Unstable update after execution of NeroFirstAidKit

Similar Questions

• After execution of the new update (2015.2), I can't read the imported video. Rendering seems to be a color chroma confused. I need help NOW please

  After execution of the new update (2015.2), I can't read the imported video. Rendering seems to be a color chroma confused. I need help NOW please

  FAQ: Why am I getting yellow and red lines running through my images on pause?

  Update of El Capitan.

• Tests for insert after execution of the ApplyMRU

  Apex 4.0, tabular forms.

  I have 2 tabular forms. First is a master. Second is a detail. On pages separate.

  I would like to automatically redirect to the detail, if a new record is inserted on the master.

  I thought that maybe I could test #MRI_COUNT # for 1 after execution of the APPLYMRU.

  So I.

  1. establish a process after APPLYMRU that retrieves the high key out of the master and update a page with the value element.

  2 set up a branch to call detail and set a page element in detail to the master page to the #1 element.

  Tried to make subordinate them to point value #MRI_COUNT = # = 1. Neither the fire.

  Is the concept of test #MRI_COUNT # wrong? Is there a better way to do it.

  Thank you!

  I came up with a solution that works. Not very elegant. A little brutal. But it works.

  1 insert a PL/SQL block process that runs on submit before ApplyMRU. Captured key high on the table. Moved to Pxxx_OLD_KEY.

  2. Insert a PL/SQL block process that runs on submit after ApplyMRU. Captured key high on the table. Moved to Pxxx_NEW_KEY.

  3. put a branch to the detail page that has unwound on condition that Pxxx_OLD_KEY! = Pxxx_NEW_KEY and SUBMIT button. Past Pxxx_NEW_KEY to the details page.

  If there were updates only the front and after the key would be the same. If REMOVE the button has been pressed the direction would not run.

  Not particularly proud of it. But it works so far.

• Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Hello

  The best way to save battery life is to go into the settings and turn off Apps Refresh

  I now get 3 / 4 hours of battery life more.

  You cannot return to a previous ios 9.1

  See you soon

  Brian

  PS

  If you still have a problem iCloud backup now

  Then restore settings to get rid of any bugs.

• TestStand 2014 F1 Patch removes the report itself after execution of finishing

  Hi all

  today I installed the patch 2014f1 TestStand and after that, I recognized that TestStand removes my reports of ATML5 by itself after execution of finishing.

  I'm active On-The-Fly Reporting and store reports in different places for each sequence. This place, I determine in the PREUUT callback.

  During execution, I see that the report is generated exactly at the specified location, but if the execution is complete they will be removed immediately. I don't know why?

  Do I have to remove the f1patch? Someone at - it the same problems?

  I will be happy if someone has a suggestion what to do.

  Thank you very much!

  Hello

  I created a sample file to show the effect (see attachment). I think I found the problem and it's my fault.

  I have seen that it is me who deletes files (SetReportPath.vi). Before you begin the statement I want to erase the reports directory.

  When I work with my custom GUI LabVIEW (uses parts of the SimpleUserGUI-example of TestStand, singlePass-execution) everything works fine. The SetReportPath.vi removes the old reports and after the execution of this new report remains in this directory. PreUUT-reminder, therefore, seems to be executed only once. The same thing happens if I use TestStand SequenceEditor for the execution of the sequences and use there "SinglePass.

  When you use the SequenceEditor TestStand to perform sequences in Mode TestUUT the new report is deleted after that first Test USE ended and I click on stop in the USE Information-dolls. I think the PreUUT callback is called here and SetReportPath.vi deletes my report. This seems logical.

  With this routine I'm working now for two months and I noticed that the "deletion" just after the installation of the Patch TestStand2014f1. So I think that there are some changes by calling PreUUT-reminder, but I'm not sure. Maybe you can check this.

  Thank you!

• plot update after each iteration

  Hello

  I have an example of data code where I collect data on different devices.  Can you help me to update "GRAPHIC 2" to display all of the plots on this graph."  However, I would like FIGURE set 2 updated after each throw outside of the loop.  [After the 3rd iteration of the outer loop (defined by "outer loop"), "GRAPH 2' should therefore 3 plots and so on..."]

  Thank you

  hiNi.

