Update BIOS Satellite L30 - 10V died after unsucsessful

Similar Questions

• Satellite L30 - 10V - CD/DVD read not all drives because Windows 7 upgrade

  I have a Satellite L30 - 10V which I've updated Vista to Windows 7 (full version). I am now unable to read any CD at all. He thinks that all CDs are totally blank new CD

  Anyone has any ideas what could be the problem?

  Hey,.

  > I have a Satellite L30 - 10V which I've updated Vista to Windows 7 (full version)
  Did you do an upgrade or complete new clean installation of your version?

  Anyway, the drive worked during installation that you was not able to install Windows. So I doubt it s hardware related issue

  In your case I would try to remove the upper and lower filters in the registry:
  1.demarrez-> Run-> Regedit
  2. navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  3. in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  4.reboot.

• Satellite L30 - 11 d - after charging battery, it is said that 8% remaining

  Hello

  I have Satellite L30 - 11 d and the battery will be cooler. Laptop works when the power adapter is connected. When the AC adapter is plugged in the battery icon seems to be charged and the led will turn orange and green then as if the laptop has finished loading.
  However once the AC adapter is removed he says only 8% remaining and will stop in 5 minutes.

  I just bought a new AC adapter, and I updated my BIOS. Very confused on how to solve this problem, any advice will be very useful.

  Thank you

  Hi TL30,.

  In my view, this problem is only related to the battery and it should be replaced. A block can only be recharged about 500 times and after that, replace it because it can t be charged to 100% more.
  It has nothing to do with the adapter BIOS or sector

  Contact a service provider allowed in your country, or you are looking for online shops where you can buy a compatible battery. On your current battery, you will find a part number where you can ask Google to do this.

• Satellite L30-115 returns after hibernation too early

  Satellite L30-115.
  The lid switch opens even slight movements (with the lid closed). What makes my book out of hibernation.

  Energy saver, I put to enter the Hibernate when I press the power button and do nothing when I close the lid. So I expect to do nothing when I opened the lid, too.
  The laptop still exists, after hibernation.

  Is this a bug in the BIOS, normal behavior, is there a place to put not to resume when I open the lid? BIOS and energy savings are updated recently.

  Thank you
  Dan

  When the lid is closed the small switch will activate and laptop knows what lid are closed. Light moves this contact will be interruption and laptop think the lid is open. Because of this, your mobile PC wakes up from hibernation mode.

  A few minutes ago I tested how reacts a Satellite phone and also my new Vista preinstalled Satellite P200D preinstalled old WXP. I did the same settings that you are, and the result is the same. After the opening of the notebooks of the lid to wake up from hibernation mode.

• How to reset CMOS/BIOS Satellite L30-134?

  Portable satellite L30-134

  Did a stupid thing earlier and started putting my supervisor for the BIOS password when my 8 month old was sitting on the couch next to me... Well, the next thing I know his hands where all over the keyboard, then press the ENTER key was pushed, aaaahhhhh! The password is now set and I ain't got a clue what it is.

  So my question: How to reset the CMOS/BIOS to lose the password or is there another way around him?

  Would like to thank all appreciated help/remedies.

  TIA

  Graham

  It is not possible.
  The entire passwords must be removed before you start with the update of the BIOS.
  Sorry, but if you don t know the password you cannot delete it and the BIOS update procedure will not work!

  ASP in your country is a last chance for the removal of the password. Guys are able to remove the password. It shouldn't be very expensive.

• Update BIOS Satellite L20-121 model: PSL20E

  Hello
  I want to update bios v1.10 for v1.80. I downloaded the version of victory, but the following error:
  Part ID of the system BIOS and the new Image file are different (System = EW5 EW6 = lead). The system platform may be different from the Image file. You sure you want to continue?

  What should I do? Go forward or not?
  PS: I looked up the Bios updates with the model number of the laptop.

  Post edited by: newsalex

  Hello Alex

  I put t know how old is your device exactly but AFAIK Satellite L20 is fairly new to laptop and I really want to know why you want to update BIOS.
  You have problems with your device, or you want your device is updated?

• Satellite M30X-111 died after about 15 sec after power to the top

  Hello
  My M30X 111 died after about 15 sec after power upward. The blue light comes on, the fan starts and then turns off & the dies machine - however, the blue switch remains on. Then I have to keep the power button up to swith off the machine.

  I can't go as far as the BIOS and it does not start from CD, etc.

  Thanks in anticipation,

  Hello

  The laptop goes to home Toshiba screen?
  If yes there is no hardware malfunction but perhaps something wrong with the software.

  You suggested that it of not possible to enter the BIOS. How have you tried to get into the BIOS?
  As far as I know, this unit uses a Phoenix BIOS so you must press the F2 key immediately after switching on. Press the "F2" key several times to make sure that the option has been enabled.

  The alternative to boot from the CD/DVD drive is using the C key. The same procedure here: press the C key immediately after starting the laptop.
  (the CD must be inserted before you start)

• Update BIOS Satellite 1730

  I want to update BIOS and who have already downloaded and the file dezipped. This file that I copied to a floppy disk. In the description they say I have to restart the computer and press a certain key (F12 or the left of the space bar). But it did not work. Does anyone know how to do this?

  Guenter.

  Hello

  on this model you do not need to press F12 or another key. Just unzip the packege BIOS on a blank floppy disk, reboot the machine and make sure it boots from the floppy disk. The upgrade of the BIOS will be done automatically.
  Make sure that you have the power adapter plugged!

