Update error, windows 7 to windows 10

Similar Questions

• Impossible to update error Windows could not search for new updates code: 8024A 000

  Original title: Windows does not run updates, error 8024A 000

  When I try to launch updated, I get the error msg could not windows search updates 8024A 000?

  Hello

  Method 1:

  I suggest you to reset the Windows Update components manually by following the steps in the section Let me fixit myself .

  Warning: the section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry .

  Method 2: Analysis of SFC (System File Checker)

  SFC scan will find all missing or incorrect system files and repairs them.

  See the following site:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.microsoft.com/kb/929833.

   

• Vista update error window (8007001F & 80070570)

  I just used my drive of the windows operating system and my updates are not all installation error (8007001F & 80070570) someone can it tell me how to solve this problem, so I can install all my security updates?

  Hello

  Method 1:

  Perform the clean boot and then try to install the updates. Check out the link and follow the steps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once the diagnosis is made, follow step 7 of the article so that the computer can be configured to start in Normal startup

  Method 2:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
  Method 3:
  If the steps above don't help then I suggest you go through the steps mentioned in the link and check.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  I also suggest you to visit the manufacturer's Web site and install the latest drivers for the motherboard and check.

  Method 4:

  Check out the link and follow the steps.

  Problems with installing updates
   http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Windows Update, error: "Windows Modules Installer has stopped working and was closed".

  Whenever I run windows update, and try to install an update for Vista, I get the error message"

  "Windows Modules Installer has stopped working and was closed"

  . This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.

  Thank you

  Luke

  Hi guys

  I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.

  Thank you

  Luke

• Windows update error: Windows cannot currently check the updates because the service is not running

  Original title: Windows Update No. Longer - Vista business functions

  Last month my Win Vista will not update, little matter how many times I try to do. I always get the error message "Windows cannot currently check for updates because the service is not running." You may have to restart your computer. "Control via msconfig reveals that he is ticked as"running ".

  I run Microsoft Fixit has several times. It is said he has "solved" the problem, but it did not work. Of course there is a corrupted somewhere file that needs to be replaced.

  Please don't say no "update for Win 7" or "Reinstall Windows" because it's not just going to happen.

  Thanks in advance,

  Hello

  1. you remember to make changes to the computer before this problem?

  2. what anti-virus software is installed on your computer?

  Follow these methods.

  Method 1: Anti-virus software may conflict with Windows Update.  You can temporary disable them and check the issue.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2: How to reset the Windows Update components?
   http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

  Method 3:  If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log

  c. delete the log file, and then restart the computer and check the issue.

  Well, it's going to be a long Chronicle, but in the end, the problem has been resolved. Please bear with me:

  Running the program MS Fixit in the past without success, I tried to run the update after you temporarily disable AVG, my program AV. no joy.

  I then ran CC Cleaner to get rid of some of 'dead weight '. I even used its registry cleaning option (which included saves).

  At that point, I did some 'household', & began to defragment my HD with Defraggler. But since it seems to take forever, I went to My Defrag, who finished the job much quicker.

  Although I tried to delete the edb.log file using method 3, I kept getting a message system which was unable to complete this action because the file has been opened in another program.  In the end, I was able to delete the file, but fact directly through Explorer. There also seems to be a sort of small file edb.log, indicating that it was a "recovered" version I deleted that one as well.

  At this point, I ran MS Fixit, who States that the Windows Update components needed to be fixed and proceeded to do so again. Because he had allegedly "fixed" my Updater in the past, I was not holding much hope that this time would be any different. So, after that what he has done, I was pleasantly surprised, I might actually start updating!

  However, the update message that a new version would be dl before I could go any further. So I did it.

  When the new version is started, it ran for about 10 minutes, coming with about 50 updates. According to flush out those who were of no use to me, finally I had dl and installed all relevant updates. And now, the update seems to work fine.

  Once again, my apologies for the long answer. But I wanted to tell the whole story, as I did not quite plan of RajithR.

