Update for Vista SP2 is no longer available after system recovery

original title: EversinceI has made a recovery system 28/05/2011 back to Vista Service Pack 1, I see not aprompt on Windows update for Service Pack 2.  Why

I did a system restore on 28/05/2011 back to factory default to Vista Service Pack 1.  Since then, when I go into windows update, the update does not prompt to update me to Service Pack 2.  Why.

Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
http://support.Microsoft.com/kb/948343

Tags: Windows

Similar Questions

  • Is no longer, I can download and install the updates for Vista SP2. I get error 80070490

    Original title: Windows of Vista SP2 update fails.  Vista Upgrade option grayed out

    Is no longer, I can download and install the updates for Vista SP2.  I get error 80070490, who reports that Vista Service Pack 1 is no longer up-to-date.  I downloaded and installed the "System Update Readiness Tool" without change in error.  Repair Vista with DVD does not give me the upgrade option.  My SP-2 is corrupt?  Vista Service Pack 2 also went out of support?

    Kind regards

    Ed S.

    Hello

    Method 1:

    Follow the steps in troubleshooting section and check if that helps.

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

    http://support.Microsoft.com/kb/958044

    Method 2:

    You can also read this article and check if it helps.

    How to uninstall Windows Vista service packs as a troubleshooting step

    http://support.Microsoft.com/kb/948537

  • Important updates for Vista SP2 Security Installation failure: update MSXML 4.0 SP2 (KB927978) AND (KB954430) security, citing error Code 652, Windows Update encountered an unknown error!

    Has no significant updates for VISTA SP2 security installation: MSXML 4.0 SP2 (KB927978) security AND (KB954430), citing error Code 652, Windows Update encountered an unknown error! How is it Windows Update does not recognize it's own mistakes? I tried several times to install both of these important updates without success. Please help me so that I can install these two updates & get back on the right track. Thank you!

    See the section "How to get help", for example, http://support.microsoft.com/kb/927978

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    For enterprise customers, support for security updates is available through your usual support contacts.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows updates for vista sp2 fail to install

    Hello

    13 updates to install all has so I installed the updates one at a time. I went with 2 updates KB2286198 (error code 800719E4) and Ko 2183461 (error code 80242014) are still not! I uninstalled Kaspersky Anti-virus since and none of them will install, still not back to...? !

    is there a round work

    Thank you

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  • With no updates for XP SP2, individual users can not use automatic upates to get XP SP 3 like adivsed in the center of downlaod.

    Recently my computer mini Samsung laptop with XP SP 3 (32-bit) [with IE 7 and Microsoft Security Essentials] crashed probably due to virus attack. Provided with the laptop recovery CD was not useful to recover programs. With the help of harware technician, the laptop is running with XP SP2. The data is intact. But I couldn't be updated to SP 3 through automatic updates as UPDATE for SP 2 is abandoned. The Download Center also advises individual users opt for the automatic updates get SP 3, even if this update for SP 2 is no longer available.

    I have XP SP3 installed in your desktop [OEM CD has XP sp 2 only]. Is it possible to save XP SP3 on an external drive and use it to get the SP 3 version into the laptop and activate with the appropriate key.

    Please give a solution.

    Thank you.

    Rajagopal;

    See Martin Stanley to answer a post above about the error:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/cannot-update-to-SP3-after-a-clean-installation-of/85ac9e39-f372-4C91-8777-5c1e015998f5 >>

    Please check the thread below for a possible solution: data by tricky300 -a regular contributor here:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-problem-error-number-0x80240036/5c2fdc0a-3da6-4C3B-9697-a88be681e7c1>

    This is the full installer you need, ignore the warnings about it being for COMPUTER technicians.

     
    UTC/GMT is 08:38 on Monday, December 31, 2012
  • Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240.

    Drivers Vista MSN

    Should Microsoft Vista drivers operate printer Brother HL-1240? I recently downloaded updates for Vista, and now I can no longer print on my printer Brother HL-1240. Updates are perhaps the cause of this problem? If this isn't the case, please let me know if I get the problem somewhere else.

