Update causing the computer does not start...

Similar Questions

• CD player passes all tests but the computer does not start from cd player

  CD player passes all the tests, but the computer does not start from cd drive. entered the bios and it specifically indicate to boot from the cd drive. Windows 7 installation disc does not start. Win 7 disk works in another computer to start. Why is it not this cd player read the disc and from the win 7 installation process?

  I see this problem on systems having older IDE and SATA drives requiring firmware updates and assigned to the region 1 aka they boot from XP CD, but not DVD windows 7or media.

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• Compaq 6200 PRO MT: Makes the computer does not start after upgrade CPU

  I have the HP Compaq 6200 PRO PC of MT 615114-001 motherboard and processor Intel Celeron CPU (LGA 1155). After I changed the CPU for Intel Core i5 (LGA 1155) computer does not start. He begins a minute (less than one second) and stops again. No beeps. After you have installed the Celeron back everything works fine. i5 CPU is brand new. What can be?

  In my previous post, I explained the reason it has not worked, and listed the CPU that will work.

  HP tests CPU in the laboratory and publishes a list of processors that will work in a notebook.

  Notebook motherboard BIOS has a list of processors that will work. If it is installed, which is not encoded as OK in the BIOS ROM file, then this will not work.

  Processors published (in the maintenance guide & Service for your nttebook series model) are available in models that can be deilvered in State CTO (configured to order).

• How can I reinstall windows xp when the computer does not start and there is no cdrom/dvd drive?

  I have an Acer netbook aspire one.  It will not boot past the windows logo.  I have a windows xp disc to reinstall windows, but the computer has no CD or dvd rom.  Can I copy cd of windows xp on startup SD memory card and reinstall windows?  Or can I run connect the non working pc a working PC to access the cdrom on the work pc to reinstall windows?

  First of all, you are mistaken when you say that the PC does not start.

  This is clearly starting. The problem comes from Windows, not with the real PC. It's actually a very important distinction!

  There are methods to repair Windows, but they can be a bit tedious. By all means, follow the advice given here to do if you're so inclined.

  If you would not rather to repair Windows (and I think it's interesting a try) or your repair attempts are unsuccessful, apparently, you would need to use an external optical disc drive and follow the instructions here:

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

• The computer does not start

  What to do if my computer Win 8 does not start - the operating system was supplied with the Dell hardware. After the Dell logo at startup, it's just a black screen with a few points, dropping in a circle (System busy)

  Hello

  Are you aware of any material changes or software on the PC before this problem?

  Video card problems are the most common cause of the problem of black screen.  In this issue, we do not know what driver update is causing the problem.

  Disconnect all external devices (except keyboard and mouse) connected to the computer and check if it helps.

  We will try to start the computer in mode low resolution and check the issue.

  Low resolution starts Windows using your current video driver, and using the parameters of frequency low resolution and refresh.

  To do this, please follow these steps:

  a. boot Windows 8 media.
  b. After selecting the parameters of your "language, time and keyboard', click 'Next' to load the next window, then click the"repair your computer ".

  c. you should then presented one choose a screen of the Option, with "Troubleshooting" option.

  d. click on 'Advanced Options' and click on 'start parameters.

  e. click "Restart" and choose option 3 to switch to low resolution mode.

  Refer to the section:

  Turn on the video resolution (640 × 480)

  If you are able to start low resolution mode, then perform a restore of the system and check if that helps.
  Restore your PC to a closest in time

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Let us know if it helps. If the problem persists, we will be happy to help you.

• How to go in safe mode on Windows 8, if the computer does not start?

  Recently, my computer won't start, suspended to the start screen. In order to diagnose certain things, I need to get through safe mode. In earlier versions of Windows, I'd use F8 to get in. However, this is not an option in Windows 8. How would you like to do in safe mode on Windows 8 if the operating system does not start?

  Hello

  This gives a try... sometimes it will not work with multiple partitions of hard disks installed because it looks like bad... It might work from a repair also disc...

  1) start from the Windows 8 DVD
  2) click Next
  (3) select repair your computer

  (4) select troubleshooting
  (5) select Advanced Options
  (6) select command prompt

  (7) type - Bcdedit/set {bootmgr} displaybootmenu Yes (note the spaces)
  (8) type - out

  (9) restart

  (10) to the start screen, select F8
  (11) to select Safe mode with networking

  This can then be turned off when you are finished.

  (1) run by the lower left corner (Admin) command prompt right-click when Start appears.

