UPDATE MOTHERBOARD

Similar Questions

• Satellite A200 - update motherboard

  Hi, I'd like to update my graphics card, but I have read that I have to upgrade my motherboard to do this. Is this true? I want to improve to be able to play 3D games. Motherboard should I go to? I have a Satellite A200.

  I believe that this document can give you an answer to your question
  http://APS2.toshiba-tro.de/KB0/FAQ7A01ZW0007R01.htm

  The card mother and video card are designed, you cannot upgrade the video card in a series later.

• Holly AAHD2-HY Pegatron Bios Update motherboard

  Is someone can you please tell me if there is an update available for the motherboard bios above.  I have upgraded to windows Pro 8.1 with Media Center.  My system information is below.

  Name of the Microsoft Windows OS 8.1 Pro with Media Center
  Version 6.3.9600 Build 9600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of the system
  System manufacturer Hewlett-Packard
  P6-2100 model system
  System Type x 64-based PC
  SKU QW795AA #ABA system
  A4-3420 APU AMD processor with 2 logical processors, 2 Lossnay, 2800 Mhz, graphics HD Radeon (TM)
  BIOS version / Date FRIEND 7.15, 16/12/2011
  SMBIOS Version 2.7
  Embedded Controller Version 255.255
  UEFI BIOS mode
  Baseboard manufacturer PEGATRON CORPORATION
  Model baseboard is not available
  Name of plinth base
  Role of platform office
  State of secure boot not supported
  PCR7 Configuration binding is not Possible
  Windows directory C:\Windows
  System directory C:\Windows\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "6.3.9600.17196".
  Eastern Daylight Time zone
  Physical memory (RAM) installed 8.00 GB
  7,49 GB total physical memory
  4.49 GB available physical memory
  15.0 GB total virtual memory
  12.0 GB available virtual memory
  Page file space GB 7.50
  Paging file C:\pagefile.sys
  Hyper-V - VM monitor Mode Extensions Yes
  Hyper-V - second level address translation Extensions Yes
  Hyper-V - virtualization enabled in Firmware No.
  Hyper-V - data execution Protection Yes

  Hello MattNC79,

  I understand that you are looking for an update of the BIOS of your desktop PC HP Pavilion p6-2100 using the card mother AAHD2-HY (Holly). Unfortunately, I couldn't locate an update of the BIOS for that motherboard at this time.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• bios update motherboard M2N68-(Narra5)

  need a update in order to run the hard drives of 4 t. 6.01 running 29/09/2010.

  You don't give much info system, but here are the basic system requirements, you must use a plu 2.2 TB HARD drive

  Need a 64-bit operating system
  * Motherboard that supports UEFI [successor to the BIOS]
  * Support for GPT partitions [instead of MBR]

  Your system meets these requirements?

  If you found my answer helpful please say thank you by clicking the s cursor Up icon. Thank you!

• Update motherboard on a DC7700 Sff

  Hello.

  First of all, sorry if this is in the wrong place. IM new to the forum stuff. Also, sorry if this has already been answered.

  So I'm wanting to upgrade my dc7700 sff as much as possible. Up yet, I upgraded the GPU, RAM disk and windows, but I would like to upgrade the motherboard. From what people have told me, it is impossible to update the motherboard, but I would like some other opinions before I spend money I havnt really on a new PC.

  Here is a complete list of my specs (on the top of my head):

  160 GB Sata HARD drive

  3 GB RAM

  ATI Radeon X 1300 Pro GPU

  Intel (R) Core (TM) 2 CPU 6400 @ 2.13 GHz 2.13 GHz

  If you need more info please let me know and thanks for the help!

  Hello:

  If you want another opinion, then I agree with everyone who said that we can't do.

  Dc7800 SFF dc7900 SFF and the Elite SFF 8000-8300 have a redesigned cards mothers and where, so that they do not coincide in your model.

  And if you are referring to a classic motherboard you can buy from a manufacturer of motherboard (ASUS, Gigabyte, etc.), which can be done either.

