Update iOS 9.2 does not

My son upgraded his phone to iOS 9.2 and now it has a screen with just iTunes and the presentation of the form.  He tried to restart the phone and nothing.  Any suggestions on what we need to do to get the phone working again?

The iTunes icon and cable image means he went into recovery mode - there need to connect the phone to iTunes on his computer and who should recognize that it is in recovery mode and let it reset it to the factory settings, and it can restore and then his backup

Tags: iPhone

Similar Questions

  • After updating IOS 10 wifi does not work on my iphone anymmore 6

    IPhone 6 c

    IOS 10

    after update Wifi makes connections but wifi symbol disappears immediately after the connection.

    functions of the iPad without problems. Reset hardware doent change the problem.

    What could be the problem.

    You must first check your Wi - Fi router: check if other devices can be connected. This will let you know if there is a problem with your Wi - Fi router. You can restart your router and restart the connection to WiFi.

    Make sure that Wi - Fi and you can see your network

    Go to settings on your iPhone > Wi - Fi and check if it is enabled. And if there is a blue check mark next to a network name means that your iPhone or iPad was connected to this network.

    Restart your iPhone/iPad, router, cable/DSL mode

    If this does not help, reset your network

    On your iPhone, iPad, got to settings > general > reset > reset network settings. This will reset Wi - Fi networks and passwords, cell parameters and VPN, and APN settings you used before.

    These measures should help.

  • 10 iPhone update iOS 6 - phone does not

    Hi all

    I downloaded the update iOS yesterday (on the phone). The phone has been restarted several times and showing some strange screens (black on top and Red bottom split 30/70). I left the phone at night, connected to a charger this morning because it was showing only the apple (on white background) logo.

    I tried to turn it on and now it is completely dead, does not (black screen).

    No idea what I can do now. I intend to go to the Apple store later today I hope that they will be able to solve the problem.

    The phone is out of warranty now (iPhone 6) should I worry about this, after all, this is the update just went horribly wrong?

    you have a computer running iTunes if yes plug it into this and perhaps save and restore

  • Update iOS yesterday again does not help Revel update.

    Yesterdays iOS update still does not help the revel update. Hoped Apple update would fix the path of Revel, but not so much.

    Please see the post below updates on the issue of the revel facilities:

    Problem installing Adobe Revel 2.3.2

  • Update iOS 9.3 does not work

    Whenever I try to update my iPhone 5 with updating iOS 9.3, after accepting the TERMS, I get an error message telling me.

    Impossible to verify the update
    iOS 9.3 failure of verification because you are no longer connected to the internet

    I tried on my wifi at home (a quick system of Virgin Media)

    I tried using the system telephone service provider 4G

    I tried then that connected to my iMac

    any ideas please?

    Hi UncleSlacker,

    Looks like you see a check warning message on your iPhone 5 s when you try to upgrade to the latest version of iOS. Article in the link below should help you to solve the problem in throughout the process of removal of the update of iOS and download it again.

    If you can't put day to iOS 9.3 on your iPhone 5s or earlier, iPad Air or an earlier version, or iPod touch - Apple Support

    See you soon.

  • My new iPhone iOS 9.1 does not appear on my iMac screen 10.6.8.  I don't want to upgrade to El Capitan.  Is there a solution?

    My new iPhone iOS 9.1 does not appear on my iMac screen 10.6.8.  I don't want to Snow Leopard upgrade to El Capitan.  Any suggestions?

    CarbonCopyClone on an external drive in an external enclosure.  Upgrade than SL ElCapitan leaving the intact internal SL.  Start externally using the option key pressed at the start, do what you need with the iPhone, then stop and do what ever you need to again with SL disc.

    Cludgy, but it works.  I keep my SL still functional because there iDVD, but use updated OSXs for other purposes.

  • My update of the software does not work

    My update of the software does not work and I can't return to the main he keeps on telling me to restart the computer and then go through the software update settings, then it ends by does not and then it tells me to restart and restart and restart again and again

    What updates you trying to install?

  • Checking update Java plug-in does not show latest version after update same

    Checking update Java plug-in does not show latest version after update same

    You exit and then restart your browser after Java update in order for the right version of Java to display the Plugin Check page. I felt it necessary to do so.

    See also:

    Other - you should check your Plugins and update as needed.

  • After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?

    After software update today, my password does not work.  My phone is now disabled.  I don't have a backup.  How can I start to use my phone again and not lose all my content?  Help, please.

    You can not

  • Hello! I restored my iPhone 5 because IOS 9.2 does not work well, and now the IPhone does not recognize the SIM CARD ☹️ please someone help me! What can I do?

    Hello!! Recently, I have restored my iPhone 5 because IOS 9.2 does not work well. But now my iPhone does not recognize the SIM CARD.

    I Don' t know what to do, help me please

    You get an error message?

    What did he say?

  • 6 iPhone with iOS 9.2 does not and freezing when I try to turn on + WiFi freezes

    6 iPhone with iOS 9.2 does not and freezing when I try to turn on + WiFi freezes cannot allow him. (When I get to start the Iphone by pluging it to Itunes)

    I've done a new install and reset the network settings.

    But always the same questions

    Thanks a lot for your help

    I have the same questions and more from Friday December 11 when I've upgraded to iOS 9.2.

