UPDATE ~ 1.EXE has stopped working

Similar Questions

• By updating the Garmin GPS, I get the error "Bootstrapper.exe has stopped working".

  Bootstrapper.exe has stopped working!

  Hello!  I try to update my Garmin GPS and have saved the program on my desktop.  When I open it, the program retrieves and then I get the message: "Bootstrapper.exe has stopped working".

  I searched the internet and forums of Microsoft for answers, but I don't know why this is happening.  I followed an instruction in the forum by changing the setting of the DEP to just windows and programs and do not apply to ALL.  I restarted my computer and I tried to rerun the Garmin update.  I got the message again.  Y at - it somewhere on Microsoft where you can download just the ' Bootstrapper.exe by itself?

  All the updates of Windows and Microsoft are up to date.  I am running Windows Vista Home Premium, 32 bit, pack svc 1 & 2.  Could someone help me please?  I'm pretty knowledgeable with computers, but it frustrated me no end.

  Thanking you in advance,

  stillcrazyat49

  Hello
  
  1. have you made changes to the computer recently?
  2. the program is already running while update you?
  3. where did you download this update?
   
   
  Method 1.
  I ask you to re - download the update and then try to install it. Its possible this bootstrapper is damaged. If the problem persists, then put the computer in a clean boot state, and then try to update.
  May be a third party application is causing the conflict.
  
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
  
  Method 2.
  If the problem persists, it is recommended to contact Garmin support and check.
  http://www.Garmin.com/Garmin/CMS/site/us/support/
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot run Lenovo System Update error tvsu.exe has stopped working

  Original title: tvsu.exe has stopped working

  When I run it on my WIn7 64 bit notebook Lenovo System Update v4, I get the following:

  TVSU Application has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I called Lenovo and they say it's a Windows problem. This message looks like a standard message for a particular type of problem. Ideas for a solution?
  Thank you

  Thanks, Eddie!

  I've been reluctant to use these registry cleaners too but had no choice. They well with basic cleaning after uninstall. It is heartbreaking how reckless SSII is during the cleaning of the registry during the uninstallation of their software. And some of the best cleansers will warn you if a fix is dangerous or not you can not run it. But what sometimes happens is that vacuuming can cause two problems for everyone that it fixes if you aren't careful.

  I'll try to post on the site you posted. I'll post here if it helps.

• Satellite Pro U400 - TrueSuite Manager setup.exe has stopped working

  I have a Satellite Pro U400 running Vista Business (OEM) and at the start of a desktop computer TrueSuite Manager pop-up message appears telling me there is an update to install.

  When I try to install the update, I get a window that says Setup.exe does not work.

  Signature of the problem of the relationship an APPCRASH-is30C0.exe with the exception C0000005 code.

  I tried to uninstall the TrueSuite Manager through Windows uninstaller programs, but get the same message - setup.exe has stopped working.

  Appreciate advice on how to solve this problem.

  Hello

  I think that it is a simple case of corrupted registry entries and files that could belong to the TrueSuite Manager software.

  I agree with the previous user, and I recommend to reinstall this software again.
  You may need to clean the OS before installing the Truesuite again.
  In this case, I recommend the CCLenaer. It s a simple and free tool and can be downloaded on most Web sites.

  Google and you should find more information.

  See you soon
  Jayjay

• ATKEX_cmd.exe has stopped working

  

  

  Hi all

  I'm struggling with this problem ATEX for awhile now and still not found a solution myself.

  I hope someone knows the answer to solve.

  whenever I have start my pc I get the same error "ATKEX_cmd.exe has stopped working" around 5 times in a row!

  You can see a printscreen of it added to this post!

  I had personally never heard of ATEX so much, I searched on the web

  and did not even find why I need exactly.

  In any case, I came to know that it is in a part of my registry so it's like all the other parties 'binary codes.

  and it would probably be affected by malware because I never changed anything in my regedit on this pc so far.

