Update does not update. Get annoyed.
A week ago I noticed this update was not installed successfully at least a year. I got an error 80070490.
I tried to rename a folder as shown here, it was supposed to be supposed to help? There can be no. (The page that suggested: http://social.technet.microsoft.com/Forums/en-US/itprovistasetup/thread/b9b12f20-9cdb-438a-9215-ab566dcf2460?prof=required) The only thing he did was erase my update history.
I tried to update manually. (.NET framework 3.5, SP1, SP2, ect.)
I tried to run the system scan tool, as far as I know he did nothing. Not always the same error. Still annoyed.
This person had a similar question and Mouneshwar R had a good answer that seamed useful, but was a little confussing. (Link: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/e1afe5e3-571b-47c5-abbc-e8896857a44d/#193e40d1-903f-4503-8dcf-1327a4b2f6fb) If someone could explain step 4 on rename files I might try this. Meaning, I could not find a way to PM him I couldn't ask him directly.
Any help would be greatly appreciated.
Thanks in advance,
zetacon2111
Back up all of your belongings, make sure you have media of resettlement for programs that don't come with the computer etc and contact HP on how to use the recovery partition, if it still exists on the 2nd hand computer, or alternatively, you have the recovery disks?
TaurArian [MVP] 2005-2010 - Update Services
Tags: Windows
Similar Questions
-
Windows Update does not work, get error 641, 80070641 and 8004FF01 on Vista Home Premium
Windows Update does not work, get error 641, 80070641 and 8004FF01 on Vista Home Premium
Hello!
the mechanic system?It's what has helped us toOpen Notepad.
Copy the following into Notepad and save it as fixme.reg
push all the files and then save it to your desktop.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\msiserver]
'DisplayName"="@%SystemRoot%\\system32\\msimsg.dll,-27 '.
"ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.
74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 6 D,------.
00,73,00,69,00,65,00,78,00,65,00,63,00,20,00, 2f, 56, 00, 00, 00, 00
'Description"="@%SystemRoot%\\system32\\msimsg.dll,-32 '.
"LocalSystem ObjectName"=""
"ErrorControl" = DWORD: 00000001
"Start" = dword:00000003
'Type' = dword:00000010
"DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00
"ServiceSidType" = DWORD: 00000001
"RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.
00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00, 61, 00,------.
74,00,65,00,50,00,61,00,67,00,65,00,66,00,69,00, 6 C, 00, 65, 00, 50, 00, 72, 00, 69,--------.
00,76,00,69,00 6 c 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 c, 00, 6f 00, 63, 00,------.
6B, 00, 4 d, 00, 65, 00, 6 d, 00, 6f, 00, 72, 00, 79, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,
00,65,00,67,00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00,------.
73,00,65,00,42,00,61,00,73,00,65,00,50,00,72,00,69,00, 6f, 00, 72, 00, 69, 00, 74,------.
00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00,------.
65,00,43,00,72,00,65,00,61,00,74,00,65,00,50,00,65,00,72,00, 6 d, 00, 61, 00, 6e,------.
00,65,00, 6F, 00, 74, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 C, 00, 65, 00, 67, 00, 65, 00,------.
00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,72,00,69,00,76,00,69,------.
00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 53, 00, 65, 00, 63, 00, 75, 00, 72, 00,------.
69,00,74,00,79,00,50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00,------.
00,53,00,65,00,43,00,68,00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 00, 69, 74, 00,------.
66,00,79,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53,------.
00,65,00,50,00,72,00, 6f, 66, 00, 00, 69, 00, 6 c, 00, 65, 00, 53, 69, 00, 00, 6F, 00, 67, 00,------.
6 c, 00, 65, 00, 50, 00, 72, 00, 6f, 00, 63, 00, 65, 00, 73, 00, 73, 00, 50, 00, 72, 00, 69, 00, 76,------.
00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.
72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,
00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,00,61,00,74,00,65,00,------.
47.00, 6 c, 00, 6f, 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.
00,67,00,65,00,00,00,53,00,65,00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00,------.
72,00,69,00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 00, 50, 72,------.
00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 52, 00, 65, 00,------.
73,00,74,00, 6f, 00, 72, 00, 65, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.
00,65,00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 65, 00,------.
