Update for Windows Vista KB980248: 80070017__ error Code

I tried to install the update for Windows Vista KB980248 but receive the error Code:80070017

"There was a similar issue, published with the proposed solution, being (1)" run the Chkdsk.exe too check the drive for errors"and 2" rename the download folder.  The two were not successful.

I also tried a number of different methods as suggested by MS technical support (see below), but none succeeded, so I hope someone else has also encountered this problem and has a solution.

The steps I've already done: clean boot. downloaded and installed the update manually; high my privileges as a user profile; Services activated window important; disabled user account control; Run the component tool to reset Windows Update in default; Not Windows Installer and then re-recorded Windows Installer; use the System File Checker. installed the updated system preparation tools.

Any help appreciated

After reading the process to carry out a repair for Vista installation, I was not confident I could do given my lack of COMPUTER skills and feared that I would have done something wrong.  But while browsing the site there are other suggestions that I adopted. For example, I downloaded Registry Booster, ran the System File Checker (which I had already done but thought, no harm to do again), and other suggestions are in response to similar questions like mine.  I also ran an another Chk Dsk (I also run this previously).  To restart, as he was driving through the verification process, he said,' windows replaced bad cluster in file name \window\winsxs\x8A9C8~1.226\ 8915cambria.ttc'.  And I was happy, because it was the file you advised has been damaged.  I don't know exactly how it happed, as I said, I had perfomred chk dsk a numer of times before.  I was successfully able to install the update for Window Vista KB980248!  I was so happy after all the anxiety.

Thank you very much Andrew, for your time, assistance and patience. Very much appreciated.

What about the King

Tags: Windows

Similar Questions

  • Update for Windows Vista (KB2491683) security error code: 8009310-B

    For months, I have not been able to install the update for Windows Vista (KB2491683) security.  I get the following error code: 8009310B.  What can I do?

    Maybe this might help you:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-8009310b-with-security-update-for/1d0d66ff-f382-4de7-911b-aabb267f99f3

    It's the new KB but same error and cobaltgrey found the solution.

    LC

  • Windows updates continue to fail. : update for windows vista (KB2378111) security error code: 800719E4

    In particular windows security updates for example updating security for windows vista (KB2378111) error code: 800719E4. With a lot more updates, they continue to fail, but only a couple succeed. When starting my computer in general goes to screen installation of updates. He finished going through step 1 and 2, but never seems to complete step 3 and remains on full where for at least 5 minutes. Then shows that updates were not properly before. Restoration of the changes. This continues to happen frequently now, and after having tried to restart my computer or install a little at a time still does not solve the problem. Also, I tried to use the troubleshooting solutions but did not have much. Don't know what else to do?

    My laptop runs Windows Vista Home premium: service pack 1: 32-bit operating system type.

    0X800719E4 ERROR_LOG_FULL
    The log space is exhausted.

    Transaction for Windows Update logs may be in an inconsistent state.
    You can delete them by clicking the ORB start.
    In the search for cmd field type
    Right
    click on cmd.exe and select 'run as administrator '. Accept the UAC prompt.

    At the prompt, type in the below exactly as written, including spaces, pushing enter after each command

    CD /d %SystemRoot%\System32\SMI\Store\Machine
    attrib s h *.
    del *.blf
    del * .regtrans-ms
    output

    Restart the computer now and see if it can be updated.

    MowGreen
    Expert in Windows IT Pro - consumer safety

    * - 343-* FDNY
    NEVER FORGOTTEN

  • I'm having a problem with the installation of update for Windows Vista (KB973768) security, error code 80073715's anyoe can help me?

    After getting my laptop to factory State, I ran the update of the window and got stuck to the update of security for Windows Vista (KB973768). The error code is 80073715. The update does not always settle anything I tried (reboot, download directly from the website of window, run the diagnostic window and solve problems). If anyone can help me, I really appreciate it.

    ERROR_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT 80073715

    The identity of the manifests are identical, but their content is different

    In a Word, there is a problem with component maintenance (EC).

    The information stored on the content of the file does not match what is present in Windows\winsxs.

    Try another attempt to update. If/when it breaks down, thanks for posting the * last * 50 or if WindowsUpdate.log lines in your answer:

    How to read the Windowsupdate.log file

    http://support.Microsoft.com/kb/902093

    In addition, please include the edition of Windows and the Service Pack level of operating system-

    For Vista \Win7, * right * click the computer on the desktop or the Start Menu, and then select Properties. The information is under "Windows edition".

    04/09 / 1107:46: 58 pm

  • Try to update security update for Windows Vista KB2286198, get error code 80070017?

    Impossible to update a security update

    0 X 80070017-2147024873 - ERROR_CRC
    Data error (cyclic redundancy check).

    Try to manually download the update and install.

    http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB2286198&displaylang=en&sType=s_basic

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • Update for Windows Vista and receive error 80070490 & 643 codes; any ideas?

    Update for Windows Vista and receive error 80070490 & 643 codes; any ideas?

    80070490 = permission denied / [a problem initializing or using session variables] or item not found

    80070643 = ERROR_INSTALL_FAILURE

    http://support.Microsoft.com/kb/958044

  • Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641.

    Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641, who has had a lot of answers posted but none does not seem to work and I tried to install this upgrade for the last 6 months! (I did one where you made sure something is running in the Control Panel, but it works just not - I HATE Vista!)

    Now just got a new error code: 6 to 8.

    The updates, I can't update (!) are:

    1. SQL Server 2005 Express Edition Service Pack 4
    2. Update of security for MSOffice 2007 System
    3. Update for MS 2007 Office system
    4. Update for MSOffice Outlook 2007 Junk email filter

    Unfortunately I'm not technically proficient at all and do not understand the jargon I've read on this site so if anyone has an answer, please could you write it as if you were talking to your grandma who only discovered what a mouse!  ;-)

    Thanks in advance

    Sharon

    original title: error codes: 6-8 and 80070641

    Hello

    see if that helps to fix:

    How to reset the Windows Update components?

    There is also an automatic 'fix - it' here

    http://support.Microsoft.com/kb/971058

    Also, try to put the KB numbers in the search on the link below and then manually download the

    http://www.Microsoft.com/downloads/en/default.aspx

     

    or please repost your question in the correct windows update forum

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  • query on windows update for windows defender KB915597. Error code 800705 b 4.

    Hello. I was wondering if the update above can be installed for windows vista. I get error 800705 b 4 whenever I try to update KB915597 (definition 1.173.1690.0 windows Defender

    Thanks for all the advice with this problem

    Best regards, Maria.

    The update that you are trying to install is obsolete.

    To update manually: http://www.microsoft.com/security/portal/definitions/adl.aspx

    If you need to get the latest updates available, you can download and install from here.

    For all Microsoft security software, you will need to download the anti-malware and anti-spyware updates.

    For anti-malware and anti-spyware, the latest definitions are 1.173.1907.0, date of the May 12, 2014 06:43 UTC.

  • Problem with the installation of Service Pack 2 for Windows Vista. 8024200d error code.

    I have made several attempts unsuccessfully to update my vista using the automatic update for service pack 2, but I always "update has not 8024200d error number". I tried a start-up in minimal mode, but automatic update does not appear. I reached my intellectual limits. What means exactly the error 8024200d mean?

    How do I beat successfully automatically update?
    F....

    Hi Mubarak,

    Can you please tell me the number of KB article of updated with the question?

    Take a look at the response from here-

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/i-am-getting-error-code-8024200d-when-trying-to/b0ae43eb-8e84-4a71-94af-75318c984d45

    Thank you.

  • Update for Windows XP (KB2686509) security - error Code: 0x8007F0F4

    My DESIRE of PC NOT INSTALL the "Last" update of security for Windows XP (KB2686509) - displays the error Code: 0x8007F0F4.

    HOW TO INSTALL?

    And free my PC of repetitive attempts to download & install it...

    You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site

    http://support.Microsoft.com/kb/958051>

  • Windows 7 Pro will be not updated for Windows: fails with the error code 1 (0 x 000000000000001), which is a problem of language pack, version __Pro DON 'T SUPPORT SEVERAL LANGUAGES '.

    Windows colleagues for support.

    My windows install/windows update is broken; There will not be security critical update, installers fail with the error

    code 1, indicating a problem with language packs; I use widows 7 pro for software development.

    Several lanagues packs are not part of windows 7. should I upgrade to ultimate for your problem?

    More sophisticated repair attempt, SFC/scannow indicates corruption, but cannot fix it.

    Hand, install the update package out of work.

    Your opinion is welcome. I have

    Hey Hey Hey Doc K whadu say?

    I solved my problem;

    the problem was owner and permission on my programs, all users, the program data and my programs (86).

    As I type this i / m re - run SFC/verify only and a big pile of sucessfully some updates installed.

    What have I done? I took possession of the special directories above from "TrustedInstaller".

    Even when owned by TrustedInstaller, it does not have permissions. Some places I found rejection specific to the owner of the network.

    -What happened? Do you have a trusted Installer get stuck Mid-install?

    I took possession of SYSTEM, and made sure the CREATOR had every right, as in the SYSTEM and

    USER, AUTHENTICATED USER. I was perhaps too broad.

    I took possession, and then all of the repressed, updates windows are presented themselves to install,.

    and I expect /VERIFYNOW SFC before as I mark this as running.

    I'm fairly certain VS2008 and VS2010 now repair and install.

    Hmmm... always to see funny error message in SFC...

    We need a tool to give an overview of a directory tree ownership and permissions.

    dB

    Hey Hey Hey Doc K whadu say?

  • do not install updated security update for Windows XP (KB2686509) with error code 0 x 80070020

    I have the icon that it is ready to install and the installation fails. I get the opinion of all the minutes for the last 3 days.

     

    Hello

    Perform the steps from the link below and see if it helps.

    You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

    Hope this information helps.

  • Installation of updates for Windows Vista error 80070490 message code

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

    Update security for Windows Vista (KB2378111)

    Update security for Windows Vista (KB967723)

    Update for Windows Vista (KB2345886)

    Update for Windows Vista (KB2443685)

    Update for Windows Vista (KB970430)

    Update for Windows Vista (KB972145)




    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

    Update security for Windows Vista (KB2378111)

    Update security for Windows Vista (KB967723)

    Update for Windows Vista (KB2345886)

    Update for Windows Vista (KB2443685)

    Update for Windows Vista (KB970430)

    Update for Windows Vista (KB972145)




    Hey grown-sexy

    see if the below microsoft information arranges

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

    http://support.Microsoft.com/kb/958044

    If he did not correct it repost in the correct windows update forum below

    It comes to the installation of vista operating system instance

    Use the link below

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    Walter, the time zone traveller

  • Error 80070570 code when you try to install the update for Windows Vista for x 64-based systems (KB972145)

    I'm unable to install the update for Windows Vista for x 64-based systems (KB972145).  Whenever I try, I get the error code 80070570.

    0 X 80070570 - ERROR_FILE_CORRUPT
    The file or directory is corrupted and unreadable.

    Perhaps it is the update itself that is corrupted, try to manually download and install the same:
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=en

    If this does not work maybe reset - WU
    http://support.Microsoft.com/kb/971058/en-us
    How to reset the Windows Update components?

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • Error Code 8E5E0147. Platform update for Windows Vista (KB971644) update for Windows Vista (KB973917) update for Windows Vista (KB976470) fail to install.

    This problem lasts for a long time and I'd like to update my Windows Vista.  Thank you for your time.

    Hello, I sent an email before for support, but I have no answer at all so I tell myself I'll try to ask my question here.
    I get the following error code (Code 8E5E0147) whenever I try to install the following updates for Window Vista.
    Update for Windows Vista (KB971644) platform
    Update for Windows Vista (KB973917)
    Update for Windows Vista (KB976470)

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

    See this previous discussion about this error: http://social.technet.microsoft.com/Forums/en/itprovistasetup/thread/5d5084ec-78f6-427c-a146-91fcf72e3616

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for