Update blackBerry OS Z30 10.3.1 - questions and question about how do to uninstall / restoration

Hello.

From the start, I try to stay calm and professional, objective. Pretty sure I missed the mark, but then, read on...

I'm having some problems with the OS 10.3.1 update. Before someone says to the research councils, I. For hours. On various Internet sites. I would appreciate (but I'm not optimistic for) an official response from BlackBerry.

1. I use a Z30. Carrier is Rogers Wireless (Canada) updates are off. Yet, incredibly, the update came down in any case, when I was driving, didn't know until I got home. Device to reboot and now 10.3.1xxxx is on my smartphone.

QUESTIONS:

1. the screen turns off. Whenever I wake up, the display is enlarged. I have to move and move and gesture to get the display to fit the screen, so I can't unlock the phone.

2. the home screen is not editable and is the default value. Now I have to drag to the hub or my applications. Twice = 1/2 labour productivity.

3. the assistants touted what, exactly? As far as I know is when I call via voice Bluetooth headset, the call would be (75% of the time) be done. The other 25% of the time, I tell him 'Call MOM Home' is not the same thing as "search battery charge. Yes, my bluetooth is a very expensive, side that has no problems of recognition with another device. Now, the vocal part (Assistant?) does not ALL calls. At best, it offers me suggestions, usually not related (Linda <> Tom) and wasting my time reading on several TELEPHONE NUMBERS. Good grief, if I knew that the darn phone number, I just say, call (phone number). It would be faster than the sitting through it all. In otherwise, voice Assistant something doesn't do much for me. I put it, as far as I know, to do the minimum, not interact with everything on my phone.

4. Although the new camera app now (finally!) makes the colors more or less correctly, whereas before everything was tinged blue, I'm not a fan of the new positioning of the controls. It's ridiculous to put the video button next to the "Take a photo" button. The touch sensitivity is therefore, that I find myself video recording rather than take a picture wanted - and the time is lost. I really miss being able to touch the screen to take a photo. Now I need to aim a small dot at the bottom. If I wanted an iPhone, I would have bought an iPhone!

5 more at the front of the camera, it is now difficult to take pictures. As in, I touch the icon to bring up the list of photos, and the last shot never appears. I have to slide to find. And in a different direction now.

6. in the hub, in particular, the "select multiple" used to be in the middle of the menu. Now I have to scroll down to find and activate it.

7. What is with the battery drain honking? More DIY required on my part to get it back to waiting for 4 days, that I used to enjoy?

LACK OF UPDATED FEATURES:

1. I was really hoping that this last updated with the NUMBER of the entry of the phone display. As job 1, 2 work, etc. I find it helpful to assign the direct number always as job 1, then toll-free as job 2, reception work 3, home knit 4, and so on. Then it is easy to use (or was) to call the number I want without knowing what really is the number of votes. I was hoping also that the update which would therefore eliminate offensive message 'next time, just say call xxxxx Mobile 2' or something else. I'm bloody well would be if there was anything in contacts to display the sequence of numbers.

2 calendar. Seriously, why can't set a reminder for somewhere between 3 and 7 days? I'm so tired of defining a day (7-3), making the calculation in my head to work around weekends or other events) and then having to update the reminder when I get to the range of BlackBerry - approved 3 days. Other smart phones allow a custom setting. I would also ask, put first the custom reminder. We do not do scroll all the way down to find!

3. I would like to put my icons used on the fricking HOME SCREEN! I don't like the cutesy pictures. I'm trying to do my job more quickly and easily as possible.

4. fix the darn voice control mechanism. I bought expensive pieces of Bluetooth. All I want to do is voice component. That's all.

5. get some control over the spelling. There is no way to change the words that are "learned" through the monitoring of its use.

6. enough with the U.S. - marketing. Mountain time is Mountain time. Not US - MST. I'm not picking up something like that, I don't like that who commits an offence. He is as stupid as the settting (like Apple) zones in the "Calgary, Alberta." I do not live in Calgary. I don't live in the GENERIC Mountain time zone.

7. taking the floor, I also speak English. Not American English U.S. - spelling. How about giving some love to the Canada

8. give me the option to restore the update. Or at least choose what parts I want.

