Update/change the firmware on a Camileo P30

Similar Questions

• How will I know if the update of the firmware which is due a minuite was released?

  How will I know if the update of the firmware which is due a minuite was released?

  And how do I know the improvements and stuff?

  Thank you

  SR

  SR - rox wrote:

  How will I know if the update of the firmware which is due a minuite was released?

  And how do I know the improvements and stuff?

  Thank you

  SR

  The new firmware is displayed in the thread to update the Firmware Sansa Fuze, which will be reset and cleaned. The change log will be part of the first post in this same thread. In addition to this it will be impossible to miss. People will speak on this subject.

• Tecra A10 - 1GW (PTSB1E) - update of the firmware & chipset failed

  Hello!

  in fact, I have two problems on my laptop (32-bit) windows 7:

  Burning programs do not find my burner (called 'MAT * a DVD-RAM UJ880AS' Device Manager) and even the [update of the firmware | http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory = 2 & selFamily = 5 & selSeries = 155 & selProduct = 809 & langua ge = 17 & selOS = 29 & selType = 50 & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 12 & 1 7 = selectedLanguage & type = 50 & page = 1 & FROM = windows7 & ID = 68407 & DISO =-1 & driverLanguage = 42] cannot [find him | http://img705.imageshack.us/f/fehler2.png/]. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  Internal burning function Windows works _sometimes_ and disc playback as usual.

  Chipset driver updat doesn't work.
  The [error message: http://img827.imageshack.us/f/fehler1.png/] said 'requirements for the installation of this software is not met. the installation program is abandoned.
  I don't know, I chose the right driver.

  All attempts have been made under administrator rights and disabled antivirus.

  Thanks for help
  Tablerocker

  p.s.: the windows shortcut (just the shortcut!) + e works, too ([unknown error | http://img137.imageshack.us/f/fehler3.png/]). but I don't think it's a problem toshiba ;-)

  > Burning-programs do not find my burner (Device Manager named him "MAT * a DVD-RAM UJ880AS") and even the firmware does not find it. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  What is the status of the STRANGE in Device Manager?
  Are there any yellow exclamation marks?

  I recommend you remove/clear the STRANGE since the Device Manager.
  Then start the registry and delete the upper and lower registry key filters:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, restart the device. Windows should recognize the STRANGE again.

  Regarding the driver chipset;
  The A10 - 1GW supports the Chipset mobile Intel GM45 Express.
  http://www.Intel.com/products/Notebook/chipsets/GM45/GM45-overview.htm

  If you use the driver from the Intel page, then you should try installing the chipset in Device Manager. This allows to force Windows choose the driver Intel

• Can I reset the update of the firmware on Qosmio G20?

  I have a Qosmio G20 and I think that something was wrong when I updated the firmware.
  Now, I have no operating system. Is it possible to reset the firmware?

  Type of CD-rom is MATSU * A UJ-846-C

  Hello!

  Why you don t have an operating system if you have updated the firmware?
  I'm a little confused on this, because the update of the firmware doesn t affect the HDD m functionality

  That you get an error message before you try to start in Windows?
  If not try to load the defaults in the BIOS as athan1001 said and please give us more details.

  Good bye

• If this isn't the case, juggling with the updates of the Firmware installation will be updated install all prerequisite updates?

  I am currently using a Netgear WNR2000v3 wireless router. I've never installed the Firmware/Software updates. If I install the latest update of the Firmware/Software

  (Firmware Version 1.1.2.10), this includes all previous updates or do I return completely and install the updates of the Firmware/Software in the order in which they were made?

  Just the last one will do.

• When is the next update of the firmware

  When is the next update of the firmware?

  The only person who visits these boards who knows is not. All we know for sure is that we must get out before the end of the first quarter of this year, both at the end of March.

• Hi my name is LukaszT I would like to know if there will be an update of the firmware Linksys WRT54G2 v1

  Hi my name is LukaszT I would like to know if there will be an update of the firmware Linksys WRT54G2 v1.  I don't see any of the firmwares in the list of downloads

  There is a firmware (version 1.0.04)is) available on the site Web of Linksys router WRT54G2 V1.

  Follow this link and check the firmware available. Select the hardware version 1.0 V.

• What is caught after an update of the firmware

  I want to put the firmware on my router. I want to assure you once I have install the firmware I restore some settings. If I do a backup of the settings before upgrading the firmware and then restore the settings after that the update of the firmware will be the WEP key and SSID be restored?

  Thank you.

• Try to download an update of the firmware with a file extension ROM Vista says it's an unrecognized file type

  Title: download original ROM files on Vista

  Try to download an update of the firmware with a file extension ROM Vista says it's an unrecognized file type. Patches?

  You must get the update of the firmware that can handle the type of file the same place ROMA, you got the firmware file.  From what I see, they seem specific to the product updated. http://www.FileInfo.com/extension/ROM if they don't have it, talk to their technical support staff and ask them what type of program is required to install the firmware provided in ROM format and where you can get it.  Vista doesn't have the ability to read a file ROM type  Some software must be added to give this capability.

  Here is an article I read: "various hardware upgrades and emulators use the ROM file extension." A user needs a flash program usually available on the website of the manufacturer of the motherboard. The user must not flashing BIOS unless the user knows that he has the image of his mother. An error or the computer may be turned off when the wrong BIOS image is flashed. "So be very careful here, or you can completely disable your system.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Huh? "Remote Control Panel" came with the update of the firmware, LaserJet P4014n

  I have 3 Laserjet P4014n recently updated to firmware 20140127 04.210.5.  If I use EWS log in as local administrator I see there's a new entry on the tab named "Remote Control Panel. I'd love to see what he does, but I can't.

