Update / migration ACS 4.1 to 4.2

Hi all

I have a few questions about the migration of a Windows ACS server.

Currently we are running on ACS 4.1 / output 4.1 Build 23 (1)

We have a contract of active support for the ACS 4.1 (CSACS - 4.1 - WIN - K9).

Now, we want to switch to ACS 4.2 but it with some remarks.

(1) we need to upgrade our contract to CSACS - 4.2 - WIN - K9?

(2) if we have improved the contract can we download the new software ACS 4.2 of the CEC or do we need to buy the CD?

(3) we want to install the ACS 4.2 with all latest patches on a new server, so, too, that this will be a new IP address.

(4) do we need copy all data from ACS 4.1 to 4.2 this thanks to a restoration or a database sync of ACS 4.1?

(5) by using an eval for ACS 4.2 and the upgrade version then licensed 4.2 ACS needs an eval version uninstall? I read this on the discussion on: https://supportforums.cisco.com/thread/1002944?tstart=900

For point 4), I found that we first have to ACS4.1.1.24 before progressing on the path ACS4.2.X is that correct?

Link: http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/installation/guide/windows/install.html#wp1080517

If anyone can answer this question, it would be great.

Kind regards

Philippe

Advertisement

Philippe,

(1) there is no need to upgrade your contract, you are entitled to GBA 4.2 If you have a valid contract for ACS 4.1.

(2) you will need to open a TAC case and get the software published for you, you don't need to buy anything.

(3) that is fine, install a new copy of ACS 4.2.0.124 and then import your 4.1 backup base.  After that, you can improve the new 4.2.1.15 ACS ACS patch 3.  4.2.1.15 ACS patch and 4.2.1.15.3 ACS are available on cisco.com here:

http://www.Cisco.com/Cisco/software/release.html?mdfid=281458142&flowid=4398&softwareid=280805677

(4) No., you can restore a 4.1.1.23 database in 4.2.0.124.

(5) as you want to go with a new installation and upgrade of the database I want to uninstall the Eval before installing 4.2.0.124.

-Jesse

Tags: Cisco Security

Similar Questions

  • Update/Migration from 9i solaris (32-bit) at 4 knots RAC (10.2.0.4) Linux

    Source is on the single box with knot Conc Manager(Admin node) + DB under Solaris 8 (32 bit) and 1 App node(Forms/web) and version of the App is 11.5.10.2 and DB version is 9i (9.2.0.8).

    : Migration Plan target will be the 4 RAC on Linux 64-bit node and 1 Application under Linux 32-bit node.
    Target database is 10.2.0.4 and the version of the App 11.5.10.2



    My question is: is there another available method to migrate to Linux 32-bit solaris (64-bit).

    Using Note 9i process Import/Export for Oracle Applications Release 11i [ID 230627.1]

    Using the note above we can update/migration of 10.2.0.4?

    and for the application, I will use the migration to Linux version of Oracle Applications 11i [238276.1 ID]

    Please comment.

    Thank you
    Pavan

    So basicallly source steps and preparation of the source system so that the export must be made using metalink Note 230627.1

    Correct, if you're on 9iR2.

    and implementation of the target must be performed using 362203.1, if it is 10.2.0.4 is 1135973.1.

    Fix.

    Thank you
    Hussein

  • Thunderbird won't launch. Update / migration screen appears

    I've updated to Firefox / Thunderbird. Since then, open Thunderbird gives the Council-information update Thunderbird 38 main screen. By clicking on the label of upgrade/migration has no effect. I can't enter the program Thunderbird itself. No other versions are running. It's my wife's cell phone.

    Sorry, but leaving aside the (important to me), windows in chrome with things like reducing the buttons and tabs.

    This page on your image is here. https://support.Mozilla.org/en-us/KB/new-Thunderbird-38 bt, I do not see if your seeing in Firefox or Thunderbird or what.

    The page will appear in a tab, but without the rest of the screen, I can't be sure.

  • CSCuv73286 - update VMware ACS 5.5 to 5.7

    Fearly disappointed with Cisco ACS team development, there are still problems with the upates (as it always has).

    I see in the support tools that this bug was listed as status: fixed.

    It has not listed 'released fixed' and describes the Bug, only a work around (any difficulty) tool.

    Does anyone have an idea what this "status: fixed" contains?

    * I want to x - Matt that Cisco would finally write packages of fixes for ACS & ISE that actually works for the most part... *.

    Best regards

    Jarle

    We had just the same thing happen to our ACS. I thought that I would update the secondary ACS first... just to be sure there is no problem. Teaching secondary, to update with no problems. So I thought that I was go to go on the primary... no! The system crashed. Thank God, I made a backup before the upgrade. I opened a TAC and they sent me the above discussion. They even said it's just not all the time. Cisco's thanks for the warning! So I asked to have my TAC shipped the next morning to help with the reimage and back all on line and never had a call or email for assistance.