51,00,75,00, 6f, 00, 74, 00, 61, 50, 00, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00 65 00, 67,.
00,65,00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00,------.
50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54,------.
00,61,00, 6B, 00, 65, 00, 4f, 77, 00, 00, 6F, 00, 65, 72, 00, 00, 73, 00, 68, 00, 00, 69, 70, 00,------.
50,00,72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 4 C,
00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00, 50, 00, 72, 00, 69, 00,------.
76,00,69,00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 42, 00, 61, 00, 63, 00, 6 b------.
00,75,00,70,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00,------.
00.00
"FailureActions" = hex: 84, 03, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.
00,01,00,00,00, c0, d4, 01, 00, 01, 00, 00, 00, e0, 93, 04, 00, 00, 00, 00, 00, 00, 00, 00, 00
Go to your desktop and double-click the file name fixme.reg
Restart the PC and try to install the updates again
or
Click Start.
Type regedit in the search field and press to enter.
On the registry change windows click on file and select import.
Navigate to the location where the fixme.reg file and select the file.
Click ok on the windows screen once the registry is merged successfully.
Restart computer and check if updates installs.
* We had system mechanic and I uninstalled it since I discovered that it corrupted my windows installer.
Hope this helps
Microsoft KB article
http://support.Microsoft.com/kb/2642495
Thank you!
Makoi
-
Block pop up does not work, get a casino site popping up
Block pop up does not work, get a casino site popping up
Hello maresthomas, this looks like a problem maybe caused by adware/malware on your pc. Please go to firefox > addons > extensions and remove any suspicious entries (toolbars, the things that you have not installed intentionally, I don't know what purpose they serve, etc.). also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software you have in place and various other tools such as the free version of malwarebytes & adwcleaner.
Remove a toolbar that has supported your Firefox or the homepage search
Fix Firefox problems caused by malicious software -
System does not boot, get the white screen after preparation for auto repair
Hello
I have a Toshiba Satellite with Windows 8 and yesterday there were some ongoing update and must restart. When the computer reboots, it took some time and then I got a blue screen (very quickly) who said something as she encountered a problem and needs to fix (it is really fast and I can't see the whole text). Then goes and comes back as it is booting (with the toshiba logo) and he says prepare auto repair. Then it goes to a white screen. I tried to get into the HARD drive recovery (power with F12) and when I select HDD Recovery and confirm Yes, it just goes to a blank screen. I went into the Setup utility (powering now F2 while) and has chosen default install and who does not either (although it has fixed the problem with my keyboard backlight does not). Support of Toshiba said that it is the operating system, not the hard drive. But I need a drive recovery media that will scan all. Anyone know other options? I have a disc of recovery of a Microsoft coming 8 Pro (dell). Would it be an option, to use it (I got it on a flash drive) and start-up of that? Thanks for the help.
Hi John,.
Thank you for the update.
Given that you want to use the Windows 8.1 recovery disk, you won't perhaps able to start Windows 8 using Windows 8.1 because the computer may not be able to find the files of Windows 8 start to recover.
Yes, you pouvez install 8.1 Windows using the recovery disk. However, you may not be able to perform the upgrade option when installing Windows 8.1. When you click install now and follow the instructions, you must choose the Custom Advanced option to continue installation. Choose Advanced custom options will create a folder in the C: drive (or any other partition when you do not want to install) named the Windows.old folder which expected to have all of your files and documents of previous installation and are accessible.
Make sure you have the drivers available for the devices installed on the computer as network card, drivers etc. of video card you install Windows 8.1.
Hope the information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.
Thank you.
-
My HP6500 wireless printer was working well until 2 days ago. Now, I get a message that my network does not recognize my printer. I also have a message that says I need to run OneNote before it will work. any suggestions on where to start
Hello
1 have had any changes made on the computer before the show?
2. What is the full and exact error message?
Method 1:
I suggest review the links and try to run the troubleshooter and check if it helps.
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Method 2:
Check out the links and check if that helps:
Network and wireless printing problems
Solve a problem
Let us know if it helps.
-
XPS 9000 froze and restart does not start - get the cursor flashing, top left of the screen
System was working normally and after some time froze - no mouse movement, clock does not move, etc.
Did a stop down with the power button (hold down 10 sec +) to stop.