• Update motherboard Vostro 260

  Hello

  I have motherboard Vostro 260

  Can I upgrade my processor i3-2120 3470 i5 or i5-3570?

  kamel20dz

  Hello

  I have motherboard Vostro 260

  Can I upgrade my processor i3-2120 3470 i5 or i5-3570?

  kamel20dz

  Already answered in your other messages here:

  http://en.community.Dell.com/support-forums/desktop/f/3514/p/19497687/20946462#20946462

  Bev.

• Update motherboard on Dimension E521

  I want to improve my current AMD Athlon CPU with an AMD Phenom, but my current motherboard is not compatible with it. What motherboards can I get compatible with AMD Phenom (socket AM2 +) and which fits inside the case? I guess that my current memory sticks is not compatible with the new processor. Thank you.

  Message edited by dong0liu on 06/16/2008 12:54
  
  

• Update motherboard, processor and graphics card.

  Hi, I have a few questions. If I decide to upgrade my motherboard, processor and Grahpics card, do I need to reinstall windows? And if so, my product key will work? I am a student and downloaded the free download of Windows 7 Pro for more information if this is useful.
  It is said that my product ID type is 5-retail, it is authorized and says I have a meter to rearm windows 3.
  The motherboard I am upgrade is also from the same company, Asus.

  You will need to reinstall and use the phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Updated motherboard, switching to home premium oem in professional detail.

  I have a copy retail Windows 7 Professional which has been activated on another computer I'm disassembly and no longer go to the for use.  Can I use this copy of windows in my new computer that is running windows 7 Home premium oem (just installed new motherboard and it continues to ask for activation) without any problems?  If possible I'll have to do a clean install or can I use any time upgrade?

  I'll give my younger brother my old computer should be able to have rights on the oem license, this hypothesis is correct?  What I read in the other questions and answers the oem cd key is locked to the computer, and since I'm going to give him the greater part of the original computer (less memory and hard drive) it should work right?

  The computer with the version of Windows OEM must keep the OEM version.

  You can install Windows 7 Pro on the new computer as a clean install (the key does not work as an anytime upgrade). Must be a 'Full' product or you need an earlier version of Windows to use an "Upgrade" version

  Windows 7 upgrade paths: http://technet.microsoft.com/en-us/library/dd772579%28v=ws.10%29.aspx

  J W Stuart: http://www.pagestart.com

• Vostro 410 - update motherboard

  Hi - I had a Vostro 410 for a few years. I want to put in addition to 4 GB of RAM, the motherboard supports (DG33A01) so I wanted to swap out the motherboard for something else. Motherboards are something that I don't know much, so I wanted to ask if anyone had done before, and if so, the other motherboard do you pick?

  Thank you

  Dell systems use cards mothers and case exclusive. That said, there is no other advice that works in your system. Your best buy a new rig or build your own.

  Also in order to use more than 4 GB of ram, you must run a 64-bit version of windows.

• Update motherboard ThinkCenter M58E to: 64-bit and add 4 GB to the Board of Directors, keeping OEM 4 GB on ERS

  I need suggestions for a replacement motherboard. OEM is 32 bits, w / 4 GB of ram.

  Also, where is the best place to buy?

  Jim Donahue

  Do you mean a motherboard replacement M58?   A motherboard (MB) usually does not come with a Windows license, so change from 32 to 64 bits would be independent of the MB.

  If you could inform us about what you have and your goal, we can help you more.

• Update BIOS question - 5100 series

  I have a satellite 5110 (Australian model)
  What changes have been made with the latest bios flash Update v1.2?
  What is the v1.5 "EC/KBC? What is doing?
  I did both, but noticed no difference... maybe it was to recognize 1gig instead of 512 MB?

  Thank you, andrew.

  Hello

  Unfortunately there are no official documents on changes in the BIOS.
  As far as I know a few units need the EC/KBC (keyboard controller) day after the BIOS update. NOTE: In the case where the machine power trouble during the update motherboard will be a pity!
  Moreover, I don t think that after updating the BIOS, the unit will be able to recognize a memory of 1 GB.

  Good bye

• How to install Win7 64-bit Service Pack 1, updates and applications correctly

  What I want to do:

  I have 2 x legitimate copies of Win 7 64 bit SP1 on DVD.  I want to install on 2 separate PC with new facilities.

