Update CPU for compaq dc5750

Similar Questions

• Updated BIOS for Compaq F700 computer laptop Windows 7 OS

  I am trying to upgrade the BIOS for Compaq F700 computer laptop F.04 to F.08 worm!

  I can do it under Windows 7 OS (the sp39468 WinFlash file is recommended under Vista environment)?

  Thank you

  Make sure that your antivirus program is disabled. It should be in safe mode, but check to be sure.

  If the antivirus program is active for a windows-based BIOS flash, the antivirus program may try to interrupt the flash 'think' a virus attacks the BIOS. A BIOS flash interrupted computer = death.

• Updating BIOS for Compaq Presario V5201US with the version of BIOS F.41

  Hello. Is it possible to update the version of the BIOS for my Compaq Presario V5201US laptop? This version is F.41

  There is a BIOS F.54 available here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3184257#n765

  The problem is this is an executable of Vista and there was problems with trying to flash executable under Windows 7 Vista if that's what you run. What problem do you think that will set a BIOS update?

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Update CPU for HP 600 g

  Hello

  I have a HP 600 b microtour (reference number: D5S31EA #UUN) with 2.8 GHz Intel i3 3220T processor and my question is if its possible to upgrade to 3.4 GHz, i3 or i5 CPU.

  Thanks in advance.

  Hi again,
  
  Have been in contact with HP chat support and the answer I have is no, I can't upgrade the processor on this unit.

• Update CPU for Satellite A100-683

  What CPU can be used to upgrade the Satellite A100-683. Currently, the Intel Core Duo T2250 was installed.

  I want to upgrade my CPU and memory. ;

  (1) what is the maximum CPU that is supported by the motherboard?
  (2) what type of CPU kan I use. Thinking about a processor Intel Core T7200 and T7600?
  (3) of memory can what type I use to upgrade to 4 GB?

  Looking forward to any thagt answer is useful!

  Hello

  In my view, given that your machine is no longer in warranty, won´t you get all the problems or the revocation of a kind of warranty when opening your machine and make some techno as work top. :)

  1. This should be the T7600 Core2Duo
  2. use the T7600
  3. 2 GB + 2 GB? ;) T
  Seriously: Try to use DDR2 at 667 MHz front side bus frequency.

  That's all, have a few questions?

  Welcome them

• Compaq 610: update RAM for Compaq 610

  For weeks, I upgraded my laptop to Windows (64-bit) 10 and my question is:

  Can I upgrade my RAM to 4 GB 8 GB whit the new version of Wndows or there is a hardware limitation?

  My current version of BIOS is F.0B

  Thank you for your cooperation.

  Josep

  Thanks for your comment

• Update CPU in Compaq Presario SR1901WM?

  Currently, I have Compaq Presario SR1901WM - with a "stock with the exception of a stick of RAM and the new pci video card e."

  The motherboard specs are here:

  http://support.HP.com/us-en/document/c00647121

  Power supply is a 250w ATX 12V and probably had to be upgraded, according to the specifications of the card, with the exception of some low-end cards that can handle it.

  http://PartSurfer.HP.com/search.aspx?type=prod&SearchText=RB063AA

  The form factor of power supply is an ATX 12V which is common and there are many available.

• CPU upgrade (HP Compaq dc5750)

  System: HP Compaq dc5750

  BIOS: version 786E3 2.22

  Hi, I recently bought a CPU AMD Athlon X 2 5000 + for my system. The current one is AMD Athlon X 2 4400 + Not much of an upgrade, I know. But I'm going to build another system so I though I would just have both, use a faster on my primary system.

  I checked in the user manual, the processor is indeed compatible with this mobo.

  So when I have the 5000 + installed it don't post, no beep and I get no signal on the screen. I went from the old processor in and everything works fine. So my question is, I have to update my bios (v2.22), the cpu is bad or is it something else?

  Let me know if you need additional information from me. Thanks, have a good evening.

  Certainly the update of the BIOS.

  Your version is 2.22 BIOS current BIOS is 2.36 Rev. Version 2.29. 7 sep 2007 added support for other processors.

