Unusual error

Similar Questions

• CFINCLUDE raises an unusual error with specific file

  I have a file named verb_add.cfm that I want to include in another cfm file.

  I have a line in my code as follows:

  < cfinclude template = "verb_add.cfm" >

  When I run this code, I get a most unusual ColdFusion error:

  Unknown tag: cfinclue.

  Note the missing "d" of cfinclude in the error message. Yes it is spelled correctly in the code, but the ColdFusion error message has only "cfinclude" once in the error message when you view the line of code causes the error. All other screens on the error page are "cfinclue".

  I can change the name of the file, for example to verb_add2.cfm and then change the template = "" to match and get the same error of cfinclue. "

  I can include other files without any problem. But just this file, regardless of the actual name of the file, will always throw a cfinclue error.

  I restarted ColdFusion and cleared the cache of the model of the ColdFusion admin.

  Any help would be appreciated.

  You have 'save class files' enabled in CFAdmin?  If so, turn it off and leave that it disabled. and go it delete all the files in the dir of redone cfclasses test.

  Are you sure that the error message reports what you think it is?  You have no match for "cfinclue" anywhere in your project?  That said, it would give a compilation error (not a runtime error), so it should be pretty self-explanatory as to where the problem is, I guess...

  Curious.

  --

  Adam

• Cannot install windows update KB2160841. Error 2 - windows update has encountered an unknown error. -Vista

  Update Windows installed 17 updates except kb2160841 .net Framework 4.0. I'm using vista Home premium. I rebooted my computer and tried to install it still no luck. Please help me solve this problem, since it is tagged as critical.

  Thank you

  Unusual error (normally associated with language updates).

  See: http://support.microsoft.com/kb/2160841

  Prerequisites

  To install this update, you must have Windows Installer 3.1 or a later version installed on the computer. To get the latest version of Windows Installer, visit the following Microsoft Web site:

  Windows install 4.5 Redistributable

  Known issues with this security update

  For more information about installation issues with this security set to day or with Microsoft .NET Framework 4, click on the number below to view the article in the Microsoft Knowledge Base:

  2436246 updates for .NET Framework may not have a completely localized setup experience
  2431208 an update for Microsoft .NET Framework may not settle when MICROSOFT.NET Framework 4 is installed, and a restart is pending
  2260913 files currently in use or file locks can result in the Assembly of frame being deleted files
  2263996 patches of Microsoft Framework may fail and access is denied or the file by user error

  Otherwise:

  How to get help and support for this security update

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Muse-how Adobe fix the 500 error?

  Hello

  I get this error 500, when exporting to html format in Muse. It is said that Muse have problems of creating a code for one or more web fonts. Even after changing all fonts in the system fonts, I get the same message... which is unusual. Then, when I tried to use Arial for all text, I got the same message. Even for Muse Arial cannot generate the code? Is this a bug, and that I should wait for Adobe release another updated for Muse CC? Please can someone help with this unusual error. Thank you.

  Hello

  Please refer to the link below below that has the similar discussion.

  Could not generate code to activate one or several web fonts [Error 500].

  Kind regards

  Vivek

• Impossible to make FaceTime calls on iPhone 7 using Siri

  I tried to use Siri to do a FaceTime call tonight and gave an unusual error: "I wish I could, but FaceTime is configured with me yet."

  I'm able to get Siri to open the FaceTime app, simply cannot access directly from my contacts and apart from this Siri works fine on the iPhone 7, including SMS and regular audio calls.

  I tried a FaceTime using Siri call on 3 old iPhone models (5s, 6 + and 6s), all running iOS 10, and it worked properly on each of them, she was with both iOS 9 and 10 on the same model of 6s for the past year, so this leads me to believe it's a problem iPhone 7 (or an individual defective unit) rather than a problem of iOS 10.

  I checked a number of settings on the iPhone 7 before coming here:

  • Siri is enabled.
  • FaceTime is activated.
  • Restrictions (general-> Restrictions) are completely shut down.
  • iCloud-> contact is activated.

  Hi there jsf23!

  Welcome to Apple Support communities, it's my pleasure to help you with your iPhone 7 issue of Siri is not able to make FaceTime calls.  I use Siri all the time and have his power making FaceTime calls is another great feature.  Looks like you have checked a lot of things I want to check too, if I fell on the same subject.

  At any time, that there is a problem with Siri or FaceTime, the first thing I recommend is to restart the iPhone and retest Siri and FaceTime.

  Restart your iPhone, iPad or iPod touch

  If Siri is still underway on issues from a FaceTime call, try to perform a reboot of the force.  Remember, this will be a little different on an iPhone 7.