9 extend the supported file formats. At this stage, I can only load documents on my smartphone if they are Adobe or Microsoft Office. Here's the thing - I operates in the universe of Corel WordPerfect. If the Z30 is limited in what I can / can not do with it. Why the hell can't I just copy my FILES to my phone? Even if I can't change them, I can use the chip memory 64 GB huge like a flash drive to take my files with me when I travel. I don't always take a computer... sometimes I use which is destined. More have them on the phone SHOULD allow me to email them or send in other ways... whether or not BlackBerry to read.

===================

REQUEST FOR ASSISTANCE:

Best - out an immediate UPDATE to solve these problems and to add the features I pointed out above. I'm probably not the only one faced with limitations integrated interface and the information screens.

Please tell me how I can restore / uninstall / whether this "update".

I shudder to think that the only solution is to backup, recovery, and then reload the Z30. Others have tried and failed.

MORE VENTILATION;

The only reason why I'm still on BlackBerry, it's that the questions and to some extent a difference of perspective in regard to the available phone / features are even less problematic on BB Z30, they're on ios or android platforms. Quite in my opinion. But then, I'm the one with a frustration level into the red zone.

Thanks for reading. I'll be even more grateful for the resolution of some.

Cinereo wrote:

QUESTIONS:

1. the screen turns off. Whenever I wake up, the display is enlarged. I have to move and move and gesture to get the display to fit the screen, so I can't unlock the phone.

Go into your settings > accessibility > and disable Mode magnify.

If you do this, I would like to read the rest of your post and see what I can help with... and Yes, staying quiet is a great feature... I understand that you might be frustrated.

Tags: BlackBerry Smartphones

Similar Questions

  • Update blackBerry 10 Z30 os 10.3

    New Board of Directors, id like Update 10.2 to 10.3, thank you

    We discuss leak or unofficial software here. Thank you.

  • BlackBerry touch Z30 responds, keyboard not typing in the fields, how to install?

    As the title suggests. I did a reset of the safety, the touch screen works very well and can move around as usual. It is every time I try to type on the keyboard. It depresses and produces noise, but no character come in the fields. I've recently updated to 10.3.2.xxxx now I can't connect to my BB protect in order to access the phone. Its stuck in the installation program.

    What can I do to overcome this? Any help is very appreciated. I know that my loggin and password. Just can't so can not go back to a full backup in link BB.

    Hello and welcome to the community!

    Given what you describe, I would recommend a reloading very clean BONES and also through the unofficial autoloader methods:

    Hopefully that will clear up the problems you encounter (in condition, of course, that this behavior started directly after you have completed the update you mentioned and haven't started some time before that).

    Good luck and let us know!

  • Updated blackBerry Smartphones to 5.0.0.900 and can not synchronize Organizer data now

    I have a Curve 8520 I updated my device / desktop softwear at 5.0.0.900 and can not synchronize Organizer data any longer.

    When I go to the Organizer, I can not select the checkboxes for the address book, calendar, tasks, Memo.

    When I press on the settings of a window opens which is called BlackBerry data synchronization and he said to determine the name of configuration root for the main system...

    On top of that then pops up another window called Intellisync

    and he said: X unknown error reported. My only choice is OK.

    I tried using the former Office Director to synchronize my organizing data which worked fine and synced my microsoft outlook email, calendar and contacts from my phone very well. Now, it will not synchronize the two. It also gives me an unknown error.

    Please advice, I have to get my data from Organizer synchronized again.

    Thank you

    J9

    Hi and welcome to the Forums!

    Have you installed on your PC, the new device OS package? And, if so, did you also remove any prior OS package PC?

    Otherwise, a clean startover might be in order:

    I suggest the following steps (reboot insert a lot of restarting your PC... not only restarts, but at full power down). In addition, it is recommended that you are connected to the PC on an account with full administrator rights. In addition, under Vista/Win7, use the option "Run As Administrator" for everything.

    In addition, it was also reported that when your user profile on windows (type "echo %UserProfile%" in command prompt) contains spaces, then the installer will not work. To resolve this issue, log off from your Windows account and sign in using the local administrator account (or any other name of account without spaces) and install office (for all users).

