Update/migration - vCenter Server 5.0 on windows-> vCenter Server Applicance 6.0.0 U2?

Similar Questions

• Migration vCenter database of the local instance to a remote server

  Hello

  My vCenter database is installed on the local server with the vCenter server.  When installing without DSN was created because the local database.  Now, I need to create a dedicated server to host the database but can't find where, in the current installation, I would like to change to vCenter point to the new location.

  I read these KBs

  KB.VMware.com/kb/7960893 - movement of the SQL Server to vCenter database
  KB.VMware.com/kb/5850444 - migration vCenter Server on a different host machine
  KB.VMware.com/kb/1003928 - troubleshooting the database data source used by the VirtualCenter Server

  Problem is that (1) there is no DSN, (2) the registry key is not there either, and (3) I cannot find what to change in the vpxd.conf file

  I am able to "migrate the database" and "can create a new dsn to point to the new location.

  So, the question is where can I find the current configuration of the database\dsn.

  I hope that's clear

  Hi VMGenie,

  The reason why it does not appear THAT DSN u is because your machine VC can be 64-bit and the vCenter uses 32-bit DSN settings.

  Open the C:\WINDOWS\SysWOW64\odbcad32.exe folder for this exe... it should show u the DSN settings.

  Please consider clicking correct or helpful if this information is useful.

• update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

  update of sql server 2005 service pack 3 error code 6D9E Windows update security does not accept the update

  Hey lasdj,

  Thanks for posting in the Microsoft answers site!

  If you receive Windows Update error 6d9e while installing SQL Server 2005 Service Pack 3 by using Windows Update, it means that the installation folders and directories are compressed or encrypted.

  To fix this problem, make sure the folder locations where you are installing the service pack to aren't compressed or encrypted, or specify a different folder and then run Windows Update again.

  Therefore, remove the compression of the DATA directory and run together to the top again.

  Remove compression from the C:\Program Files\Microsoft SQL Server folder and see if you are able to install the updates without any problem.

  See the links below for more details:
  
  Windows Update error 6d9e
  http://Windows.Microsoft.com/en-IE/Windows-Vista/Windows-Update-error-6D9E 

  Install SQL Server 2005 and 2008 failures (compressed DATA directory)
  http://blogs.msdn.com/psssql/archive/2009/02/24/SQL-Server-2005-and-2008-Setup-failures-compressed-data-directory.aspx

  I hope this helps!
  Gokul T - Microsoft Support

• I'm Zenith one 733F error Code when I try to install Windows Vista update to SQL Server 2005 (Service Pack 2 KB970895).

  I'm Zenith one 733F error Code when I try to install the latest Windows Vista Update, which is an update to SQL Server 2005 (Service Pack 2 KB970895).  This update has failed several times now.

  I followed the advice given in a separate post in this forum at Ramer49 to perform a selective startup with msconfig to try to run the update with all Microsoft Services disabled.  This does not solve the problem.

  I spent reviewing the logfile under C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log.  The problem highlighted is that the Services of Services SQL2005 database program did not start.  Here is an excerpt from the log file...

  Product Installation status
  Product: SQL Server Database Services 2005 (MSSMLBIZ)
  (Previous) product version: 3077
  Version of the product (Final):
  Status: failed
  Log file: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log
  SQL Express features:
  Error number: 29503
  Error description: error MSP: 29503 The SQL Server service could not start. For more information, see the

  I tried to run the problem file (SQL Server MSSMLBIZ) directly by using the Windows administrative tool, but the file does not seem to start successfully.  Event Viewer log contains an error with event ID = 823.

  I don't know what to do next.

  Can someone help me?

  Thank you.

  Take a look at this link as it covers a way to fix this problem. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• updates - updates has not pushed to remote clients (Windows Server 2003)

  original title: critical updates

  Hello

  I have an Windows Server 2003 with Windows XP Pro SP3 clients/members area and allows you to push critical updates for WSUS clients.

  However, updates are not pushed to the remote clients even with the connected VPN tunnel.  The only time updates are pushed to these remote clients is when they visit the office and connect to our LAN.

  Is there a way for remote clients to get their updates without having to remove them as a member of my domain?

  Thank you...

  Forum specific support by WSUS:
  http://social.technet.Microsoft.com/forums/en-us/winserverwsus/threads

• Windows Update will not install the hotfix on Windows Server 2008 R2 Service Pack 1 KB3122648

  Hello

  I tried several times to install "MS16-019: Description of the update of security for .NET Framework 3.5.1 in Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1" on a Windows Server 2008 R2, running Service Pack 1

  Windows Update has always ends with 'Failure' / has encountered an unknown error. Code 80073712

  The convenience store has not solved it either.