  • On an iPhone 7 or iPhone 7 more: press and hold the sleep/wake and Volume buttons down for at least ten seconds, until you see the Apple logo.

  Test again and then try to check for updates.

  Update the software on your iPhone, iPad or iPod touch iOS

  Have a great day!

• Windows could not finish repairing the problem because it is impossible to perform the following action: renewing your IP address

  Last night after doing a reboot of my internet has stopped working.  I get the error indicated in the title, when I click on 'repair' under the Local area connection status window.

  I use a cable modem and going through a wireless router.  I know they work because I'm there access wireless typing to you all.

  When I type "ipconfig" in the cmd program, I get the following (which I thought was weird):

  Suffix the connection-specific DNS: cm

  IP address: 0.0.0.0

  Subnet mask: 0.0.0.0

  It was also strange to me that I could not access my router by typing 192.168.1.1 in my IE window.

  Also, why I type ipconfig/release, I get a message that says "IP address for the connection to the Local network map is already out." and when I type in ipconfig/renew, I get "an error occurred upon renewal of the connection to the Local network interface: the RPC server is unavailable."

  Just another note to add, I did a restore of the system to a point a week before I had the problem and I still have the same issues.

  I hope it is enough detail for each of you experts out there.  Thank you in advance! :)

  PS Sorry if this has already been answered, I was digging through forums for the last two hours.

  Your machine is not getting an IP address from the DHCP server.  Without an IP address, it will not communicate with any device on your network.  The error says "the RPC server is unavailable" or "the RPC service is unavailable"?  Whatever it is, make sure that your DHCP client service and your RPC service is running:

  Start-> Run-> "services.msc".

  In the window that appears, confirm that the "DHCP Client" and "RPC Remote Procedure Call ()" is present and that its status is "started" and its Startup Type is "automatic".  If this isn't the case, double-click top and doing it this way.  Also check your syslog, unusual errors:

  Start-> Run-> "eventvwr.msc".  Check the logs 'System' and 'Application '.

  Hope this helps,
  JW

• Reboot/shutdown Windows properly troubleshooting system

  Sorry to ask this question, but we have a great debate going on at my office on this subject.  If Windows XP or earlier versions, is not frozen hard, but you are having an unusual error as Excel does not correctly or IE not behaving normally... and the closure of explicitation and pick-me-up in the new has not solved, would you recommend going to Start Menu, Shut Down menu and then click on stop or restart... Or by leaving it in Windows, press and hold in the power button on the PC until it turns off and on again?  I think that finally the powering method without doing a clean shutdown could add up to issues down the line and is not a method I would use unless absolutely necessary.

  Hello

  ·         What happens exactly when you try to open Excel on the system or when you try to access Internet explorer?

  ·         T stop system normally without any problems?

  If you make a stop by force on the system, there are opportunities that you will lose unsaved data. A forcefull stop is not recommended unless that or otherwise, it is necessary. A forcefull stop will cause the drive to stop constantly, which can cause damage to the hard drive.

  In case you are not able to stop, that I suggest you simultaneously press Ctrl + Alt + Delete on the keyboard to bring up the Task Manager, and then select the task running in the applications tab and click end now. Once you have done this you will be able to shut down the system normally.

  Also, I suggest you follow the steps mentioned in the articles below, in case you are not able to stop the system.

  Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

• NVIDIA 3DTV vs WINDOWS7 64 bit

  I try to install the driver, but the system says that I need WIN VISTA or more!

  ASUS G51J with WINDOWS7 64-bit OEM certified and Geforce 260 M...

  Check the driver to ensure that it is a 64-bit driver.  32-bit drivers do not work on a 64 bit system and could give unusual error messages.

  writing in the new message: * e-mail address is removed from the privacy... *

  I try to install the driver, but the system says that I need WIN VISTA or more!

  ASUS G51J with WINDOWS7 64-bit OEM certified and Geforce 260 M...

• Vista key in use/called/activated/work - now what?

  Hello

  I played with my system configuration and reformatted and reinstalled several times.  This last time when I tried to activate, I was presented with the key in the form of use.  I have studied these forums, found the command ' slui.exe 4 ', the number called, used automation successfully.  My copy seems to work as it should (with unusual errors - file copy, very long periods of frost, etc.).

  I don't know what I should write the new "OEM" (wasn't an OEM installation) as presented in the form of information system?  Or my old key (found on the box) will work once more?  If I format it again I need to call this number?