  The problem that I've encountered so far:

  I formatted the hard disk in the #1 PC, installed Win 7 SP1, install the drivers that came with the motherboard (with the series of reboots), active Windows and tried to run Windows updates before installing additional software.  Windows Update installed a 'Windows Client software update' update and then began the verification of updates.  However, it remains to check for updates for always)<17 hours). ="" windows="" update="" shouldn't="" have="" choked="" at="" this="" early="" stage,="" so="" something="" has="" changed="" on="" the="" microsoft="" side="" of="" things. ="" i="" know="" that="" the="" hardware="" is="" fine="" because="" i="" had="" win="" 7="" on="" it="" prior="" and="" i="" ran="" diagnostics="" on="" it="" to="" be="" sure. ="" a="" full="" a/v="" scan="" was="" performed="" to="" ensure="" everything="" is="" clean. ="" i="" haven't="" started="" pc="" #2="">

  My question:

  What is the proper sequence of steps to get Windows 7 SP1, updates, MS Office, 3rd the party games (ex: WoW, SC-2, Diablo 3, steam), McAfee A / V, etc., installed clean so that my PC run smooth?  I know that some software requires that a specific minimum version of .NET installed, so the installation sequence is important.  I will be formatting the drive on PC #1 once again before a new attempt.

  PC Hardware #1 Info:

  -Card mother Asus Z87 - Pro (embedded ethernet and wireless adapters)

  -Processor i3-4130

  -16 GB OF RAM

  -EVGA GTX 650 graphics card

  -Drive hard Seagate SATA 6 to 2

  -LiteON SATA DVD burner

  -Keyboard Logitech K120 and MS Mouse (the two USB)

  PC Hardware #2 info:

  -Asus MAXIMUS VI FORMULA Motherboard (on-board ethernet and wireless adapters)

  -Core i5 - 4670 K CPU

  -16 GB OF RAM

  -EVGA GTX 660 graphics card

  -Drive hard Seagate SATA 6 to 2

  -LiteON SATA DVD burner

  -Keyboard Logitech K120 and MS Mouse (the two USB)

  I have the original driver/utility DVD that come with motherboards and I have the updated drivers downloaded from the Asus site.  Each drive has 2 partitions.  Partition-1, drive C is for Win 7 OS, and it is marked as active/bootable.  Partition-2, drive D is where the updated motherboard drivers.  Both partitions are formatted with NTFS file systems.

  Thanks in advance.

  We have progress!  Found 112 updates and I started the download.  Thanks to André and J.W. Stuart.  It took like 5 to 7 hours to produce a list of the updates after you install the update rollup.  Either way, I found the following article, shortly before I met the answers here:

  http://www.MakeUseOf.com/tag/convenience-rollup-halfs-Windows-7-SP1-installation-time/

  After reading the article and the responses, I thought the rollup was the right path to take and ran with it.  I installed the battery update before the update rollup.  No errors were encountered during the installation of these two elements.

  Finally...

  1 - Microsoft needs to get their Tech chat based personal support off this dry and outdated script they use.  They need to know about the method of rollup.  However, the tech. I met in a chat session before coming here, was quite distraught and kept asking to do a remote desktop session, even if I refused 3 times.  A tech polished, very persistent but distraught.  The chat session was not my home PC on a PC at work.

  can 2 - I get a good Service Pack 2 for Windows 7, please?  Make available via a file down to local facilities, do so in Windows Update and download for Win 7 64 Service Pack 2 DVD image.

  3. he does really not take 5 + hours to produce a list of the necessary updates.  The Windows Update client should really be changed to show some real status beyond this silly green bar.  I think it is that a Client of Windows Update request is sent to Microsoft, and this request is pending.  The queue is probably priority based with Windows 10 get a higher priority on Windows 7 (Microsoft bias?).  Even if my theory of priority queue is correct, turn around time on the application is properly synchronized in a world of Gigabit Ethernet, 5 G WI - FI and cheap access broadband I have-net.

