Update and download sp2 - Windows Service does not work

Similar Questions

• Installation of Windows service does not work after Windows Explorer 9 uninstalling and reinstall Explorer 8

  Installation of Windows service does not work after Explorer 9 uninstallation and reinstallation of 8.  I followed several suggestions on this forum, but still no luck.  I ran the SFC system twice, who told me he had corrupted files.  "Some have been repaired and some might not be."  I then went in the event viewer after a start to the top and he stated that the 'Adobe APM service' is not found.  Also the "hpqddsvc' and the 'gupdate' is not found.  He tries to install something every time I start, but he abandoned.  I checked whether the system is on and disabled.  It's on.  There are a lot of small problems, but my main concern is the Adobe program.  I tried uninstalling and reinstalling Adobe, but still get an error message that the Windows Installer Service could not be accessed. Other suggestions?

  Hello

  I suggest you follow the link and check.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

• No wireless networks not found on laptop - the WiFi windows service does not work on this computer

  Hello

  I have a laptop model Toshiba P205-56347 running Vista home premium and a lynksis WRT54G V8 router model.  The WLAN light is solid and the internet light flashes on the Linksys.  I have Comcast cable as my ISP.

  I've seen reported similar problems.  All of a sudden my wirless acess stopped working, some networks are displayed and I get the message 'windows wireless service does not work on the computer.  I am not able to restart the windows wireless.  I can't connect to the internet on the laptop.  I have a DELL PC and can access the internet here if necessary.

  In the network and Discovery Center, I see that network discovery is disabled.  I can't set it to on.

  Under system devices, I have the following network cards: Intel (r) Wireless WiFi Link 4965AGN and Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS6.0).

  Help, please.  I'd appreciate any help.  I need a good starting point for resolution and wouldn't start using suggestions that corrects other issues.  I design financial systems and purchase online, but I'm not a technical person with regard to updates Vista, drivers, etc..

  Thank you! After reviewing the responses to similar problems, can anyone suggest if I should try one of the following values: 1. run SCF/scannow at the command prompt I don't know what that's going to fix it and do not want to make the current problem worse. 2. download the driver for the network drivers. If you would be grateful if someone could help me find the driver and download it. 3 reinstall Windows Vista Home Premium SP1 since the restoration of Toshiba CD I would appreciate greatly any information. Donna

  Hi blondswede,

  You can try running sfc/scannow to see if you have corrupted files. That won't be a further problem on your pc. After that, you want to make sure you have the latest drivers for your laptop, especially drivers of the NIC (network card). Go to the following link to Toshiba for your model and download those:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=1757721&RPN=PSPB3U&modelFilter=P205-S6347&selCategory=3&selFamily=1073768663

  If you're still having problems, and it has recently emerged as a problem, you can try to restore your system to a point in time before the problem started to use the system restore. Here are the steps to follow:

  • 1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    2. In the System Restore dialog box, click on choose a different restore point and then click Next.
    3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
    4. Click Finish.

    The System Restore tool

    If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    To restore the operating system to an earlier point in time, follow these steps:

    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know how it works and if you need additional assistance.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• [Error number: 0x8DDD0018] _ the site cannot continue because one or more of these Windows services does not work:...

  I tried to fix the automatic updates via the following Web sites to ensure that the BITS and the automatic updates function.

  http://support.Microsoft.com/kb/910337

  http://support.Microsoft.com/kb/883614

  The only problem is the history of the update, hidden restore updates, and change the settings appear dimmed.  Please don't tell me not to:
  To ensure that these services are running:
  1. click on start and then click Run.
  2. type services.msc, then click OK.
  3. in the list of services, double-click on automatic updates, and then click Properties.
  4. in the startup type list, select automatic and click on apply.
  5. Verify that the service status is started, if the service status is stopped, click the Start button.
  6. in the list of services, double-click on Background Intelligent Transfer Service (BITS), and then click Properties.
  7. in the startup type list, select manual and click on apply.
  8. check that the service status is started, if the service status is stopped, click the Start button.
  9. in the list of services, double-click the event log and then click Properties.
  10. in the startup type list, select automatic and click on apply.
  11. check that the service status is started, if the service status is stopped, click the Start button.

