Update hard drive to the Satellite Pro L300

Similar Questions

• 2nd hard drive for the Satellite Pro A200

  Hello

  I have the Satellite pro A200 (PSAE4E-03401FDU). The LT has an option for a 2nd hard drive, but it is not included a cable.
  Someone knows the reference to the 2nd hard drive cable?
  Thank you!

  Stand by.
  When you remove the HARD drive to the second HDD can see HDD SATA conector?

• Update hard drive in the MacBook Pro (early 2015)

  What type of SSD will work in a MacBook Pro 13 inch screen of early 2015? I was told by someone that Apple no longer use the SATA drives and they now have their own exclusive hard drives and hard drive connectors. Can someone clarify this for me? I want to upgrade a 256 GB to 500 GB drive.

  New mac systems use style card SSD instead of 2.5 in block style (search for mSATA and M2 style SSD).  Apple uses a protocol of interface owner so you can not buy any card SSD on shelf.

  Another use main contributor a low profile SD card like this http://www.microcenter.com/product/441001/128GB_SDHC_Flash_Memory_Module that can stay connected to the SD slot card all the time and not poke out.  Also external fencing to swap nu-disks for a virtually unlimited storage.

• Can't see the new hard drive on my Satellite Pro 6100

  I bought a new Toshiba 40 GB hard drive for my Satellite Pro 6100.
  I installed it in the Bay, but it is not recognized in the BIOS, or when I try to reinstall using the recovery disk!
  Bios recognize that there are in the car, even if it is not formatted?
  I'm missing something?

  Thanks in advance

  Neil

  It should work!

  The reader should also be recognized that even he is not formatted...

  3 things you can do:
  At the start you can go in bootmenu and check if the drive is recognized on the 1st controller.
  If this is not the case, check the configuration of the drive (master, slave, CSEL).

  If this is not enough to check the toshiba support website and download the latest version of the bios (probably you already have, check as mentioned above)

  If this does not work your new drive (or worse: your controller) could be faulty. If the reader of the Moose still work on your laptop, check the 40 GB drive to another laptop or PC with adapter ATA connection normal.

• 8 issues of the new owner of the Satellite Pro L300

  Hello to all forum users!

  I bought a new Toshiba, the Satellite Pro L300 laptop and have until January 14 to test - if it looks like it is not working properly I will return it to the store where I bought it.

  Here is a list of questions I have:

  1. whenever I turn on the laptop or it is suspension or hibernation mode, and when I disable it, the cd/dvd drive makes a clumsy mechanical noise.

  It seems to me like the cart that transports the laser and optics is running in a mechanical stop.

  Is this normal?

  2. There is a hot sub-pixel on the screen (in blue) and according to the Toshiba info in the box, this is normal and does not return.

  Should I worry about this?

  3. when I run the test memory at the start of the system, she says she'll start windows automatically at the end of the trial and show me the results of the test.

  It performs the test, Vista boot, but I see no reports of results.

  Where can I find the report?
  Is there a known issue with this test?

  4. the service program Toshiba to perform diagnostics of slot Vista does not work. Whenever I run the test (PCdiag.exe) I get an error message Vista saying a defect was found in the KERNEL32.dll module.

  Where can I get a fix for this?
  I have already installed the updated files on the Toshiba web site for the "Value Pack", which is where this utility, but still not the error message.

  5. I want access the settings of the bios at startup, but have not found a way to do it again.
  F2 gives me a menu for memory test or normal boot system.
  ESC is not me in bios Setup either.
  There is a utility for bios Toshiba that I can run Vista, and I see that any upgrade bios firmware should also be done through Vista.

  Is there a way to access bios at startup?

  6. I would like to run XP on this system and realized that this model (Pro L300 PSLB1E) is compatible XP, and I should be able to download all the drivers from Toshiba to run under XP.

  Does anyone do this?

  7. the laptop and configured Vista Basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for "Vista OEMAct Business." I was captivated by this laptop as the option to revert to XP Pro with Vista business. The box did not come with any CD or DVD and no manuals explaining how to install Vista Business.