  So I did a SFC scan and I did a few malware scans and scanned and fixed my registry with some of the best free products (like ccleaner and so on)

  There is no malware detected and the registry got some repairs (as always) and some of the binary codes that had to be quarantined or deleted had to do with ATKEX!

  but the same problem still occurring...

  I'm not able to find the ATKEX_cmd.exe but I found the folder named 1.01.02 under "C:\Program Files (x86)\ASUS\AXSP\1.01.02' witch contains 3 files named:"ATKEX.dll","atkexComSvc"and"PEbiosinterface32.dll"so as you can see the DLL is still on my pc)"

  You can also see the printscreen of it in my post

  I also ran into problems when I tried to update the BIOS of my motherboard asus maximus vii ranger, because apperently I need to rename the cap file before updating, I feel that this could be the cause, but I'm not sure what I should do now

  I'd appreciate if someone could help me!

  Thank you very much!

  Maxim

  Hello

  It seems to be linked to the Realtek drivers - are you game?

  http://Rog.ASUS.com/Forum/showthread.php?47776-problem-with-Realtek-HD-Manager-load

  http://Rog.ASUS.com/Forum/showthread.php?48938-Mei-drivers

  Edit:

  ASUS computer

  atkexcomsvc.exe runs as a service in Windows (asComSvc) from the bottom. This service runs under the SYSTEM account with extensive privileges on the local computer and acts as the computer on the network.

  http://www.boostbyreason.com/resource-SHA1-561eedde165abd24e6d170799332b78c162c19d5-atkexcomsvc-exe.aspx

  It is loaded by atkexcomsvc.exe on Asus computers

• I received error messages saying that hl2.exe has stopped working.

  HL2.exe has stopped working?

  original title: hl2.exe has stopped working

  Hi 1patrick1!

  Thanks for posting your question.  Here is some important information about the hl2.exe that can help.

  HL2. EXE has stopped working the issue

  Game error: HL2. EXE has stopped working

  Important:

  Please read the FAQ in the link below to determine if your question should be directed to the developer of the game or to the Steam support:

  Third-party game support

  General troubleshooting

  Game crashes can have several different causes depending on your system. The best way to determine that the problem is caused by East follow this guide first:

  Troubleshooting game crashes

  Windows Vista users

  There are several patches available for Vista users and Vista users with Nvidia cards. We recommend that you follow the Guide Windows Vista in its entirety.

  Anti-virus software

  Some software anti-virus and anti-spyware such as Norton/Symantec, AVG 7.5, Avast, Spyware Doctor and Nod32 have been confirmed to cause the game crashes with Source engine games. If disabling your antivirus software or security is not enough, you can consider completely uninstalling these applications until an update is published by the developers of antivirus software that resolves these compatibility issues. More information found in the section troubleshooting game crashes FAQ linked above.

  Background applications

  Graphically intense games such as half-life 2: Episode Two and Team Fortress 2 require a lot of your system resources to operate. Having background applications being run while you play can often result in the game engine competing for resources with other applications system. Often, this can cause the game to crash because it is not free enough for the game to use system resources. Please follow the guide below for more information:

  Disabling background Applications

  It is also important to ensure that your system has enough available expanded memory. Please follow this guide for more information.

  Hope it will be informative for you.

  The respect of

  Anurag Shukla
  Microsoft Certified Professional

• Error message "HPSF.exe has stopped working" whenever I have open hp support assistant HP g6

  I have thought honastly this laptop couldn't be worse. I downloaded the latest version of the hp support assistant after resinstalling windows and all the other stuff of hp and when I try to get updates from hp it comes up with a

  error message saying "HPSF.exe has stopped working" from there he returns constantly with Deputy of support every time error begins.

  Windows 7 64 bit

  Please try to uninstall, download of the last being and resettlement.