  I did it!

  Thank you
  gdv925

  Norton Utilities has a section "Manage your Services" where I chose a minimum on commissioning.  I 'restored' Services '' recommended '' and all is good.

• I downloaded the latest update and now my internet explore does not work as it did before. I use a laptop with windows 7 ultimate with 32 bits.

  Windows 7 ultimate 32 bit

  There is no connection between Firefox and Internet Explorer from Windows.
  What exactly is the problem you are having?

  Perform a file system check to repair the corrupted system files
  Win 7, 8, 10, Vista: https://support.microsoft.com/en-us/kb/929833

• Why Windows Update service does not work on my computer?

  After a few months of not be used, my Toshiba Satellite L35 (Windows Vista Home Basic; Computer laptop Service Pack 2) can not access Microsoft Updates.  Whenever I try, I get a message "the service is not running" and tells me to restart, I did several times without success.  Norton 360, and Spybot, indicates no problems.

  It's like something has removed or disconnected from all the Windows Update process.  "Update history" produces a blank page.

  After a few months of not be used, my Toshiba Satellite L35 (Windows Vista Home Basic; Computer laptop Service Pack 2) can not access Microsoft Updates.  Whenever I try, I get a message "the service is not running" and tells me to restart, I did several times without success.  Norton 360, and Spybot, indicates no problems.

  It's like something has removed or disconnected from all the Windows Update process.  "Update history" produces a blank page.

  Suggestion 1: Get rid of Norton and Spybot Search and Destroy.  I do not recommend Norton/McAfee products, especially the suites (I recommend NO suites - simple is better.)  Spybot has been a good product, but a few years back, he just stopped doing as well.

  Suggestion 2 (cumulative, not necessarily independent - but maybe): cleaning of your Windows Update stuff...

  All the following items in the order shown - no matter what protection against that, you think you have.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Try to get updates.

  If it still does not work, try this...

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     
     net stop wuauserv
     CD %SystemRoot%\System32
     Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     net start wuauserv

  3. Reset
  4. Try to reinstall updates

  * Important * When you do this, the following problems occur:

  • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
  • When you remove the Software Distribution folder, your download history is deleted.
  • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  
  * Note * if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.

  STILL no?

  Use this FixIt:
  How to get the latest version of the Windows Update Agent

  Reset.

  Save components WU:

  1. Start an elevated command prompt.
  2. Run the following commands pressing on enter after each line:
     regsvr32 Jscript.dll
     regsvr32 c:\windows\system32\wuapi.dll
  
  regsvr32 c:\windows\system32\wuaueng.dll

  Reset.

  Try updates.

  If it still does not work after this - say parts of the former post once again (no need to conduct a new analysis of malware) from:

  "Now reset your Windows with this FixIt components update:

  ... but stopping at... «STILL no?'.»»

  Back - let everyone know what is happening.

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• Windows 10 does not work on my PC, and Windows 7 would not be updated

  I downloaded the Windows 10 Upgrade Wizard for free. However, whenever I run it, the error message appears saying "Windows 10 does not work on this PC", because "the display is not compatible with Windows 10. Check with the manufacturer for support.

  So, I contact the manufacturer of the display. Verified support Office my PC online and found the optional Windows updates 10 have not been installed. I tried to run the update, but the update of Windows crashes to download updates. I also ran a convenience store, but the resolution of the problems also got stuck.

  I would start by reinstalling the video driver

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Error: The Windows wireless service does not work on this machine and is called autoconfiguration WLAN service.