On switching on, does not pass through the boot sequence. F2 does nothing and the only sigh of 'life' is a blinking cursor, upper left corner of the screen. Tried to close - turn several times with the same result.
I suspect a motherboard problem because there is no start. Don't know any other tricks to try to resuscitate the box.
Does anyone have experience/solution for this type of problem?
WGR,
As there is no "beeps", I guess as a failed motherboard.
Try the following, if you are comfortable working around computers:
Note: The only 100% POWER supply test method, is to install a known working power.
Unplug the power cord, hold the power button in for about 15-20 seconds, open the case, disconnect the power connector 24-pin motherboard and jumping the Green wire to one of the black wires, plug in the power cord and the power of the system, if food and case fans and disk hard drive performance then the power supply should be good.Note: Do not remove the wires from the plug, use a small piece of wire or a paper clip as a rider.
Excerpt from power supply, again, unplug the power cord, hold the power button again for 15/20 seconds to discharge residual power, reconnect the connector 24 pin to the motherboard.
Remove all the computer PCI cards, remove the video card [as appropriate], disconnect all devices, except the monitor, mouse and keyboard and unplug cable power & data of all readers.
Reconnect the power cord and power the system on, see if you get something different from the LED on the power button, or any 'beeps '.No difference, remove the system memory and try again.
Still shows no signs of life while looking at a motherboard replacement & maybe a processor.
Note: The good news is, processors lack rarely, being the only method I know to check a processor, install a compatible work PC, or use a known job processing.
Unfortunately the Dell OEM XPS 9000 renovated/new motherboards are not cheap.
Bev. -
Windows Update does not work, Get 0x8024400A error message.
Hello everyone, update Windows displays the error message. Will not work. New installation of Windows XP Pro 32-bit. Get the 0x8024400A error message. Follow-up guests for Microsft fix it fix it but requires SP3? Cannot load it down. Also tried installing BITS, but failed. Any suggestions? Yet once it is a new installation of XP Pro. Thank you and Bravo.
Original title: Windows Update woes
-
Downloaded new updates, IE8 does not. keep get IE cannot display the webpage
then I removed IE8 now running 7, deleted all the updates on 14/10/09 and 15/10/09. still of the same problem with IE7.
Unexplained computer behavior may be caused by deceptive software
http://support.Microsoft.com/kb/827315Microsoft PCSafety provides users at home (only) with free assistance to treat infections by malicious software such as viruses, adware and spyware (including unwanted software).
https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1Verification / help with Hijackware
http://aumha.NET/viewtopic.php?f=30&t=4075
http://MVPs.org/winhelp2002/unwanted.htm
http://inetexplorer.MVPs.org/data/prevention.htm
http://inetexplorer.MVPs.org/tshoot.html
http://www.MVPs.org/sramesh2k/Malware_Defence.htm
http://www.elephantboycomputers.com/page2.html#Removing_Malware* Chances are you will need to seek the assistance of experts in http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.php, http://aumha.net/viewforum.php?f=30 , or other appropriate as well.* *.
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft
-
Breathe the application does not: I get no reminder
Hello everyone,
I don't know if this is normal or not, but I get no notification of the app to breathe. I put it to "Every 3 hours" so it must warn me to breathe every 3 hours, but I get nothing.
Does anyone have a suggestion?
Hello fredericfrommartigny,
After reviewing your post, it looks like you have the settings in the app shows and you don't receive reminders on the Apple Watch.
There are a few things we can do to try to recover these reminders.First of all, if you do not disturb, which prevents notifications.
Notifications on your Apple Watch - Apple SupportSecond, we can try disconnecting and rematching the Apple Watch to the iPhone.
Before erasing content and settings on your Apple Watch, your iPhone will create a new backup of your Apple Watch. You can use the backup to restore a new Apple Watch. After that your Apple Watch unpairs, you will see the message start pairing.
Cancel the twinning of your iPhone - Apple and Apple Watch Support
Set up your Apple Watch - Apple SupportThank you for using communities of Apple Support. Good day.
-
"game play cd, dvd does not play, get a" have no authorization error. »
for some unknown reason, my discs do not play my dvd. an error message indicates that I have perhaps not permissions... all readers worked, (2 drives), they recognize the cd but not dvd's... help!
Hello
1. What is the exact error message that you receive?
2. what type of files does DVD contains?
