update failed error 80070643 and Setup stops working failed failing msiexec.exe application module msi.dll

Similar Questions

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• USB mouse and keyboard stop working after I have install Windows Update KB2913431

  After installation automatic Windows Update KB2913431 (Win 7 Enterprise), the computer seems to work very well, but my mouse and keyboard stop working.  The option of automatic repair after that start with F8 does not work.  He said that the error is "unspecified".

  The fool is that it has created a constellation of intermittent problems when I try other options to get these devices to function after the update.  The questions I will of unpowered USB ports, grateful Windows and install the drivers for USB devices, but then do not recognize their (and are not), random BSOD, restore points invalid system, random boot failure, which causes discs to randomly stop working properly, closed randomly , à... I think you get the idea.

  I think it must be a driver problem.  I passed through the Device Manager and uninstall all hidden devices.  I have updated the drivers for everything that has an update available.  I tried to disable all, but Microsoft services at startup and in the list of "services".  I've always been unsuccessful; However, when I can get it to successfully restore to a point before the update (none of the automatic restore points work correctly) it seems ok.  It will sometimes seem to work after I applied the update, but then go haywire shortly after.  I am convinced that it is not a hardware problem, given that the prior update restores (when they actually cross without failure) work very well.

  I went through countless articles in the knowledge base and tried all the suggestions I've seen, other than registry cleaners because I had a bad experience with this earlier.  I tried so many things that I lost count and the memory of some of them.

  I reached point is never install the update (an option that I prefer not to use) or creating a clean Windows install on another drive (an option that I prefer not to use, but I'm a little more friendly to).  I already started to back up files to prepare a clean install, but I reach out one last time before I pull the trigger.

  Thanks in advance for your suggestions you have!

  Edit: I thought I could include other system information.

  Motherboard: Gigabyte P67A-UMD
  -Drivers for integrated components:
  Related articles - USB:
  -Renesas Electronics 3.0 USB root hub
  -Renesas Electronics USB Host controller 3.0
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1 26
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1C2D
  USB root hub-
  -Generic USB Hub
  -Network:
  -Realtek PCIe GBE Family Controller
  Graphics card: NVidia GeForce 460 GTX (driver c. 332.21)
  Sound: NVidia High Definition Audio 4 x, Realtek High Definiton Audio x 1
  There may be a conflict here: the address of the Realtek driver is 00000201, which is the same address as * a Nvidia drivers.* *.
  Mouse: Logitech (MX518) G3 mouse optical - wired
  Keyboard: Keyboard wired simple Generic USB Dell
  All other USB devices are currently disconnected

  Thanks, but I tried to fix myself on a personal level - my IT Department is not hot.

  In any case, the problem was resolved after much googling - I took possession and renamed a bunch usb*.sys file in the Windows\System32\drivers folder, uninstalled items usb from Device Manager and did a scan for the hardware changes.
  This solves the problem.

• Updated to 3.6. Extensions and themes stopped working. Updated to 6.0. Still does not work. Returned to 3.6. No dice. Renamed all the extension. Still does not work.

  automatically upgraded to Firefox 3.6. Extensions and themes stopped working. Updated to 6.0. Still does not work. Returned to 3.6.20. Still nothing. Renamed extension files still nothing. Help. everything worked great until the upgrade. Thems like Noia and Adblocker Plus still do not work.

  To help other users find solutions, please return to this Thread and log in to the forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• Error message 'Adobe Flash Player Update Service 11.6 r602 has stopped working & has been closed'

  Original title: Adobe flash player

  I get a message 'Adobe Flash Player Update Service 11.6 r602 has stopped working & has been closed'. How can I fix the update service so it will update?

  Hello

  This can help you:

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  See you soon.

• I got this error message "winrscmde has stopped working and was closed".

  ERROR WINRSCMDE

  I got this error message "winrscmde has stopped working and was closed".

  Program WINDOWS SECURITY ESSENTIALS download, which found the horse of TROJAN ALUERON in my system. Also, he explains that he keeps duplicating itself and the only way to get rid of it is to download WINDOWS DEFENDER on a CD/DVD or the key to a processor that has the same operating system as the infected CPU offline. I want to know if this Trojan horse attaches to the BIOS? Please tell me the other options...

