Update drivers for Equium A60-191

Hello

I want to update my drivers - especially my display driver I often get an error message saying that my "ati2dvag display driver has stopped working properly", leaving me with a low display resolution. I reboot and I told me that Windows has recovered from a serious error.

I just be a part of this site was updated drivers, but my model is not listed.

Can anyone help?

Thank you.

Hello!

Have you looked in the Archives?
There, I created all the drivers:

http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
* Archive *-online satellite-online satellite A-online Equium A60

Good bye

Tags: Toshiba

Similar Questions

  • Updating BIOS for Equium A60-181

    Hi, according to the toshiba site there is a new update of the BIOS for my laptop.
    I was wondering is it worth the update, unfortunately, there is no information
    provided regarding the bugfixes or improvements? Also can I use the
    Windows update tool or use the bootable CD, it's just I'm not sure
    flashing Windows XP, except if it is a procedure without normal fault?

    see you soon,

    Richard S.

    Hi Richard

    Richard you have some problems with this device? If everything works properly I don't see a reason any BIOS update.

    If you think that the update of the BIOS is necessary, you can try Windows based Bios update but please check the first Description of the Toshiba BIOS update before you continue.

  • The motherboard Equium A60 - 191 necessary UK provider

    About 8 months ago, I bought this toshiba Equium A60-191. I need another motherboard for it, everyone would be able to help because I can't seem to find suppliers for this. Cheers mark.

    Hello

    I think you should contact a Toshiba authorized service partner. They should be able to give you all the parts. You can find one here:
    https://EU.computers.Toshiba-Europe.com
    -Support & downloads - find an authorized service

    Good bye

  • Equium A60-191: upgrade graphic integrated processor

    Hi, new,

    I was wondering if I could spend my processor integrated switch to something better (anything!) I have a TOSHIBA Equium A60-191 with an ATI Mobility Radeon 7000 IGP.

    Thanks (please answer)
    Thanks again!
    Oh and thanks again!
    Suddste000

    Hello

    as far as I know, it is not possible to update the graphics card in a laptop.

    Good bye

  • Equium A60 - 191 wireless lan mini pci

    Hello
    I have a Toshiba laptop Equium A60-191.
    I wanted to know if I can install a wireless LAN card mini pci on this model. Does anyone know the procedure.

    Thank you
    Vikram

    Hello Vikram

    I found the information that your device is not ready WLAN. This means that your device has no antenna WLAN. If you want to use the WLAN you must buy card PCMCIA WLAN or WLAN USB stick.

    Good bye

  • Equium A60-191 - need a new recovery disk

    Hello. Anyone know where I can get a cd recovery Toshiba Equium A60-191-the one I was badly scratched and I need a new - can I download one on line?

    Any help would be greatly appreciated. Thank you
    Dee :-)

    The recovery disc can t be downloaded.

    If you need a new recovery disk, you need to ask your local ASP. They can order.
    On the Toshiba site, you can search an ASP:
    http://EU.computers.Toshiba-Europe.com/ > support & downloads > find an authorized service provider

  • Equium A60-191 - blue screen at startup

    Hello

    I have a laptop Equium A60-191. When I start it, I get a blue screen and it tries to re start it again. I started from my Windows CD and used the recovery console to fix the problem. He now works ok. However, the same thing that happened there are only 9 months.

    Has anyone seen this problem before?

    Thank you

    In my opinion, this kind of problem has thousands of PC users with all kinds of laptops and desktop PCs. really nothing exceptional and there is no reason that a why this happens.

    If now everything is Ok I see no reason to talk about this. Once again, if the same thing happen please report only and maybe we can discuss your problem.

    Bye and happy new year!

  • Equium A60-191: 'request could not be performed because of an i/o device error. "

    I have an Equium A60-191 my dvd drive has stopped working, the led on this subject is on all the time like his who seek constantly.
    It does not read the CD or dvd and gives an error "REQUEST COULD NOT BE PERFORMED DUE TO A DEVICE IO ERROR.

    I tried to remove and reinstall the drive from the Device Manager, it doesn't help. I also tried to boot from the drive computer, but does not start, so I think that the drive does not work.

    I also noticed that the motor does not work in the reader, because that drives don't spin. Device Manager indicates that the drive works properly. Anyone know what is this error?

    1. click on start
    2. right click on my computer
    3. Select manage from the menu that appears
    4. in the computer management window, select Device Manager
    5. in the right pane, click to expand IDE ATA/ATAPI controllers
    6 identify your CD/DVD drive in the menu expanded and right click on the appropriate drive
    7. Select Properties
    8. in the Properties window, click the Advanced Settings tab
    9. in the Transfer Mode box that represents your CD/DVD drive (typically device 1), open the menu drop down and select PIO only
    10. click OK and exit all windows.

    If this does not solve your problem, then you need to go back using the procedure above and change device 1 to #9 step will support to 'DMA if available '. Then, change the device 0 to "PIO" only in the Transfer Mode box.

    Device 0: Primary IDE Channel
    Unit 1: Secondary IDE Channel

    Of course, he could also be dead DVD player. In this case, a new drive should solve the problem.

  • Question about updating drivers for Tecra A9

    Hello

    I noticed that support Toshiba updates drivers for Tecra A9 very slowly even if they introduce important features. For example, the display driver for 965 graphics worm 15 is much better than 14 worm distributed by Toshiba. I know that pilots are tuned and Toshiba has many models to take care, but several months of waiting seems to be too long. I do not expect that all minor versions are updated, but the most important should be!