  With the help of IE11, I click on 'Remote Control Panel' and receive a alert 'ActiveX settings are required to use the remote control panel. There is an 'OK' button below this alert. By clicking on the button 'OK' makes me a "sorry, unsupported browser.

  I fooled with my settings ActiveX IE11 and not got anywhere. The documentation for the update of the firmware is vague.

  Can someone tell me what is this new feature of 'Remote Control Panel' intrigueing?

  Answering my own question:

  A couple firmware updates, this EWS feature has been removed from my P4014n printers but added to my printers LaserJet Enterprise M601n.

  I dropped the past months trying to understand what he's doing since clicking on it never did much. But today, I accidently clicked on 'Remote Control Panel' and got a double chart of the front of the printer with all the buttons (OK, up/down arrows, red X, home, back and a numeric keypad). There is also an option "restart".

  It's very cool like SAP M601n does not in any way to simply cancel a job stuck in the queue. I was remotely restart the printer.

• Update for the Firmware Cluster HA

  The default behavior of an update of the firmware of cluster HA is that it will update firstly the backup firewall, restart, failover to the backup, reboot and main firewall update.

  Is there a possibility to upgrade a SINGLE unit in the cluster to a new version of firmware, check this new version for a few days and then after the update of the other unit?

  I had a problem to upgrade from a cluster of 2 firewalls section 5.9.1.1 to 5.9.1.5. After a few hours the two firewall restarted permanently after availability of 5 minutes. Seems the best practice to check for a new version of the firmware, but I have not found a way to do this...

  This is not possible with SonicWALLs, because both the SonicWALLs running must be on the same firmware. Only way to do something like that, is to break the link HA and activate one of the SonicWALLs off and by default after the test.

  Thank you
  Ben D
  Reference Dell SonicWALL

• A statement UPDATE changes the line if the update changes the column even value?

  HI -.

  I have a main classification and the corresponding audit table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

  Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time. He is not able to determine that the value is the same.

  My goal is to load the audit table data if the value in a cell in the main table is really have changed.

  A statement UPDATE changes the line if the update changes the column even value?

  Best regards

  I have a main Table and the corresponding Audit Table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

  Why?

  You try to resolve what made you what are the PROBLEM that select as the solution?

  Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time.

  Yes - it is EXACTLY what you say that you wanted to do and EXACTLY what the code does in this article.

  He is not able to determine that the value is the same.

  I think you mean that the code does NOT check if the value is the same. You can certainly change the code to do this check. But I have a question to start with your need for such a solution.

  My goal is to load the audit table data if the value in a cell in the main table is really have changed.

  OK - then modify the code to check EACH COLUMN and compare its NEW value to the OLD value and insert only the table of audit if SOME (or columns you care specifically) have changed.

  A statement UPDATE changes the line if the update changes the column even value?

  It depends on what you mean by 'change the line '. Of course to update a column with the SAME value does not change the resulting data value.

  But the physical structure of the line, the location of the pieces of line and information in the header block (YVERT, etc.) will change. And, as others have said Oracle doesn't know and doesn't care, so if the new value of a column is the same as the old value will create redo, undo and the rest.

  Start over and tell us what PROBLEM you're trying to solve. Then we can help you find the best way to solve it.

• Update of the firmware/BIOS using OME and iDRAC

  Small question. If I update BIOS and firmware (for example, NIC) OME aid via the iDRAC, is whatever it is must be done on the server first? I have several new ESXi R720s that I need to update. They do not run virtual machines (they were not configured/implementation yet), but they are turned on and are the basic login screen with ESXi. My understanding is that the iDRAC will do everything in the background and then just restart the server once it's over, so the only downtime is when restarting. Is this correct?

  If the situation changes and servers have put VMs in place, something needs to be done before I run the OME system updates? IDRAC is all discovered using WS - Man.

  Thank you.

  Hello

  Yes, your interpretation is correct. You don't need to do anything on the server. But make sure that the required ports are open between OME and iDRAC when you perform the update system via iDRAC.

• The update of the firmware bricked just my time capsule.

  I followed the prompt to update the firmware today and I got a 'did not finish' message type. (I don't remember what it was because I just clicked on past)

  'The airport' (which is my Time Capsule) is now Undiscoverable. I rebooted all the usual culprits (router, computers, time capsule) and did a hard reset on the time capsule itself, but still can not find airport utility "" my TC.

  Now, I'm stuck in a dystopian nightmare of the 1980s with all the promises of technology and yet none of its features.

  Help!  (I write from my phone. A device that I've recovered from the future)

  I rebooted all the usual culprits (router, computers, time capsule) and did a hard reset on the time capsule itself, but still can not find airport utility "" my TC.

  If you Hard Reset the TC, it is normal that AirPort Utility cannot find the TC... given that AirPort utility displays only devices of the airport that have already been configured.  The TC is not configured, so it's a Station of Base AirPort "nine" with the default settings.

  Start over and set up the TC to help "Assistant" Installation of Apple on your Mac or your iPhone / iPad.  After the back if you need some advice on this.

• When I restart my iMac (10.11.3), I see what looks like an update of the firmware (black screen with progress bar). It happens every time. How can I get rid of him?

  I've done a few things:

  (1) I checked the updates in the App Store. Nothing obvious jumped.

  (2) I tried to restart everything again. No luck.

  (3) I checked System > Library > CoreServices > Firmware updates.  It is empty.

  Not sure why it does this. But really want to stop. It makes reboot take an extra + 30 seconds, at least.

  Adam

  Make sure that you have selected to boot from the hard drive Macintosh

  How to choose a boot on your Mac - Apple Support drive