  The server is not really exposed to 'outside' as such, runs in a local network, regular, small; but sometimes, a web browser may be in use.

  Is there anything that can / should be done here to remedy the failure of the installation? Or free time and even not to worry about this?

  It would be great to have a few strong indications here. Thank you!

  System File Checker shows errors that are likely to cause problems with Windows Update. I would like to reinstall Windows Server 2008. That said, I have no direct experience of Windows Server 2008, so I'm not really able to help you.

  The Microsoft Community Forums are intended to provide support in hand to hand for users of Microsoft products. These products are not Windows Server 2008. You can request additional assistance through the TechNet forums:
  https://social.technet.Microsoft.com/forums/en-us/home

• Problem migrating Vcenter server from the old cluster to the new cluster?

  Hey guys,.

  Just came across this situation, and I don't know what to do. I pass my vcenter server older glomerulus with hosts of esx4.0, to a more recent cluster with hosts of esxi4.1. The material of host machines are different generations, and vmotion don't migrate vcenter because of the cpu sets between cluster mismatch. If I could turn off the virtual machine and migrate it would work, but since it's my vcenter Server I can't do.

  Should I restore it on the new cluster?

  Thanks for the suggestions/tips

  Kevin

  Connect directly to the ESX host using your client vsphere, vCenter vm shutdown, vCenter remove inventory, then go to the new host, browse the data store on the vCenter vm is, and add the vCenter Server inventory.

  This assumes that the same storage is presented to both hosts.  If this isn't the case, you will need to use winscp or something similar to copy the files from the virtual machine.

  -KjB

• Manually install the update on the Server 2008 R2 - FATAL: unable to connect to service (hr = 80004002)

  When you manually install Windows updates on our server, we get the following error message:

  Setup Windows Update Standalone - Setup has encountered an error 0 x 80004002 - no such interface taken in charge.

  What follows is also found in windowsupdate.log

  2016-01-26 21:26:47:489 8340 1 b 10 Misc = process: C:\Windows\system32\wusa.exe
  2016-01-26 21:26:47:489 8340 1 b 10 Misc = Module: C:\Windows\system32\wuapi.dll
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - COMAPI: IUpdateServiceManager::AddScanPackageService -.
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - ServiceName = Windows Update stand-alone installation
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - ScanFileLocation = C:\97a2ae7429fcb9d0e21f1eb1a047983b\wsusscan.cab
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI FATALE: unable to connect to service (hr = 80004002)
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI WARNING: failed to connect to the service. (hr = 80004002)
  2016-01-26 21:26:47:489 8340 1 b 10 COMAPI - exit code = 0 x 80004002

  Is there a way to repair the wusa.exe?

  Sorry, evil forums. Server issues are better managed on Technet. TechNet - Microsoft forums

• A security update for SQL Server 2005 Service Pack 3 (KB970892) could not istall

  "A security update for SQL Server 2005 Service Pack 3 (KB970892) istall failure."

  I'm not sure if this is the right place to post this but I hope I can get help.
  I can't get the update mentioned above to install after several attempts. Have searched the knowledge base and tried various suggestions of solutions without success.
  If anyone has or had this same problem and it is resolved, I'd appreciate knowing how and where to get information. Thanks in advance for your help and your computer happy.

  Rhamnar68It

  "A security update for SQL Server 2005 Service Pack 3 (KB970892) istall failure."

  I'm not sure if this is the right place to post this but I hope I can get help.
  I can't get the update mentioned above to install after several attempts. Have searched the knowledge base and tried various suggestions of solutions without success.
  If anyone has or had this same problem and it is resolved, I'd appreciate knowing how and where to get information. Thanks in advance for your help and your computer happy.

  Rhamnar68It

  It isn't really the right place (better would have been the forum of Windows Update ), but see the following thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/cafab790-e540-40d3-87ba-4f64e6e82d54/

• Do not install the update for SQL Server 2005 Service Pack 3 (KB970892) security code error C0000005

  Do not install the update for SQL Server 2005 Service Pack 3 (KB970892) security code error C0000005

  This update didn't install when I used Vista and is still unable to install now, I updated to Windows 7.

  Have searched for a solution for months with no result. Reason why I updated.

  Any help much appreciated.

