Update BIOS on Satellite A300 with Vista 64-bit

How can I update the Bios on a Satellite A300 with Vista 64 bit.

There is only one available 32-bit update utility.

So don t update the BIOS if the compatible version is not available.
BIOS for Vista 32-bit is not compatible with Vista 64-bit!

See you soon

Tags: Toshiba

Similar Questions

  • Cannot update Bios for Satellite U400 - 134 Vista 64-bit

    When I try to update Bios 3.50 courses it is said that I couldn't have an administrator rights, but I run it under administarator.

    Who knows about this problem?

    Post edited by: Gerus

    Hello!

    Satellite U400 BIOS 2.0.17.64?
    As far as I know the latest version of the BIOS for Satellite U400-134, which belongs to the PSU40E series is the version 3.50.
    Check again on the Toshiba site: http://eu.computers.toshiba-europe.com

    If you download the zip file, you should extract all files before you start the update.

    Good bye

  • Satellite A300 with Vista 32 bit stops and restarts rendomly

    Hello

    PC randomly just resart, no interval.
    I've restored the PC to original factory of the partition.
    I have installed new bios (1.8), was 1.3.
    I tried a lot of suggestion of internet post but not luck.
    All microsoft updates are applied.

    Wat I noticed is that if I boot in ' Standalone or Sandalone with internet: PROBLEM STOPS. "

    Any help appreciated,

    Kind regards

    Eric Eric

    Hello

    May I ask if you have noticed a high temperature, while the laptop stops automatically?
    Usually, the high temperature is the main reason for this unexpected closure of the bottom.

    The high temperature may appear if the cooling module does not work correctly because of the dust or debris inside the fans.
    Cleaning if this can be useful.

    I clean my fans from time to time with the help of compressed air jet and it's good enough to clean the fans

  • Problem with Satellite A300 and Vista 64 bit

    I just bought a Toshiba Satellite A300-1CO model: PSAJ4E-03R015PT, which came with an impressive 4 GB of ram device.
    I knew with Vista 32-bit, only 3 GB would be available, but since I got a license of Vista 64 bit I care, came home and installed it.
    When I looked up the drivers on the toshiba site, no drivers for Vista 64 bit drivers were available!
    I have now 4 GB or RAM available and I also have problems with face recognition software, microfone, sound card, card reader and a few other things.

    I searched the websites manufactors drivers and I managed to get some of these things barely usable, I don't think that it is a SD solution.
    Other laptop brands are made available long drivers for vista 64 bit some of them even for XP 64 bit!

    I would like to know how long take to Toshiba do official drivers available for vista 64 bit on their Web site.

    Best regards, Pedro P.

    I was looking for 64-bit drivers for my laptop, but since this is a new model, the drivers were not yet available. I checked a few weeks later and they were no longer available.

    Just wait awhile, they should be available soon.

  • Updating BIOS for Satellite A300/600

    Hi all

    I have a Satellite A300/600 (PSAG4A - 02600M), that I just installed W7 x 64 on (I did a clean install). I am upgrading the drivers according to the Web from Toshiba website. I noticed there is an upgrade of the BIOS to version 1.8 - I am running version 1.5.

    I downloaded the update, but when I try to launch it I get the following message: "C:\Users\HELIF~1\AppData\Local\Temp\isc6632tmp\\i nsydeflash.exe could not be executed."

    The PC is running fine at the moment, no major flaws - V1.8 do I need? If so, how do I correct this situation?

    Other flaws in the process of upgrading for me so far have been:

    Whenever I pressed the button mute W7 UAC has popped up to ask me if I wanted to allow the program to Toshiba setting system. Corrected this problem by moving the file ButtonSetting.ini and by editing the registry.

    Support Windows Live Photo Gallery. When I inserted my card from my camera, W7 XD he recognized very well, but WLPG could not see. That's why I cannot import my pictures off the card. Well, I can do through W7 but WLPG gives you options to fine-tune the importation of the process which is what I'm after. Tried to uninstall/reinstall WLPG after I had installed all the drivers from Toshiba, but it still does not recognize. One more question.

    Finally, regarding WLPG, I can't download Image Composite Editor, everytime I try the link to the download (ftp or html), Firefox just displays a blank page with "waiting for research.microsoft.com. Try to find another site to download it off the coast but no luck so far.

    That's all so far, any help would be appreciated.

    Post edited by: helifella - added another question...

    No you don't need it. If your laptop works well don't change anything.
    I can't say for sure, but maybe this update of the BIOS works under 32 bit OS only.

    I have European Satellite A300 and I still have the original BIOS although I use Win7 and last orders for it.
    My advice to you is: do not touch the well-executed system.