  Thank you!

• Windows Update error "windows update location must be replaced with the default windows location."

  Original title: Failed to automatically / thru fixit updated windows installation (another) indicates both failed 1 of 5. It says windows update location must be replaced with the default windows location

  XP86 running. Recently had installed the additional memory. Microsoft Update icon never goes away - seems like if 1 of 5 updates usually install on a group. Keep trying to install updates (even those) again and again. Sometimes we will not install and then moved the next time, he's trying to install the same updates, another a group. Worked through say fixit and details window update location must be changed to windows default = - but did not say how.

   

  Hello

  Have you tried Microsoft Fix - it?

  See the following article:

   

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756/

   

  You cannot install some programs or updates

• Cannot install windows update, error: Windows Update cannot currently check the updates, because the service is not running

  Original title: Impossible to update Windows 7 on Netbook

  I have a Samsung Netbook running Windows 7, but can not run Windows Update

  Each ime that I try to run the update, I get the following message.

  Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.

  Hello

   
  Follow the steps from the links below and check if the problem persists.
   
  Method 1: Run the Troubleshooting Utility from the link below and check if it helps.
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates
   
  Method 2: Run the FIXIT in the below mentioned link and check if it helps.
  How to get the latest version of the Windows Update Agent to help manage updates on a computer?
  http://support.Microsoft.com/kb/949104
   
  Hope this information helps.

• Unable to do the Windows updates, error "Windows Update cannot currently check updates, because the service is not running.

  Only the news I get is an information box stating:

  "Windows Update cannot currently check updates, because the service is not running." You may have to restart your computer. »

  I checked that the service is running, and a process is running in the Task Manager.

  I have downloaded and run Microsoft Fix, it is said that it fixed the problem, but didn't.

  I cloned my old drive and installed my new drive in my laptop. It seems that there is no update history transferred when cloning, there is no history of updates now.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. The 'leftovers' Norton may be causing the problem. Roll up your sleeves & cross your fingers...

  [You can print these instructions for reference offline. If a step said to reboot, reboot! ]

  ACTIONS

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall Norton 360 and LiveUpdate and all Norton Add ons via Start | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online enable WF immediately after the reboot!

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. right click on the file that you saved in step #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: do NOT activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run (Norton) LiveUpdate until you get a prompt "no update more".

  8. click right on the following link & SAVE to download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  8B. do a right-click on the file downloaded in # 8 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop.

  8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 8 b above & double-click on the script (i.e., ie8 - rereg.cmd) to run the command, then restart again.

  9. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  10 a. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  10 b. do disappear/close the window pop up "Automated troubleshooting"! -then...

  c. 10, regardless of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [2]

  11 restart one last time & test by launching a manual check for updates.

  12. in response to this post with a status report - hopefully confirming that all six of the April 6 & March 2012 is installed correctly now.

  ===============================================================
  [1] trust Source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en [good for IE9, too!]

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• First update error Windows Home

  Our PC is stuck in a loop. He started the update to stop down as usual, then this message "update 3/3 0% do not turn off your computer"it stop and immediately began to restart. However, instead of starting up as normarl the message come again and it turn off started it to reboot. He did this for more than an hour. We have tried to start in safe mode, but it doesn't work anymore. How to stop and restart correctly?

  Debbiedennick,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  06/20 / 1102:25:07

• Windows update error 80072EFD

  Hello
  I have a laptop of old P750 for 2 months, after they need to do a restore to a disk upward, I now get the above error.
  I then decided to do a cover of toshiba with a clean install and still get the same result of windows update is not not able to connect to the server.

  I tried everything I can find this error, including the verification of the proxy settings for WU, reset the proxy via CMD prompt settings.

  I noticed something interesting while control validation using microsoft MGA diagnostic tool, where windows has been listed as a hat, but note some reports as:

  Validation code: 0
  LegitCheckControl: N/a, hr = 0 x 80070002
  signed: n/a, hr = 0 x 80070002

  My understanding is the way to 0 x 80070002 he couldn't connect identical to WU or that files are missing.