    (1) remove the package to update your device OS of your PC (Add/Remove Programs)

    (2) properly uninstall the RIM DTM software:

    • KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    • Some noted that there are several registry keys to remove talk in this KB... don't forget to get your all associated with RIM registry database
    • Others have reported the use of a registry cleaning tool to be also useful
    • Still others have reported the use of your original PIM (Outlook, NOTES, etc.) Installation CD, run the "repair" to be helpful in some situations process

    (3) get a new RIM DTM software download:

    • Choose the version which is more recent and (if any) compatible with your PIM (if you are synchronizing via USB):
    • KB12268 Applications supported by BlackBerry Desktop Manager to synchronize

    (4) to download a new copy of your package to your carrier OS device (on your PC):

    (5) install DTM on your PC

    Installation of 6) (also on your PC), device OS package

    (7) start the configuration Organizer:

    • KB17022 How to configure applications to Organizer for synchronization using BlackBerry Desktop Manager

    If all goes well, who's going to make things again.

    Good luck and let us know!

  • Update the BIOS Qosmio X 500 - 11U - Question about new

    Hi everyone

    I need to clear something up, the update of the BIOS that was published on December, 2010 was the 2.90 now a new March 2011 version is called 1.40! Is this an upgrade a downgrade or a joke? Should I proceed with the latest 1.40 or stick with the old 2.90?

    I forgot to mention that I own a X 500 - 11U and thanks in advance

    Hi nick73,

    On the European driver of Toshiba download page, there are two versions available:

    Update BIOS 1.40 - VICTORY for X 500 PQX34E models
    Update BIOS 2, 90-VICTORY for X 500 PQX33E models

    Your model X 500 - 11U belongs to the PQX33E series and this means only the update of BIOS 2.90 is compatible and 1.40 would be the wrong version.

    So it of not a joke and before you search for BIOS update next time, also use the right number of reference ;)

  • Question about how Oracle manages the Redo logs

    Hello

    Assuming a configuration which consists of 2 redo log groups (groups A and B), each group of 2 disks (disks A1 and A2 for Group A) and B1 and B2 disks for Group B. Additionally, assume that each redo log file resides by itself in a disk storage device and that the device is dedicated to her. So in the situation described above, there are 4 discs, one for each redo log file, and each disc contains nothing other than a redo log file. Also, assume that the database is in ARCHIVELOG mode and the files from archive is stored on another different set of devices.

    kind of graphically:
        GROUP A             GROUP B
    
          A1                  B1
          A2                  B2
    The question is: when the disks that make up the Group A are filled and Oracle switches to the disks in the Group B, can the group drives to take offline, perhaps even physically removed from the system if necessary without affecting the functioning of the database? Can the archiver process temporarily delayed until the disks (which have been removed) are presented online or is the DBA have to wait until the end of the process to archive a copy of the redo log file creating in archive?

    Thank you for your help,

    John.

    Hello
    A journal of the groups fall

    To remove a group of online redo logs, you must have the ALTER DATABASE system privilege. Before you delete a line redo log group, consider the following precautions and restrictions:

    * An instance requires at least two groups of files logging online, regardless of the number of members in the groups. (A group is one or more members.)
    * You can delete a group of newspapers online redo only if it is inactive. If you need to drop the current group, first force a log switch occurs.
    * Make sure a group of online redo logs is archived (if archiving is enabled) before dropping. To see if this happens, use the view LOG V$.

    SELECT GROUP #, ARCHIVED, STATUS FROM V$ LOG;

    GROUP # ARC STATUS
    --------- --- ----------------
    1 ACTIVE YES
    2. NO CURRENT
    3 INACTIVE YES
    4 INACTIVE YES

    Delete a group of newspapers online redo with the SQL ALTER DATABASE statement with the DROP LOGFILE clause.

    The following statement drops redo log group number 3:

    ALTER DATABASE, DROP LOGFILE GROUP 3;

    When a group of online redo logs is deleted from the database, and you do not use Oracle managed files, operating system files are not removed from the disk. Instead, control of the associated database files are updated to remove members of the Group of the database structure. After deleting a group of online redo logs, make sure the drop completed successfully and then use the command of operating system appropriate to delete the dropped online redo log files.