  Here is the link to the latest version of HP Support Assistant:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58915.exe

  Here is the link to the latest version of the HP Software Framework:

  http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59202.exe

  So here's a support document which guides you step by step: http://support.hp.com/us-en/document/c02435801

• applephotostreams.exe has stopped working error message

  I get the following error message every time that I reboot - it started after MS Update on 23/08/2012:

  IN MICROSOFT WINDOWS BOX:

  applephotostreams.exe has stopped working error message - a problem caused blocking the program works correctly. Windows will close the program and notify yu if a solution is available

  This is a link to the solution I found that worked for me...

  applephotostreams stops working

• GfxUI.exe has stopped working after rebooting the computer.

  Original title: error GfxUI.exe

  I've been running Vista business for a few years.  Last week, after the reboot, I get an error message that GfxUI.exe has stopped working.  After that I closed the error box, the PC works fine.  I updated the graphic driver Intel, but always the message.  Why now I get the message and how can I solve this problem?

  Hi Kea2300,

  Did you the latest changes on the system?

  This error message indicates to the Intel graphics driver.

  Because you tried to update the Intel graphics card, you can try to perform a clean boot and check if the problem persists.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  Hope this information is useful.

• kdbsync.exe has stopped working - win 7 64 bit

  I am running Win 7 64 bit on an HP Pafilion HPE h8 - 1360t.  After last week round of updates my computer can't play mp4 files, the Media Center will come is no longer (Message: "Windows Media Player has stopped working"), You Tube files will no longer play, the Web of magic HP also would not come to the top, and the mysterious "kdbsync.exe has stopped working" message when I reboot.

  After hours of reading the forums, I found that it seems to be related to the AMD graphics card update.  My computer has an AMD Radeon HD card 7570.

  On the AMD website it is listed as a legacy for XP computers adapter.  I don't know why HP installed in a computer running Windows 7 64 bit with an Intel Core I7 CPU.  It does give me confidence in HP equipment.

  The AMD utility correctly detected my card and told me that I needed a driver called:

  14-4-Win7-WIN8.1-64-DD-CCC-WHQL.exe

  But when I clicked the Down load button, I received the message, "could not conntect to the server.  Could not parse error. »

  I have not found such a driver on your Web site.

  How can I get my Media Center works again?

  The idea of turning off all non-Microsoft services, scares me to death that I now have my computer how I want it.

  I've also posted on the forums of AMD that I concluded that their Board of Directors has been offending material element:

  http://forums.AMD.com/game/messageview.cfm?CATID=454&ThreadId=173935&forumid=11 you can read my response to the agent who helped me.

  Basically, I had to uninstall all the drivers AMD and sotware using functions of control panel of configuration/programs & and then run the clean uninstall AMD program: http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx

  Then install the drivers from here:

  http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+64#AMD-catalyst-packages

  I do not recommend installing this set of drivers unless you are SURE that they are correct for your hardware.  I could not use steps 1-5 on the AMD site because the last necessary step you choose the operating system that your equipment is running.  The HP installed in my computer 'last and best' video card a year ago was so old that the operating system that is only offered to step 5 have been XP and Vista!  Be aware that HP uses inherited in its latest PC hardware.

• "HPSF.exe has stopped working. This application has encountered a serious problem and needs to close. »

  I get the above error message on an old Pavilion HP desktop computer for a month (p6813w) running Win7.

  I see there are updates, but when I click on the HP Support Assistant w / 'recommended action '...

  He said HPSF.exe has stopped working and I need to click 'OK' to automatically restart the application.

  I click 'OK' and the window closes and does not restart.

  ALSO: it is said now, "HP Support Assistant can be run by a user at a time.

  Please go to the user who is currently using HP Support Assistant. Etc.»

  Anyone in the world can say that ?

  Thanks for aloud up-to-date solutions or you help can provide.

  Go to Control Panel, programs & Features.Select HP Support Assistant and uninstall it. Restart your computer after its withdrawal.