    Hello

    Your question is could a Windows Update may be charged a wrong Brother Printer Driver? Yes.

    One way to know is to look in the history of updates to see what has been installed and uninstall then one that seems incorrect.

    If you are an update of the Microsoft printer driver note that Microsoft updates pilot equipment for other manufacturers are not normally updated.

    Here's how to uninstall specific updates;

    http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

    If an update is the problem and stop it reinstall > list of updates to install > right click on the incorrect update > UAC prompt > and then click Hide.

    See you soon.

    p.s. Always get the latest updates of the driver from the hardware manufacturer.

    Also would it be a good idea if above does not work to download the last direct Brother printer driver; If necessary reinstall your printer...

    http://www.brother-USA.com/downloads/default.aspx

  • KB2585542 for vista SP2 is not listed in the microsoft updates

    Hello

    I have a Windows Vista Enterprise SP2 32 bit OS. where is installed without Microsoft Updates.
    When I ran/scan of Microsoft Updates, MS12-006 (2643584) from Jan 2012 recent PT in which KB2585542 for vista SP2 is not listed in microsoft updates.
    Y at - it an update to install before you get to the KB2585542 in the Microsoft updates.

    You will find appropriate support for Vista Enterprise in IT Pro forums-online http://social.technet.microsoft.com/Forums/en/category/windowsvistaitpro

  • Windows Update, error 80072efd y at - it repair for vista sp2.

    I have a travel mate 5730 and when I tried to update I had Windows Update error 80072efd and have not found a repair for vista sp2

    See the below Microsoft article and try the steps mentioned and check if it works

    http://windowshelp.Microsoft.com/Windows/en-us/help/93b6ab71-8B21-4B50-B40E-abb80eba29271033.mspx>

    UTC/GMT is 15:23 Thursday, September 15, 2011

  • Cannot print on my Laser printer after SP 2 updated for VISTA Ultimate

    After updating vista Ultimate edition with Service Pack 2, I find that I can print is no longer through the network for Samsung CLX-6210-FX color laser printer. I can print directly via a USB card and through the IP - access the Samsung Sync Thru application, but windows network will not print to a printer and then

    What Samsung Support recommends to do?

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

    You can find additional assistance for Vista SP2 problems in microsoft.public.windows.vista.general newsgroup and in this forum: http://social.answers.microsoft.com/Forums/en-US/vistahardware/threads

    ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

  • Automatic update of Vista SP2 won't let windows not load? !! 0xC0000102! 3125/4933 (inkwatson.exe) this is where its decisions

    My Vista Home Basic which is pre installed on my Asus laptop computer did an automatic update to SP2 and then ask to reboot the computer, now I can not start vista it stops to! 0xC0000102! 3125/4933 (Inkwatson.exe). I tried to boot into safe mode (each of them listed) and cannot it stops at Loaded:\windows\system32\drivers\crcdisk.sys. I even tried to use my recovery disc but nothing comes even after pressing F9 only said memory and windows vista boot check in the Tools section... someone can tell me what to do
    I want to reformat the system but can no longer Hat
    Thnks in advance

    https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

    Free unlimited installation and compatibility support is available for Windows Vista, , but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

    Microsoft free support for Vista SP2 at the link above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or repost in the Windows Update Forum:

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost, are kindly Error Codes and exactly what happens when you try to update.

    In this way, you will receive the best help.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or you can try this:

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    And here's the General information regarding the use of the recovery disk:

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then restart with the recovery in the drive disc.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    See you soon.

    Mick Murphy - Microsoft partner

  • No Windows Update for Vista

    I tried everything I know and I can't get Windows Update for Vista.  I tried Fixit, F8 during restart, but without success.

    Hello

    You don't tell us if you get the error codes or not.

    You need SP2 must be installed to support still available for Vista.

    Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

    It will also tell you which SP you have installed.

    Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

    Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

    Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

    Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

    Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

    This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

    http://support.Microsoft.com/kb/947366

    See you soon.

  • Never received SP 2 update for Vista.

    Never received SP 2 update for Vista. What are my options?

    Download from the site takes a few hours.

    Also, there are two versions of 32-bit SP 2 - all languages and five.

    The last one takes less time. Y at - there much difference?

    Thank you

    Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
    http://support.Microsoft.com/kb/948343

    Learn how to install Windows Vista Service Pack 2 (SP2)
    http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  • system essential updates for vista SP1

    Hello everyone, I recently bought a HP Compaq CQ60-305AU with Vista Home Premium SP1 and according to HP system, ESUpdate for vista SP1 pre installed version 1.0.0 . Since then, I've installed all the updates including SP2 Windows. My question is with the software & driver HP web page

    http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093&LC=en&DLC=en&cc=nz&lang=en&product=3938340 there are a number of (System essential updates for vista SP1) available, do I have to install these updates or only the last has a current 6.00 version or do I need to install one of them, now that I have installed SP2?  Any help would be appreciated.

    If all your hardware is working properly, I wouldn't worry on this subject. Critical updates for SP1 should be included in SP2. In addition, normally SP2 will not install if you need updates, which must be made beforehand.

  • KB25844146 & KB2620712 are updated for Vista - "isntalled windows is not updated version"

    original title: KB25844146 & KB2620712 are updated for Vista. Fails to install each timed

    Updated repeat myself that kb25844146 & KB2620712 are updates for Vista Home Premium fails to install every time. Bulletin says its for XP. Installation downloaded and tried of puter is back with "windows installed is not version update". Have Vista home Prem SP2/32-bit. Using trend micro security. Help?

    Hello

    1 did you change on your computer?

    2. how you try to install this update?

    Method 1:

    I suggest you to reset the windows update components and check.

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 2:

    I also suggest you to see link and check.

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 3:

    I also suggest you perform the clean boot and then try to install the updates and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  • How to turn off the constant updates for Vista?

    disable the update

    How to turn off the constant updates for Vista? I'm fed up with them. every day the computer has so much more to do than what I want to do. I put Windows Update automatic to advise me when there are updates available. Update told me that everything is up to date. I turn on the next time and it will automatically download the new 6 * important * uopdates.  XP has never used a parasite like this stuff constantly new download.  HOW CAN I GET RID OF HIM?

    Thank you

    The updates released this week are updated for security. If ignore them, your computer is vulnerable to malicious software.

    http://TechNet.Microsoft.com/en-us/security/bulletin/MS11-Sep

    http://TechNet.Microsoft.com/en-us/security/bulletin

Maybe you are looking for

  • Z440: Z Turbo - replace the m2 SSD?

    I bought a HP Z440 (G1X59EA) a year ago and it came with a HP Z Turbo 256 GB card installed as the OS drive. Now, I want to replace the stick M.2 256 GB on a stick of 512 GB m2 Z Turbo PCIe card and wonder if I can just buy a Samsung MZ-V5P512BW stan

  • Satellite C670 - Recovery Media Creator launch! Error link

    (Google translation)Hello Recovery Media Creator will not start. Missing link, error 'TRMCLcher.exe '.I can't find the software on the Toshiba site!Here's what the file contains Toshiba Recovery Media Creator:http://hpics.Li/6dfd626 Where can I find

  • I have an external HD Lacie 250 GB ms25u. I run a dell diagnostics and it failed.

    Original title: external hard drive I have an external HD Lacie 250 GB ms25u. I run a dell diagnostics and it failed. Smart test-2, smart thresholds function test-2, and targeted reading test-2 Please help

  • cannot print, I get an error saying does not support automation

    windows Vista i run whenever I go to print something I received an error notice saying not supported automation can someone help me please

  • Wired Wireless works, is not

    When I connect to my computer with a wireless router is working very well and I have no problem getting online but when tried to configure a route wireless it doesn't let me go online. All the lights are on (power, WLAN, Ethernet and Internet channel