Update/install does not work.  Said the required program is unable to run.  What can I do?

Similar Questions

• Wireless controller does not work, said the controller is not an installed device

  My "network controller" does not work it says... And he did my wireless doesn't work don't as well.
  It happened when I installed Windows 7 Ultimate on my Acer Aspire 5542 G. It just says: the network controller is not an installed device or something. I'm not smart with this kind of thing. So can somebody seriously help out me?
  I tried to go to the main web site... But nothing will do it. 0: Yes... And I even tried updating the driver but he just said that he does on windows update...

  Theres 4 here wireless LAN drivers . Select Notepad / sucks / 5442G.

  But you will need to know if its Atheros QMI or Foxconn.

  If this is the wireless on board. If its got one? in Device Manager, double click on it go to the Details tab / change hardware ID's for one of the entries, copy and paste it here.

  Or if you want I could have a glance with teamviewer.

  You'll see what I'm doing. If you get it give me the ID and password, it gives you

  Or if you have Skype, my Skype name is the same name I use here

• Windows Server Update service does not work after the installation of KB2720211

  I have a Server 2008 SP1 32-bit Standard, which had the role of Server Update for the Windows software installed connected to a WSUS upstream server and everything worked, with 17 clients connected to him and get everything their approved patches.  It was a new server starting with WSUS added at this time 1 months ago.  He had to be upgraded to SP2 S2008 which I did and WSUS have continued to function.  After being on SP2, there was another 152 patches to be applied and after that WSUS does not work anymore.  It appears 1 patch that has been applied has been KB2720211 that seems to cause problems for a number of people.

  The problem is that the update service does not start.  An error message comes back that the service has not responded in a timely fashion and I can't find the log files anywhere on what it is.  Here is what has been done so far all that in the same issue:

  1 deleted WSUS and restarted and installed it again.

  2 Remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  2.1 install SQL Management Studio and logged to an internal database SUSDB and checked it is not set to single user (I believe it is set for multiuser name but I'm going from memory)

  3. install the KB2720211.

  4. installation KB2734608

  5 remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).

  I am looking for any information on how to solve what is the question, because there is nothing in the log files I can find and no event in the windows event viewer.  I am ready to start with the server however if there is something I can look at to possibly solve the problem, please let me know.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Tab key does not work at the macro program

  Hello

  We have an in-house custom macro program that fills the fields in a web page displayed by Firefox.

  It is the window handle of the field with the circumflex, sends a string of WM_CHAR messages to fill it with text, sending a WM_CHAR message with a TAB character to change areas and repeat the above for the next field.

  This morning 15 Firefox updated itself, and now the program macro does not work. Specifically, Firefox is no longer changes fields form when it receives a tab character, and everything goes in the first field.

  No idea what happened?

  Better yet, there is a topic a chance: parameter of config to change to make it work again?

  Failing that, is it possible to revert to the previous version of Firefox 15?

  Thank you.

  Jack

  Good... ignore the above. It is a real problem with the update of Firefox 15, but a member of our staff has designed a work around for our macro program.

  See you soon.

  Jack

• My password does not work and the computer won't let me? What caused this and how to fix it?

  Friday when I signed up computer turned off, everything worked very well. Today it lit, and all of a sudden my password does not work. I had the computer about two years and everything was fine with the same password. Someone might have tried to sign without the correct password - would he have it? I don't know what to do, but must enter into the system! Any sugguestions?

  Friday when I signed up computer turned off, everything worked very well. Today it lit, and all of a sudden my password does not work. I had the computer about two years and everything was fine with the same password. Someone might have tried to sign without the correct password - would he have it? I don't know what to do, but must enter into the system! Any sugguestions?

  If you have a Vista DVD, please use this tutorial from Microsoft Support:
  http://support.Microsoft.com/kb/940765/en-us

  Here's another same tutorial, but from another source;
  How to regain access to your administrator account tutorial link For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I've heard people say vista service pack 2 32-bit does not work in the vista programs running vista sp 1 32-bit well my lovelys it does because I've done today.

  because ive got the vista sp 2 intructions how in adequate stall me mate vershia to mircosoft so if you do not want it if accessories write him an email. and I send it to you so that it works wright for you or you can call me 07876645741 uk your the DREAMCATCHER. PS JUST THOUGHT I WOULD HELP PEOPLE THERE PROBS ARE C.

  because ive got the vista sp 2 intructions how in adequate stall me mate vershia to mircosoft so if you do not want it if accessories write him an email. and I send it to you so that it works wright for you or you can call me 07876645741 uk your the DREAMCATCHER. PS JUST THOUGHT I WOULD HELP PEOPLE THERE PROBS ARE C.