  DOUGY,

  Microsoft SQL Server 2005 Express Edition Service Pack

  Post here for assistance:

  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  --

• INSTALL update for SQL Server 2005 Service Pack 3 (KB970892) security FAILURE

  A security update for SQL Server 2005 Service Pack 3 (KB970892) WHO CAME through AUTOMATIV UPDATES will NOT INSTALL ON MY PC. Why not?!
  And the Microsoft web site is very helpful in this area. Please get this sort

  You can post on this specific forum: SQL Server Setup & Upgrade
  http://social.msdn.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads/

  or if this is related:

  Error code when you use Windows Update or Microsoft Update to install updates:

  '0x737D '.

  http://support.Microsoft.com/kb/978597 [all OSS]

  TaurArian [MVP] 2005-2010 - Update Services

• Update error - SQL Server 2008 SP1

  Hello

  I am using Windows 7 Ultimate 64 bit

  I installed VS2010 Trail, then I installed SQL Server Express Studio

  My Windows shows update there is a update for SQl Server 2008 Service Pack 1

  But when I try to install this update

  I get an error like below

  Error Code 84 B 20001

  a few times with error below

  WindowsUpdate_20000001 WindowsUpdate_dt000

  What should I do to fix this

  Thank you

  Harsha

  RedandBlue,
  The link Shalini gave about the clean boot procedure provides detailed instructions on the use of MSConfig.  I think you have just misunderstood the steps listed above.  When you open msconfig, click on the button beside selective startup. Then uncheck (clear) the box "Load system services" and "Load Startup items" and then apply and restart.

  If you have not seen this thread , you can read through it, because it covers the same error you see. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows update fails to initialize wuauclt.exe and window update will not work.

  Windows update fails to initialize wuauclt.exe. Update history shows update Cumulative security for Internet Explorer 9 for Windows Vista (KB2699988) has failed. Command window appears every 20 seconds in train to run wuauclt.exe and closes instantly.

  I tried to restore to a restore point prior (Windows Vista Home Premium 32 bit Service Pack 2). I also run AVG Anti-virus (no virus not detected) and Microsoft Fix it Microsoft difficulty he says he finds and correction of errors in windows update, but the problem persists.

  Any help is appreciated.

  Hi Patrick_Sims,

  1. you receive an error with the message code?

  2. what Fixit did you run?

  Method 1:

  You can reset Windows Update components and check if it helps:

  How to reset the Windows Update components?

  For more information, you can also refer to the following article:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  Method 2:

  You can try to install the stand-alone package to update based on the version of Windows Vista installed and check if it helps:

  For Vista 32 bit.

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2699988)

  For Vista 64 bit.

  A security update cumulative for Internet Explorer 9 Windows Vista x 64 Edition (KB2699988)

  For more information, see the article:

  My PC running the 32-bit version or 64-bit Windows?

• Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  Error code 80242FFF when you try to install security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)

  I've read other discussions on error code 80242FFF.  Based on suggestions from Microsoft technical support, I tried Mncrosoft Fixit.  Also, I started my computer in mode safetboot and tried to update.

  They did not work.  So, will you be able to help me find a solution?

  Thank you

  Ken

  Hello

  1. is that the copy of windows is enabled?

  2 is the issue limited to the installation of a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2699988)?

  I suggest to perform the steps in the following article and check.

  Method 1: run the Windows update troubleshooting tool and check.

  The problem with Microsoft Windows Update is not working http://support.Microsoft.com/mats/windows_update/

  Method 2: I suggest you to put the computer in a clean boot state and check if Windows update installs successfully.

  To help resolve the error and other messages, you can start Windows vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows vista and windows 7:
  http://support.Microsoft.com/kb/929135

  
  Note: When you are finished troubleshooting, follow these steps in the section above to reset the computer to start as usual.

  Method 3: If the problem persists, follow the steps in the following article.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

   

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

  How to back up and restore the registry in Windows

  b) while running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

   

  For reference:

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414

  Note:

  un) Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ( )

• KB2675157 of a security update cumulative for Internet Explorer 8 for Windows Vista fails to install

  Maintains a security update cumulative for Internet Explorer 8 for Windows Vista (KB2675157) do not install - tried "fix it" and that did not work - any ideas?

  Hello

  1. don't you make changes on the computer before the show?
  2. what difficulties did you try?
  3. do you get an error message?
  4. are you able to install some other updates?

  Method 1:
  You can perform a clean boot, and then try to install the update and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  Try to manually download and check.
  Update cumulative security for Internet Explorer 8 in Windows 7 (KB2675157)
  Also check the link for more details.
  MS12-023: for Internet Explorer Cumulative security update: 10 April 2012
  http://support.Microsoft.com/kb/2675157
  
  Method 3:
  If the problem persists you can try the procedure described in the supplied knowledge base article and check.
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry
  WARNING: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive.