Update documentation suggested to correlate and CorrelateEx

Hello

I would like to have these two functions updated documentation: currently it states:

Correlate:

This function is obsolete. National Instruments recommends that you use CorrelateEx instead of this function.

CorrelateEx:

National Instruments recommends using this function instead of correlation.

However, in reality none of them are recommended because one is supposed to use the NormalizedCorrelate function:

National Instruments recommends using this function instead of CorrelateEx.

Hi Wolfgang,.

I wrote a request to the developers and they have created a demand Active Correction (CAR). So it can be corrected in the next version of the CVI at the earliest.

Best regards

SUSE

Tags: NI Software

Similar Questions

  • Update failed for Fireworks CS5 and Adobe Extension Manager CS5 5.0. Received error Code: U43M1D207. Any suggestions?

    Update failed for Fireworks CS5 and Adobe Extension Manager CS5 5.0. Received error Code: U43M1D207. Any suggestions?

    Download the update of fireworks from here:

    https://www.Adobe.com/support/Fireworks/downloads_updaters.html

    When you have downloaded and extracted the file, right click and then click on "Run as Administrator".

    This should work for you. I had the same problem and did and everything worked.

  • I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  Suggestions?

    I did a systematic update of the CC PS and PS now seems to work but the bridge is not.  I get a "CC could not update" and an error code 72.  What is the best solution?

    Thank you for your message.  I'm finally hung up with Adobe cat and after about 2 hours, the problem has been resolved.  Part of the problem was a corrupted Microsoft files.

    Ed

  • Why iTunes will sync no longer updates app on my iPad (and iPhone)?

    In the last week or so (12.3.3.17 on Win7 x 64) iTunes stopped synchronization to update my iPad Air 2 and 6 s (both IOS 9.3.1). iPhone apps  The synchronization process starts and ends without error and no applications appear also need to updates in iTunes, but my iPad (and iPhone) still show applications that need to be updated.  In the past, download the updates on my PC in iTunes, followed by synchronization, might lead to the corresponding device, and the device would show she had more applications that need updates.  I can still update applications on devices without going through iTunes, but it is more convenient for me to go through iTunes.  Thank you.

    In an effort to save space on the iOS device, Apple introduced app thinning

    https://developer.Apple.com/library/Watchos/documentation/IDEs/conceptual/AppDis tributionGuide/AppThinning/AppThinning.html

    This download only the required profile for the application of the function instead of the full application and apps are not automatically backed up on iTunes

    The update process live is also what will satisfy store app on the phone badge - making the update to iTunes isn't - as you have discovered

  • Surprise! Cannot run an update with the new assembled - and your application.

    Dear forum,

    A few days ago Microsoft released a KB update for developers, update the runtime (from 8.0.50727.762 to 8.0.50727.4053) assemblies.

    Who caused all that we have built in the last days to require these new libraries, do not perform if they did not exist.
    This caused a disorder and confusion, since without notice - our QA (not to receive automatic update) and the developers who have yet to receive the update - could not run our products.

    Only after some frantic research, the problem has been diagnosed and corrected by providing all non-developers the new package of redistribution that contains the new revisions by the runtime assemblies.

    Now, putting aside frustration, I would really like to know what is the "Microsoft suggested way" to provide information on these cases. As most of our developers receive automatic updates 'silent', there was absolutely no way to guess what was about to happen. Even our engineer of deployment has not received the redistributable InstallShield appropriate.

     
    Please advise!
     
    Thank you
    Gil Moses
    Waves Audio Ltd.

    It is recommended that all customers get updated to the latest version and there are several tools such as WSUS and System Center Configuration Manager that helps you manage the updates. It is also recommended in some cases you are running the update in the test environment and so that caused no problem then distribute and you could either block or allow the update using these software.

    Updates are being tested before release to ensure that they work properly, but it is not possible to test all because you're a developer, you know. And when such cases happened you can contact Microsoft Support and open a support case to help solve this problem as soon as possible.

  • I update my windows 7 sp1 and etc., now boots very slow, also other application works too slow.sholud I unintall all updates?

    I update my windows 7 sp1 and etc., now boots very slow, also other application works too slow.sholud I unintall all updates?

    Hello

    1 are. what other applications you referring?

    I recommend you to uninstall Service Pack 1

    I suggest that you follow the steps mentioned below to refine the question causing third-party software (as applicable).

    Step 1:

    Test the issue in safe mode and check if the problem persists.

    Step 2:

    If your computer very well in safe mode functions, I would pt you your machine ├a State clean startup in order to eliminate conflicts of third party software.

    Note: Follow step 7 to restart your computer in normal mode

    See also: slow PC? Optimize your computer for maximum performance

  • Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied.

    Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?

    Hello

    You are unable to download the updates?

    Try the following steps to resolve the problem:

    Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.