  • Update/migration 4.1 and 5.1

    My current environment:

    ESXi 4.1 with vSphere Essentials 2.  A virtual machine running vCenter.

    I just bought a new server as a third host and want to update my 5.1 environment, keeping the functions of vCenter on one of the original hosts.

    With 5.1 having a device available, there is a way to migrate a computer virtual 4.1 to 5.1 unit?  Is there an advantage gained by the use of the device, rather than just upgrading the virtual machine 4.1 and 5.1?

    All hardware, software, and licensing requirements are met, then it is a matter of best practices and the path options.

    Thank you!

    Yes you need a 5.1 vCenter - either the device or upgrade your vCenter existing or have a new installation of vCenetr 5.1.

    If you are insterested unit how to define the implementation of the device - and create a new host pt ESXi 5.1 move your ESXi hosts to the new vCenter how environment you can upgrade hosts

  • 9.3.3 update/migration planning apps to 11.1.2.2

    I'm at the next step in our upgrade of 9.3.3 11.1.2.2 and ready to migrate our planning applications. I have read many of the posts related to it and have a general list of the steps, but I have a slightly different situation than what I've seen posted before.

    To summarize, we have installed 11.1.2.2 on new servers.  Our old 9.3.3 is still running on different environment.  I have correctly completed the following:

    1 Foundation Services Shared Services installed and up and running, and users/groups correctly migrate.

    2 Essbase and EAS and up and running.  All Essbase applications (except for planning applications), were migrated successfully of 9.3.3 to 11.1.2.2.

    3. the planning has been installed and is operational.  While there is no apps planning in the new system, I can open planning via the workspace administrator.

    So the next step is to get my apps of moved/transferred the 9.3.3 planning environment for the new 11.1.2.2.

    To complicate matters, we are through to the SQL Server repository 9.3.3 to Oracle in our new 11.1.2.2.  So the first thing we did was to create a new Oracle schema for our planning app repository and using the developer SQL migrate Wizard, we have migrated/copied tables and data from the old Oracle's SQL Server.  It seems that all the tables and data have been properly copied to Oracle.

    Our old planning application is called PlanTest. The owner of the application is a native user called planadm.  My planned migration plan (and my questions) are:

    1. create a new empty planning called PlanTest into account application planamd 11.1.2.2 native?

    2. If I use my new Oracle repository for this soft white, it will eliminate the old data converted or he will try to upgrade/migrate it?

    3 or... should I take a backup of my new first converted repository.  Then drop/recreate the Oracle schema (so no tables) and let Planning to build the repository when I create the Virgin Planning application?  Then capture the owner SID in the new table HSP_USER.  Stop planning. The backup of the overlay on the newly created repository 9.3.3, then replace the owner SID info. Then restart Planning.

    * My concern: the structures of repository planning app table matches between 9.3.3 and 11.1.2.2?

    4. open Planning and hope that the PlanTest application appears!

    5. use Planning Upgrade Wizard to complete the migration and upgrade of the repository.

    6 push/Create app to Essbase.

    7 export data from old app in .txt file loading and reloading in planning new cube.

    8 convert/migration of business rules using information from John's blog.

    I don't know that I missed something.  Suggestions or comments on these steps would be appreciated.  Bottom line is I need to get this app (and several others) migrated successfully with all the metadata, rules of security, forms, etc..  Their reconstruction from scratch is NOT an option.

    In addition, to clarify.  It is a classic planning application.  We do not use EPMA.

    Thank you

    Mike

    It would probably make things even simpler if the owner of the application has been changed to the default Administrator account before the upgrade.

    In any case, it has been included before, but

    create a blank planning application (any options) with planadm

    store the SID code in the table HSP_USERS

    stop planning, dropping the schema, import the 9.3.3 the same pattern,.

    updated the SID in the HSP_USER to that stored.

    Start planning

    Update app

    and so on

    See you soon

    John

    http://John-Goodwin.blogspot.com/

  • Update | Migration - Cisco TelePresence Content Server

    Hello...

    I have a physical camera TCS M2, I would like to upgrade to the latest version 7. XX verified but it is apparently not possible to perform this procedure for the unit of these versions. What are my options? Is there a version compatible with the model of this device? My solution would be virtualization? Can someone help me with a possible solution?

    Best regards...

    You mention that you're running a TCS M2, which is a second generation aircraft, non - UCS Server?  If so and you want to stay on this material, you can run TCS S6.1 up to S6.2.1 as a virtual machine on that server.