3. do you try to play the same DVD on another computer and check what is happening out there?
4. What is the operating system installed on your computer?
Method 1:
I suggest to run the fix tool from the link provided below and check if it works:
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems
Method 2: Download and install the latest codec on your computer.
To do this, please see the link below: http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=06fcaab7-dcc9-466b-b0c4-04db144bb601
Reference: The problems with DVDs and movies in Windows Media Center
Thank you.
-
DirectSound does not-how get direct driver sound >
My sound mysteriously stop working.
Learned that a third download may have caused a driver problem.
Not a techie serious, I don't mess with things to register w/o qualified advice / direction.
How can I get the driver and make it work?Yes, go ahead and uninstall. Reboot and it must be reinstalled automatically. Then, check the Device Manager.
-
I get a blue screen during boot and my windows XP SP2 based computer will not start. Additional information on the screen is
STOP: 0X000000D1 (0X3D10047F, 0X00000002, 0X00000000, 0X85B7A10F)
No idea what this could be. Help would be appreciated.
You have installed any new software driver or hardware recently? You should try to repair the installation:
How to perform a repair of Windows XP installation releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
Just got a LifeCam Cinema.
Installed the drivers-software, plugged the cam, noticed drivers installed.
Tested by opening the installed LifeCam software. Describes the options to take photo, audio or video. "Or the other option does appear immediately the error" LifeCam could not save your, photo, audio clip or video clip.Shows Device Manager is installed correctly.
Swapping the same USB ports it shows in the software, no device detected, a driver is re-installed during the exchange of the ports, it comes up with the 3 options mentioned before and again the same error message.Have also tried Google chat and shows no video, but gives the possibility to do video chats.
System: Windows 7 64-bit.
I have full admin rights on the system...Christophe ideas?
Hello Striff,
If the camera is not detected, it seems to me that the drivers are not installed for the device works, I suggest you reinstall the Lifecam drivers and check if you have the same problem.
I suggest that you try different methods listed in the following article to resolve this problem:
Troubleshoot failures to find the new LifeCam hardware:
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think. -
sfc/scannow does not box gets up and starts to run
I want to run a scan had sfc/scannow, all put in place with private admin and press on enter it gets first line up and then stops and says can not run this analysis
Thank you everyone but I didn't like some of the answers said question and ran the SFC /scanow in safe mode and it works now
-
74147N does not only get no change in display
Hello
I built a simple circuit. I can't make it work. I tested each section of the scheme and they operate except once the 74147 is connected.
It seems as if the 74147 is not powered. Can someone explain or help me make it work?
Thank you.
Ray
Hi Ray,
I had a glance on your circuit and I think you should add some pull ups at the entrance of the 74147. While it is probably not necessary in an environment calm in real life, it is convenient to good design to do and to avoid EMI problems down the road.
Attached, is that your circuit modified with 9 pull up of resistance.
Hope that helps.
-
Acrobat Connect Pro does not. Get white screen of death.
When I log in, I get a blank screen of white (below). It started yesterday. Never had a problem before. Past on all browsers on multiple computers. Any ideas?
Reach out using Adobe and see if there is something to do. Acrobat Connect Pro Support
Are you redirected after you connect?
Maybe you are looking for
-
Recently, the keyboard no longer, no usb, in the BIOS menu bottled in the menu where you choose the Safe Mode boot. It's when you start the laptop, I press F10, it works in the BIOS, and is not a button doesn't work, the time comes, while the BIOS do
-
I have XP home and Outlook outgoing mail keeps getting hung up and are not sent due to error ThorConnWndClass. Help? I hate this and am about to go to an Apple. Thank you.
-
80244019 MS VISTA UPDATE FAILURE?
MS Vista UPDATES failed, for the past few weeks, when I check (automatic updates turned off). Same error code 80244019 shows. The clues, please?
-
When I try to add a VPN connection, I get an error that the wizard is unable to connect. I am running VISTA. I want to simply add a VPN and be able to connect to a non-profit organization where I volunteer. My VPN working two weeks ago. Then my sh
-
Adding another script worm IPCC Enterprise 4.6
I broke the script live today so I ask before I try again. I have a script called CC_Main_V5. When I use Explorer to scripts, I can see the different versions of the script and say which one is the active version. I want to make a copy of the current