• NTP does not work in the nexus program 5500

  Hello, I have a cisco switch connected to the 5500 nexus that syncs with the ntp server, but the link is not.

  This is the ntp configuration.

  NTP server 10.1.32.3 key 1
  NTP server 10.1.32.4 key 1
  NTP source-interface loopback0
  authenticate the NTP
  NTP-1 md5 authentication key hidden 7
  NTP - approved key 1

  interface loopback0
  Description management
  IP address 10.1.32.1/32

  management of vrf (config) # ping 10.1.32.3
  PING 10.1.32.3 (10.1.32.3): 56 data bytes
  64 bytes from 10.1.32.3: icmp_seq = 0 ttl = 253 times = 0,733 ms
  64 bytes from 10.1.32.3: icmp_seq = 1 ttl = 253 times = 0,797 ms
  64 bytes from 10.1.32.3: icmp_seq = 2 ttl = 253 times = 0,909 ms
  64 bytes from 10.1.32.3: icmp_seq = 3 ttl = 253 times = 0,923 ms
  64 bytes from 10.1.32.3: icmp_seq = 4 ttl = 253 times = 0,902 ms

  (config) # ping 10.1.32.4
  PING 10.1.32.4 (10.1.32.4): 56 data bytes
  64 bytes from 10.1.32.4: icmp_seq = 0 ttl = 254 times = 1.271 ms
  64 bytes from 10.1.32.4: icmp_seq = 1 ttl = 254 times = 2,409 ms
  64 bytes from 10.1.32.4: icmp_seq = 2 ttl = 254 times = 2,457 ms
  64 bytes from 10.1.32.4: icmp_seq = 3 ttl = 254 = ms 2,487 times
  64 bytes from 10.1.32.4: icmp_seq = 4 ttl = 254 times = 2,467 ms

  the debug ntp output all:

  2015 Ms 2 14:58:11.016496 ntp: ntp_sigchld_wait_and_fetch_status: waitpid() returns with status of 27071
  2015 Ms 2 14:58:11.017354 ntp: ntp_sigchld_wait_and_fetch_status: child Non - ntp is out! Don't like!
  2015 Ms 2 14:58:27.064185 ntp: time of day sending upd standby
  2015 Ms 2 14:59:57.064168 ntp: time of day sending upd standby

  What could be the problem?

  Hello

  The output of the show ntp peer-status seems correct and the * indicates at this time there is sync was from the 10.1.32.4 server.

  The Show ntp status command is for a different purpose. According to the command reference the 'indicates if Cisco Fabric Services (CFS) is enabled or disabled for the purposes of NTP and know if a fabric lock is in place, because a configuration is in progress'. NTP distribution is discussed in the Distribution of NTP CFS of the configuration guide.

  Concerning

• My oki b2200 printer does not work, but the lights are flashing i dnt know what to do

  I already delet and printer announcement once again.   and I see 2 green lights and 2 flashing umber yet blinking.its only a month old printer.

  Hello

  Because it's only a month, it should be under warranty.

  Contact the manufacturer of the printer for their support.

  See you soon.

• Lightroom does not start because the MSVCR110.dll file is missing? What can I do? Thank you

  Tried to install vcredist_x64 but it still won't start

  HI Fritz,.

  As MSVCR110.dll is part of the Visual Studio 2012 runtime in order to correct the lack of DLL error please follow these steps:

  1. first of all uninstall the following runtime libraries

  Go to control panel > programs and features > uninstall Microsoft Visual C++ Redistributable(*64) and Microsoft Visual C++ Redistributable (* 86)

  2. restart the computer

  3 Download Visual C++ Redistributable for Visual Studio 2012 updated 4 of the official Microsoft Download Center

  4. restart the system and then try to launch the application.

  Please let us know if it helps.

  Concerning

  Sarika

• Test Panel does not work with the PXI-6541/6542/6551 in PXI-1002

  Ripping my hair out trying to get the Test Panel can work with system as described below:

  1002-PXI chassis with controller PXI-8176.  In the three places available (from left to right) PXI-6551, PXI-6542 and PXI-6541.  They come in NIMAX, they self test, reset and to calibrate.  But when I try to open a Test Panel, I get an error as follows:

  nidmfpan.exe - Application error

  The application failed to initialize properly (0xc0000142). Click OK to close the application.

  I uninstalled, re-installed, modified and repaired everything NIDAQMX (15.0.1) 15.0 HSDIO, NI-VISA (15.0.1), etc.