  This is reason enough to return the laptop in the store where I bought it, which is a chore, I prefer to avoid if I can install Vista Business.

  Can someone help me understand what is happening here?

  8. is there a way to contact technical support by e-mail?

  Thanks in advance to anyone who can answer all of these questions!

  Hello

  Two weeks ago, I worked several days on friends Satellite Pro L300. Your questions are interesting and I will try to provide an answer or comment.

  1 this is normal behavior. I noticed it on other models of computer laptop too. Right now I use Satellite P200D and I noticed the same thing.

  2. of course, you may have noticed a dead on the screen pixel and more on what you can read on
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ8702EI0000R01.htm

  3. maybe follow links can help a better understanding:
  http://web1.Toshiba.ca/support/TechSupport/TSBs/all/-TSB001369.htm
  http://www.bleepingcomputer.com/tutorials/tutorial146.html

  4. what to say about this? I t has not noticed this error and I can recommend just reinstall full VAP. Remove preinstalled system, restart your computer and install the latest version of the Toshiba download page.

  5. When you start the laptop downstairs you can find info how to enter the BIOS settings. It usually takes F2. I really don't understand what is wrong in your case, but must work F2. Press immediately after turning on your laptop. Press several times. You have to work

  6. If you can find the download page of drivers, tools and utilities on Toshiba Windows XP Home edition, you should be able to install and configure Windows XP Home edition on this model of laptop. For the installation of Windows XP edition family please use Windows XP SP2 home edition.

  7. This must be clarified with your local dealer. The fact is that Toshiba doesn t offer any CD/DVD and recovery DVDs must be created by the owner of the laptop. I presume that you didn t seen or read Toshiba reminder about it. This point explains exactly what needs to be done.
  The recovery media can be created using the preinstalled Toshiba Recovery creator. The shortcut is placed on the desktop.

  8. I'm afraid, you must contact the hotline, but as far as I know Toshiba's toll-free hotline.
  Call and ask if there is something you want to know.

  Good luck!

• How to replace the hard drive on the Satellite A100-301?

  How to remove the old hard drive (deceased) and replace it with a new hard drive on the Satellite A100?

  I don't see that there is a harddiskbay that is easily accessible.
  Do I have to take off the whole backcover?

  Hello!

  On the bottom side of the laptop's HARD drive cover is fixed with a screw.
  Remove the screw and cover, then you can exchange the HARD drive.

  Good bye

• You can plug an external hard drive to the iPad Pro?

  can plug you an external hard drive to the iPad Pro, I store all my technical documents on one and what you need to know if there is a way to connect to the iPad

  You can't plug an external hard drive on an iPad of any type.

  There are external hard drives that can create their own wifi network

  to which you can connect to your iPad. Your favorite search engine should

  provide more details.

• Need help to remove the hard drive from a Satellite Pro M10

  Hi, a good will would point me in the right direction. I am trying to remove the HD from a satellite pro M10.
  I discovered the net without success.

  A diagram with being usefully etc.

  kind regards J

  Hello

  I can't give you a diagram or something, but I can give an indication to take a look on the front left side of your machine. On this corner of the left side under the volume control is a small blanket where the HARD drive is in. You need only to unscrew the 2 screws that are accessible when you turn on your machine and and look at the bottom of your machine. Do you know what I mean?

  When you remove these 2 screws, you need to remove the HARD drive by taking some screwdriver flat-blade and paste between the disc cover and HARD case. Then carefully remove the cover of the HARD drive and you can recover the HARD drive with the cover and exchange it.

  Voila, your hard drive West. It s is not difficult at all.

  But if you still have some questions then request.

  Welcome them

• Trouble with the Satellite Pro L300 Ethernet controller driver

  Hello

  I bought a Toshiba Satellite Pro L300 Model (PSLB9A - 064022)

  Put XP Pro/SP2-Having trouble with the Ethernet controller driver.