    When you work with files managed by Oracle, the cleaning of operating system files is done automatically for you.
    Your database will not be affected as you can work with 2 files, redo log in each group, as the minimum number of redo log in a database file is two because the process LGWR (newspaper writer) writes in the redo log in a circular way. If the process crashes because you have 2 groups only if you want to remove 1 Add a third and make that the current group and remove the one you want to be offline.

    Please refer to:
    http://download.Oracle.com/docs/CD/B10500_01/server.920/a96521/onlineredo.htm#7438
    Kind regards
    Mohamed
    Oracle DBA

  • Four questions about how to change the Satellite L650 - 1 M 0

    Hello

    The laptop Toshiba L650 - 1 M 0 is possible to add the Bluetooth?
    Currently, I don't have a WiFi card.

    I have a second question:
    The laptop Toshiba L650 - 1 M 0 is possible to replace the ports USB 2.0 to 3.0?

    And the third question:
    The laptop Toshiba L650 - 1 M 0 is possible to replace the matrix with a resolution of 1366 x 768 full HD (1920 x 1080) resolution?

    Most recent:
    The laptop Toshiba L650 - 1 M 0 is possible to replace the processor and graphics card?

    These questions are for the future. I mention these parts when you are already old and weak.

    Sorry for my bad English, but I used the Google Translator because I do not know how the English language. I only know the Polish ;)

    Please write without mistakes, because the Google translator will be able to translate for me.

    > Is that the laptop Toshiba L650 - 1 M 0 is possible to add the Bluetooth?

    I think it would be possible to upgrade with the combo Wifi/BT card.
    But I haven't found any info what WLan/BT cards combo would be compatible 100%.
    You should test

    > Laptop Toshiba L650 - 1 M 0 is possible to replace the ports USB 2.0 to 3.0?
    No, the USB ports are part of the motherboard.

    > Is that the laptop Toshiba L650 - 1 M 0 is possible to replace the matrix with a resolution of 1366 x 768 full HD (1920 x 1080) resolution?

    I guess it would be possible, but we must find a 15.6 screen that supports such a resolution.

    > Laptop Toshiba L650 - 1 M 0 is possible to replace the graphics card and processor?

    GPU is not extensible.
    In some cases its possible to upgrade the processor, but you will need to check which processors are supported by Mobile Intel HM55 Express Chipset
    But even if the chipset would be favourable to a new processor, there would be still pending regarding BIOS support.
    However, this upgrade took isn t supported by any laptop manufacturer, and I guess that its your own risk by doing this.

  • A question about how to properly manage a single timer on a screen, when to schedule and cancel?

    A matter of design, which is a good implementation of the following?

    I have a single class that extends screen. In this class, I have a unique clock and the internal class that extends TimerTask.

    public class MyScreen extends MainScreen {
    
      private Timer _t;
    
      private class MyTask extends TimerTask{
        public void run() {
        ...impress your girlfriend with cool logic...
        }
      }
    }
    
    • What is the best place to set the timer to run the timer whenever the screen is loaded?

      1. Constructor
      2. ScreenUiEngineAttachedListener
    • What is the best place to cancel the timer to ensure truly cancelled once the user has closed the screen or press the physical end on the device?

      1. ScreenUiEngineAttachedListener
      2. onClose
      3. keyDown
      4. .. .or all this?

    Is it advisable to use?

    Thank you.

    Do not start and cancel the timer - create, plan and cancel TimerTasks!

    Have a static _t private timer = new Timer(); -This way, you will have just one per application (at least for this class), statically initialized. Cancel the timer just before you shut down the application. Plan all your TimerTasks on a single clock.

    Your question then becomes "when can I plan and cancel my TimerTasks?" It depends on your specific needs for your TimerTasks, but the right places would be:

    Annex:

    Screen.onDisplay () / onUiEngineAttached (true)

    Screen.onExposed () (if you go the road of onObscured() below)

    Screen.keyChar () / keyDown() / keyControl() (if you go with the DeviceInfo.getIdleTime check () below)

    Screen.navigationClick () (see above)

    Screen.touchEvent (see above for touchscreen devices only)

    To cancel:

    Screen.onUndisplay () / onUiEngineAttached (false)

    Screen.onObscured () (pairs with onExposed() above)

    If (DeviceInfo.getIdleTime () > yourTimeoutValue inside) TimerTask.run () method - must also deal with the above-mentioned keyChar/keyDown, the navigationClick() and the touchEvent() then.

