Unusual noise. Tick.

Similar Questions

• Whenever I have insert a device into the port I heard an unusual noise from my laptop

  Original title: usb device

  Any time I incert a device in the port, I heard an unusual noise from my laptop.

  Hello

  It could be Connect Device noise - double click on the little speaker near the clock below
  right and MUTE (speaker under the cursor symbol).

  If that stops the sound and you want to permanently stop without using the MUTE - right
  Click on the small speaker - sounds - search device connection and set it to NONE.

  If inhibition does not stop the noise could be disturbing, and I would have the computer controlled
  by a real computer store (not the leeks and the glances at a Best Buy or other stores) or the
  Support of the machine system.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• iPhone 7 weird noise ticking after sending message sound

  Hello

  I use an iPhone 7 for 4 days now and yesterday, I, after I send a message (using iMessager, Wechat or Whatsup), I started noticing a sound weird/click tick immediately after application. That weird noise resembles a small distortion in the enclosure which happens after some noise is played.

  Did anyone encounter the same problem?

  Thank you in advance.

  Best regards

  Ricardo

  Same here, but also after taking a screenshot. Shortly after the sound of the camera.

• Noise from HDD on my brand new DX730 - 10K

  I'm sorry for my bad English skills, but I will try to explain my problem.

  I bought my DX730 a few days ago and especially I'm frankly pleased with the pc, but I'm worried by the hard drive.
  In my opinion it works a little to rabies because the laptop I had before was quieter, in caprison to the pc.

  Is it normal to hear the hard drive obviouisly?
  Or is there something wrong with it?

  I would be happy to answer!

  Hello

  It of always difficult to give you advice without checking the noise.
  But in most cases its nothing that a HARD drive makes an unusual noise.
  The noise is due to the rotation of the disk and the read/write head movements.

  In addition, the noise can be stronger or quitter using different hard drives from different manufacturers, so in my opinion, you should not be worried, but to be safe, back up the data always.

• C50-A-1DV satellite makes strange static/buzzing noise

  My brand new toshiba laptop is constantly producing a strange humming/static noise that seems to come from the fan.

  I don't know if this is the case with all these models but it's pretty boring and I fear that something could be wrong with the laptop.

  Please can someone help me on this one?
  What can be the cause of the strange noise?

  As I said it seems to come from the fan, but I'm not 100% sure.

  Have you noticed this buzzing/static noise while turning heavy fan?

  For me it of very difficult to tell if it s a good fan noise or unusual noises that may be related to problems of cooling module.

  On the other hand, you are not sure if the noise comes from the fan, so I think we are groping in the dark to 100%

  From my point of view of the few the laptop is new and if you don't know if there is a hardware problem, you should ask a favor for the engineer and check.

  Mate sorry but at this point, I have no other 'solution' for you :(

• Hard drive MacBook Pro broken?

  Hi all

  Last night my Macbook hung - spinning wheel and non-sponsive so difficult to hold down the power button and I think I have hard disk problems:

  I get the grey folder flashing when I start.

  Boot in safe mode does not work.

  Boot in Apple Hardware test does not work

  I can boot to OS X Utilities (cmd + r) and have tried to restore from a backup and it does not find a local disk to restore. I have a backup stored on the time machine.

  I also tried to restore Mac OS X from the same menu - and even when it does not find a local disk to restore.

  I ran disk in the same menu utility and I do not get an option to check the disk (in gray) or erase disc (also grey).

  Can anyone advise on the next steps before I take it down to the Apple store? Far from being a guru on this stuff! MacBook is 13 "and 5 years with 512 MB hard drive. Ran the Mavericks.

  Thanks in advance!

  Common symptoms of a dead hard drive

  Hard drive makes a clicking, whirring, grinding noise ball ping pong or any other type of unusual noises.

  Hard drive does not spin.

  Computer does not recognize the hard drive.

  Slow loading of applications.

  The system freezes and crashes.

  An interesting site - sounds of hard disk by the manufacturer of the drive.

  

• Toshiba Store Alu 3.5 "1 TB external USB HARD drive does not

  I turned on my laptop with my hard drive is connected.
  It flashes blue and everything and the computer recognizes that there is a usb device it but it freezes Windows Explorer.

  When I tried to click the hard drive icon, it says the device is not accessible.
  It does not unusual noises high expectations or clicks. I tried to unplug and every bit nothing helps.

  I read somewhere else that it can be a power supply problem? (a few days ago I had a really small power cut which lasted a second...)
  I really hope that this isn't a drive failure hard because I have 250 gb of music in there! Should I send in repairs?
  If so, my data would be deleted? I had this for only less than a month.

  Thanks in advance.