  Thank you

  Bruce

  Hi Bruce,.
  Your computer is still infected by malicious software. Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide/
  It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Since the Adobe Acrobat update in may on my Samsung GalaxyTab S android version 5.0.2 calculations (add, subtract and multiply) stopped working with pdf forms.  Same shape works well on laptop.

  Since updating Adobe Acrobat app in may on my Samsung GalaxyTab S android version 5.0.2 calculations (add, subtract and multiply) stopped working with pdf forms.  Same shape works well on laptop. Form calculations are still working fine on the laptop using the same forms.  Also worked fine on Samsung Tablet before can update the app.

  Hi herb,

  The calculations do not work as they use Javascript to perform the operation and version 5.0.x Lollipop has problem with Javascript that is fixed in the version 5.1.x.

  Thank you

  Abhishek

• I have Acrobat 9.5 and when I try to create &gt; pdf from a scanner, it shows an error "Adobe acrobat has stopped working". Is it possible that I can use this feature?

  I have Acrobat 9.5 and when I try to create > pdf from a scanner, it shows an error "Adobe acrobat has stopped working". Is it possible that I can use this feature?

  Providing you have Acrobat 9 installed in an operating system for which Acrobat 9 is compatible then you can use the feature.

  So, you need a scanner connected, turned on, and the software installed. Acrobat 9 "prefer" TWAIN drivers.

  Always visit the site of the provider of the Analyzer and download - install the latest version of the greatest software.

  n.b., The Acrobat 9.x product family moved in the middle of the "End of Support" year 2013.

  Thus, the family of products Acrobat 9.x is not compatible with contemporary operating systems.

  Be well...

• Error 80070643 and 800f080d on Windows Vista Home Edition

  Hello

  When you try to download windows updates I continues to be faced with error 80070643 and 800f080d. I have to purchase 2010 Uniblue Registry Booster, which was a difficulty of sugested on one of the forums and it says that my computer has no record of mistakes, however, I get always the same 2 errors when you try to download windows updates. I have 18 updates of which NONE will download, all fail.

  Can anyone help please?

  Try to download the updates?

  Windows Update error 80070643
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• MS Updates caused problems "Media Center has stopped working"

  After the MS Updates this week, we have a problem with our Media Center. We have a HP Touchsmart IQ526 running Vista Home Prem when are connected to the Internet and our local cable system. Everytyhing worked almost without problems because we have installed in January. After that MS Updates this week required a reboot, Media Center stops whenever we change the channel - errors "Media Center has stopped working".  Sometimes when changing positions both with the remote control and with the mouse. Is there anything other than a reinstallation of Vista?  Can you help us?

  Hello Cwray

  Please write to the Microsoft Forums.

  This error message can occur if there is some system files corrupted on your computer. I suggest that scan you a file system [SFC] checker on the computer that would be a search for system files corrupted on the computer and replace them.

  (A) the SFC scan enforcement procedure:
  1. click on the Start button
  2. on the Start Menu, click all programs followed by accessories
  3. in the menu accessories, right-click on command line option
  4. in the drop-down menu that appears, click the "Run as Administrator" option
  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
  6. in the command prompt window, type: sfc/scannow then press enter
  7. a message is displayed to indicate that "the analysis of the system will start.
  8. be patient because the analysis may take some time
  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
  11 after the scan finished, close the command prompt window reboot the computer and check.
  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista.
  For more information please visit the link below.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Check whether the problem is resolved.

  B. I also suggest you to rebuild the Media Center data store.
  To do this, follow these steps:
  1. Click Start, type run in the start search box, then click on run in the list programs.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.
  3. in the details pane, right-click right mediacenterdatastore.db and then click Rename.
  4 rename the file in mediacenterdatastore.old
  5. run the file, %systemdrive%\Windows\eHome/mcUpdate.exe
  6. launch windows media center.

  Click on the link below to get more information on media center.
  http://thegreenbutton.com/forums/default.aspx

  C. I also suggest you to check the boot and if you are able to access the Windows media center.
  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Boot stops interference with other third-party software on the computer.
  Steps to perform the clean boot:
  1. click on start, type msconfig in the search box and press ENTER to start the System Configuration utility. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  If the problem is solved, check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• Not Microsoft Windows - bar tasks or the Start button "register Microsoft windows not updated, (he is) Microsoft Windows has stopped working".