    One thing to keep in mind - a TimerTask actively running will drain your battery pretty quickly by preventing your phone to enter a low power mode, so don't forget to cancel it when you don't need. On the other hand, a timer 'active' without any scheduled on that, go to sleep just forever, so don't bother killing/recreate.

  • question about how to combine the two scripts.


    Hello

    I have a sql script that can display a table (or view) all the information, it works fine. I call it validate_table.sql, as below:

    command prompt
    accept invites owner "Enter table owner:
    accept invites from TABLE_NAME "Enter object (table/View...) "name:"


    column owner format a10 column 'owner '.
    column format a30 topic 'Object name' object_name
    column object_type format a15 direction "Type of object".
    Status format a10 column titled "Status".
    in the heading of column created format a20 "created."
    the LAST_DDL_TIME format a20, heading 'LAST_DDL_TIME.
    Select
    owner
    object_name
    object_type
    status
    , to_char (created, "DD_MON_YY hh24:mi:ss") created
    LAST_DDL_TIME,
    Of
    DBA_OBJECTS
    where
    object_name = upper ('& table_name') and owner = upper ('& owner');


    command prompt

    prompt -- ----------------------------------------------------------------------- ---

    Guest - table/view structure-

    prompt -- ----------------------------------------------------------------------- ---

    command prompt


    describe and owner... & table table_name

    command prompt

    prompt -- ----------------------------------------------------------------------- ---

    guest - list assigned user/subsidies-

    prompt -- ----------------------------------------------------------------------- ---

    command prompt

    set pagesize 50000
    set linesize 10000
    set verify off
    Set feedback off
    column lvl format A4 direction "Lvl".
    proprietary format of columns A14
    format column in table_name A29
    A38 dealer column format
    column privilege A10 format


    SELECT 'Role' lvl, t.table_name, t.grantee, t.owner, t.privilege
    OF dba_tab_privs t
    WHERE t.grantee IN (SELECT FROM dba_roles role WHERE = role t.grantee) and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
    UNION
    SELECT 'User' lvl t.table_name, t.grantee, t.owner, t.privilege
    OF dba_tab_privs t
    WHERE t.grantee IN (SELECT username FROM dba_users WHERE username = t.grantee) and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
    UNION
    SELECT 'Pub' lvl, t.table_name, t.grantee, t.owner, t.privilege
    OF dba_tab_privs t
    WHERE t.grantee = 'PUBLIC' and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
    ORDER BY 1, 2, 3;

    command prompt

    prompt -- ----------------------------------------------------------------------- ---

    guest - list of synonyms created.

    prompt -- ----------------------------------------------------------------------- ---

    command prompt


    proprietary format of columns A15
    synonym_name A20 column format
    A15 table_owner column format
    format column in table_name A40
    DB_link A40 column format

    Select the owner, synonym_name, table_owner, table_name, DB_link from DBA_synonyms where Table_name = upper ('& table_name') stopped by the owner;


    command prompt

    prompt -- ----------------------------------------------------------------------- ---

    guest - list index created-

    prompt -- ----------------------------------------------------------------------- ---

    command prompt

    Select
    table-name
    index_name
    index_type
    nom_tablespace
    status
    of DBA_indexes
    WHERE table_name = upper ('& table_name') and owner = upper ('& owner')
    order of table_name, index_name;


    command prompt

    prompt -- ----------------------------------------------------------------------- ---

    guest - list of constraints-

    prompt -- ----------------------------------------------------------------------- ---

    command prompt

    format column in table_name A15
    format of column cons_type A15
    cons_name A20 column format
    check_cons A25 column format
    VALIDATED A20 column format
    column status A10 format
    last_change A20 column format

    Select
    table-name
    (case constraint_type
    When 'P', then 'Primary Key '.
    When 'R' then 'Foreign Key'
    When 'C' then 'check '.
    When 'U' then 'single '.
    When 'o' then 'read only display '.
    When 'V' then 'check the view. "
    When 'H' then 'Hash expression. "
    When 'F' then 'REF column.
    When the of ' then 'additional logging.
    cons_type end)
    constraint_name cons_name
    condition_de_recherche check_cons
    status
    VALID
    last_change
    of dba_constraints
    where owner = upper ('& owner')
    and table_name = upper ('& table_name')
    order of cons_type;

    I have another script that allows to display the newly created tables (table, table names) in the last 24 hours.

