Upcoming USB does not screen n

Similar Questions

• USB does not not on my HP DM4-1265DX

  Recently, I had my motherboard replaced by Geek Squad to the laptop and now my USB does not work

  The two 2.0 do not work with any Plug that I put in my 3.0 only works with any type of USB. I tried to uninstall and updated the driver, updating the BIOS, check if the port was clean, reinstall Window (which was a pain waiting), reset the CMOS, reset the default Bios and see that I can't access the menu in Advance on my HP Pavilion dm4 because it doesn't have this option to unlock. Thanks in advance!

  Hello

  You did most of the troubleshooting of your end steps steps only takes a few steps are updated Bios and recovery. If you still have the same problem as you informed that Mottherboard has been replaced you must bring it to the Geek squad and have it checked could be the cause of the motherboard.

• Satellite Pro 460CDX USB does not

  I Sat Pro 460cdx with w2000 but my dose usb does not work. In Device Manager the port appear as unsupported nec pci to usb open host controller.

  And the port is not a driver?

  Any idea?

  Hello

  AFAIK This oldie is supported for the Windows 95 operating system. Have you had the same problem using Windows 95?

• my super USB does not work after last update OS EL Capitan

  my super USB does not work after last update os el capitan

  Hi viral_02,

  The resources below provides a few for the SuperDrive USB troubleshooting steps.  Click on the link to see all the possible symptoms and solutions, including resetting the system management controller.

  Get help with the SuperDrive slot on your Mac computer loading

  If the problem persists, Contact Apple or an provider of services authorized Apple, or make an appointment with an Apple Retail Store additional diagnosis, evaluation, or service.

  Take care

• I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7

  I installed Windows XP on my new computer (with Windows 7 PRO), but my USB does not work on Windows XP. It works fine on Windows 7.

  Hello

  And much more: (XP mode requires professional, Ultimate or Enterprise).
  

  Get all the benefits of Windows 7 and continue to take advantage of your investments and more
  business and productivity programs that require a PC running Windows XP.

  Note: Windows XP Mode requires a download.
  http://www.Microsoft.com/Windows/Windows-7/features/Windows-XP-mode.aspx

  Windows XP mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode is supported through Technet

  TechNet - Forums - Windows 7 virtualization
  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• "USB does not recognize the device.

  After four years of working perfectly, my Acer Aspire with Windows Vista Home Premium has suddenly decided to generate warnings "USB does not recognize devices" for all external references except a network controller Linksys that needs to be changed around the ports to operate and has constant warnings "that works better on a 2.0 port." Advice please, very confusing Norfolk UK.

  See if it helps:

  "USB device not recognized" error keeps popping up and USB devices do not work
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/USB-device-not-recognized-error-keeps-popping-up/6be4581d-8fbd-407F-815E-b475c35ca586

• USB does not fit in the printer

  Have a deskjet 1050a and USB does not fit into the printer.  Help

  Thanks I found one.  Printer downloaded and everything got set up.  (except that it took me 2 days to do it).

• Peripheral USB does not appear in Windows Explorer

  I can't browse the files using my USB. Devices and printers displays the device is correctly installed. But doesn't always show is not on my computer.

  Hello Ahmed,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted device drivers or missing.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check the issue. Please follow these steps:

  a. press Windows + C keys and click on Search.
  b. type Troubleshooting in the search box, click on it in the search results.
  c. click 'show all' and then click 'hardware and devices'.
  d. click on 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Please assign the drive letter to the USB device and check.
  Refer to this article:
  https://TechNet.Microsoft.com/en-us/library/cc753839.aspx?f=255&MSPPError=-2147217396

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Toshiba still 8 Micro USB does not, does not charge

  I have installed Nokia PC Suite on my Toshiba Encore 8 tablet and connected my laptop Nokia C1 via micro-USB on my tablet.

  Since then, my Toshiba still doesn't recognize not the USB port, two usb devices or, more important, for the load.

  My tablet is now only 8% load, and I need to get the USB charge function working again while I have still a few charges left in the tablet to make the necessary changes (drivers, BIOS etc.)

  Can anyone help before my Tablet becomes a brick died without charge to the left?

  Hello

  Looks like we have a similar problem, although I have a different tablet model (AT10-A) and I did not install anything whatsoever... still, I'm having the same issue on the micro-USB port: it does not recognize the Chargers and USB connections with my laptop. To the point where it says 5% battery. I'll try to keep it connected to the charger, even if the Tablet does not seem to see it.

  How can I test if the battery is really in charge?

  Have you received support from Toshiba?

  Thanks and best,
  Luca

• Satellite Pro 4270 - USB does not work

  Hello.

  I had this problem for a while, and I was wondering if anyone had any suggestions to solve this problem.

  I have more or less of work Satellite Pro 4270 (4200 Series) computer laptop with XP on it.

  The USB port does not work. I don't know why it does not work. I tried to replace the USB module on the motherboard that has not worked. I've updated the BIOS to the latest version, has not functioned. Removed and reinstalled the drivers in XP, not worked. I'm out of ideas.