  I downloaded the driver from the appropriate list (Toshiba support) only network via another PC memory = car lappy

  Realtek_LAN_56861032008_XP.exe

  install
  installed in a folder named c:\ "DELL"-(WHICH can not be move?)
  drivers R86360
  OF this dossier, I do the "setup."

  broad com 440 x - installs as everything is good,
  made just TWO yellow controllers.in etha...
  \
  but isn't she suppose to be integrated realtek 10/100 Mbit / s Ethernet TX.

  Can someone please point me in the right direction.

  Thanks in advance...

  Steve

  Hello

  It seems that the Australian model, try this one:

  http://file.MyToshiba.com.au/file/Download/Resource/File/13002/Realtek_LAN_56861032008_XP.exe

• Failed to retrieve the Satellite Pro L300 laptop using Toshiba Recovery Disk

  I have a Satellite Pro L300 Vista I'm trying recover using the recovery disk Toshiba official that the machine is not able to retrieve from the hard drive.

  The process gets as much as to start recovery utility and asking to select the language in the utility recovery which I emphasize English and then select next; It moves on the next screen, which is empty and then it just hangs.

  Any suggestions?

  You bought your laptop with the Vista version English?
  What language is marked before selecting English?

• No driver audio for Satellite Pro L300 - Vista in function

  Hello world

  I just bought a Toshiba Satellite Pro L300, I have a system dual boot Vista - Ubuntu.
  I have problems with ubuntu - after about 6 hours to get etc wireless keyboard shortcuts to work.

  So I deleted the Ubuntu partition.
  I log back on Vista (no dual boot now), everything is fine with Vista except that it says there is no audio driver.
  So I get my drive recovery off load a fresh Vista on the same problems.

  Does anyone think they can help?
  Blake was soon.

  Hello

  You mean you used the recovery disc Vista Toshiba and redefine the laptop to factory settings, but the sound is still not available?

  Hmm. This strange boyfriend
  Check Device Manager and remove the sound card in the list of devices.
  Restart the computer, and then reinstall the audio driver that is on the page of the Toshiba driver.

  Check it out and please inform us of the results

• How do the initialization of the new hard drive in the macbook pro 2012 model

  I can't the initialization of a new WD hard drive in my macbook pro 2012.

  I installed the new drive and restarted with disk Warrior

  and followed the instructions to press option, command-R.

  When I followed the Protocol to download a new OS, disk utility does not see the newly installed

  HD, what to do?

  < published by host >

  Use disk utility to format drives, no Warrior drive

  How to install OS X on an external drive connected to your Mac - Apple Support

  Drives external Mac OS Extended format before using with Aperture - Apple Support

  http://support.wdc.com/knowledgebase/answer.aspx?ID=1362

• Replacing the hard drive on the Satellite A200-1JS

  How can I replace my hard drive Satellite A200?

  http://img509.imageshack.us/my.php?image=jojjooooojonn7.jpg

  Remove the HARD drive to the back and pull it out. I look at this picture I say: move the HARD drive to the left and it will be free.

• Can I use 2 hard drives on the Satellite A200-1YX

  Hello, who knows if it can work 2 hard drives on the A200 1YX.
  In the manual is written there are 2 locations for hard drives, but it says that for some models of Satellite A200.

  Can I use 2 HDD on Satellite A200-1YX?

  As mentioned by user above, different Satellite A200 series are present on the market.
  Some supports 2 hard drives and some as a single HARD drive.

  But both series are equipped with a second Bay I recommend you simply remove the cover plastic that holds the second HARD drive Bay and check if the HARD drive connectors are available.

  Good bye

• How to install the second hard drive in the Satellite A200-1 of body weight?

  I see my new Satellite A200-1 of body weight has two hard drive bays, the research in the second span, I don't see how a second drive can be mounted as the plug into the Jack seems to be missing.

  What parts do I have to mount to place a second drive that they are held in stock by out of the local computer and are quite cheap, can someone advise me on part numbers etc of the bits I need.
  Thank you
  Steve

  Hello

  I know that this empty place for second HARD drive is a bit confusing, but the same situation is with my A200-1CR. The fact is that some A200 models come with 2 hard drives and laptop case design this place must be prepared for this second HDD.

  But this does not mean that each A200 can be improved for the second HARD drive.