  Thank you

  Dennis

  The old key will work again if you need to format again and you will almost certainly need to use the manual process that you have used before (maybe not, but very likely).  It will work for as long as the computer works - there is no time limit.  The information contained in the information system OEM are essentially meaningless and don't help you to activate or prove ownership or really anything.  What you need to make sure you don "t lose is the product key, then you have serious problems because that's your proof.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• a computer laptop, internet is accessible only if proxyserver offline, my office internet is accessible with the proxy server. without him we cannot access the internet.

  I am faced with a kind of strange and unusual error. in my office, the internet is accessible with the proxy server. without him we cannot access the internet. However, there is a laptop computer on which some time the internet is accessible only when I leave the proxyserver only on that machine... any idea?

  Hello

  Work on a domain environment?

  Changing the proxy settings is something that you usually only have to do if you connect to the Internet via a corporate network. By default, Internet Explorer automatically detects proxy settings. However, you may need to manually set a proxy with information supplied by your network administrator.

  If you are on a domain environment then please post the question on the link mentioned below using:
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• Question "Add to cart".

  Hello

  I recently created a website: http://www.harcourtsonlineshop.co.nz/

  It is a copy of this site: http://www.tekotagoshop.co.nz/

  The new site has an unusual error; When an element is added to the basket he sometimes displays and sometimes does not display items added to the shopping cart. In some cases, when items are added to the shopping cart and "see basket" is selected - the basket is empty.

  What is the best way around this question, we had various online customers complain about this problem and they began to send their orders by email, very embarrassing.

  I noticed that you are using in 2 places on the site one on the upper right corner and one at the bottom right, I think that altogether they can't operate this way, try to use only one and begin again.

  I also noticed that your scripts are blocks AJAX in your site, so when you click on the add to CART button is something contradictory look at scripts and put them in the order

  This is the error that you should search the debugger 'refused to set the dangerous 'Connection' header - prototype - core.ashx' once this message does not appear on the page, it should work.

• Disorder of the creative cloud while accessing programs

  Hello, I am a member of the creative cloud like Ekingen Elektronik. As an unusual error occur suddenly and I can't launch the programs. Please help me:)

  CC applications close immediately after the launch

• BI Publisher Document processor fails after upgrading on AS / 400 V5R4 to V7R1

  We used BI Publisher for four years now, and when we have improved our operating system to V7R1, we get unusual errors when calling processor documents.  We run the same exact order on two different machines, and we get a FileNotFoundException exception on the new (V7R1 box).   Studied the newspapers in both machines, we get the following:

  = > RUNJVA CLASS (oracle.apps.xdo.batch.DocumentProcessor) PARM('-debug' '-tempdir' '/e1je/UAT/Outbound/XPTempDir' '/e1je/UAT/Outbound/WORKDIR/70207_308131654402711.xpctrl')

  Java.version property has been detected as input. This property is used as the output only and has no effect on the initialization of the JAVA virtual machine.

  [081613_124243749] Oracle XML Parser [] [STATEMENT] version: Oracle XML Developers Kit 10.1.3.0.0 - Production

  [081613_124243753] [oracle.apps.xdo.batch.DocumentProcessorEngine] [STATEMENT] the xdo.cfg was not found.

  [081613_124243768] [oracle.apps.xdo.batch.DocumentProcessorEngine] [STATEMENT]

  = > startElement(): startDocument entered < =.

  ==================

  [081613_124243781] [] [STATEMENT] Logger.init (): * DEBUG MODE IS DISABLED. ***

  [081613_124243781] [oracle.apps.xdo.template.EFTProcessor] [STATEMENT] EFTProcessor constructor is called.

  [081613_124243785] [] [STATEMENT] Logger.init (): * DEBUG MODE IS DISABLED. ***

  [081613_124244201] [oracle.apps.xdo.batch.FileSearch] [STATEMENT] /e1je/UAT/Outbound/XPTempDir/081613_124243754/4.xdo is deleted

  [081613_124244204] [oracle.apps.xdo.batch.FileSearch] [STATEMENT] / e1je/UAT/Outbound/XPTempDir/081613_124243754 is deleted

  [081613_124244560] [] [STATEMENT] WARNING: old RTF version detected, disabled nested table

  [081613_124244608] [] [STATEMENT] - cell by rank: 2.

  [081613_124244805] [] [STATEMENT] Add: {TYPE of MODEL (:4)} HLDR

  [081613_124244805] [] [STATEMENT] Add: {FIXED_POSITION_BASED (STR)}

  [081613_124244807] [] [STATEMENT] - cell by rank: 2.

  [081613_124244807] [] [STATEMENT] Add: {(:4)} HLDR OUTPUT CHARACTER SET

  [081613_124244807] [] [STATEMENT] Add: {iso-8859-1 (STR)}

  Values here loading

  [081613_124245599] [] [STATEMENT] expression: rpad ((CONVERT_CASE (TO_CHAR (»),

  ("NONE")), 1,' ')

  [081613_124245600] [] [STATEMENT] - cell by rank: 2.

  [081613_124245601] [] [STATEMENT] Add: {END LEVEL (:3)} HLDR

  [081613_124245601] [] [STATEMENT] Add: {V558671A_S8 (STR)}

  [081613_124246022] [oracle.apps.xdo.common.xml.XSLT10gR1] [STATEMENT] Oracle XML Developers Kit 10.1.0.5.0 - Production

  [081613_124246027] [] [EXCEPTION] java.io.FileNotFoundException: /e1je/UAT/Outbound/XPTempDir/081613_124243754/4.xdo (a file or a directory in the path name

  OES does not exist.)

  at java.io.FileInputStream. < init > (FileInputStream.java:126)

  at java.io.FileInputStream. < init > (FileInputStream.java:85)

  at oracle.apps.xdo.template.eft.EFTGenerator.loadXSL (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.xsl2text (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.endElement (unknown Source)

  at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:210)

  at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1310)

  at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:328)

  at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:295)

  at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:258)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.process (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessor.process (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessor.main (unknown Source)

  [081613_124246029] [oracle.apps.xdo.batch.DocumentProcessorEngine] [EXCEPTION]

  java.io.FileNotFoundException: /e1je/UAT/Outbound/XPTempDir/081613_124243754/3.xdo (a file or a directory in the path name does not exist.)

  in java.io.FileOutputStream. < init > (FileOutputStream.java:194)

  in java.io.FileOutputStream. < init > (FileOutputStream.java:84)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.xsl2text (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.endElement (unknown Source)

  at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:210)

  at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1310)

  at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:328)

  at oracle.xml.parser.v2.NonValidatingParser.parseDocument (NonValidati ngParser.java:295)

  at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:258)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.process (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessor.process (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessor.main (Unknown Source) [081613_124246030] [oracle.apps.xdo.batch.DocumentProcessorEngine] [STATEMENT]

  = > startElement(): endDocument entered < =.

  ================

  [081613_124246030] [] [STATEMENT] output-> 0: null

  [081613_124246030] [] [UNEXPECTED] DocumentProcessor: batch xml-> 2,494 seconds processing time

  Complete Java program

  It seems it is the removal of the temporary directory until it is finished with it.  Any help on why this might be involved would be appreciated.

  Doug

  It was a problem in the file xdocore.jar of Oracle.  We receive the last patch of them and the problem was solved.

• TALENT installation receiving invalid LINK TABLE on peopletools8.51HR

  Hi all
  
  I currently install peopletools 8.51 and HRMS 9.1. When executing scripts for data mover, I have a very unusual error. When you import the table PS_INSTALLATION it gives me the following error: return: 904 - ORA-00904: "TALENT LINKS": invalid identifier, SQL has failed, sstmt: insert into PS_INSTALLATION... "
  
  Any suggestion is welcome.
  
  Thanks in advance.
  
  Dennis

  846989 wrote:
  ... I ran the scripts for PT first, and this error occurs during the installation of the application of human resources.

  And this is your error is coming from. You should not install PT first then MFC application in the same database.
  Do not create a database system peopletools then add application in there.

  If you set the database in Data Mover, simply create the MFC (demo or sys) application that includes the PT as well.
  Now what to do next? Drop and re-create the database would be probably the most reasonable get all rights.

  Nicolas.

• openSUSE 11.1 and 11 GR 1 material/11 GR 2 installation

  How can I install GR 11, 1 material on opensuse 11.1?
  is there a problem with XFS, REISER fs and GPT suse 11.1 with ora 11 GR 1 material/ora 11 GR 2 db db?
  
  Published by: king_of_all_kings on 10 Aug, 2009 13:03

  king_of_all_kings wrote:
  [http://en.opensuse.org/Oracle_on_openSUSE]

  can you ensure this link and the information contained in the link of opensuse?

  Yes, this is a link to OpenSuSE. And material for OpenSuSE 10.2 and 10.3 certainly doesn't. It used myself.

  But "it works" and "can I use it systematically, safer and no unusual errors" are two completely different things. Go ahead and use it. But please Don ' t cry for help when it breaks.

  and that XFS say... is history behind XFS is the same as reiserFS?

  MetaLink, Oracle notes (414673.1) "file system not supported for help... or using XFS... can cause the redo log corruption... "The note goes on to suggest that it can be fixed with some versions of XFS. Then use XFS at your own risk.