    Device: iPhone 5 s

    Problems:

    -Screen freezes randomly reboot * required (sometimes restart by the camera itself)

    -Sometimes device reacts very slowly on the command (or even then restarts)

    -For the most part within the first hour when used, sometimes immediately (after restart)

    -Cannot slide or apps to react when I touch

    -AssitiveTouch on, keep available however to move and opening, but no order accepted when the screen is in gel

    Resolution of problems so far:

    -Reset all settings (no result)

    -Backup on iTunes (11 dec)

    -Erase content and settings and restore the backup to iCloud (10 Dec *) (no result)

    -Erase content and settings and restore the backup of iTunes (11 dec) (no result)

    -Tried with the new iPhone camera 6 and restore backup icloud (unsuccessfully; restore hangs at "1 minute remaining")

    -Tried with the new iPhone camera 6 and restore backup of iTunes (no result: same freezing questions reappear)

    Conclusion date: is not a hardware problem (device), but one software: combination of the configuration (such as backup) and the new iOS 9.2.

    By the way: I guess that not possible to restore 9.1 on the device.

    The new iPhone 6 initially contained iOS 9.1, but then did not 'see' backups, because they were made from a 9.2 iOS device.

    So I had to first install the iPhone 6 as a new iPhone, upgrade to iOS 9.2 and then I was able to reset and restore the backup (with no good result, as described above).

    *) restarts: hold Home-button on/off-button simultaneously for 10 seconds

    backup *) in the form of clouds 10 Dec worked without problem on iOS 9.1.

    I will continue to investigate on removing the apps installed a year or two, see if that generates the result.

  • Update of Windows XP does not work, error 0 x 80245003. Cannot be updated to SP 3, can't update IE 6 to IE 8. How to solve these problems?

    Update of Windows XP does not work. I tried the correction of the error 0 x 80245003 and nothing has changed. Fix, that it won't work because SP 3 is not installed, because of the Windows Update does not. I try to install SP 3 manually, then downloader windows will not install reference SP 2 must be installed. SP 2 is installed. So I tried several ways to solve this problem, and I keep running into roadblocks of Windows. Help, please.

    Hi my NameJoel,

    See the methods mentioned below and check if that helps.
     
    Method 1:
    How to troubleshoot an installation fails on Windows XP Service Pack 3
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then the firewalleither blocks information or allows information to pass to your computer. If the information is blocked or throughdepends spent on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.
     
    See also:
    You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
    http://support.Microsoft.com/kb/943144
     
    Steps to take before you install Windows XP Service Pack 3
    Note: Disable your antivirus software is not usually recommended, some software antivirus prevents certain system changing files. This can cause the Windows XP SP3 installation failure. To make sure that you manage to install Windows XP SP3, temporarily disable your antivirus software, including any third-party antispyware and firewall program. To do this, right-click on the icon for your antivirus program, and then click on disable. The antivirus program icon typically appears in the bottom right corner of the computer screen.
     
    Important: Make sure that you enable the antivirus software after you install Windows XP SP3.
     
    Hope this information helps.
  • Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

    My computer stops the update via WIndows Update Component

    Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

    My computer has a few updates, but can not run these update

    Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

    He starts to run updates 1 of 13... and stops

    If I shutdown normal e, computer stay likehanging 1 hour without stopping.

    I would like to know how to solve this problem

    Thank you

    Concerning

    Gladmar.

    Hello

    Were there any changes made on the computer before the show?

    Perform the following methods and check:

    Method 1:

    I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

    a. click Start, type services.msc and press enter.
    b. search Windows Update.
    c. right-click on the service and select Properties.
    d. in type of startup, select enable.
    e. click Start under the Service status.
    f. click OK.
    g. Repeat steps c to f for the following services:

    Background Intelligent Transfer Service
    Cryptographic services

    If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

    Method 2:

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Method 3:

    Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

    Disable the antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 4:

    The problem with Microsoft Windows Update is not working

    http://support.Microsoft.com/mats/windows_update/

    See also:

    Troubleshoot problems with installing updates
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Updates: frequently asked questions


    http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

    I hope this helps.

  • After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

    Original title: screen saver does not start because MSVCR100.dll was not found

    After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

    ScreenSaver: Photo screensaver.scr - unable to locate component.

    This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

    The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

    Help, please. Thank you.

    Hello

    It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

    But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

  • update from Sony site does not recognize my OS.

    I run windows vista edition Home premium on my vaio. update from Sony site does not reconoize my BONES. help Sony tech was unable to solve the problem after 15 contacts over a period of 2 years. I was not able to get the vaio updates since the question has been raised.

    I'm sorry, but your problem seems to be with Sony.

    Sony is responsible for all their updates for Vista operating system support, they delivered, not Microsoft.

    See you soon. Mick Murphy - Microsoft partner

Maybe you are looking for

  • ITunes deleted tons of my music

    Last year, I ripped my entire CD collection and put them on my mac, with the intention of going completely digital. I didn't delete any music, and I'm not kidding with my iTunes since then. The only change I did was sign up for Apple music, then canc

  • What windows and Boot Camp for MBP 13 end 2011

    I have a MBP 13 end 2011. I want to install Windows 8.1 to launch my CAD software. I use Boot Camp Assistant 6. I run on OS X and have 4 GB of ram. Is this ok or are there other options recommended?

  • DeskJet 3070 does not

    I bought a new Deskjet 3070 and it doesn't work.  I've been in touch several times with the help of HP in Singapore, and 12 days later I still don't have a resolution.  I, has so far, spoke with Michelle in customer service, Rachel in technical assis

  • Windows has blocked some programs

    I kept receiving a ball at startup so that windows has been blocking some programs, so I improved my administrator status and entered diasable all and now can't do anything.  Help, please!

  • I can't read attachments.

    I save on laptop and can usually read some message, but the rest is just jibberish.  This prevents printing. Any suggestions would be much appreciated.