  Original symptom is that when I pressed the button on the test Panel, nothing would happen.  Then, the next symptom is that MAX has said MFC90.dll (not found) and MSVCP90.dll (not found) and MSVCR90. DLL (not found).

  I can not find help topics or the forum messages that cover this.  Very annoying.

  Hi fully,

  Sorry to hear that!  Nidmfpan.exe is the process that opens MAX test panels and MFC90.dll is a Windows wrapper.  Combinations of driver reinstall or copy other MFC90.dll files in System32 are unlikely to solve the problem.

  You are on XP?  Try to navigate to C:\Windows\System32 and rename the nidmfpan.exe.manifest to nidmfpan.exe.manifest.back and after close/reopen MAX file and try to open a test Panel.  Is it effective?

  Note that the file you want to rename is nidmfpan.exe.manifest and NOT nidmfpan.exe.

  If not immediately successful, close and reopen the MAX and try the test panels a few times more.  If after several attempts it still does not work and the correct manifest file has been changed, it can point to a deeper problem of Windows that requires a reformatting of the OS.

  Really that's hope!

  P.S. you might get more visibility to a problem as it is in the sections "PXI" or "Digital i/o.  VXI and VME are not widely used these days, so this section of the forums is probably not too much traffic.

• Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  Packer of creative cloud in creating a package that I can install do not.  He goes through the motions, download all updates, create setup file, but it does not work despite the fact that there are no errors in the log files

  After hitting my head against the desk to repeatedly create packages, try on different computers I have finally found a solution.

  These packages have been copied on an external drive, if I try and install from the external drive, which is a common practice, it fails.

  If I then copy this file pkg from the outside, to the computer I install, then run it, it will to and moved very well.

  That is mind-boggling stupid, because it's rare that you have to copy the file into any computer, it is less always installed off the coast of externally, and many people in the company are pushing on the network and the management of the suites so there is a serious problem in Adobe package manager if this is the case where it cannot manage the Middle installed offshore.

  I hope that if anyone else is having problems so it suits.

• I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  I try to install the update of PS CS6 can read files camera raw Nikon D800.  The exe file fails and says trying to install the application manager.  I did it and the update still does not work.  Now what?

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

  If this fails, attach a screenshot of the error message if it is in English.  otherwise, quote it.

• Update/install updated C3 does not work

  Update/install updated C3 does not work.

  Computer is an Apple C5 Desktop OS 10.5.8, Dual 2.7 GHz PowerPC, 3.5 GB of DDR SDRAM.

  I use applications Adobe C3, which now requires updates.  When an Adobe product needs an update, an update notification dialog box appears.  I click ok to download and install the Adobe updates to all my products.  I saw preferences indicating the C3 and a number of other applications.  I click on continue and the download begins.  Installation does not seem to happen or at least it is / was no indication except noting a percentage of completion passing.

  The problem is that this process continues and continues and continues during and in the course of every time I clicked on continue.

  When I could see the preferences once, I deselected all downloads there.  I then clicked on continue.  Unfortunately, the process has continued and continues and continues whenever I clicked on continue to download, but not to the best of my knowledge.

  There is no error message.

  This problem occurs for every download of the update.  I have to click Cancel to stop this process so that I can continue work on computer.

  Help, please.

  Bud Willner

  Many gave to the buggy auto update and go to the page updates, get them from there and run them locally.

  http://www.Adobe.com/go/gntray_dl_updates

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate.

  I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
  I have an acer

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - XY9X3 - JDXYP-6CJ97
  The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
  Windows product ID: 89583-OEM-7332157-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0 x 00000009
  Build lab: 6002.vistasp2_gdr.110617 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF}1.9.0027.06.0.6002.2.00010300.2.0.003x 64*-*-*-*-6CJ9789583-OEM-7332157-002112S-1-5-21-923204104-223683984-168055983Acer Extensa 5630 Phoenix Technologies LTD.V1.30 20090319000000.000000 + 00070333507018400FA04090409US Mountain Standard Time(GMT-07:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
  Installation ID: 004511331255365043724851364501374781338933223323713385
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 6CJ97
  License status: Notification
  Notification reason: 0xC004F063.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  SLIC ACRSYS ACRPRDCT
  ASF!            OEMID OEMTBL
  SSDT BrtRef DD01BRT
  SSDT BrtRef DD01BRT

  Ah! -in this case, it is not necessary.

  I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033

  Open the Windows Update - click the link view updates installed on the left of the page

  in the list, find the WAT update KB971033, and then uninstall it.

  Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033

  redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?