  > It seems to work on other computers without problem, but on mine, it is not
  In such cases, it s not a problem of disk HARD but eventually its computer number you and, eventually, the OS does not contains some drivers / extract, etc. eventually the operating system must be updated

  Welcome them

• Death 6 s Iphone iOS 9.2.1

  My Iphone was in charge and saves on my computer, when it makes an unusual noise.  On checking, the screen is black, and it should have been fully charged (he was attached to the computer for more than 3 hours and slowed down). Hold the power button does not restore phone, or not changing to 240v power.  Windows 10 message stated does not have USB, cable is the original USB supplied with the phone.  Any ideas please?  Phone was bought November 2015. Receive also cannot sync-54 error when you try to synchronize - although looks as if synchronization and backup work, seems to skip a step (3? or 5?).  Appreciate the advice on these issues.

  Have you tried to reset the unit: hold the home and power buttons at the same time and continue to hold until the Apple appears (compared to 30 seconds - seriously). If the Apple display, then reset takes place and the Slide to Unlock screen will display shortly.

  See you soon,.

  GB

• Satellite L550-1CC starts by checking the records of consistency

  Hi all

  I have a Satellite L550-1CC, running Windows 7.
  Recently, the departure until I received the message "one of your disks needs to be checked for consistency", and then it runs a scan, and after 2 0r 3 minutes boots up to windows as usual.
  This happens not all the time, but recently, more often.

  I have a problem with my hard drive?
  Any suggestions?

  Hi shaun1d,

  Have you noticed some unusual noise from the HARD drive?

  I've never had such a problem on Windows 7, but it would be interesting to know if you can find some information about it in the same Windows Viewer.
  Have you looked there already?

• LJ Pro M1536dnf MFP: is more duplex

  My LaserJet Pro M1536dnf MFP stopped automatic duplex printing. Once I choose duplex printing and rather fo print on both sides of the paper, the document was printed recto with each page on a sheet of paper. I tested and it will do is more duplex copy either.

  I didn't hear unusual noises or get the error codes.

  Any ideas?  Others have the same problem. Other that this question is a great printer, especially for the price.

  This printer is a replacement guarantee for one who stopped duplexing while in warranty period. The first unit duplex copies always worked.

  Hi John_Mrtz ,

  Thanks for letting me know.

  You can go only with firmware updates. You can rerun the update of the firmware, but probably it will show that it is already updated. I tried the same exact setting, that you used in the laboratory for the Laserjet M1536 and he did the double-faced properly document. It looks like a hardware problem with the device. I am surprised however that the test internal printed duplex test page.

  There is still one thing that we can try reset the printer back to factory settings. I can send you this information in a camera
  Message. In the forum next to your handle name simply click on the envelope to see.

  Thank you.

• This keyboard would fit?

  Hello

  Some keys do not work or press several keys, so I thought I would buy a new keyboard. The laptop I have is HP pavilion 2154sd G6. is the keyboard, I found and I would like to know if it fits: http://m.aliexpress.com/item/1716656627.html

  Thanks in advance!

  In addition, the first 15 minutes after the start of my laptop my fan makes some unusual noises, ideas?

  There is a plastic frame around the keyboard that holds it in. You have one on your laptop and can reuse just this one. Yes, assuming that your language is Dutch this should work fine for you.

  If it's 'the Answer' please click on 'Accept as Solution' tp help others find it.

• HP Envy 5534: Improper shutdown, cartridge delivers, paper jams

  I tried to print something, and I put the paper in (which was already very slightly bent) and you press on print. While it was printing, all of a sudden unusual noise you could hear then I pressed "Cancel" and the warning that "there is a paper jam it' came.

  I lifted the door to cartridges that come after the door to scan and went out the paper, the paper had a few small holes in it and has been ruffled. Then I tried to print with another, less wrinkled paper and he said ' the following ink cartridges need to be replaced: HABs. I thought it was a mistake, so I tried to take the cartridge out and put back in. He also said that there was an obstruction or jam, he asked me to move the cartridges along the metal tube that they were on and moving back again in the animation. Place the cartridges were certainly in the clasp evenly in a good way, and the cartridges that I returned permanently to the extreme right were he went into a slot. There was a sticky white substance on the tube, so I cleaned it with tissue paper. I tried again, he says a 'transport' or something was unable to move. All the time the printer came with messages such as 'incompatible with the printer' among others.

  I also looked into the mouthpiece with the pinching mechanism that reveals jams paper, to see if there was something that I had missed and he was not.

  So, I tried to move the cartridges again, this time with the printer off, that he had instructed the animation (and I didn't realize to make), and when I turned on it even once, he warned ' improper shutdown. Press the button 'walk' to avoid damage ', so I did. Now I don't know what to do.