• Compaq DC5750: upgrade CPU

  1. I want to do an upgrade and would like to know, now, what better processor, guys would tell me you today for this motherboard: Hewlett - Packard HP Compaq dc5750 microtour.
  2. with the same motherboard, memory can put in each slot? And what is the highest frequency support?

  Hello

  The following document will all tell you:

  http://WWW8.HP.com/h20195/v2/GetDocument.aspx?DocName=c04287270

  Kind regards.

• COMPAQ 510 T1500 1.8 GHZ: CPU UPGRADE FOR COMPAQ 510 T1500 1.8 GHZ

  Hi, I want to improve my laptop cpu but do not know if the motherboard supports it and what upgrade options are compatible with the motherboard chipset

  Hello

  Double post, please use:

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/CPU-upgrade-for-Compaq-510-T1500-1-8-GHz/m-p/5505032

  Thank you.

• Where I would get an update of the graphics for Compaq Presario 2000 XP driver?

  Where can I update the driver for compaq presario 2000 graphics card, windows xp?

  first of all, you must know the make and model of the card.

  If my suggestion is to download a program called "SIW".

  then in the section video, it will display the necessary information find its place of origin and download the updated driver and software.

• checking update running for hours at 100% cpu

  My daughter clicked on search for updates on his laptop under w7.  She was finally installed ok updates on 15 August.  Checking the updates worked for hours and consumes 100% of cpu.  He updated in August, is the other officer on win 7 update relevant?

  Windows 7 update problems? First read this.

  :)

• A HP Compaq dc5750 SFF PC can be upgraded to support a 3.4 ghz amd phenom II x 2 565?

  I have a laptop compaq dc5750 SFF. bought about 2 years ago. It has an AMD ATHLON processor. I want to update for AMD PHENOM II X 2 565 3.4 ghz processor. my PC motherboard can support the it? If this isn't the case, then please recommend changes.

  Thank you

  Pratik b.

  No, it cannot support the Phenom II processors and it will work without any mods that will do it.

  Frank

• Upgrading CPU for Satellite L500D

  Hi all, I have a L500D with Council nswae and AMD Athlon II m320 dual core cpu.
  I have a phenom quad core 2.2 II N970 CPU that I would install but I can't find any info about the weather or not it is compatible. It's the BIOS able to run a quadcore and if so it will overheat?
  Any help appreciated

  Update CPU is not supported and Toshiba does not provide any type of support. Toshiba offers what no info or BIOS update for these purposes.

  If nobody here can offer any help, you can try to call the nearest Toshiba service provider and ask for help.

• Update support for Realtek RTL8168/8111 Ethernet NIC (NDIS 6.0) network turns off. System needs to restore to repair.

  My system features:
  OS: Win 7
  Motherboard: Gigabyte GA-EP45T-UD3LR LGA 775 Intel P45 ATX
  Vid card: 9800GT BFG
  CPU: Intel Pentium E6300 Wolfdale 2.8 GHz
  Memory: Mushkin 4GB DDR3 1333 (PC3 10666)
  Sound: on-Board (SoundBlaster Audigy 4 installed but disabled)

  I went through the system updated with Windows 7 a bit recently, and when I installed the optional updates my network should be gone after reboot.  After several attempts to recover or even create a new Windows network is never no material at all for the network.  It can even detect my router or connect directly to the internet through my cable modem.  The only way for me new network access is back using System Restore.

  I have narrowed the question until the 60 KB update option for published Realtex network devices 11/15/2008.  I could not solve much more deep, because all processes automated are more or less useless without the support of the internet, and I did not understand how to turn off the training wheels of Windows and allow me to tinker with advanced settings again.

  Someone has encountered a similar problem and found a solution yet?  All of my updates seem to work except this one very well.  Any tips?

  Thank you.

  On a side note: I love the automation with this new version, but I'm an advanced Windows user and I would like to be able to tinker with and debug some things on my own.  Y at - it 'Advanced mode' setting for things like the Panel anywhere?  I could not find one.

  Hello

  I am pleased to have been of assistance. See the last two paragraphs here on how stop these old driver updates of
  loading, whilst on Windows updates.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, this leaves ONE of Windows updates, but it will not install the drivers who will be generally
  be older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
  Then, get new ones manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.