  Hello hiNI

  Do you want something like that?

• Gettinng less updates to Windows Update after formatting Windows

  Original title: problem with Windows Update after PC format

  Hello, I have Windows 7 x 64 OEM and today I had to format 6 times my PC because of my graphics card.

  Problem which is the 5th time that I formatted my PC, WU shows me less up to date than the first time. And in format 6, least of all day.

  How can I solve this problem? Thnaks.

  Hi Josele69,

  Whenever you install a new update, it contains the updates released before. If you will get only the recent updates. When you run windows update, you also receive only for new updates when you're done with the updates offered. This might be a reason you found less updates after formatting windows.

  For more information, see the links:

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I do I check Windows Update after installing Windows 7 if my internet interface does not work?

  My only internet connection is done by an AT & T USB Connect 881U (mfg Serra wireless). Windows 7 update Advisor indicates that

  I need to check Windows Update after installing Windows 7 to make sure that I have the latest driver for this device, otherwise it can not work.
  If this does not work I have no way of checking Windows Update. Any suggestions of how I could get out of this situation if it happens.

  When all else fails RTFM:

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• need to reinstall updates after reformat

  I have to go to the cumbersome process of reinstall all updates when I reformat the hard drive of my laptop?

  Lenovo has created three partitions on the hard drive installed. The smallest drive C contains Windows and software pre-installed. And I was told that the C drive should NOT be resized if not the OneKey recovery no longer work. But we are given the D drive which is MUCH bigger to contain all my personal data.

  updates take up a lot of my disk drive of the insignificant C, 19 GB space, which, in the end, let me about 700 MB to work with installing progs more. with do I find n reinstall every single update after reformatting the hard drive or do a system restore point? in this way he doesn't eat any more space in my C drive good?

  If not, grateful if you can advice me how to handle this accordingly.

  Hello Vanity.sha,

  Thanks for your reply.  A new installation of any operating system takes about 2-4 GB of space in the partition & after OneKey recovery on system should have been about 75% of free space available. I think there could be some unwanted files & folders on your system, so try to free the C: drive & then try to deploy the update for Vista.

  In addition, Microsoft & 3rd-party application has the ability to store the program files on all available disks, you can install these applications depending on the free space.

  I hope this helps.

  [If this post can help solve your problem, click on the button 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  --

• MS Win XP SP3 Tech support ends in July 2014, they will still provide security updates after 07/2014?

  Fact average email for technical assistance to MS Technology Services / and or chat live with MS Tech, and that's what will be abandoned after 07/2014. I need the security updates after this date for Dell M6300 (Business / Govt.) laptop. Is there a new OS MS (Vista, Win 7?) that runs on the machine Core Duo T7500 w / 2 GB SDRAM. It's my personal machine I use at home, connected to the Internet. I can't afford to buy a new machine.

  We are currently in the final phase of support for Windows XP. It is called "extended support". As you can see on this page:

  http://Windows.Microsoft.com/en-us/Windows/products/lifecycle

  ... There will be no security patches released after April 8, 2014.

  You should be able to run Windows 7 just fine on a PC with processor and memory that you specify. For more information, see:

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

• How to speed up the process of updating after clean install

  original title: updates after a clean install

  I just performed a facility clean my machine that runs Vista Home Basic Edition and is now trying to download all the updates it has had over the past three years (ex-factory).

  However it will slowly (no surprise) and I was wondering is there something I could do to speed up the process.  Currently, I am just by clicking on start - Windows Update and let it download what they want from there.  However I have noticed saying she "Download 80 updates", it installs then say 5 of those, restarts and then says "Download 75 updates"-have I really downloaded updates and then lost 80 them, or he really download only 5?

  I also thought the oldest download first, but I can't seem to find an opption to do this - is - it possible?  It seems just stupid for me to download updates of 2010 before those of 2008 (assuming that's what he does lol!)

  All advice or pointers that would help to do that, go a little faster would be immensely appreciated.

  See you soon

  Q

  I just performed a facility clean my machine that runs Vista Home Basic Edition and is now trying to download all the updates it has had over the past three years (ex-factory).