    Unfortunately with WLPG I can't help you much. It's Microsoft.

  • Update BIOS on Satellite A300

    I want to update the version of the Bios for laptop Toshiba satellite A300 PSAGCE-09800WCE
    Current Version 1.90 and 2.20 version is available
    I just installed Ubuntu LTS OS 14.04
    Is it possible to upgrade the BIOS to version 2.20?

    Message was edited: assignment has been translated

    Hello

    Toshiba offers updates BIOS to WIN. This means that the BIOS update can be done under Windows operating system only. You can't do this if you use Linux.

    Is there a reason to update BIOS? I mean, if everything is OK you must not update BIOS to the latest version.

  • Update BIOS on Satellite A300 disabled the touchpad in WinXP

    Hey

    I just installed XP on my A300, the installation went well, until I updated the BIOS to to 1.7. After that, the touchpad is irrespeonsive, which means that it is displayed in the Device Manager, but does not.

    I tried the Fn + F9 key and after a long driver Hunt, I decided to re - install Windows XP, to locate where the problem was.

    I also tried resetting the BIOS by default, but once again, without a bit of luck.

    The touchpad still does not work.

    Is there a possibility to downgrade the BIOS?

    Hello Johan

    Can you please tell me what Satellite A300 you exactly (A300-xxx)?
    What model is your laptop?
    Almost all cell phones of the A300 are WXP supported and I can not imagine that the update of the BIOS can kill touchpad. It's very strange.

  • Satellite A300 and Vista 64-bit - unknown and non-functional devices

    I have the Satellite A300-1Gn
    Here are some features:

    Technology
    type: technology Intel® Centrino® 2 processor with processor Intel® Core 2 Duo P8400, clock speed of the Intel® PM45 Express and Intel® WiFi Link 5100 chipset: 2.26 GHzFront Side Bus: 1066 MHz2nd level cache: 3 MB

    Operating system
    GenuineWindows Vista® Home Premium 32 - bit Edition (pre-installed, Toshiba-HDD recovery)



    System memory
    standard: 3 072 (2 048 + 1 024) MB
    maximum extension: 8 192 MBtechnology: DDR2 RAM (800 MHz)

    Hard drive
    capacity: 320 GB
    Certification: S.M.A.R.T. disc rotation: 5 400 rpm

    DVD Super Multi (Double Layer) drive
    Compatibility: CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD + R, DVD + R (DL), a DVD-R (DL), DVD - RW, DVD + RW, DVD-RAM
    Maximum speed: read: 24 x CD-ROM, 8 x DVD-ROM / write: 24 x CD - R, 4 x
    CD - RW, 10 x CD - RW, 16 x CD - RW, DVD-R 8 x, 6 x DVD-R (Double Layer), the HS
    6 x DVD - RW, 8 x DVD + R, DVD + R 6 x (dual layer), 8 x 5 x DVD-RAM, DVD + RW
    type: DVD Super Multi (Double Layer) drive

    Display
    "size: 15.4"
    type: Toshiba TruBrite® WXGA + TFT high brightness display resolution internal: 1 400 x 900

    Graphic adapter
    Manufacturer: ATI
    type: ATI Mobility Radeon™ HD 3650 supporting HyperMemory™ technology memory amount: 512 MB dedicated VRAM (up to a total of 2 302 MB available)
    graphics memory using HyperMemory™ with 4 GB of system memory technology)
    memory type: GDDR2 video (500 MHz) bus RAM (resp. RAM video and system memory combined) connected: 16 x PCI Express...

    I installed windows vista 64-bit to try it, and I started to download all the drivers I could find from Toshiba site... But I still have in my device under 'other devices' management 3xbase system of the device (who report that they do not work) and an unknown device "it works ok same woithout this, but my HD movies are restless...
    Is it posible to thath I missed something... Bluetooth, wireless, sound, games, camera, mic, etc., everything works...

    Thanks in advance guys (or girls);...

    Hello

    Have you installed the right graphics card driver?
    The Sat A300-1GN belongs to the PSAGCE series.
    I checked the page of the Toshiba driver and there are two pilots;
    I think that you should choose the ATI driver 8.477 display because this driver supports the Mobility Radeon HD 34xx/36xx chips.

    Other base system devices could be Bridge Media slot (for SD cards), touchpad, HDMI Control Manager.

    I didn't find these drivers 64-bit on Toshiba page. Maybe you should choose some drivers for Vista 32 bit

  • Updating BIOS for Satellite 1625CDT with XP Pro

    OK, I bought a new 256 MB of ram, when tried install it requested update of the bios. I find the update of the correct bios for her. When I try to update the bios, it is said that it can be run in 98 and 2000, I have xp pro. I also tried to start exploitation f12, it did nothing but initialize and beep at me a lot.