    TCS S6.2.1 Release Notes

    TCS S6.2 VM Installation Guide

    If you plan on TCS S7.x running, you must migrate the TCS to the virtual device, you can run it either on a third generation or fourth generation TCS device or third spec-server meets the minimum requirements.

    TCS S7.2 Release Notes

    TCS S7.1 VM Installation Guide for existing customers

    If you need more information or help, suggest that you move your thread to the telepresence of forums where these devices are most active section discussed.

  • 11.1.1.1 to 11.1.2.3 Update/Migration

    Hello

    One of my clients is looking for their current environment of 11.1.1.1 to 11.1.2.3 migration. They have planning applications.

    I got new servers with Windows Server 2008 R2 64-bit environment.

    We have the old instance on 11.1.1.1 version.

    I expected someone comment please and let me know if that seems fine.

    1. install 11.1.1.1 to new servers

    2. apply the patch of maintenance to 11.1.1.4

    3. application and its export data

    4. an install 11.1.2.3 on the same server

    5 import the request and other

    Below the Blog post by John Goodwin will help you:

    More of life than that...: EMP 11.1.2.3 installation and configuration changes

  • Update/migration 2.5 to 4 on the other server vCenter

    I read the vSphere Upgrade Guide. In particular at page 49 the topic "upgrading to vCenter Server on a different Machine and keeping the existing database" seems to correspond to what we intend to do.

    We have a 2.5u4 physical vCenter with SQL 2005 local and we wish to migrate to vCenter 4 on a local virtual machine with 2008 x 64 with SQL 2008.

    Some questions I have:

    Q1: What happens to all the 3.5u4 of ESX host? Are they automatically made the new FQDN to the new destination server name? Are they members of the same cluster...

    Am I basically look the same except for: a) I am now on vCenter 4; (b) my vCenter server name is now different and GUESTS know this change.

    Q2: What happens to all Virtual Machines? They are members of the same groups / pools of resources etc.

    Basically, T1 & 2 are the same, the guide does not seem to explain what happens after the process upgrade/migrate as clearly as I would like.

    Q3: What time is it "safe" uninstall the SOURCE server vCenter?

    VCP3 32846

    VSP4 VML-306798

    All the guests reconnection and cluster reconfiguration will be done automatically. You don't have to do anything manually after the migration. Please make sure that the users and groups who use VC inherited is available on the new configuration also.

    I think it will be a good idea to uninstall VC inherited when vCenter 4.0 is operational and works correctly with all the hosts and reconfigured clusters.

  • Update/migration EBS 11i to EBS R12.2

    Hi all

    EBS 11i

    OEL 5

    Anyone able to get ebs 11i ebs r12.2?

    Can you share me notes/blogs for the task above?

    Thank you very much

    JC

    https://blogs.Oracle.com/stevenChan/entry/revised_ebs_12_2_getting

    Oracle E-Business Suite version 12.2: technical planning, road and Go-Live Checklist (Doc ID 1585857.1)

    Hopefully soon I'll see one created by yourself when you have completed your upgrade

  • Update/migration - vCenter Server 5.0 on windows-> vCenter Server Applicance 6.0.0 U2?

    Hello, I'm trying to upgrade vSphere for a customer of 5.0 to 6.0.0 U2. I don't foresee any problems with the upgrade of the host, but I'm having a terrible time to vCenter Server upgraded. SSL problems, inventory Service won't start/db issues, etc. This is a very simple configuration with only two hosts, a DS3524 for the shared storage and a vCenter server running on a windows virtual machine. I am simply considering implementation installation vCenter's existing disposal and replacement with a new device. What, exactly, would I lose, do this? vMotion, HA and DRS is put to the top, but nothing fancy or automated.

    Thanks in advance.

    -arthur

    Because your environment is small, I think that a better option is really build a new vCenter from scratch and then guests are leaving the former vCenter to the new... of course, you will lose all historical data (statistics, task, events) of the old host and you will need to re - create clusters on the new vCenter configurations.

    Here is a KB showing how to move an ESXi to one vCenter to another: VMware KB: move a managed ESX ESXi host to a vCenter Server to a different Server vCenter

  • Problem with update of version 4.0.3 to 4.1 of ACS

    Hello world

    So I want to update our ACS 4.0.3 to 4.1 and I've heard of the provided adobe MigrationTool we, fantastic.

    The problem is I'm kind new to ACS and, ridiculously, I can't pass the first step, I mean I found the log4j on our disk library, found a 5.1.14 connector j and called the command-line to procceed. (Stop apache tomcat first and also tried to stop, as well as mysql and all combinations between them).