  Please help, I know you massively! The printer is my source of life.

  There has been no recent software or driver changes. My internet connection is wireless.

  Thank you very much.

  The removal of lubrication is probably not a big deal, I wouldn't be able to replace at this stage.  Too much lubricant on the stem of transport can attract dust and paper fibres.  If at any time given the squeeks of transport when it moves from one side to the other, I suggest to post back here with a new topic and ask for advise.  Just a very small amount of lubricant, probably, it will be very good for the life of the printer.

• Copy missing originals

  Using an Officejet 7612 to make copies through the automatic document feeder.  Prints fine, but where the hell are the originals?  I tried to open everything I could, but I can't find the originals.  There is no unusual noises, etc.

  right under the ADF, is the status bar for the original.

  You swept a small picture? If a letter size page, it would have been obvious.

• !!! BEWARE OF A SCREEN BLUE (WHEN YOU START YOUR SYSTEM) WITH A LONG QUESTION. WE HAVE ONLY 10 SECONDS TO RESPOND AND REACT TO THE! Somebody has hacked my system / do I have a virus?

  Hi all

  Basically, several months ago I noticed something strange on my computer - I know that I should have acted immediately - my Task Manager has been "disabled by Administrator [my]". Yet, I am the administrator!

  Secondly, I lit my system yesterday and was immediately welcomed with a pale blue screen with lots of white, writing, that says, ' we recommend strongly you do not press "ENTER"...? If you do and you want to move before the expiry of the period...? " However, in time, that I tried to browse what was in front of me (that I was unable to catch everything), a 10 sec period had expired and many more white/numbers/text symbols suddenly started flowing to the bottom of my screen (for 15-20 seconds-from left to right)! In addition, my turn makes an unusual noise - as serious an alert! Immediately after, my system loaded up as usual!

  So, I opened the Start Menu (after I restarted my computer to activate the Safe Mode) and the arrow keys has / not working -I can't navigate upwards or downwards to select one of the options! Yet, they have worked perfectly any other time since - just not in Start Menu! Then, I scanned with Windows Defender and nothing has found summer - my "system is safe."

  Third, since then, I've noticed that my system (Windows XP) ran much more slowly too - informed the script is busy, plug-ins are insensitive, etc. - and the/things are / dragged across the screen! Therefore, I searched the forum and help guide to Firefox for everything that seemed similar and came across an instance of another person things 'slide' with a slow system, who suspects a virus! So, I followed the advice given to them - reset Firefox and download a "10 days free Microsoft Virus Scanner" (recorded under msert.exe); He set off to search for more than 9 hours, which found nothing/no infected files!

  Finally, for all that, I can not use system restore or reset Firefox! I never pressed ENTER when the message appeared - do you think I should be?

  I know that my version of Windows has expired and I plan to update very soon, but do not want to lose all the vital files. So, I am currently the backup copies.

  All this activity may be connected? Or would it be different things are happening? And also, please could someone perhaps shed light on what happened or if they can help somehow? I would be VERY grateful.

  Thank you very much

  Bruce.

  Since we have not heard from you lately, I will go ahead and tell you how to fix your problem disabled Task Manager (and probably a few other things):

  Basically, when you see these errors, the usual advice is something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor because there is no Group Policy Editor in XP Home and that advice really doesn't tell you where to look in group policy, even if you run the Group Policy Editor (unless it's really good advice).

  Basically, you need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that may have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove (like Task Manager), the malware disables the things you tend to use and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  You can also manually create a system restore point before you make these adjustments.

  Open Notepad (and only Notepad) to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines in BOLD text into the new Notepad file:

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoControlPanel" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose merge or open with... and select the registry editor or import.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test to make sure the changes 'stick '.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, you will see a message like this:

  Registry editing has been disabled by your administrator.

  We must therefore first difficulty (not a problem).

  Click Start, run, and in the type box (or just copy / paste the entire order in the window run more safe) the following text:

  reg delete HKCU/v DisableRegistryTools/f

  Then see if regedit behaves (of course it will be).

• HP Pavilion HPE h8 - 1070t CTO need case fan

  HP Pavilion HPE h8 - 1070t CTO, product number: LP028AV #ABA

  After an error message, on the fan and case fan noise I replaced the AVC DS09225R12MC234 DC 12V case fan 0. 3A with a Startech.com FAN9X25TX3H case fan.

  A program to monitor I have shows an increase in rpm of the system another fan. I'm trying to find out if my new fan is correct or adequate propper case fan.

  Hi checkit, as long that all fans are working and they doesn't make unusual noises or work allways on the maximum RPM is fine, Adi.