  IrDA works very well.

  Some suggestions please. Thank you

  Hello!

  I understand, were you solder the module USB motherboard and then solder another module?

  I mean, what have you done with the module USB, replacing? Sorry, I don't remember exactly how the USB module is connected to my mobo SP4270 seen last about the half a year ago... If the welding, I don't wonder the problem... but if not, there may be a solution...

  Best regards

  Pete v.

• HP 260 G2: USB does not work with W7 x 64 installation ENT

  I have a new G2 of 260 HP, when I proceed to the installation of W7 x 64 USB business, after th e first loading, USB devices does not work. I tried with the utility of th 'Installer_Creator' from Intel, but with the same result.

  You can someone help me with this issue?

  Thanks in advance

  Mauro Caputo

  Hello:

  You must run this utility...

  https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility

  Your only other option would be to use a PS/2 keyboard and mouse to complete the installation and then install the drivers for Chipset and USB3 you need.

  or see this post for an alternative solution.

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-prodesk-600-G2/m-p/5485092#M11107

• Re: Satellite C660 - One USB does not work

  Hello

  As the title says, I have a c660 that has only a working USB port. The other is dead and has been dead since day 1.

  I tried to uninstall the USB controllers, re-boot and allowing the automatic hardwarediscovery run and install again. This has not solved the problem unfortunately.

  I am running windows 7 by the way.

  Another had a similar problem or has any ideas?

  Thank you

  TFM

  If only a single USB port does not work and if the other is OK then I think it is a dysfunction of the USB port and not related to any software.

  So in this case, I think you should visit the ASP from Toshiba for a verification of the motherboard.
  The USB ports are part of the motherboard and possibly you need new mobo.

• SSD external via USB does not start by default

  Hello Apple community.

  I have a problem with my new external SSD. Given that the base model Mac Mini end of 2014 comes with a disk HARD 5400 RPM drive, I wanted to go to an SSD without having to tear the whole unit. I wanted to exhaust the option 'boot from USB' and I'm having a strange problem. I cloned my Mac to the new drive SSD and slapped in a box set of the speaker. I connected via USB and changed my 'startup disk' to use the external SSD drive. However, it does not start on this unit automatically. When I reboot and discovers the "boot manager" I see the USB being initialized automatically. After disconnection / re - plug the drive in, it appears as a boot option. Once it is initialized, everything works fine and I can boot into El Capitan without any problem using the SSD.

  I am trying to find a way that I can get the Mac to initialize the SSD to the boot upward and choose default. I don't want to have to re - connect the drive whenever I want to start on the SSD drive... Any help and suggestions are greatly appreciated!

  My equipment

  ===========================

  Model Base of Mac Mini (end of 2014)

  1.4 GHz Intel Core i5

  4 GB of DDR3 1600 Mhz

  OS X - El Capitan v 10.11.3

  240 GB SanDisk SSD more - connected via USB3.0

  What unit do you use for the SSD?

  Can you provide a link?

  If the SSD is delivered with a box to provide a link to that,

  How do clone you for the SSD? What app did you use?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable, reinstall the OSX. Nothing shall be lost

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x

• USB does not work on Satellite A110-294

  Hello

  I must first apologize because my English is not perfect, so I'll use simple words.

  A friend has a problem with its ports USB on a Satellite A110-294. I try to solve the problem, but without success until yet.
  I did a fresh install of windows XP with the toshiba installation CD, but it does not solve the problem. Then I try to remove usb devices in system properties, but there is a problem when I try to remove the usb host controller. System freez and nothing works no more! I remove hub root, but it works.

  I try to download some difficulty for usb with SP2 problems, but the prob still here. I saw there are some updates to INF files for some chipset intel but it is impossible to find the update intel celeron chipset. Update the BIOS to 1.70 and no result.

  I try to look for some drivers for the motherboard of toshiba but I can't find anything.

  What can I do to fix this?

  Satellite A110-294 belongs to the series of PSAB6E.

  On the Toshiba site, you won't find a chipset driver because it s built into the display driver for this model (chipset). You don't need a driver chipset Intel, this laptop has an ATI graphics chip and chipset.

  Then try to update the display driver:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• HP Probook G3 450: USB does not work

  I formatted my hard drive and installed windows 7.

  None of the usb drives to work. It is common in the sub player but nothing appears in Windows Explorer, when I plug in a flash drive. When I plug in a mouse, it does not work.

  It is a platform of Skylake has no USB 2.0 driver for Windows 7 does not work. You must install the USB 3.0 driver and probably a lot of other drivers, as well.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7834518 & swItemId = ob_163291_1 & swEnvOid = 4060

  There is a whole page of WIndows 7 supported for this model.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=7834518 & lang = to & CC = US #Z7_3054ICK0KGTE30AQO5O3KA30B3

  Make sure that the drop-down menu to select the operating system is set to Windows 7. I assume that you have installed the 64 bit version.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.