  (2) type - Bcdedit/set {bootmgr} displaybootmenu not (note the spaces)
  (3) type - out

• Unfinished system recovery - the computer does not start

  I have a laptop Packard Bell EasyNote who was running slowly and decided to do a restore of the system using a restore CD I created for it (no disc has been provided by the vendors, some instructions on how to create a). In order to start from scratch, I decided to do a full restore, which means wipe the existing drive. I booted from the restore CD and everything seemed to go well until part way through it asked me to insert disk 2. I don't have one of the drives. Now, the system does not at all - it comes up with an error that BOOTMGR is missing and hangs up. I don't know what to do now. I tried searching for downloads on the site of PAckard Bell, but apparently not my particular model from the list. I tried to look on the Microsoft Web site, but it does not seem to recognize the product identifier on the Microsoft label on the base of the laptop. I don't know what to do to recover a working laptop.

  I have a laptop Packard Bell EasyNote who was running slowly and decided to do a restore of the system using a restore CD I created for it (no disc has been provided by the vendors, some instructions on how to create a). In order to start from scratch, I decided to do a full restore, which means wipe the existing drive. I booted from the restore CD and everything seemed to go well until part way through it asked me to insert disk 2. I don't have one of the drives. Now, the system does not at all - it comes up with an error that BOOTMGR is missing and hangs up. I don't know what to do now. I tried searching for downloads on the site of PAckard Bell, but apparently not my particular model from the list. I tried to look on the Microsoft Web site, but it does not seem to recognize the product identifier on the Microsoft label on the base of the laptop. I don't know what to do to recover a working laptop.

  Hey Pete Skett

  problem with the packard bell recovery media, or how it was made by yourself you will need to contact them for support

  It's their recovery process and the media

  http://IL.PackardBell.com/PB/en/IL/content/support

  I suggest that you ask them to send you a set of vista recovery disks that they should have for a nominal dollar cost and also ask them if you have a recovery partition on your hard disk to perform a recovery to factory standards

  If you have a recovery partition, it will save you money

  You can press F11 on startup to see if you can enter the recovery partition recovery process, if you still

  Ask packard bell for the correct key sequence

  Walter, the time zone traveller

• P6-2009it: the computer does not start after you install a new videocard (msi Gtx 960)

  Intel Core i3-2120 Socket H2 (LGA1155)

  Foxconn Intel H61 2ABF (Cougar Point)

  P6-2009it

  Power supply - corsair CX500

  Do not run the single image windows start and all. I can't go anywhere, WHAT BIOS is not also responsible.

  Right now is the radeon hd 6950 2 GB video card.

  BIOS updated to the latest version 7.16 - has not helped

  remove the previous video card driver - has not helped

  I leave the battery on the mother 10 minutes card - has not helped

  Nothing helps, what's the problem?

  Hirurgrrr, welcome to the forum.

  The problem you are experiencing is caused by the fact that the GTX 960 requires UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  The last series of video cards that does not need UEFI is the GT 640.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Uninstalled McAfee, now the computer does not start - crashes at MUP. SYS

  Hi new to the forums here - I'm pretty desperate at this point - here's the game:

  I guess that the problem lies with the uninstall - never had any problems before and did a reinstall of fees<1 year="" ago. ="" computer="" is="" only="" used="" as="" htpc="" and="" occasional="" web="">

  McAfee, asked me to reboot after uninstall so I agreed.  I assumed that I would run the McAfee removal tool once the computer has been restarted, but now my computer freezes right on a black screen after the initial startup.  When I boot in safe mode, the computer hangs on the last file MUP. SYS.  I have left on all night, still will not get past the MUP. SYS

  I have run chkdsk and found 0 errors.  I also followed the indications of MS here: http://support.microsoft.com/kb/307545 does not.  I used Hiren boot and back up my data.

  Running XP MCE 2005 cumulative 2 - SP3.  The computer is a Sony Vaio - so I did not have a full XP disk, only the recovery discs (thanks to strip sony!).  I downloaded a copy of the recovery console which I can boot to.  Is there a way I can run the MCPR.exe since the recovery console?  What else could be the cause? Thank you very much!

  PS I also unplugged all devices except for my keyboard and mouse.

  Unfortunately I do not know which files to delete McAfee.  I guess there could be hundreds of them.