    SET SERVEROUTPUT ON;

    DECLARE

    CURSOR tmp_cur IS

    SELECT master, object_name

    FROM dba_objects

    WHERE object_type in ('TABLE', 'SEE') and the owner not in ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN") and last_ddl_time > sysdate - 1;

    tmp_rec tmp_cur % ROWTYPE;

    BEGIN

    FOR tmp_rec IN tmp_cur LOOP

    DBMS_OUTPUT. PUT_LINE)

    tmp_rec. Owner | ' ' || tmp_rec.object_name);

    END LOOP;

    END;

    /

    The gap of the first script (validate_table.sql) is that it can only check table one by one by manual entry, then how can I combine these two scripts, to make a scipt that can check all newly created tables (not a table) in the last 24 hours?

    I thank very you much in advance!

    Hello

    If you already know how to find the owner and all the tables created table_name recently.  One thing you can do is to change all the WHERE clauses in validate_table.sql, so instead of things like

    where object_name = upper ('& table_name') and owner = upper('&owner');

    you say

    WHERE (owner, object_name) IN

    (

    SELECT master, object_name

    FROM dba_objects

    WHERE object_type in ('TABLE', 'SEE')

    AND owner NOT IN ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN")

    AND last_ddl_time > SYSDATE - 1

    )

    ;

    Here is another approach:

    Validate_table. SQL is quite handy as it is.  You may want to run this script for tables, even when you know that they are not new.  Divide into 2 scripts: one called ask_and_describe_table.sql, which looks like this:

    -Ask_and_Describe_Table.sql

    accept invites owner "Enter table owner:

    accept invites from TABLE_NAME "Enter object (table/View...) "name:"

    -You can use any name path instead of d:\some_dir below:

    @d:\some_dir\describe_table & owner, table_name

    and the other one called Describe_Table.sql, which starts like this:

    -Describe_Table.sql

    DEFINE owner = & 1

    DEFINE table_name = & 2

    column owner format a10 column 'owner '.

    ...

    and continues with the same exact content as validate_table.sql.

    Now, to write another script (I'll call it Describe_Recent_Tables.sql):

    -Describe_Recent_Tables.sql - create and run Describe_Many_Tables.sql

    -Turn OFF the devices designed to help people to read the output:

    SET ECHO OFF

    SET FEEDBACK OFF

    SET PAGESIZE 0

    VERRIFY OFF SET

    -Create a Describe_Many_Tables.sql:

    COIL d:\some_dir\describe_many_tables.sql

    SELECT ' @d:\some_dir\describe_table '

    ||      owner

    ||      '  '

    ||      object_name

    FROM dba_objects

    WHERE object_type in ('TABLE', 'SEE')

    AND owner NOT IN ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN")

    AND last_ddl_time > SYSDATE - 1;

    SPOOL OFF

    -Features lighting designed to help people to read the output:

    SET ECHO ON

    SET FEEDBACK ON

    SET PAGESIZE 50

    SET VERRIFY ON

    -Describe_Many_Tables.sql performance

    @d:\some_dir\describe_many_tables

    I guess that all of your tables have standard names (for example, start with a letter, no spaces in the name,...), which don't require quotation marks.  If they could, then the same basic approach will work, but the details are a little messier.

    When you want to see the information on a single table or view, no matter how old it is, driven

    Ask_and_Describe_Table

    or, if you do not need to question the owner of the table and the name, something like

    Describe_Table SCOTT EMP

    (You can find that you really need not Ask_and_Describe_Table.sql).

    When you want to do this for all the tables created in the last 24 hours:

    Describe_Recent_Tables

  • Question about how 'First' makes the sequences

    Hi all

    I have a small question. I have a calendar in which I placed a transparent video with a timecode effect thereon for the purpose of lining of the stuff. I turned the visibility of it, but I wonder if I should remove it before as I give to improve the rendering time. First will interfere with him or she will calculate that it is there as an object for "invisible" also?

