Update causing error problem"ssing or 32\DRIVERS\pci.sys corrupt system"

Similar Questions

• Error System32\DRIVERs | PCI.sys

  I am running XP PRO. When I try to start, I get the error that my System32. DRIVERS\pci.sys is missing or damaged. I can't start with an OEM drive or in safe mode.

  I found the problem with my memory card. I reloaded XP and now IE is having a problem with the connection do not. Thanks for all your help so far.

• Windows Update Causes startup problem

  I have an interesting problem with Windows Update (or apparently is from Windows Update). I am running Windows Vista Ultimate 32-bit, if that info is needed. There are two updates I have not install, as I am not sure that is the cause. The updates in question are Internet Explorer 8 and Windows Defender definitions 1.63.604.0. Here's what's happening.

  When you restart after Windows updates, the computer starts with a black screen with a mouse pointer. That's all. Happened every time I tried to start after the pdates. I can reboot into SafeMode very well, is apparently a problem driver or update.

  I also installed DivX on the computer, but it seemed to work as I could watch .avi via WMP thereafter, so I excluded. I thought that if there was a problem with it, it would not have worked in the first place, but I thought it was interesting.

  In any case, the only solution I found doing a system restore and do not install updates day or DivX, since technically I don't know which is the cause. I had to restore the system 3 times already and I didn't continue to do because this computer was very expensive and I don't want to ruin the hardware or something.

  Someone knows something about an error with updates, or perhaps with DivX that may have caused this. The computer works fine without the updates or DivX, I just want to know what could be the real problem so if it is only one of the 3, I can install the other two at least.

  Change your update settings, install the updates one at a time, hide the problem:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Is IOS 9.3.2 update cause any problem on my phone?

  Is IOS 9.3.2 update cause any problem on my phone?

  What are all the specs is added to this update.

  My phone looked up crash when you receive an incoming call. This happens twice in the day.

  Can you please send back with your answer to all these questions.

  No problem causes update for devices, updates are made to overcome bugs and Yes, it is good to update your device to the latest version.

  The specifications are bug fixes and improves the security of your iphone.

  After updating your device works very well, otherwise ping - me and clarify the problem.

• system32\DRIVERS\pci.sys missing or corrupt file error but windows xp is already preloaded on computer when purchased

  missing or corrupt file error system32\DRIVERS\pci.sys keeps appearing. I had a problem with google chrome and then stop everything. This error appeared. It tells me to use the cr rom boot but xp was already loaded on the sony vaio that we bought a few years ago. I don't know what to do next because I don't want to lose the pictures and music, we have on the hard drive. Any help would be appreciated

  If your data is not backed up, then at some point that the data will be lost.

  Your Sony are delivered with a hidden restore partition or recovery disks, but I do not think that the Sony recovery allows to repair an installation of win, only pure install.

  You must remove the drive and it slave on another PC in order to retrieve the data, or take it to a decent repair shop for them to do it for you

• After installing the new hard drive and using recovery discs, I get this message could not start because the following file is m issing or damaged system32\drivers\pci.sys

  I just replaced my hard drive with a new because the other HD said imminent failure or something like that! Basically the hard drive was about to fail and I so now the new one installed and I used my recovery disks and all seemed well until the recovery disks have been completed and the computer says to get out them. Then the computer restarted several times and then I get this message:
  Windows cannot start because missing or corrupt the system 32\drivers\pci.sys
  Then he said: "you can try to repair this file by starting windows setup using the original configuration of the CD-ROM.
  Select 'R' in the first screen to start repair.
  one of the many questions I have is that CD-ROMs are talking? It is the recovery disk, they want me to or what? also if you know a CV or another page which includes help on this specific topic would also help! Thank you
  also, I can still use the old drive hard when it is installed on my laptop!
  HP pavilion dv5220us running windows xp
  I had advanced care system that had a top registry Fixer and I got ccleaner as well on the computer
  internet security Norton 2011

  Hello panjok2,

  Sometimes recovery CD are dependent on the architecture of a hard drive.  If it is different from the original disc, then we have problems.

  In this case, the best thing you could do is contact HP and see if this is the case.  If it is not why this happens, they should be able to help you as well because they are the ultimate authority on their recovery process.

  Let us know if you have any questions.

  Best regards

  Matthew_Ha

• Windows Update causing various problem on the computer

  Original title: bad update?

  11/10, I downloaded and installed updates Vista KB2641690, KB2492386, KB972971644, KB2505189. There is more, but this format makes it very difficult to enumerate. My computer is now constantly lock up, and various closed functions (Explorer being the worst).

  My computer works horribly since the update. Is there a way to reverse the updates, or should I use a fixed disc and just pray that I don't have reinstall?
  THX

  Hello

  Method 1: I suggest you to restore the computer to a point in the update got installed then install the update one at a time to determine the cause of the problem is updated:

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2: You can try to install the updates to the clean boot in order to verify if any third-party application is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 3: Try a manual install of update by downloading the update from the Microsoft Download Center:

  http://www.Microsoft.com/download/en/default.aspx

  Note: the number of the KB article in the search box to search for the update.

  Reference: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• WIn Vista for 13/12/11 updates cause startup problem

  Hello

  There was some 16 published "Windows Updates" yesterday.   After applying my Vista system would not restart until they have been regularized.

  I don't know which one caused the problem.   I guess I could let the updates from the Office product be applied again to try to limit the update at the origin of the problem.

  But do you know what is wrong?

  Larry

  Hi LarryMcMahon,

  Download the latest driver chipset directly from the manufacturer. If Windows was preinstalled on your computer, you can find the driver on the website of the manufacturer of the computer.

• Last update causing error in system memory

  I just ran the update on my iMac and have the death rotation color wheel!  The system is out of memory the application twice!

  I have an iMac 27 inch late 2009

  I can't get anything to work, and the system has installed 16 GB.  I had a similar problem with Mail eat all the memory the application when I did an update in December and now it's happening again.

  Help, please!

  Dead in the water.

  Try restarting your Mac in safe mode:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• Windows update & number error problems by e-mail: Ox80072EFD

  After the update to Service Pack 3 in October 2010, I realized recently that I have not automatic updates since even if I set up to receive them.

  When you try to find info on that error number: Ox80072EFD appears. Also, my computer becomes very slow & now my Outlook Express is getting emails ok but not displaying is not the message itself.  I think it's probably to do with not having the updates appropriate for the last months 14 - help!

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/is-Windows-Update-not-compatible-with-ie9unable-to/7becf1a0-0868-416e-8e7e-121c2f5e47f7>

  UTC/GMT is 12:09 Wednesday, December 7, 2011

• Windows Update Cause shutdown problem? [was: Win 7 Professional]

  Under Win7 Pro 64-bit Acer Last nite my mouse froze and I was not able to turn off the laptop. I disabled manually and I tried restarting and screen that says Win does not close properly, two options were given allow windos fix this and start earning normally. I chose an and still no start, then I choose the other (after turning it off again) and still no rebbot.

  The beginning of victory just hanged. I could then by going to F8 to get into the Safe Mode and access to a chess program that has worked well, but I obviously didn't have Internet and my anti0 virus does not. Then I tried to boot into safe mode with network and allowed me to access the net, but with my antivirus doesn't work do not. I tried restoring the system several times and got little results. Tonite while I ran this prograam of chess (not a new or recent installation of the software) and it closed and I tried to reboot and presto! My laptopseems do return to normal. Then I had Win Update telling me that I have 11 new updates that I write this are download and beinf installed. Someone told me that MS had problem this week with updates. Can anyone confirm this?

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  I appreciate your efforts to try to solve the problem.  This could be due to conflicts during the installation of Windows updates as some optional updates may also be installed.

  Check Windows story update and let us know what Windows Update have been installed recently?

  Let us know if you need more assistance. We will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• 17.0.1 update causes errors at the launch of Illustrator

  Since the last update Illustrator CC yesterday, I can't open the app as it says police Verdana must be enabled - I have the latest version of suitcase Version 5 and it is said that Verdana is activated permanently (Tahoma too, I read it from another thread here, it is activated permanently), I tried a stop and restart , an uninstall & reinstall Illustrator CC Creative cloud and again, it won't work. Any suggestions? I had problems with the activation of CC & fonts for some unknown reason, I have the latest version of Suitcase Fusion 5 I thought I could fix any problems (instead seems to have created them)

  Personified salvation & Monika,

  Embodied with the last AI CC on MAC 17.0.2 update you should not disable all your fonts. Just check that all 4 fonts Verdana family are present and enabled in the State in the system fonts folder.

  @Monika: thank you very much for sharing the thread, but this thread was more related to the problem of crash on MAC with 17.0.1 day which team has corrected in 17.0.2 update.

  Kind regards

  Rambour

• My time will not be updated, causing various problems on all kinds of things on my computer.

  It began with my time do not update automatically. When I go to the tab "internet time" to connect and update, he needs an administrator to fix it and even though I am the administrator, it won't let me, but that's another issue all together. I have fixed this before going to msconfig comand prompt and then cancellation of the registration on the server time and re-registration. This fixed for about a month, but his pass yet. I've updated to implement everything and searched tons of forums and convenience stores without getting an answer I've already tried. Help, please! I'm very limited in what I can do because of this.

  Wow, the loss of time

• Error code: 0xc0000225 - /windows/system32/drivers/vtaahjnc.sys

  As the title says I'm having HUGE problems currently. I can't get my PC to work more. The error tells me to put on the Windows Vista CD - wich in fact, I did. But surprise - if I put in the disc, nothing happens. I tried to google the problems - and now I'm really clueless. I would REALLY love if someone could help me!

  Hi Draxion,

  A. when it last work very well?

  B. recent changes made on your computer?

  C. do you have external devices attached to your computer?

  D. when exactly do you get this error?

  E. did you restart your computer after you put the vista disc in the drive?

  You can try the following steps.

  Step 1

  Last known good configuration is a Windows startup option that uses the most recent system settings that worked correctly.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Step 2

  Check if you are able to boot in safe mode.
  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  Step 3

  Try to perform a repair of the boot using your vista DVD. You must use a retail or a reinstallation disc disc to perform this step. Here is the link for the Startup Repair.

  Startup Repair: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  The last step would be to complete the restore of the system on your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  See this link: http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-Windows-wont-start-correctly

  Bindu S -Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• system32\DRIVERS\pci.sys

  I read the other stages of forum and tried several times to solve this problem, but does not have my 'Windows Professional CD' squat. It is, and for 'Refurbished PC' and I think now I need the original 'set up' that has been preloaded on the desktop when I bought it 20 days ago! Those refurbished are not the same. Is that correct and what should I do?

  Hello
  I am very happy that you are happy!
  the recovery console is designed to repair the repairable items...
  .reformatting: it is the deletion of all the information on a hard drive, redividing it is the preliminary step in total to reinstall if this post can help solve your problem, please click the mark as answer check on this page THANKS AND GOOD LUCK