    How can I update the bios without having to install a new os (especially when i cannot reinstall pro because of no installation disc or recovery)

    Help, please

    Hello

    I checked the page of the Toshiba driver and there is a single place BIOS:
    This is version 1.11 of the 18/11/02.
    Have you verified that the BIOS Toshiba upgrade document?
    Please check. You will find this under the FAQ section on the support page.
    You will find the proper procedure the update of the BIOS.
    As far as I know, is a procedure to upgrade the BIOS 6.

    But I don't know if the upgrade of the BIOS allows you to use a memory of 256 MB.
    I found some information that this device can handle only modules memory 32 MB, 64 MB, 128 MB and max 160 MB memory.
    In this case you cannot use the module memory 256 MB

  • Re: Satellite A300 - Windows Vista cling - what can I do?

    I have a laptop Toshiba Satellite A300 with operating system Windows Vista Home Edition.
    After a few weeks of work with my laptop, it cling.
    I reinstalled the OS but and it works fine for 1 or two months, then the laptop to hang again.
    October 2008, I bought this laptop and I reinstalled Vista 3 o 4 times.

    What can I do?

    You mean that Vista does not answer after some time?
    Well my friend, this may be a software problem.

    I mean there is no quick fix for these issues, I assume that you have installed and used many different applications on this laptop.
    It is possible that one of the applications is causing this problem
    It would be also possible that entries in registry and system files have been changed during Microsoft updates

    In my opinion, you must use some cleaning as for example the CCLeaner tools.
    It s free and it cleans your registry and other files

    You should also check the applications that are running while the system would begin to cling
    Finally and above all I recommend you memory, you can run a memory test (www.memtest.org, www.memtest86.com) in order to find some problems of memory.

    Good luck

  • Satellite A300 PSAG0A: Vista to XP downgrade question

    I just bought a Satellite A300 with the following details:

    Model satellite A300/Y00 (exclusive to Dikc Smith Electronics in Australia)
    PSAG0A-02Y009
    2.1 Ghz Intel Core 2 Duo T8100
    2 GB RAM DDR2 (667 MHz)
    250 GB SATA HARD drive
    Graphics Intel X 3100 (GM965)
    MS Windows Vista Business pre installed
    MS WIndows XP downgrade for A300 recovery disk media

    Basically, I just turned on and configure everything, nothing about that fact yet, not even other software installed.
    I immediately made 2 copies of the recovery of the product for Vista media. So the disc XP and Vista should have all the drivers on them.

    I want to install a software particularly (for programming electronic components), but the company said that it is not fully compatible with Vista. Therefore, I would like to downgrade to XP and use it for 6 to 12 months, and later POSSIBLY roll back to Vista.

    Now, the information provided by Toshiba are limited with respect to the downgrading to XP. (And there is absolutely nothing about to go back to Vista).
    The documentation provided shows four options at retirement:
    1) recover to out-of-box-state,.
    (2) covers the single State of Windows,
    (3) recover without changing hard disk partitions,
    4) recover on a custom size partition. He then goes on to say "Please do not select 'Recover without changing the partitions of hard drive' as a method of recovery." Windows XP cannot be used by the composition of the partition of Windows Vista".

    First of all, what are the ramifications of the other options? What is the best/worst one and why?

    If I understand correctly, the partitioning of the hard drive must be changed for the downgrade to XP.
    But in Vista, there is a separate partition to store data recovery, so that the partition will be changed (lost).
    If ever I decide to go back to Vista, the Vista recovery media I created also change the partitioning to the way it was originally?

    I dared not touch anything until I'm 100% sure of what needs to be done.
    If anyone has any experience with this or advice, I would be grateful for your expertise.
    Feel free to be as detailed and technical that you like - I want to 'understand' and not just 'do '.

    Thanks in advance,
    Robert.

    Hi Robert

    I put t have Satellite A300 and I don t have an Australian notebook but I m, owner of another European model Satellite with preinstalled Vista operating system!
    In any case, I want to share my experience with Vista and XP and of course the recovery procedure on E

    First I noticed that the new notebook series is not delivered with the Toshiba Recovery CD but the image recovery is store on the HARD drive and you can create and burn image from own DVD.
    Seems that you already have.

    As you already suggested the Vista supports 2 different partitions. A partition is the system partition and the partition of the other, smaller, hidden was created for Vista backup files. So if something goes wrong with your Vista operating system, you can use the repair function on Vista to repair the operating system. In this case, small backup partitions, hidden in necessary.