    Kind regards
    Marek

    Having the latest drivers would be nice, but its different for laptops. Motorists need to be customized for the features of the laptop, and they probably need to go through quality control, testing too although I guess.

    However there may be a solution, you can try to install the drivers later on newer models such as the Tecra A10 and M10 :)

  • Need a new mothherboard for Equium A60

    I tried suggestion given in the forum but I am always sick, I think I need a new mothherboard for Equium A60, I searched on the Toshiba site but tere does'nt seem to be links or place where it is said you can buy a home, HELP!

    As much as I know, that you cannot order parts for laptop direct from Toshiba.

    You can do this in some independent electronic store, perhaps by approved maintainer Toshiba or on eBay. I recommend you check out eBay. Here you can find many hardware components for various Toshiba laptops.
    With a little luck you can find mainboard for your model of laptop also.

    Check it out.

  • Updating drivers for CD & DVD corupts

    After today's windows XP update of my CD - RW and DVD disappeared from the 'My Computer' list.  When I go into the device manager that I have failed to load the corrupted or missing device drivers.  I get an error code 39?  Looking for a resolution, thanks JB

    Hello

    Code 39 means that the driver is corrupted or missing.

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    --------------------------------------------------------------

    Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
    are you can reinstall the 'old'. Many use Windows default drivers however some special aura
    ones. Also check the website of the manufacturer of the car.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

  • can't find updated drivers for a Husqvarna Viking D-card reader

    I can't find the updated drivers for a Husqvarna Viking D-card reader-recorder that works on Windows 7 Home.  Help please.

    I can't find the updated drivers for a Husqvarna Viking D-card reader-recorder that works on Windows 7 Home.  Help please.

    Hardware support - including software and drivers that allow any operating system to communicate properly with him - is the manufacturer of the equipment.

    In other words, what Husqvarna told you when to contact you?

  • Could not find the update of BIOS for Equium A60-157

    Hi, I hope someone here can help me, I'm looking for the update of the BIOS for an EQuium A60-157, can't find it on the page of the Toshiba BIOS update.

    Thanks in advance

    I ve checked the Toshiba support page under http://eu.computers.toshiba-europe.com and I found 1, 90-VICTORY update of the BIOS for your computer satellite phone.
    I don't know why you can't find but please, under product type choose ARCHIVE.
    You will find.

    Good bye

  • Graphic update for Equium A60

    Hi all!
    I'm new to this so you do not laugh too if my question is stupid! I have a laptop of equium A60-155 with graphic 64 MB built in, is it possible to upgrade to 128 MB or higher at all? I got different answers from different people so wanted to know once and for all, & that seems to be the place to do it. Thank you for your help in advance. Craig

    Hi Craig,.

    As you probably can see, your graphics card sharing his RAM with your CPU. This is controlled by a setting in your BIOS (titled "UMA" if I remember correctly).

    Go into the settings of the BIOS you look for this setting. If it is selectable (it is in my Phoenix BIOS on my A30), then you should see a pop window displaying a range of contexts usually 32 MB, 64Mb (default) and 128 MB.

    Obviously if you assign ity 128 MB, this will reduce the RAM remains available because it is shared.

    HTH

  • Drive recovery for Equium A60-157 PSA67E

    Has anyone got a copy of the disc recovery issued with an equium A60-157 PSA67E as I am trying to get this laptop for work and unable to get its hotkeys control and be able to work.

    I think I've worn out my wellcome with Equium forum and technical appeal but it's somewhere I myself lack of understanding on this subject.

    I loaded all recent downloads listed on their site, but always impossible to get these functions to work.

    So can you help me please...

    David

    Hello

    Why you n t install a new Windows OS on this laptop?
    Missing drivers can be downloaded from the page of European driver of Toshiba.
    All drivers are available!

    The recovery disc can be ordered for this model of laptop because it s too old.
    Clean install OS Win + drivers is therefore the only option

Maybe you are looking for

  • A lot of 'Other' data

    Hello! Recently I get messages saying that my storage is full. I ran a virus check and I had AdWare. I guess that's why. I removed it, however, I have still many 'Other' data being repries and I can't seem to understand what it is. It is possible, it

  • No noise and acoustics on Satellite A10-S177

    My laptop is a Satellite A10 - S177 XP, I happened to remove some programs from my laptop to create space, but it happened that he touched my audio and sound and currently they sound and audio bit in the control panel don't say no audio/sound driver.

  • Basic measures and the output impedance of the change with PXI-4461?

    Hello I am required to build an audio station with platform PXI OR test. It is my first experience with Renault. So I don't really know a lot... The PXI-4461 is a replacement of a former HP audio Analyzer. The measure is quite simple: 1 generate fixe

  • is - this (deleted) play or a fake?

    When searching online, I was somehow directed to this website, which seems to be made to look like part of windows, but may not be: (deleted) 06abQDU3QRXDV2aprXkz35OvKW4/ZiZrewsNcnCrUg9UNMAgTiOEftY70F8nis1ZH3g = I was told it was my computer and find

  • My 4300 Officejet prints very slowly.

    My officejet 4300 print s very slowly. It will be printed in the first half at normal speeds then slows down the way for the second half. I use Vista. I turned it off and unplugged the printer and the computer and waited for an hour. When I started,