  I sincerely apologize for bad reading you post. The problem was more than likely caused by the process of uninstalling McAfee. Hang up on MUP. SYS actually has nothing to do with the Ministry of the INTERIOR. SYS file. It is simply the last file loaded by windows when an attempt to start in safe mode has been selected. There are a number of issues that can cause this error. As I said above, in your case, it was likely to McAfee.

  Follow the instructions below carefully to perform a restore of the system using Microsoft Diagnostics and Recovery Toolset (MSDaRT). You will need a computer to work with a working cd rom and a dvd/CD blank.

  Download and install ISO Recorder version for the operating system of the non-working computer to work.

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download and install the Microsoft Diagnostics and Recovery Tool to the work computer from the link below, choose the default installation during Setup.

  http://www.Softpedia.com/progDownload/Diagnostics-and-recovery-toolset-download-100885.html

  CD blank insert in your cd/dvd burner. Navigate to C:\Program Files\Microsoft Diagnostics and Recovery Toolset and right click erd50.iso, select and then copy the image to a CD . Follow the instructions in this link to complete the creation of the bootable cd.

  http://isorecorder.alexfeinman.com/HOWTO.htm

  Once completed, restart the PC with the cd in the drive and start over the cd to verify that it works correctly. If successful in the computer non-Boot.

  Boot with the cd and when prompted, connect to the operating system (should show C:\windows).
  

  Once connected, click Start > system tools > system restore
  The interface of the system restore opens where you can choose to restore the system to an earlier time.
  

  Select the restore point, follow the guests and restart when prompted, remove the cd during the reboot.

  Kind regards

  Joel
  

  Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• Pavilion HPE h8-1330z CTO: video card dying fan, tried to replace the card, the computer does not start

  This Pavilion comes preinstalled with a nVidia GeForce GT 630 graphics card. The fan on the card goes bad - the card smells "burny" when I run, the fan works really hard and the computer crashes while playing graphics-heavy games.

  I tried replacing a PNY Verto GeForce GT 730 2048 MB DDR3 card. But now, with the Verto installed, my flag starts, it crashes just on the HP splash screen. I can not start safe mode nor can I access the BIOS settings.

  Care of the Verto seemed to think it would work in my Pavilion - PCIe 2.0, at least 300W PSU. I searched online for help but can't find a solution for my problem.

  Any tips?

  I checked the support page for my Pavlillion and I noticed a updated driver for my computer's BIOS. I installed and it seems to have solved the problem.

• HP Pavilion G6: The computer does not start

  My computer won't boot from the system menu. It is said the last attempt to resume the system from its previous location failed. It gives me the possibility to remove restore data and switch to the system boot menu by clicking on enter, but when I do, it does nothing. Can someone help me please? Thank you

  Start using your recovery disk, if you don't have not only you can buy one at HP.  Looks like your windows is corrupted and will need a re - install.

• How can I find the suspended process when the computer does not start?

  My friend (Vista Home Premium x 86 SP2) of start-up computer is more completely on its own.  I can start safe mode, and it will start successfully if I hold down the SHIFT key during startup.  I tried to disable all non-essential services and programs from starting with MSCONFIG.  I thought about allowing the boot logging, but am unsure if this will give me any useful information.  What is the best way to determine where the boot process is suspended?

  Hello

  I suggest that you try to perform the boot repair and check if this can help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  I also suggest to try a startup repair.

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• Satellite A300 - Vista does not load, the computer does not start

  Satellite A300
  Model number: PSAGCA-02W010

  Vista won't load; have you tried to start repair; System Restore and boot in safe mode, none of them work. I get the error "error 0 x 80070570: the file or directory is corrupted and unreadable."

  I don't know what I did with my recovery CD; or if I even got one with my purchase (from Harvey Norman).

  Please tell us what can be done.

  Hello

  What you can try is to install Vista using disk HARD recovery option.
  How it works, you can read on http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  If it works all the data saved on the C partition will be deleted but the data saved on the D partition will always be there.

• Computer does not start, the registry is damaged. What should I do?

  Original title: I have a computer gateway running vista home. The computer does not start and system repair fixed. The error is the root cause "registry is corrupt. What should I do?

  My system stopped responding and I had to make a hard stop.  When I tried to restart the computer, I had a mistake of lying to start automatically.  Commissioning and repair screen came and did his thing.  He was not able to solve the problem. The end result was an error indicating that the registry has been corrupted.  What should I do to get my computer running again?

  Hi Laurayne,

  You can read the following article and try to boot from the disk Installation of Windows Vista to perform a restore system from Windows Recovery Environment.

  What are the system recovery options in Windows Vista?