    I also like Xp and that's why I installed it on my laptop. I didn't format t disc installed HARD but the XP on a new created partition.
    You can create a partition in Vista's disk management.
    In any case, I now have a dual boot OS and I use Vista and XP.

    With regard to the use of the Vista DVD recovery;
    If you want to go back to Vista, you will need to boot from the Toshiba Recovery CD and the Vista installation process should begin.
    But be aware that the Vista recovery CD would format the whole HARD drive.
    It would erase the partitions and remove stored data.
    Therefore, you must back up your data before that you would use the recovery CD!

    Hope this little info will help you.

    Good bye

  • 1IZ satellite A200 with Vista crashes every day without no reason

    Hello guys,.

    I have a Satellite A200 with Vista Home Premium installed. In the past months, the BONE is suspended every day, I was not able to detect the reason. nothing is having replied to the questionnaire, not even Ctrl-Alt-Delete, the only solution is to stop from the power switch.
    I do not found something wrong in the system log, so I do not know what to do. Toshiba PC diagnostic shows everithing OK.

    What can I do? Perhaps a cooling problem? A guide for cleaning?

    Thank you.

    Hello

    So to be honest, it's hard to say what are the really causes your system to hang. Possible reasons:

    HIV 1-infected
    2 problem of file system Os including drivers, programms...
    3 had to be clean
    hardware problem 4

    I recommend:

    1 search for viruses
    2 reinstall the drivers (especially as a vga and chipset drivers). Check installed programs
    3 use compressed air jet to blow off the dust from the cooling module.

    If this does not help, do a fresh install of the operating system. Then we will see what to do

    Welcome them

  • Can not install device driver USB IRDA Kingsun on Satellite A100 with Vista OS

    I have a USB IRDA Kingsun device that worked well on a desktop with XP but my Satellite A100 with Vista defies installing the drivers that came on a CD with the IRDA.

    How can I install or does anyone know one that works with Vista?

    Hello

    If you are not able to install the 3rd party device IRDA driver on Vista, it seems that the disc is not compatible and don t support Vista.
    Seems you have to contact the manufacture of the IRDA device and ask the compatible reader

    But maybe that you're unlucky and the Vista driver does not exist?  :|

  • Question about Satellite L40 and Vista 32 bit

    Hey all, I have the following problem.
    I have Satellite L40 series 2 PC and tried to install vista ultimate 32 bit, and they freeze only on the process of "complete installation."
    I read in some other forums and found it is not only my problem. I tried with 64 bit ultimate, it's all OK. It may be, the main problem is that it is not possible to install VISTA 32 bit.
    I only ultimate now, so my question is if anyone knows or installed to another type of Vista 32 bit on these series?

    Thanks before

    As far as I know that all new models of Toshiba laptops come with Vista 32 bit. Satellite L40 is offered in three different models, and each one also comes with 32-bit operating system. If you have the recovery DVDs with your laptop is Vista 32 - bit OS. I assume it must be the Home Premium version.

    I don't have a model L, but my model works well on Vista Ultimate.

  • Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB _ @_. _, Thank you

    Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB * address email is removed from the privacy *, thank you

    How does this relate to the features of Windows Update?

Maybe you are looking for

  • These latest Touchpad dm4t vulnerabilities

    I am running a number of product HP Pavilion dm4t-2100, LX124AV. The night last about 01:30 - 02:00, I started having trouble with my touchpad, where when I go to the for use, it can click is more and the touchpad only slightly recognizes my moves th

  • HP Officejet 6500 n710z: paper feed not working

    My printer suddenly stopped picking up the paper from the tray.  I cleaned the rollers, but the only way he'll be looking for if I force a sheet at the back of the printer.  I get error #0x61011bef, but it gives me no help.

  • Envy dv7t-7200: SSD upgrade in 2nd slot on HP Envy dv7t-7200. Cannot find or run the Bios

    So I added recently internal a second drive in my HP Envy dv7t-7200 because she had a second slot. The first was a 1 TB HARD drive and what I added is a compatible 500 GB SSD from Crucial. At startup, the SSD was not recognized as I can't find anywhe

  • Get rid of folders showing half the page by e-mail

    Look at one of my emails is impossible at this stage given that half of the page is taken up with my categories of folders on the left side of the page.

  • Photoshop detects not Nvidia GTX 860 m

    I have an Alienware M17x R4 with:10 1511 Windows version (OS Build 10586.63)NVIDIA GTX 860 mIntel Core-i7 3740QM with Intel HD4000NVIDIA driver version 361,43Intel 10.18.10.4276 driver versionI spent a whole day trying to get Photoshop to recognize m