Shoot it seems to think it is called Smart@IO. Is something Intel?
  Intel: He doesn't seem to be a controller of us
  Intel: You may need to verify with the laptop manufacturer to see which devices are installed on this system
  you: under control panel-> Device Manager-> other devices-> unknown device-> properties-> general it is said "location: on Intel (r)" 82801DBM LPC Interface Controller - 24CC "»
  you: this seems Intellish.
  Intel: This is part of the chipset controller, but as mentioned, there is no software for this controller that run on Microsoft * Windows * 7 and this operating system must have the software required to make this mature product to work
  you: so the problem of chipset is not relevant?
  Intel: It seems to be, please keep in mind that you are using a non validated platform
  you: it's the fact that I can't use function keys to change the volume of the sound related to the chipset?
  Intel: Is not part of the chipset
  you: so another driver is required for the volume function keys work correctly, no Intel...
  Intel: OK, most of these devices is third-party components
  you: OK, so if I don't use the chipset, what exactly he controls?
  Intel: He will take care of i/o control for USB devices
  you: Okay, that might be the reason why I can't get some USB HID devices to work. Anything with compatibility Win7 looks good, however.
  you: I tried a TrendNet TVP - SP2 ClearLink Skype speaker. It works fine on other systems. Just not this one because of the thing at the end of life on end of Intel. It is likely that if they have a Win7 compatible driver I could operate or I'm stuck here?
  you: it works still fine on new lenovo to my wife with Vista.
  Intel: You may need to verify this issue directly with the manufacturer of your system with TrendNet
  you: my system manufacturer is probably going to tell me that it is an end of life issue - referring me you Intel - but I bet you knew that already huh? . I'll check with TrendNet to see if they can build a new driver for Win7. Thank you. This clears up a lot of things. Hard drives seem to work well. Other USB devices work as well, especially if they are sized to work with Win 7. Once again thank you. Happy new year.
  Intel: You're welcome.

• Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem? ___

  Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem?
  I have also recently set up a wireless network.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• I can't install Service Pak 2 for Windows Vista. I received the error code 0 x 80070490, which has a link on the home page, but it is not working properly and it took me nowhere. Help!?

  Install Windows Vista Service Pak 2 upgrade

  I received the error code 0 x 80070490, which has a link on the home page, but it is not working properly and it took me nowhere.

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• My crashing after windows loading and I have this message - this device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello

  Have you tried to update the drivers as suggested by Basith M?
  
  Method 1:
  You can run the fix provided in the link and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/GP/hardware_device_problems

  
  Method 2:
  You can also try the procedure described in the link to troubleshoot driver issues.
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  
  See also the proposal contained in the link and check.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520/en-us

• 800704B 8-3001 error code stop download of 10 windows to install the drivers and characteristics

  800704B 8-3001 error code stop download of 10 windows to install the drivers and characteristics

  Hello Michael,

  Thanks for posting your query on the Microsoft Community.

  You can improve your current PC to Windows 10 by going to the Windows 10 software download page to download the media creation tool. The media authoring tool can be used to create a USB or DVD media to upgrade your current PC to Windows 10 or install Windows 10 on another PC.

  Follow the instructions on the download page of Windows 10 software: http://www.microsoft.com/software-download/windows10

  Note:

  When upgrading to Windows 10 using media, you must run setup.exe from in your version of Windows 7 or Windows 8 and authentic. If you want to boot from media, you must have upgraded to Windows 10 previously. Boot 10 Windows media directly without upgrading to Windows 10 previously is not supported and will have problems with activation.

  See also:

  Helps the upgrade to Windows 10

  How to: solve the Setup and stop common mistakes during the Installation of Windows 10

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Windows is config not download and install the drivers on windows 7

  Original title: USING WINDOWS UPDATE

  Windows is config not download and install the drivers on windows 7 please help.

  [Tip] Customize the Installation of the driver software from Windows Update device

  hope that helps.

• Window media player saying error not install proplerly and must be reinstalled both on the low loading page do not work 7n and 7 k how can I reinstall WMP on win 7 home premiun?