  Original title: I do not see my available networks

  I get this message when I try to solve the problem: Windows wireless service does not work on this machine and is called autoconfiguration WLAN service. Does not start Windows wireless service failed questions available detection area 5 Windows wireless service does not work on this computer only set not Windows wireless services is also called the autoconfiguration WLAN service.  Network Diagnostics log file name: 5894B3A3-5541-48-A8FE-7A7E2E8E3B10. Detection of Repair.Admin.0.etl detail information name of the computer Collection: RODRIC29 - PC Windows Version: 6.1 Architecture: amd64 time: Thursday, August 23, 2012 12:27:11 Publisher details Windows Network Diagnostics detects problems with network connectivity.  Package version: 1.0 Editor: Microsoft Windows can help anyone? (Windows 7 Inspiron computer laptop)

  Hello

  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have security software installed on the computer? If Yes, is it updated regularly?

  3. have you done any software or hardware changes on your computer before this problem?

  4. What are the troubleshooting steps you have tried to solve the problem?

  Refer to these methods.

  
  Method 1:

  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service.

  (a) click Start, type Services.msc and press enter.

  (b) locate the autoconfiguration WLAN service, double-click to open its Properties window.

  (c) on the general tab, change the Startup type to Automatic and click on the Start button.

  (d) click apply and then click ok.

  (e) try to connect to the wireless connection and check the result.

  See also:

  For more information on the wireless settings, see this link:

  http://TechNet.Microsoft.com/en-us/library/ff802404.aspx

  Method 2:

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check if it helps.

• Satellite 5000 with Windows XP, Service Pack 1 is installed and now my sound card does not work

  Everyone knows this problem.

  I have a 5000 Satellite with Windows XP. I installed SP1 and now my sound card does not work.

  Any ideas out there?

  Does anyone have this problem?

  I reinstalled the Yamaha drive a couple of times and always the same: no sound?

  I bought this unit in Holland and it was great until the problem of Service Pack. I heard that Comcom was a dealer right here. Maybe I'll have to make to them, if I can't help here?

• "The Windows update service does not work. Please restart your computer.

  If I click on "Check for Updates", a dialog box appears:

  "The Windows update service does not work. Please restart your computer.

  I rebooted several times, but the same error.
  Help, please.
  Thanks in advance.

  This site will help you get the update of Windows running service

  http://pcsupport.about.com/od/Windows-8/a/Windows-Update-settings-Windows-8.htm

• Update of Windows XP does not work, error 0 x 80245003. Cannot be updated to SP 3, can't update IE 6 to IE 8. How to solve these problems?

  Update of Windows XP does not work. I tried the correction of the error 0 x 80245003 and nothing has changed. Fix, that it won't work because SP 3 is not installed, because of the Windows Update does not. I try to install SP 3 manually, then downloader windows will not install reference SP 2 must be installed. SP 2 is installed. So I tried several ways to solve this problem, and I keep running into roadblocks of Windows. Help, please.

  Hi my NameJoel,

  See the methods mentioned below and check if that helps.
   
  Method 1:
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then the firewalleither blocks information or allows information to pass to your computer. If the information is blocked or throughdepends spent on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.
   
  See also:
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
  Note: Disable your antivirus software is not usually recommended, some software antivirus prevents certain system changing files. This can cause the Windows XP SP3 installation failure. To make sure that you manage to install Windows XP SP3, temporarily disable your antivirus software, including any third-party antispyware and firewall program. To do this, right-click on the icon for your antivirus program, and then click on disable. The antivirus program icon typically appears in the bottom right corner of the computer screen.
   
  Important: Make sure that you enable the antivirus software after you install Windows XP SP3.
   
  Hope this information helps.

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• updates installed live mail and now the spell checker does not work

  updates installed live mail and now the spell checker does not work

  You will find support for Windows Live Mail in this forum: http://windowslivehelp.com/forums.aspx?forumid=b91657c9-9031-4406-a398-7d0783119bb7

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Get the error the Service does not work when you try to update

  Original title: Dell Inspiron 1545 model

  My Labtop wife; the automatic update is enabled; but will NOT be updated. When I try to update; There are NO error codes. After trying to update. The computer

  addresses by specifying THE SERVICE IS DO NOT running. You must restart; also the F8 key does not work.

  Hello

  1. What is the error message right on the service does not work?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check.

  The problems with the installation of updates (Windows Vista)

  Hope this information helps.