  4 10/Windows... too many questions/gripes to speak, but I leave it on the table.  Win 8/10 looks blocky with less of its border, for windows/AC tablets.  This isn't a modern user interface.  The user interface is dumbed-down and is reminiscent of Windows 3.11, or as it is a cobbled together collection of JavaScript in the browser user interface.  The menu start alone is a huge waste of time resources CPU and memory.  Windows 7 semi-translucides borders please.  No cost and no hassle.

• MBP 17 inch 2.5 GHz end 2011 video-questions

  Good day to you all.

  Confusion serious, for me anyway.

  There are and have had problems with the AMD Radeon HD 6750 M and HD 6770 M graphics cards. Suddenly distorted video, random reboots, odd shaped and colored stalls artefarcts etc., in the start of the end.

  I happen to have one of those affected Mbps, a late 2011 model, 17-inch core i7, 2.5 GHz, the model identifier MacBookPro8, 3, model number A1297, EMC 2564. It's still fully usable, nothing wrong, but who could, not necessarily expected or, will come to an abrupt end as many owners, some of my friends have known and display these columns.

  The site of Apple "MacBook Pro repair Extension program for video Issues" (https://www.apple.com/support/macbookpro-videoissues/), I learned:

  products concerned:

  • models of MacBook Pro 15 inch and 17 inch made in 2011.

  • MacBook Pro 15 inch with retina models made from mid-2012-beginning 2013

  I walked to my S/N MBP, it turns out that my MBP is no longer covered.

  MacTracker 7.5.5 I learn that the MBP A1297 introduced in October 2011 and abandoned by June 2012.

  Repair of Apple (for models non-retine) program talks about the models made in 2011.

  My question: how about the models made between January and June, 2012?

  Something has been changed or modified in order to get rid of the problems of graphics cards? Something like, say, update motherboard, graphics, a radiator, redesigned, more powerful fans?

  For me, it's quite confusing, via this link www.chipmunk.nl/klantenservice/applemodel.html, I discovered that my MBP 17 inch out of the Assembly line the 5th week of 2012, factory C0, Quanta Computer China. I'm not the first buyer, I don't know who it was, or when it was first purchased.

  What I worry, in other words is my MBP 'off-the-hook '?

  Could someone shine some light in this?

  With sincere greetings from continental Europe

  Khalid Hoogenbos

  The original questions developed in some 2010 models with integrated graphics discrete AND who uses graphics switching. These have proved to finally have a DEFAULT MONSTER - a defect in the graphics chip itself. The problem was there from the moment when they were built, but itself has failed, until these Macs have been highlighted or installed the latest versions of Mac OS X.

  In order to determine what was causing the growing pile of bad mothers replaced the field, Apple has developed the video switching Test (VST).

  Trying to continue studying these issues, other issues appeared in some 2011 models. These were not the same hidden defects in the chips, but Apple has never revealed exactly what they were.

  Some users suggested that they might have been problems with the excessive heat generated or process, such as the exact used solder type, or the amount the technique with which it has been applied, or all of this and more. You must be certain that all relevant updates have been applied, (if any) that these may affect cooling fan control.

  When you see a reminder that is limited to a certain period of time, you can generally be assured that if your Mac does not fall within the time limits stipulated it is simply NOT submitted the issues addressed in the callback.

  To be eligible for the reminder, your Mac must strictly comply with ALL requirements. It is a very small subset of users whose MacBook Pro of the time period appropriate have additional problems and will not start. They are NOT eligible for the free motherboard replacement, because they can not run (and therefore may not) the VST test.

• DL380 G6: DL380 G6 using X 5690

  Hello friends.
  I have a DL 380 6 which I want to install Cpu X 5690 2 p. then now, I can't do that, when I install and startup may not start.
  I just received an update from the HP website it will work by update motherboards, also I did the update but still can not work.
  I saw the reference from this link.
  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=3884313&docid=emr_na-c03898078&docLocale...

  Please help with your suggestion with kindness.

  Thank you.

  Hello:

  You can also ask your question on the HP Enterprise Business Community - DL servers support forum...

  http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VZaXJk3bK9I