    Then I put two pots on the same folder as migrationTool and wrote on the command line:

    Java - cp com.adobe.adept.migration.MigrationTool log4j-1.2.16.jar;mysql-connector-java-5.1.13-bin.jar;migrationTool.jar o out.txt


    That's what I get:

    0 [main] INFO com.adobe.adept.util.Initializer - beginning of initialization

    0 com.adobe.adept.util.Initializer [main] info - environment is 0

    0 [main] ERROR com.adobe.adept.util.Initializer - could not read the configuration

    0 [main] INFO com.adobe.adept.util.Initializer - end of initialization

    16 com.adobe.adept.persist.sql.connection FATAL [main]

    Exception in thread "main" java.lang.ExceptionInInitializerError: required lack of property: com.adobe.adept.persist.sql.connection

    at com.adobe.adept.persist.DefaultSQLDatabaseConnection.getRequiredProperty (DefaultSQLDataba seConnection.java:75)

    at com.adobe.adept.persist.DefaultSQLDatabaseConnection.establishSQLConnection (DefaultSQLDat abaseConnection.java:100)

    at com.adobe.adept.persist.DefaultSQLDatabaseConnection.createSQLConnection (DefaultSQLDataba seConnection.java:176)

    at com.adobe.adept.persist.DefaultSQLDatabaseConnection.createConnection (DefaultSQLDatabaseC onnection.java:51)

    at com.adobe.adept.persist.DefaultSQLDatabaseConnection.acquireConnection (DegaultSQLDatabase Connection.java:60)

    at com.adobe.adept.migration.MigrationTool.run (unknown Source)

    at com.adobe.adept.migration.MigrationTool.main (unknown Source)

    I tried to download the new mysql connectors, install the most recent versions, substitute on this line. Tempted to surf on com.adept.persist.sql.connection on MigrationTool.jar (which does not exist) and I am completely lost, any ideas on what I should do?

    Thank you in advance.

    Under Windows, the tool of Migration (and fulfillment.war) expects to find the production config file to C:\config\fulfillment-conf.txt

  • Patch level ACS migration: 4.1.4 Bundle 13 - > 5.1

    I'm migrating ACS 1111 devices running ACS version 4.1.4 build 13-1121 ACS ACS version 5.1 devices.

    In the migration process, it is stated that:

    "The machine of migration must be a Windows platform that is running the same version of ACS (including the fix) as the source machine.

    and with regard to the supported versions:

    "You must install the latest patch for versions of migration supported listed here. In addition, if you have another version of ACS 4.x installed, you must upgrade to one of the supported versions and install the latest patch for this version before you can migrate to ACS 5.1. »

    If I check the web associated with ACS version 4.1.4.13 download page, there are many opportunities for software to download from 4.1.4.14.1 and goes up to 4.1.4.13.20.

    How do I now which is the patch installed in my system if the ACS Web Interface only provides the information "4.1.4 build 13?

    Thank you

    If you have installed the patch, ACS web interface also displays the patch level. See the attached screenshot

  • ACS migration utility

    Hello

    I use the Migration utility to migrate a 4.2 ACS to an ACS 5.2.

    Shape the newspaper I see the migration is completed successfully, however, No 4.2 object appear in the ACS 5.2.

    > Is there a way to check the ACS 5.2 database because the migration failed despite the "success" message in the log of the Migrator?

    Now I'm 'migration' ACS manually, which is a little bad...

    Kind regards

    Thibault.

    Hello

    Migration can be a bit tricky and when I ran into this issue before that it was because the changes have not been actually migrated to ACS.  It's actually a 2 step process:

    (1) Analyze and export (this creates the files to import into DCC 5 locally on the migration computer.

    (2) import - this import actually data in DCC 5 (this is the most often missed step).

    In addition, here are some useful tips if everything goes well for your migration:

    1) begins with a new database and import your first set of objects, if you don't like it you can use the command 'acs reset-config' command line to restore ACS to factory default.

    (2) after that you have the first series of imported objects take an EC of backup, when you go to import your next series of objects and you end up not liking is where imports put objects you can restore that backup and do not lose your previously imported data that you liked.

    HTH

    -Jesse

  • ACS 3.3 to 5.3 migration

    Hello

    I would like to migrate ACS 3.3 to 5.3 smoothly. To do this, I want to redirect GBA 5.3 unknown users in the old one in 3.3. I define ACS proxy but I do not know how to set up the 'Access policies' and 'Service selection rule' to tell about ACS 5.3 to redirect unknown users on ACS 5.3.

    Could you help me for this config or give me an example of configuration.

    Thanks in advance

    well well

    You must set the server RADIUS identity under users entry and identity stores pointing your ACS 5.3

    You then define a sequence, identity that lists the databases currently deployed on your DCC 5 first, followed by the entry that you have defined for ACS 3.3.

    the link of this sequence of identity to your strategies of identity for services already defined.

    --------------------------------------------------------------------------------------

    Please don't forget to rate correct answers

Maybe you are looking for