    Check out these links:
    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.

    Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
    your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
    connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:
    See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.

    You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
    http://support.Microsoft.com/kb/958052


    Kind regards
    Afzal Taher-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Cannot install 2 important updates - unknown error: Code 80070026 and Code 26

    For months now, I have tried to run updates for Vista Windows, but I get these two error codes. I thought I might have a virus that my antivirus regularly had not taken, I went to http://onecare.live.com/site/en-us/center/whatsnew.htm and performed a full scan. There are several issues, but they have been resolved. However, I can not always install updates and I get the same error codes. Any help?

    Hi Sylvirblu,

    Thank you for visiting Windows Vista Microsoft answers forum.

    Please let us know about the updates are available for download and the failure with the error code 80070026.

    I will suggest that you turn off the Antivirus software that is running on the computer and put the computer in a clean boot environment and then try to run the Windows updates, as in this case seems to be a conflict of third party software.

    To perform a clean boot on a computer that is running Windows Vista, follow these steps:

    1. click on start, type msconfig in the search box and press ENTER.

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    If your problem is resolved, follow the procedure to determine what is causing the problem section in KB article to narrow down the exact source: http://support.microsoft.com/kb/331796
    In addition, refer to the section on how to restore your computer to a Normal startup mode

    Please let us know if it helps.

    Thank you and best regards,
    David

  • Update asking me to install an update of May 9, 2009 - and have any questions on this

    Hello!

    I have windows vista 32-bit sp1.  I do not have automatic updates on and install when see new updates. (and usually do)

    I'm writing a summary of results case has nothing to do with my question which is at the end of the present.

    Since may or June, there are updates, showing as important, but I thought that I didn't even have the software for them and supposed Microsoft just erred by offering me some updates, so I do not installed about 6 of them.

    I've been looking at cela yesterday and found on the update screen I can do a click right of each update for more details and found that these updates are necessary.

    So, I realized that these are valid and that it must be installed.

    There were about six or seven dates in may, June etc. and I just did the in date order, rather than all of them at once, to be sure.

    Once finished, noticed was another 11 or so updates for windows vista yesterday and I installed all the people.

    Everything was installed and made, and no further updates showing.

    I explain everything earlier in the case has something to do with the following:

    Today I come online and updates windows says I have an update to do.

    It is said: for kb955430 Vista update, said important and the date is 19/05/2009

    Do I need to install this?  Or it is necessary before moving to vista sp2? (I don't know when will go to sp2.)

    I am concerned about the date and also while not knowing if I should install.  I can't understand why a significant update is being invited to accept today may 2009.

    That's why I wrote all the foregoing in case he has something to do with this update list available today.

    Thanks for your help!

    Hi Michelle562,

    This update improves reliability when you install or remove Windows Vista Service Packs.
    I suggest that you install was updated for KB955430.

    Every time that you run Windows Update, it synchronizes with the server for updates and check the necessary updates that must be installed on your computer. If you decide not to install some updates, they will appear later.

    You get the updates of May-June, now is because you held some updates of the previous months and, therefore, updates that needed to be installed after these updates now appear in Windows Update.

    Thank you and best regards,
    Abdelouahab Microsoft responds to the technical support engineer

  • Do not install Windows Update KB968930 PowerShell 2.0 and WinRM 2.0. Error 0x8007F070

    XP SP3... Do not install Windows Update KB968930 PowerShell 2.0 and WinRM 2.0. Error 0x8007F070

    I uninstalled the .net framework and reinstalled from the beginning. Still not get it to take, any help would be appreciated.

    Thank you

    Try ' Haralambos Mavromatidis solution suggested this feedback connect.microsoft.com poster:

    Problem was resolved by resetting the security - choose your own switches or use the following for a newspaper at the root of C: file by typing the following in a command prompt:

    %windir%\system32\secedit.exe / configure %windir%\repair\secsetup.inf /db secsetup.sdb/log C:\secedit.log /verbos /cfg

  • When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

    When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

    I'm not that computer literate and do not understand what needs to be fixed.

    This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

    I use ESET Antivirus Node32 software.

    Hello

    1. What is the error message or an exact error code?

    2 have you made changes on the computer before this problem?

    3. you try to check the updates?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Reset Windows Update components and then try to download the updates.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

     

    Method 2:

    File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

    http://support.Microsoft.com/kb/310747

    Please respond with more information so that we could help you more.

  • Windows Update has encountered an error and cannot display the requested...

    I tried Windows Update and got the answer "Windows Update has encountered an error and cannot display the request... »

    Hello

    (1) what is the description which are impossible to install updates?

    I suggest to follow the steps provided and check if it helps.

    You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update: http://support.microsoft.com/kb/883614

    Hope this information is useful.

  • KB2572073 security update is to repeatedly download and installation

    Hello
    KB2572073 security update is to repeatedly download and installation. When I check on Windows Update reports installed successfully. How can I fix it?

    Hello
    Thanks a lot for your answer. I followed the actions in the link provided, but the problem persisted. To fix it I had to remove the .NET Framework and then reinstall it by using the following procedure. That solved my problem.

    Thank you very much for your help.

    Step 1: Remove the .NET Framework using the removal tool

    ================================

    1. download the tool from the following link:

    http://CID-27e6a35d1a492af7.SkyDrive.live.com/self.aspx/Blog_Tools/dotnetfx_cleanup_tool.zip

    2. save the zip (dotnetfx_cleanup_tool.zip) file from the link above on the local desktop and extract it.

    3. double-click on cleanup_tool.exe to run the tool.

    4. follow the instructions given.

    In the "cleaning product:", please select ".NET Framework - all versions.

    5. click on 'clearing '.

    6. restart the computer.

    Note: Once we have removed the .NET Framework, some applications that have need of .NET Framework runtime database could lose their functions. It's just a temporary problem. The function will return to normal after the reinstallation of .NET Framework.

    After completing these steps, please go to the following suggestions to reinstall .NET Framework 1.1 and its updates.

    Step 2: Install the .NET Framework 1.1 and its updates

    ============================================

    Please download and install the following updates in the order.

    Microsoft .NET Framework Version 1.1 redistributable package

    http://download.Microsoft.com/download/a/a/c/aac39226-8825-44Ce-90E3-bf8203e74006/Dotnetfx.exe

    Microsoft .NET Framework 1.1 Service Pack 1

    http://download.Microsoft.com/download/8/b/4/8b4addd8-E957-4dea-BDB8-c4e00af5b94b/NDP1.1sp1-KB867460-x86.exe

    Security Update for Microsoft .NET Framework Service Pack 1 (KB2416447)

    http://download.Microsoft.com/download/6/D/C/6DC6FFA8-4585-4192-A366-85712491322D/NDP1.1sp1-KB2416447-x86.exe

    «Note: when the window "file download" appears, please click 'Save' and follow the directions to save the file to the desktop.» After downloading all the installation files, please double-click on each to install.

  • Failure of the update of the virus definitions and spyware

    My machine will not update the definitions of viruses and spyware. It maintains error 0 x 80070424 report.

    I get this error reported:

    Failure of the update of the virus definitions and spyware

    Security Essentials might not check for viruses and software spies definition updates following a network connectivity problem or the internet.

    Security Essentials could not install the definition due to updates

    Hi GlennRogers,
     
    Here are a few articles related to this topic. Try the suggestion given in the statutes for this problem:
     
     
     
    Here's a direct link to troubleshooting automated for this question:
  • Update 80070103 is a failure, and I get message that firefox is crashed!

    Update 80070103 is a failure, and I get message that firefox is crashed, how to install this update?

    Hello

    1 did you changes to the computer before the show?

    2. who is the antivirus installed on the computer program?

    3. the updates you are trying to install?

    4. that you get an error message when you work with Firefox?

    5. are you able to work with Internet Explorer?

    I suggest you to provide information about the update has failed.

    See the updates of Windows Installer
    http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

    I suggest to refer to the article and complete the steps described in the article:

    Windows Update error 80070103
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

    See also:


    The problems with the installation of update
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    I suggest you to contact the support of Firefox about firefox:

    http://support.Mozilla.org/en-us/home

    I hope this helps.

Maybe you are looking for

  • How to rebuild the Windows 7 start menu?

    Having had a virus and deleted successfully, I find myself with a strange problem. The virus, among other things, seems to have changed the menu start removing the 'pinned' programs is not a problem, but also remove the contents of the folders in "al

  • L300-147 DVD/CD drive not working - can't read DVD or CD, or CD ROM?

    I can open and insert a DVD/CD/CD Rom very well, and the light returns when it is inserted. some noises - but then nothing happens. laptop is brand new. what I have to install something to make the reader work? or am I missing something? Thanks for t

  • Too much to handle-Help!

    I have a desktop imac with the following specifications: OSX ver 10.9.5 Intel Core i7 3.4HHz Memory: 8 GB at 1333 MHz DDR3 My problems are: 1. Microsoft PowerPoint, Word, Excel take a long time to get on my screen. 2. I also get the message that I ra

  • Pavilion g6 - Recovery Kit

    I had problems with my laptop, so I decided to restore it to factory settings. My laptop isn't a recovery partition or service such as HP Recovery Manager HP programs. So, I decided to order a Kit recovery for my laptop. I wonder what it comes with?

  • Error java.lang.IllegalStateException blackBerry Smartphones

    Hi, I got an error on my phone uncaught.exception.java.lang.illegalstateException error when I reset my phone by removing the battery.  Please notify.