  Then, download the latest version for your machine from the link:

  http://h71036.WWW7.HP.com/HHO/us/en/pclc/articles/HP-support-Assistant.html?JumpID=ex_r602_go/hpsupportassistant

• "MessagingApp.exe has stopped working" error when I turn on the computer.

  In the last few days I have been making a "MessagingApp.exe has stopped working" message every time I spend on the laptop. When I go to "All programs" all windows and Yahoo programs are red in color. I did a search for "MessagingApp.exe" but it is not found, but when I looked in 'Program Files'-'alternative E-mail' I found it but it will not run. I can't connect to Yahoo Messenger.Can help you? I have Windows Vista Home Edition thank you, McEvor

  original title: error MessagingApp.exe

  Hello McEvor,

  1. don't you make changes to the system before the show?

  2. Since when have you been faced with this problem?

  Try the following steps to try to get the fixed number.

  Step 1:

  Try to put the computer in a clean boot state to see if the same message appears

  A clean boot helps eliminate software conflicts. Visit the link below to learn how to perform a clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Once the troubleshooting is over; reset the computer to start as usual in following step 7 from the link above.

  Step 2:
  An analysis of security and verification for infections.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  1. you can run a virus scan online from the link given below and check if the problem persists.

  Microsoft safety scanner

  2. in addition, make sure that you have installed on your computer, antivirus software was last updated so that it works correctly.

  If the problem persists, please contact support messenger yahoo from the link below for more support.

  http://help.Yahoo.com/l/us/Yahoo/helpcentral/

  Hope the helps of information provided.

• LifeCam Cinema - LifeCam.exe has stopped working

  Just got a new webcam MS LifeCam Cinema that I ordered, but unfortunately, the software crashes.  The question is not the device itself, because I can see the video in the video settings Live Messenger window, and the test microphone also works.  However, whenever I try to run the software LifeCam itself, I get the pointer for a second, and then it crashes and I get the message "LifeCam.exe has stopped working".

  I am running Vista Home Premium SP2 x 64, completely up to date with windows update.  I uninstalled the driver from the CD and it redownloaded go web site (did not work).  I checked all the posts on what I could find, the most common suggestion was to uninstall the Nero software, but I don't have any Nero software installed.  Any help to get this thing to run would be really appreciated.  I want to especially this for video recording, to get the LifeCam program to work is essential.

  How many other USB devices attached to this machine?  Are you using non-powered for connection hubs?  I assume that you have already tried to connect to a different USB port on your computer?  Rear ports are better than using all the front ports on most machines (due to wiring and connections, I think).  If you change the Windows ports will really rediscover your hardware and quickly (without downloading) reinstall drivers current.

  Microsoft hardware
  http://www.Microsoft.com/hardware/download/DownloadResult.aspx?category=ice&type=LifeCam&name=H5D-00001&OS=WVista_3264&lang=en

  Here is the software available for your product. Follow the link to download.
  "The LifeCam 3.2 32-bit and 64-bit for Windows Vista

  "See the Readme of the LifeCam software

  "Download the update of Firmware for your LifeCam Cinema

  Something useful in the Readme, and did you also update the Firmware?

  For what it's worth, it's only about a week ago when I was offered and downloaded updates via Windows updates for my LifeCam camera.  That always seems to work correctly.

• In Vista, error "FINDFAST. EXE has stopped working and needs to close. "

  I get continually comes a msg as FINDFAST. EXE has stopped working and needs to close. What is this reference to? Liu

  Hi LaurieHead,
   
  -When exactly you receive this error message? It is to start the computer or when starting any application?
   
  We will put the computer in a clean boot state to identify the application at the origin of this problem:
   

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• 34957172.exe has stopped working and was closed. Windows error message

  Since the installation of Service Pack 2 for Vista, I receive the following error message that causes my computer to freeze - "34957172.exe has stopped working and was closed.  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. "How can I solve this problem

  Hi SherriTeille,

  (1) what is you receive the exact error message?

  (2) when exactly you get the error message?

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link