  Window media player saying error not install proplerly and must be reinstalled both on the low loading page do not work 7n and 7 k how can I reinstall WMP on win 7 home premiun?

  Is - this Windows 7 32-bit or 64-bit edition?

  Open the Start Menu, go to all programs - Accessories , right-click on command prompt and select run as administrator . At the command prompt, type the following command:

  sfc/scannow

  and press ENTER. Let it run until it ends. If it finds no problems, and if so, is he able to correct? That you still get the error then?

  Tim Baets
  http://www.BM-productions.TK

• KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV

  KB2887069 Windows update fails to install, even with the audio drivers and uninstalled AV.

  Background: I am setting up a pavilion of 500-164 equipped with OEM specs, specifically:

  -AMD/Radeon APU

  -Windows 8 6.2.9200

  -See sysinfo below for more details

  The PC brought to the specifications of the plant, with all Windows updates applied with the exception of KB2887069, which breaks down at the update.  With the exception of troubleshooting the failure of the update, none of the changes have been made.  The Windows KB2887069 update fails to install as well through the automated process when tried manually via a direct download.

  Additional troubleshooting measures to date include:

  -Uninstall the software OEM AV (Norton), then by restarting.

  -Temporarily disable all the features of Windows Defender.

  -Temporarily uninstall the audio driver (IDT High Definition Audio CODEC) OEM.

  -Realization of an analysis of the SFC system (with no error found).

  Results: The Windows Update full KB2887069 with a failed State and produced the following results.

  2014-11-15 19:25:08:807 3488 1 b 84 Misc = logging initialized (build: 7.8.9200.17099, tz:-0500) =.
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = process: C:\Windows\system32\wuauclt.exe
  2014-11-15 19:25:08:807 3488 1 b 84 Misc = Module: C:\Windows\SYSTEM32\wuaueng.dll
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Handler: START: Manager: installation CBS
  2014-11-15 19:25:08:807 3488 1 b 84 Manager:
  2014-11-15 19:25:08:807 3488 1 b 84 Manager start installation of CBS update BCA9DC69-8FB6-4B79-8E1B-E706B32B55C9
  identity of 2014-11-15 session 19:25:08:807 3488 1 b 84 CBS Handler: 30409011_3339369637
  the package identity 2014-11-15 19:25:08:807 3488 1 b 84 CBS Handler: Package_for_KB2887069 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.2.1.1
  2014-11-15 19:25:08:822 3488 1 b 84 Manager stand-alone installation with source=C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\windows8-rt-kb2887069-x64.cab, workingdir = C:\Windows\SoftwareDistribution\Download\c3f79bd7f837c5015dba3018d0ab7d67\inst
  2014-11-15 19:25:12:567 3488 Manager e00 FATAL: CBS called error with 0x8007371b.
  2014-11-15 19:25:13:269 3488 1 b 84 Manager FATAL: full install of CBS update with type = 0, requiresReboot = 0, installerError = 1, hr = 0x8007371b
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 3488 1 b 84 Handler: END: Manager: installation CBS
  2014-11-15 19:25:13:378 3488 1 b 84 Manager:
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 880 fa0 Agent * END * Agent: installing updates [CallerId = wusa]
  2014-11-15 19:25:13:378 880 fa0 Agent *.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI > COMAPI - RECOVERY -: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - tender installation complete (successful = 0, succeeded with errors = 0, failed = 1, missing = 0)
  2014-11-15 19:25:13:378 6676 COMAPI - restart required 1a0c = No.
  2014-11-15 19:25:13:378 6676 1a0c COMAPI - WARNING: exit code = 0x00000000; Call error code = 0 x 80240022
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:13:378 6676 COMAPI COMAPI - END - 1a0c: install [ClientId = wusa]
  2014-11-15 19:25:13:378 6676 1a0c COMAPI-
  2014-11-15 19:25:17:605 6676 1 a 10 COMAPI - COMAPI: IUpdateServiceManager::RemoveService -.
  2014-11-15 19:25:17:605 6676 COMAPI 1 has 10 - ServiceId = {b043431c-3a5f-4bf5-b5b2-34a542b07e41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI IUpdateService removal scan volatile package service, serviceID = {B043431C-3A5F-4BF5-B5B2-34A542B07E41}
  2014-11-15 19:25:17:683 6676 1 a 10 COMAPI WARNING: ISusInternal::RemoveService failed, hr = 80248014
  2014-11-15 19:25:17:683 880 524 Agent WARNING: WU client omits CClientCallRecorder::RemoveService with error 0 x 80248014
  2014-11-15 19:25:18:385 880 1a7c report REPORT EVENT: 2014-11-15 19:25:13:378 - 0500 1 182 {807311FF-2CC0-45E2-B903-238AD59E6377} [AGENT_INSTALLING_FAILED] {3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6} 101 501 8007371 b wusa error content install Installation error: Windows failed to install the following update with error 0x8007371b: update security for Windows (KB2887069).
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter::HandleEvents - WER report upload completed with status 0 x 8
  2014-11-15 19:25:18:385 880 1a7c WER sent report: 7.8.9200.17099 0x8007371b (0x8007371b) 3CE1E1A4-CA14-4F2A-BEA1-71029F73AFD6 install Unmanaged 101
  2014-11-15 19:25:18:385 880 1a7c report CWERReporter finish event management. (00000000)
  2014-11-15 19:35:18:718 880 1 to 28 in THE # to THE: initialization of automatic updates.
  2014-11-15 19:35:18:906 880 1 to 28 WuTask WU Uninit Manager tasks
  2014-11-15 19:35:19:795 880 1-28 Service *.
  2014-11-15 19:35:19:795 880 1-28 Service * END * Service: out of Service [exit code = 0 x 240001]
  2014-11-15 19:35:19:795 880 1-28 Service *.