  Tom BR

• Satellite L30-10T - downgrade after XP is very slow

  Hello

  I downgrade my Satellite L30-10T from Vista to XP Pro SP3 and I installed all the drivers, but I have some problems:

  All control systems are very very slow, is not possible to switch-off order XP, install new programs is slow...

  Thank you

  Hello

  You have yellow exclamation marks in Device Manager?

  On the Toshiba site I founded an installation instructions document. Did you follow this order of installation for all drivers and tools?

  Also please check if Device Manager you have enabled DMA mode for the primary and secondary IDE controller.

• Where to find the Bluetooth on Satellite L30 - 10V

  Does anyone know where to find my bluetooth here? I we told me he came with built-in bluetooth, but can't find it anywhere?

  Hello

  What do you mean with where to find the BT here? Looking for the driver of BT stack or what?

  The L30-10 are not compatible Bluetooth! I put t know where you got this info that a L30 - 10V would support the BT but it of not true!

  Once again; Maybe another L30 unit supports a BT but not the L30-10!

• The fans started later after 3.10 BIOS updated on Satellite L30 - 134

  Hello
  Please, so prompt correctly I think?
  Look at me is Toshiba L30-134.

  Today, I have loaded the new BIOS version for this portable goal - 3, 10 - WIN and she put in place instead of preceding.
  During the installation, everything happened perfectly, but after installation I discovered, that the threshold of cooler working temperature has changed!

  Now cooler began to be launched to the realization by the processor of the temperature of heating from 63 to 67 degrees and with cooler previous BIOS worked at 58 degrees!

  If it is unsafe for the processor? Or and was designed also Toshiba engineers have specifically changed a temperature threshold in the new BIOS version?

  P.S. I bring an apology for my disgusting English language. It is not my native language :-)

  Don t worry and don't worry my friend ;)
  The temperature of my CPU on non-Toshiba notebook is also about 67-70 ° C and everything works great for years!

  Greetings

• Satellite A500-136 died after the BIOS update.

  Hello friends...

  Today, I tried new BIOS flash, but in 21 of the 37 it stuck.
  I waited for an hour, but nothink, just stuck.
  No one key is active.

  Then I removed my batery and tried to turn on the computer and the screen is black.
  Nothink else does not appear here. I think the bios is dead...

  WHAT I have TO do, I don't want to get to the guarantee, because I need to wait a month, only then my computer will be fixed.

  Please help please please... :(

  SORRY FOR MY POOR EANGLISH

  Hello

  It s a shame hear that mate!
  It seems that something was wrong during the update of the BIOS, and so the laptop won't turn on.
  I'm afraid that you can't do anything else as to contact the local ASP m!

  The local ASP technician must check the device and possibly it might update the BIOS using a special BIOS and the special procedure.

  Good luck buddy

• After RAM upgrade on stick Satellite L30 - 10V single RAM is recognized

  I just added a stick of Ram 1 GB Crucial in the L30-10 (PSL33E), but only the recognized 1 GB, the Hyundai stick (512 MB), which shipped with the laptop is no longer used by the system.

  I tried to pass it around, but I can only get 1 stick of RAM to work at the time, is 1 GB, when the two Rams are placed in slots or if only the 1 GB is installed or 512 MB when I leave the 1 GB.
  Do you have someone at - he managed to get 2 stick operating simultaneously, on this system?

  BTW, CPU - z recognize the two sticks and reports correctly 1536 MB, the BIOS but only 1 GB, in fact less, since some plans to unlock the graphics card.

  The version of the BIOS on my system is V2.80, dated 05/03/2007 and the two memory are the same speed PC2-4200.

  Hey Abe you're really cool. Sending all these links other forum users can see a lot of different themes is discussed before and using the option to search or the knowledge base of Toshiba, they can find a lot of useful info.

  Toshiba knowledge base can be found under http://eu.computers.toshiba-europe.com > support & downloads > support home > troubleshooting Knowledge Base

• Low graphics performance after the setting of the default BIOS satellite L30 - 10W

  Hello!
  In a first time - im not English so my language is wrong.
  Half a year ago and windows vista showed 3.8 also efficient graphics card, I bought Toshiba L30 - 10W. Then, I played without any problems on windows xp (call of duty 2, flatout 2, fifa 07). But lately, I supported at the default bios and now I can not play on windows on this game because I have about 5 frames per second. I tried to reinstall modded, latest drivers, old drivers, windows drivers - nothing works.

  I installed vista rescue dvd I got with the computer and now the effective partition of the graphics card is 2.3! That means when I bought computer graphics card was overlock? I have phoenix bios, buy, that I do not see here all functions related to the graphics card.
  Help, please!

  Hello

  I ve got a L30 with Vista and checked the BIOS values.
  I must say that the value of the memory is not editable in the Phoenix BIOS!
  It s assigned automatically!

  In my opinion, you should check if it is possible to change some values in the ATI catalyst graphics.
  Otherwise, reinstall the OS using the Toshiba Recovery CD

• Update of BIOS Satellite L30 - 10s - error code 1072

  Hello

  I am trying to update my BIOS using the download from the Toshiba Page but just open the program causing the error 1072... ?

  "Unable to load driver.
  C:\Users\...\temp\WZSE2. TMP\PHLASHNT. SYS.
  Please check your accounts... (I am administrator)
  The specified service has been marked for deletion
  Error 1072 "code

  Any help would be great

  Thank you very much

  Hello

  I had the same question that I've updated couldn t of the BIOS. The solution to my problem was very easy: you need to extract all files from zip archive, and then start the update. So extract all files to a new directory and try to start the update.

  I hope that helps! ;)