  However it will slowly (no surprise) and I was wondering is there something I could do to speed up the process.  Currently, I am just by clicking on start - Windows Update and let it download what they want from there.  However I have noticed saying she "Download 80 updates", it installs then say 5 of those, restarts and then says "Download 75 updates"-have I really downloaded updates and then lost 80 them, or he really download only 5?

  I also thought the oldest download first, but I can't seem to find an opption to do this - is - it possible?  It seems just stupid for me to download updates of 2010 before those of 2008 (assuming that's what he does lol!)

  All advice or pointers that would help to do that, go a little faster would be immensely appreciated.

  See you soon

  Q

  Start by installing the latest Service Pack (see http://support.microsoft.com/kb/935791). You'll have so far fewere updtes to install.

  Also note the following regarding your answer to the question of PA Bear "clean install has been through choice. After 3 years machine has become bloated and slow, and I decided to wipe them fresh, start over and give up unused programs that seemed a good idea at the time. » :

  In my view, it is usually a mistake. With a minimum of care, it should never be necessary to reinstall Windows (Vista or any version). I ran Windows 3.0, 3.1, WFWG 3.11, Windows 95, Windows 98, Windows 2000, Windows XP, Windows Vista and Windows 7 now, each for the period of time before the next release is out and everyone on two or more machines here. I never reinstalled none of them (with one exception--a problem that I worked on for weeks without success), and I've never had anything more than an occasional minor problem.

  It is my belief that this erroneous notion comes from the technical support people in most of the major OEMs. Their solution to almost any problem, for they know not quickly answer is "reformat and reinstall. It is the ideal solution for them. It gets you phone turned off quickly, it almost always works, and it does not need to do any real troubleshooting (a skill that most of them has obviously not in any great degree).

  But it leaves you with all the work and all the problems. You must restore all backups of your data, you must reinstall all of your programs, you must reinstall all Windows and updates of the application, you must locate and install all the necessary drivers for your system, you will need to recustomize Windows and all your applications to work the way you are comfortable with.

  In addition to all these things being long and painful, you may encounter difficulties with some of them: you will find all your CDs application? You will find all the necessary installation codes? You have data backups to restore? You still remember all the customizations and settings that can be installed to make everything work the way you like it? Sometimes there are problems that are so difficult to resolve that Windows has to be reinstalled properly. But they are few and far between; RESETTLEMENT should not be a substitute for troubleshooting; It should be a last resort, to do that once all other troubleshooting by qualified person attempts have failed.

  And perhaps most important: If you reformat and reinstall without knowing what caused your problem, you will most likely repeat the behavior that caused it and quickly find yourself in exactly the same situation.

• Problem with Windows Update after the removal of Virus

  My operating system is Win Vista 32 bit, had some virus closed my windows updates, have a view of the white page. Checked that my services and win update is in automatic mode has started, so I don't know why my updater gives me a red x saying windows updater is turned off.  Any suggestions?

  [Original title: Windows Update]

  https://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/problem-with-Windows-Update-after-removing-virus/3a8dd279-2732-4693-88bf-f5cea4afca96>

  It makes more sense. How to reset the Windows Update components?

  Yet, as indicated in The ball , the search results links do not work. I also used several browsers and DuckDuckGo. Maybe it's because the Windows Update Agent was changed some time ago and the article is no longer valid.

  EDIT: If the OP is also struggling to access the link I suggest using repair Windows updates available from tweaking.com. I suggest also using the Registry backup of the same author before hand.

  Repair the Windows updates

  http://www.tweaking.com/content/page/repair_windows_updates.html

  Registry backup
  http://www.tweaking.com/content/page/registry_backup.html

  I hope this helps.

• Error 8024402f Windows update after installing service pack 2.

  I received the error: 8024402f for windows update after installing service pack 2. I tried to fix it and manual fixation on this website http://support.microsoft.com/kb/836941, but I still receive same error code what do I do? I checked the history update, but it is not a failure to update.

  Original title: 8024402f error Code

  Hello

  Often we see weird behavior as the result of a program of loading during the startup process.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  We'll do this before uninstalling Service Pack 2.

  If the behavior persists, then we can clean boot, uninstall and reinstall Service Pack 2.

  Best regards

  Matthew_Ha