  I find it peculiar that you just bought a HP computer brand new, still-in-the-box, which came with Windows 8, not 8.1, preinstalled Windows. That said, cross your fingers, roll up your sleeves and try the fix following multiple step, I cooked up just for your computer...

  ACTIONS

  [You may want to print these instructions for reference offline.  IMPORTANT => NO SKIP & perform all steps in one uninterrupted session!  [If a step said to restart, restart! ]

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in step #1 above and select run as administrator to run the Norton utility. DO TAP not your keyboard until the race ends, then restart.

  4. right-click on the following link and save the download to your desktop: ie8 - rereg.all.zip [1]

  4B. right click on the file that you saved in # 4 has & select EXTRACT ALL. This will create a new folder in Office also appointed ie8 - rereg.all. The folder contains both scripts below (plus a third that will NOT be).

  Note-online scripts are good for IE9, IE10 & IE11, too,

  5. close all open applications (that is, anything with an icon on the task bar), open the folder created in step # 4 b above & double-click on the file named ie8 - rereg.32on64.cmd to run the script.

  5 b. Repeat this for the file named ie8 - rereg.64on64.cmd then restart.

  6. reset Internet Explorer by the MANUAL of instructions on this page-online http://support.microsoft.com/kb/923737

  Note => for best results, check the option Remove personal settings .

  7 run the Windows Update Troubleshooter from start to finish by the first paragraph on this page-online http://windows.microsoft.com/en-us/windows-8/troubleshoot-problems-installing-updates [2]

  8. restart once more then test by launching a manual check of updates & see if KB2887069 any/all others updated and allows to install now. Follow all the instructions.

  9. assuming all went well, see if Windows 8.1 is available through the store Windows and, if so, if it will be properly installed. Still, follow all the instructions.

  • Upgrade to Win8.1: FAQ
    http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8
  • The upgrade to Win8.1 tutorial
  
  http://Windows.Microsoft.com/en-us/Windows-8/update-from-Windows-8-tutorial
• What's new in Win8.1?
  http://Windows.Microsoft.com/en-us/Windows-8/whats-new

10. assuming that Win8.1 is now installed, perform another manual check for updates & install all Security updates offered (if any); Follow all the instructions.

11. in response to this post with a status report. Also confirm (hopefully) that Windows 8.1 has been installed successfully.

Good luck!

===========================================================
[1] source: page http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en of my colleague IE MVP Kai Schatzl

[2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.