update caused my printer stop printing

Similar Questions

• "Laserjet 1022n Windows Update", causing problems printing: print jobs do not print

  Hello

  A few days ago I installed upgrading Windows Laserjet 1022n on my Windows 7 64 bit and since then I can not print a page normally: the page does not print. I use a TCP/IP network port.

  I made several attempts to resolve this problem:

  -uninstall the printer driver and install it again (I tried the latest version on the HP site and an older one that worked perfectly before)

  -update the firmware of the printer to the latest version on the HP site.

  When I put the printer in pause and start the print job, you can see in the list. Resumption of the printer, printing starts on the printer but you see that the job remains in the list, flashes again and again. The printer keeps printing the same page.

  I don't know what I can do to solve this problem. There is no way to uninstall the update of the HP Laserjet 1022n software because it does not appear in the list of installed programs (course list is also op updates from windows updates).

  I have same problem printing to the same printer from another PC Windows 7 (with the same windows update done)

  But I have no problem printing with my laptop on an other network printers.

  Is there someone who has the same problem and how to solve?

  Thank you for answer

  I found the solution on this site: http://www.tomshardware.co.uk/forum/59912-29-1022n-printer-stop-printing

  Just uncheck the chekbox "enable two-way communication" on the "Ports" tab of the properties of the printer and it works normally again!

• each update causes coupon printing problems

  I need a version of firefox that does not affect my coupons. whenever I update, I print coupons of issues from various sites.

  Thanks, John99, I'd be happy to. According to the forum, some are more sensitive than others about what you can post...

  We are still doing our site compatible with all web browsers 64 bit and that could be a problem for many of you. If you are using Windows 7, 64-bit, try to launch the iexplore.exe (supplied with Win7 32-bit browser) and use to go to coupons.com and try printing. The other thing that you want to make sure you do is check to see if the coupon printer is enabled in your browser. In Firefox, click on tools, Addons and Plugins and look for the coupon to make sure printer is) 2 active and 1) installed in the browser.

  I'd be happy to help you directly, if someone is having these problems of compatibility. Please send an email to [email protected] with your details and one of our engineers will be happy to join you.

  Thank you
  Greg
  Customer support
  Coupons.com, incorporated

• Office Outlook 2007 SP2 update caused Outlook to stop working! Help ASAP!

  Lasst night I allowed Microsoft to form automatically an update to Office Outlook 2007 SP2, and today I've been unal use Outlook at all.  Only, it freezes and stops runing now fantasies I ry to open it!  Plase difficulty this mess stinking!

  Hi Karen999,

  Thank you for using the Microsoft Answers forum.  You can restore your system using restore points.  Chose a day before installing updates.

  Use the system restore feature:

  1. click on Start, type System Restore in the Search box, and then click System Restore under the programs section. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  2. on the System Restore page, click Next.

  3. Select a restore point during which you know the operating system works, and then click Next.

  The restore point should be a date that precedes the first time you experienced the problem described in the Symptoms"" section. To select a date, use the option to choose a different restore point , and then click Next.

  4. If you are prompted for the disk to restore, select the hard disk on which the operating system is installed, and then click Next.

  5. in the confirm your restore point page, click Finish.

  6. when the restore process is complete, click restart

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• September 2014 Windows Update caused Aero to stop working (Asus Win 7 machine)...

  As a result, I had to perform a restore of the system after each of the two windows updates to get Aero back again once... How it can be stopped with future updates of windows?  Can someone explain MS that it is the reason why they have lower market share... I need to use my machine. MS, be responsible.

  Hi Eric,.

  Sorry to know that you are facing this problem.

  • The problem with aero solved after removing the KB KB2928562?
  • This update has been successfully installed?
  • Were there updates failed?

  You can deal with this problem if the Windows Update optional for video drivers have not been installed successfully or if the components responsible for Windows update didn't work properly during the update.

  Following the troubleshooting steps suggested in this Microsoft article and check if this can help, try.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• June 2010 update messed up printer USB - internet connection

  Installed the recent Vista Update June 18

  Now cannot use the printer on USB and connect to internet - wireless adapter on another port at the same time.

  Use the Internet or print, but may not have connected printer and function of the wireless adapter.

  Check that this latest driver is enabled for both devices?

  Microsoft has a solution?

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve it:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Update Firmware on printer C410

  Printer is on wireless and works very well for all applications.  Tried to activate ePrint and it displays the message "there was a problem connecting to the server."  Also tried to download updates to the printer and received the same message.  Any suggestions?

  I would like to try the following steps. Let me know how it goes.

  1 obtain the IP address of your printer
  a. This can be done by pressing the icon on the printer wireless.
  2. Enter the printer's IP address in a browser.
  3. Select the tab network at the top of the page.
  4. on the left, select network.
  5. Select Network (IP) address
  6. select manual DNS server
  a. manual Preferred DNS should read 8.8.8.8
  b. alternate DNS server should read. 8.8.4.4
  7. Select apply you could get a fair warning select OK.

• KB2286198 Windows Update causes Windows Live Messenger stops responding and crashed.

  After believing that my computer has somehow a virus and spend hours trying to solve the problem, I think that an update is causing the problem: I solved it by following these steps:

  KB2286198 Windows Update causes Windows Live Messenger stops responding and crashed.  Resolution: restore to before the update has been activated Windows installed updates and hid the update, so it would not automatically reinstall and the program works.  Please, difficulty of the update or rewrite it.  I can't imagine that I'm alone on this breaks.

  You will find support for Windows Live Messenger in these forums: http://windowslivehelp.com/forums.aspx?productid=2

  You can find support for the installation/uninstall/upgrade / upgrade to Windows Live Essentials in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  Note: In the not-too-distant future, Windows Live Essentials 2011 QFE2 will be a mandatory update.

• Updates to the printer

  During the update of HP printer, I get a message telling me that it is "deletion of old files.  If it's supposed to happen?  What are the files?

  MacBook Pro

  10.7.4 OSX

  HP5160 Office Jet

  Hey fsmyles,

  Looks like you have some left files on your computer by a previous installation. We will uninstall with the option 'raccoon' like this:
  1. go in Applications/Hewlett Packard / click on uninstall HP and click on continue
  2. Select your device in the left pane
  3. hold the keys Ctrl, Opt and Cmd and click on uninstall
  4. There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  5. click on continue and let it finish

  Now run a software update. This is possible by clicking on the Apple in the upper left corner of the screen, then clicking on software updates.

  Then, we will reset the printing system:

  Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  Finally, download and install the software from here.

  This should solve your problem. If not post back with new details and we will continue from there.

  Thank you!

  Sean

• Windows Update causes internet connection to stop working

  I installed the recommended Vista updates last night and this caused my internet connection, to stop working.  This has happened to both of my HP laptops.  I was able to work around this problem by going to a previous restore point but worry about future updates, causing the same problem.  Please notify.

  Hello

  Use a wired connection to download the latest drivers or download on another computer
  and transfer them to this one on removable media such as CD, DVD or USB drives.

  Control Panel - device - networks - WiFi - Manager write down of the brand and model, and then double-click
  on the drivers Tab - get the version number. Then double click on update drivers (this can do nothing
  that MS is far behind the drivers of certification). Then make a right click on the device and UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer and search for updated drivers, this will be your fallback. Then go to the Site of the manufacturer of the device
  and look for the even more recent drivers.

  Download - SAVE - go to where you put the driver - CLICK RIGHT to it - RUN AS ADMIN
  (repeat on the site of the manufacturer of the device)

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  I would also turn off AutoUpdate for drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

• Error code: 80070103 while installing optional updates for Brother printer

  I have an optional update from Windows for my Brother, update storage software released in Scanner printer

  May 2009. Published March 5, 2013.

  I tried this option of Windows Update and after a few minutes of installing the update for the

  Brother printer and Scanner STC - 197C I get an error code: 80070103

  Windows Update has encountered an unknown error. I tried to update a few times and now I really need help with this.

  The answer can reply to my email address

  Hi André,.

  According to the description, I understand that you are getting an error code: 80070103 while installing optional updates for Brother printer on your Windows 7 machine. I will certainly help you get this fixed number.

  This problem can occur because of incorrect settings or services does not properly.

  I suggest you refer to the mentioned Microsoft articles below and check if this is useful:

  Windows Update error 80070103

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80070103

   

  You receive error 0 x 80070103 when you use the Windows Update or Microsoft Update Web sites to install updates

  http://support.Microsoft.com/kb/952032

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• I can't install update for hp printer all in one remote Dungeon, is ox80073cf6 of error.

  * Original title: hp printer all in one remote control

  I can't install the update for hp printer all in one remote control. keep getting error ox80073cf6

  You need to contact HP.  They are experts in their software & hardware.

• Download of update of the printer

  I recently downloaded and tried to install an update to fix a critical pc to printer communication issue.  The only change I had made previously for my setup was an attempt to install another printer (not HP).  My printer is a deskjet 970 CSE.  The process hangs on the scrubber Dot4.  When I try to view printers in the Control Panel, I get the message that the Printer Spooler service is not running.  The Windows XP operating system.

  remove the update by going to Control Panel - Add/Remove Programs, and then restarting the computer seems to have solved the problem.  The printer now prints and the update no longer appears in the list when I'm looking for updates for this printer.

• receive a problem caused windows to stop working, will notify you if a solution is found. Display driver igfx has stopped.

  the computer, ups and stops working...

  on a number of occasions, I get a blue screen with a print so small, that I can't read. Receive message a problem caused windows to stop working, will advise if a solution is found. Display messages to receive driver igfx has stopped working.

  You should look at the web site of the manufacturer of your video card or monitor to see if they have updated drivers.

• A problem with your video hardware (video hardware error) caused Windows to stop working correctly.

  Product

  Windows

  Problem

  Video hardware error

  Date

  06/11/2009 19:16

  Status

  Not reported

  Description

  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem

  Problem event name: LiveKernelEvent

  The system version: 6.0.6001.2.1.0.768.3

  Locale ID: 1033

  Files helping to describe the problem

  WD-20091106 - 1913.dmp

  SysData. XML

  Version.txt

  Additional information about the problem

  BCCode: 117

  BCP1: FFFFFA8009C16260

  BCP2: FFFFFA60026F1220

  BCP3: 0000000000000000

  BCP4: 0000000000000000

  OS version: 6_0_6001

  Service Pack: 1_0

  Product: 768_1

  Hello

  BCCode: 117 is generally a problem of display driver (video) If you need to update (check the system machine
  and the sites of the manufacturer of the device. You will need to remove and reinstall your video card a PC and not
  edge. Perhaps a replacement card is necessary.

  If necessary you can perform in SafeMode with network - repeatedly F8 tap that you start.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.