    This may sound really stupid to ask, but I'm learning how to be as effective as possible in my workflow and if first does not care that it is because he is disabled, so I'd be inclined to let incase I need it again, but if she would accelerate rendering my project then I would take it before my final DVD build I intend to publish.

    Any thoughts?

    Premiere Pro makes that material visible. So feel free to leave there with visibility turned off.

    Edit: to prove to yourself, add an effect to transparent video which causes the rendered line go red. As a"camera view". Die the eyeball and the Red goes. Make sense?

  • Questions about how to avoid the "while OTHERS"

    Hello

    I am currently teaching myself PL/SQL. I have the script according to which uses SO that OTHERS (not a good thing):
    undef sv_student_id
    
    declare
      v_student_id          student.student_id%type  := &sv_student_id;
      v_total_courses       number;
    
    begin
      if v_student_id < 0 then
         raise_application_error(-20000, 'A student ID cannot be negative');
      end if;
    
      exception
        when others then
          dbms_output.put_line('Got an exception');
    end;
    /
    When I run the above script and enter the value - 10 when prompted, I get the following output:
    SQL> @213c
    Enter value for sv_student_id: -10
    old   2:   v_student_id          student.student_id%type  := &sv_student_id;
    new   2:   v_student_id          student.student_id%type  := -10;
    Got an exception
    What leaves to be desired (like a better message ;))

    The questions are:

    1. How can I get the outer exception to display the error message specified in the raise_application_error instead of a generic message (such as 'Got to exception')?

    2. I want catch exception using something specific, like "when-20000 then" (which does not), instead of the Tote so "than others'.

    Thank you for helping,

    John.

    Published by: 440bx - 11 GR 2 on Aug 14, 2010 08:01 - plural for questions

    1)

    undef sv_student_id
    
    declare
      v_student_id          number  := &sv_student_id;
      v_total_courses       number;
    
    begin
      if v_student_id < 0 then
         raise_application_error(-20000, 'A student ID cannot be negative');
      end if;
    
      exception
        when others then
          dbms_output.put_line('error_code='||sqlcode ||', error_message='|| sqlerrm);
    end;
    / 
    

    2)

    undef sv_student_id
    
    declare
      v_student_id          number  := &sv_student_id;
      v_total_courses       number;
      my_ex exception;
      pragma exception_init(my_ex, -20001);
    begin
      if v_student_id < 0 then
         raise my_ex;
      end if;
    
      exception
        when my_ex then
          dbms_output.put_line('my catch!');
    end;
    / 
    

    and maybe, that

    undef sv_student_id
    
    declare
      v_student_id          number  := &sv_student_id;
      v_total_courses       number;
    begin
      if v_student_id < 0 then
         raise_application_error(-20001, 'A student ID cannot be negative');
      end if;
    
      exception
        when others then
          if sqlcode = -20001 then
          dbms_output.put_line('-20001 message');
          elsif sqlcode = -20002 then
          dbms_output.put_line('-20002 message');
          ...
         end if;
    end;
    / 
    
  • Very basic question about how to speed script CLEARDATA.

    CLEARDATA:
    ========
    Hi there, the two scripts will cause the same, but the following, which is faster (1) or (2)? Assuming that the data and the same sets for each. Thank you!


    CACHE ALL TOGETHER;
    SET CACHE HIGH;
    SET AGGMISSG
    SET HIGH LOCKBLOCK;
    SET CALCPARALLEL 4;
    UPDATECALC OFF SET;

    (1)
    DIFFICULTY (& InitPeriod: & ActualPeriod, & ActualYear, & CalcScenario, "WorkingInput")
    @IDESCENDANTS ("business district"), @IDESCENDANTS ("CC"), Fix (@IDESCENDANTS ("Entity"), @IDESCENDANTS ("Product")) <-sparse Dimensions
    CLEARDATA "USD";
    ENDFIX
    ENDFIX
    CLEARBLOCK VACUUM;


    (2)
    DIFFICULTY (& InitPeriod: & ActualPeriod, & ActualYear, & CalcScenario, "WorkingInput")
    CLEARDATA "USD";
    ENDFIX
    CLEARBLOCK VACUUM;

    CACHE ALL TOGETHER;
    SET CACHE HIGH;
    SET AGGMISSG
    SET HIGH LOCKBLOCK;
    SET CALCPARALLEL 4;
    UPDATECALC OFF SET;

    DIFFICULTY (& InitPeriod: & ActualPeriod, & ActualYear, & CalcScenario, "WorkingInput")
    DIFFICULTY (@RELATIVE ('entity', 0), @RELATIVE ("Business Area", 0), @RELATIVE ('CC', 0), @RELATIVE ("product", 0))
    CLEARDATA "USD";
    ENDFIX
    ENDFIX
    CLEARBLOCK VACUUM;

    Fixing Level0 blocks like the above calc data erasure
    Loading new data
    Setting the update rollup on Aggmissing
    The Total process takes less time compared to
    Deleting the data for all levels
    Loading new data
    ROLLUP

  • Help: question about how to wirte even drop into two sub vi

    Open a file in a Subvi wirte and read the attribute, stick to open and wirte data.

    When I open this file in an another Subvi with write and read the attribute and write data into it too much, the operation

    also managed. Is this fair? I thought of one of the Sub - VI reports error when trying to access an open file.

    But all two Subvi occur in the file. I have attached my Subvi, it will be copied and made into a main vi to run.

    Please correct if any error and explain the results of my test.

    If you want to check the value of the file manager, what tyep of data should be used?

    Thank you

    BR,

    If you want to avoid that other screw open a file with a different RefNum you insert Access.vi deny the palette of advanced file functions. You can choose if read, write or both actions are denied to the other refnums, screws or applications.

  • I got a partial answer to my question about "how to delete emails from the Inbox in Outlook Express. Can I track my original request with a follow-up of the issue?

    Thank you very much for your answer.
     
    Outlook Express is listed on the Start button.  Following your instructions,.
     
    I clicked on start, Control Panel, Folder Options/view.  Point of view, a list of Options have been posted and some have been checked, including 'display the hidden files and folders '.
     
    I do not know how to find Inbox.dbx.  I still find 41 messages in the Inbox, 78 in the deleted items and 14 in mass mailings.  When I click on "remove" messages, I get a message - "the server is not found. In addition, unable to poll for new messages on your HTTP server.
     
    "I uncheck" "include this account" so then, I probably is no longer get emails in Outlook Express.  My hard drive is pathetic looking.  I find a small "Ribbon of pink pie (unused space) and in the rest of the cake shape is 'BLUE'.  I thought that E-mails from Outlook Express can be responsible for my hard drive being so full. After I empty all these junk emails in 2008, I have to know what else I can remove to open more space on my hard drive.
     
    Thank you for your patience and for your help.
     
    Edie
     

    After deleting messages in OE, go to file | Folder | Compact to reduce the size of the folder.  Otherwise removal does not affect the size of a folder.  You should probably go to file | Folder | Compact everything to reduce all sizes of folder in OE.  I would like to make a backup first.

    For more free space on your disk, click Start | Programs | Accessories | System Tools | Disk Cleanup.

    It is not best to start a new message when you are tracking on another, because nobody knows what you're referring to when you the previous thread.  I managed to find it well and Bruce said: ' tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run '.

    Steve

  • Question about how much money is deducted

    For every $ 100, I was wondering how much actually ends up in your PAYPAL account after all deductions?

    70% of $100...

Maybe you are looking for

  • Question about the Satellite Pro M40X upgrades

    I bought it about 10 months ago, it works well, but now I have two questions: (1) the original 256 M RAM, I will still add a 512 m? (2) the original operating system is in Czech language, can I get an English recovery DVDs?, because I'll go to anothe

  • SMS problem

    I can not send SMS... When I try I, it sends only the first letter of my message. I'm doing something wrong? Help, please

  • A15 8982 Thinkcentre M55 pc with win xp sp3

    I have an audio problem. All devices work & drivers are updated, but when I plug my headphones in front the sound is still audible from the pc - I cut back decision-making. I fiddled with the audio controls / properties does not. I can't play audio o

  • learning of the problem

    Why my computer denies me access to the removal tool with my printer one that happened to my on my desktop dell dock

  • TravelMate 5742G: restarts continuously

    Hello My Travelmate 5742 G i5 460M restars continuously. I try own funs but after a few days problem returned once again. Now, if I want to work just need to use external fun but it isn't possibible working in this condition. I can't use my travelmat