  I have rebuilt that recommended such c:\Windows\SoftwareDistribution records, turned off all firewall, removed antivirus / software malware but still no luck.

  It seems funny how the same thing happens even after a clean drive toshiba recovery.

  Any suggestions?
  BL262000

  Hello

  If you check Google and error code 80072EFD you will find many pages where you can find explanations why should be done about it.
  It's typical Microsoft problem and the solution must be sought by Microsoft.
  Have you checked
  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80072efd or http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/windows-update-error-80072efd/398546d2-6b6d-47a0-b075-82d815fa9a8f?

• Windows Update error code

  I have a new Toshiba laptop, running Windows 7 (Home Premium SP1 installed by the OEM). My internet connection works fine for all sites Web except it fails when I try Windows Update. Error message code is 8024402F. I already checked 'automatically detect DNS settings' I also tried disabling my firewall (McAfee) temporarily and tried without solution. I tried dozens of times in recent days.

  Any suggestions on how to fix this?

  Hello

  According to the Microsoft Knowledge Base, it has something to do with your Internet connection. Have you already checked the Microsoft Knowledge Base?

  Microsoft recommends disabling the security software (antivirus and firewall) and try the troubleshooting Windows Update tool as described here:
  [Code error Windows Update 80244016, 8024402f, or c80003fa | http://windows.microsoft.com/en-US/windows7/Windows-Update-error-80244016-8024402f-or-c80003fa]

• Windows 7 update error 66 has

  I tried several times to install an update from Windows 7, but it's still fails with an error 66A. Can anyone provide a solution?

  Hey,.

  You have already installed SP1 for Windows 7? Otherwise it and then test Windows update again.

  Otherwise, I used Google to find other interesting items and you should check this thread on the Microsoft page:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_update/Windows-7-error-code-66A-cant-install-KB2160841/11b6b2c5-E780-4343-9de5-ffa4619f45c4

  Check this box!

• Re: Satellite C850 - Windows Update error 800F081F

  3-4 months ago, I bought the laptop. Since I have it, it is completely impossible to get an update of windows. It is said that a new program must be installed before getting updates, but once the system tries to install it, it produces the error code 800F081F.

  Any idea what can be the problem? Windows is preloaded.

  > It is said that a new program must be installed before getting updates
  What new program?

• Error Code C800044E when the update of Windows Vista

  Please can someone help me with a problem I tried to download updates for windows.
  Whenever I'm looking for download the error code c800044e is displayed.

  I don't know much about laptops but can follow directions.
  I've been on microsofts website and fact as they advised IE SafeMode etc but nothing works.

  Please can someone help me... Ive had the phone for two years and I want to give my young children to use for school work etc but it keeps crashing.
  I did several scans for these two viruses & spyware etc but they come up clear.

  I hope someone can help me and talk me through how to fix this problem with steps clear lol...

  Thank you very much

  Hello

  I googled a bit more for this Microsoft error message and information refers to this MS knowledge base article:

  http://support.Microsoft.com/default.aspx/KB/971058

  Try the solution given by Microsoft, run the fix it Wizard

  Maybe it helps.

• HP OfficeJet Pro 8610: Windows Update error 80070490

  I received a Windows Update error 80070490 compared to the HP printer.  How to solve this?  What are the steps to take.

  Welcome to the HP Forums @ace8,

  I came across your post about Windows Update error "80070490" you received on your Windows Vista system and I wanted to respond to try to help.

  Here are two documents that I found on the Microsoft website on errors:

  1. Windows Update, error 0 x 80070490
  2. Windows Update error 80070490

  If there are problems with the printer features, let me know a description of the printer problems and I will do my best to help.

  Click the thumbs up below to say 'Thank you' & the "Accept as Solution" If the problem has been resolved it please and thank you!
  
  All the best,