  On the computer startup, there is no button or the start task bar.  window appears reading: "Registry Microsoft windows not updated, (he is) Microsoft Windows has stopped working."  I could get on the internet, but I have a blank desktop!  What should I do?  Re-stall the disc?  I have a tower HP w / Vista bought in 2008.  THX, Lizz

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  Let us scan SFC and check that it prevents this error to occur.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.
  To do this, follow these steps:
  a. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  http://support.Microsoft.com/kb/929833
  
  Method 2.
  a. also, you can try again user account if the problem is resolved.
  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   
  b. If the problem does not occur in the new account user set your user account damaged. The steps to fix the corrupt user account are given below.
  Fix a corrupted user profile.
  http://Windows.Microsoft.com/en-in/Windows-Vista/fix-a-corrupted-user-profile
   
   
  Let us know if that helps.

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• WiFi connected but browsers and mail stop working

  Here's the situation:

  iMac, 4 years, OS X 10.7.5

  WiFi connected but, browsers and mail stop working sometimes recently.

  Checked the wifi & browser settings.

  Do not remember something like what happens when connected online cat5.

  Curious to know what is happening.

  Say local store card is perhaps go wrong.

  The machine is only 8 ' of router.

  Another pc on the network does not appear to be a problem.

  Any help appreciated.

  You can connect an Ethernet cable to see if it works on Ethernet when you encounter problems easily?

  Try to use your own DNS server.  Because if the DNS server that you use currently is not translate www.company.com name to IP address nn.nn.nn.nn, it will look like you do not have internet access.

  System Preferences-> network-> advanced-> DNS-> [+]

  OpenDNS.org

  208.67.222.222

  208.67.220.220

  Google DNS

  8.8.8.8

  8.8.4.4

  You can remove them later if you want using the [---] button.

  If this does not work, it could mean that your router is having problems.  Most routers act as the local DNS server, make a cache and especially fair bet as a DNS server provided a front for the access provider.  If the router begins to act, it can often be cleared by power cycling the router.

  And once again, if you provide your own DNS server works, then it could be DNS servers of the ISP, but less likely that they would be getting a lot of complaints from their customers (assuming that customers thought it was DNS servers).

  You know, there are 2 sides to any path of communications.

  If it is technically possible for radio Wi - Fi of the iMac to fail, it's actually not very common.

• HP ENVY Phoenix 810: Tiles and charms stop working

  Tiles and charms stop working. When the tiles stops working (by clicking tile on causes Office Office window to scroll) and I could still access the charm of the research, I ran sfc/scannow as administrator. He showed a couple of corrupt files, he couldn't fix, but on reboot, the tiles and the charms worked again. Have experienced this on four times at this point.

  Seems to have started with the last Windows 8.1 update and is somehow related to the engine OneDrive of synchronization.  I hadn't used onedrive; started using it, and this mess. I disabled all settings onedrive pc and laptop and stopped using it. However, the message "Synchronization engine OneDrive" appears for no apparent reason, and then the tiles and charms stop working.  If I have Outlook and Foxfire open apps, they still work, and their open windows always appear in the toolbar at the bottom. All other app shortcut links that have normally pinned it disappear.

  When I try to shut down the PC, if I can do this via the charm of power, I get a message that it cannot be closed because the "Portrait Display Inc. app prevents close.» There is no such program indicated in the list of installed programs in Control Panel. I understand computer Googling there somehow integrated in the HP PC.

  It is a HP Envy Phoenix 810, with a monitor (not touch) HP, both purchased December 2013. 8.1 Windows running automatic updates; using McAffee All - Access AV, up-to-date. Standard desktop applications. No software of Dingo.

  I see that many other people have had this problem, used the approach of the sfc/scannow, with little lasting effect.

  Plnjmw, welcome to the forum.

  If you have configured the Windows system restore, I suggest go back to a restore point before you started having the problem.  This will tell you if the update is the problem.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Under Vista, I started to get an error message "Superfetch has stopped working".

  I am running Vista and I just started getting an error message 'Superfetch has stopped working' y at - it something I can do to fix this?  I have read a few articles about Superfetch and know that it is a memory management system, but this is as far as I know.

  Hi Anthony-TiloIslam,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Try the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps.