Update of BIOS Satellite L30 - 10s - error code 1072
Hello
I am trying to update my BIOS using the download from the Toshiba Page but just open the program causing the error 1072... ?
"Unable to load driver.
C:\Users\...\temp\WZSE2. TMP\PHLASHNT. SYS.
Please check your accounts... (I am administrator)
The specified service has been marked for deletion
Error 1072 "code
Any help would be great
Thank you very much
Hello
I had the same question that I've updated couldn t of the BIOS. The solution to my problem was very easy: you need to extract all files from zip archive, and then start the update. So extract all files to a new directory and try to start the update.
I hope that helps! ;)
Tags: Toshiba
Similar Questions
-
I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.
The primary partition has the following folders (including hidden & system)
The recovery partition has the following (including the language files more)
Someone at - it ideas why my laptop does not work?
Thank you
Greg
Hello
You press F11 on startup with a HP Compaq to start the recovery process.
For problems with the recovery process, you will need to contact HP.
BIOS problems:
There are messages for the HP Forums for posters with similar errors:
All the answers it point to a drive about to fail
See you soon.
-
Re: How can I improve the performance of Vista on a Satellite L30-10s?
I have worked in Vista on a Satellite L30 - 10s for a while and get very poor performance. It takes several seconds just to respond to the movement of the scroll bar. I put Control Plan-> system and Maintenance... System Properties-> visuals to "Adjust for best performance", but it gave no noticeable improvement. The RAM is 446 MB - upgraded this would improve performance? If so, what would the good do & spec to buy?
> It RAM is 446 MB - upgraded this would improve performance?
Of course, it is not enough to run vista with good performance. 1 GB minimum Ram required to run Vista, better than 2 GB ram
To the l30 product specifications:
standard: 256 MB
maximum scalability: 2 048 MB
technology: DDR2 RAM (533 MHz)You can be upgraded up to 2 GB DDR 2
Post edited by: Jeka -?
-
HP Pavilion m6-1045dx: update the bios y dios UN error
Update the bios y dio UN error desde the pagina driver busque bios desde php the instale y y is reinicio pc sola y is quedo pantalla negra pero el equipo lights are una portatil HP Pavilion m6-1045dx
Ayuda than devo hacer para las dress bios?
@David- 100
Thank you for visiting our English HP Support Forum. We are only able to respond to messages written in English. To ensure a fast response, it would be desirable to ask your question in English. The following links are here to help you if you want to post the following language Forum.
German: HP Kundenforum
Spanish: Foro of HP users
French: Forum users
Portuguese: Forum back HP users
Chinese: 惠普个人客户支持论坛
Korean: HP 지식커뮤니티Thanks for your understanding
-
In particular windows security updates for example updating security for windows vista (KB2378111) error code: 800719E4. With a lot more updates, they continue to fail, but only a couple succeed. When starting my computer in general goes to screen installation of updates. He finished going through step 1 and 2, but never seems to complete step 3 and remains on full where for at least 5 minutes. Then shows that updates were not properly before. Restoration of the changes. This continues to happen frequently now, and after having tried to restart my computer or install a little at a time still does not solve the problem. Also, I tried to use the troubleshooting solutions but did not have much. Don't know what else to do?
My laptop runs Windows Vista Home premium: service pack 1: 32-bit operating system type.
0X800719E4 ERROR_LOG_FULL
The log space is exhausted.Transaction for Windows Update logs may be in an inconsistent state.
You can delete them by clicking the ORB start.
In the search for cmd field type
Right click on cmd.exe and select 'run as administrator '. Accept the UAC prompt.At the prompt, type in the below exactly as written, including spaces, pushing enter after each command
CD /d %SystemRoot%\System32\SMI\Store\Machine
attrib s h *.
del *.blf
del * .regtrans-ms
outputRestart the computer now and see if it can be updated.
MowGreen
Expert in Windows IT Pro - consumer safety* - 343-* FDNY
NEVER FORGOTTEN -
80072efe I have Vista Home Premium and I can't download updates it keeps giving me this error code help!
ERROR_INTERNET_CONNECTION_ABORTED 80072EFE
Service Pack 2 is installed? If it has been...
How long this update problem occurred?
What is the suite of security/antivirus installed and is a 3rd party firewall used?
The current AV subscription and it detects malicious software the last time that the system has been analyzed?You can reset the Windows Update components by running the Fixit on this page. But, if there is malware present, she will continue to reset the connection to the update servers:How to reset the Windows Update components
Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7Once the Fixit has been downloaded and the system is started in the pure State, check that the native Vista firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.
MowGreen Services update - consumer safety
-
I tried to install since 11/12/09 important update KB976098 and continue to get error code 8E5E03FB unknown error. I tried to find the error code, but can't find it. How can I download and install this update?
Quote your full version of Windows (for example, WinXP SP3;) Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.
Short story: If you do NOT live in one of the zones listed in http://support.microsoft.com/kb/976098, you really need not to install this security update not any way so you can hide it just ("don't show me this update"). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
MSE uninstalled by an automatic update of Windows XP SP3. Error code 0 x 80070642.
MSE uninstalled by an automatic update of Windows XP SP3. Error code 0 x 80070642.
It will not reinstall. Tried to restore the operating system to an earlier date.
Have tried to repair the original operating system with the OS installation CD.
Spin without MSE and tasked a free anti-virus software in the meantime.For problems with Microsoft Security Essentials, you can submit to submit a support case online.
Note: You may need to remove avast completely before attempting to reinstall MSE.
-
I can't install the updates of Windows on Vista. Error code is that 80246008-Windows Update encountered an unknown error. Help had two suggestions being to check to see if the Background Intelligent Transfer Service is running, and I don't have the service installed, it is the problem. What should I do?
Hi Nita,
Thanks for posting your question in the Microsoft Community forums.
The description of the problem, I see that you are unable to install Windows Update and receive the error code 80246008. I also see that the PIECES is not in services.
I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
The 80246008 error code may occur if the (BITS) Background Intelligent Transfer Service is not started or is configured incorrectly.
I suggest you try the procedure described in the article and see if it helps.
Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.
http://support.Microsoft.com/kb/956706Let us know the status of the issue after you perform the troubleshooting steps. If you need to get assistance or information about this problem with Windows Update, I'll be happy to help you. We, at tender Microsoft to excellence.
-
I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE
- I CAN'T INSTALL WINDOWS UPDATE (IMPORTANT) KB2761494 AND GET 80073AA2 ERROR CODE. THIS HAPPENED SEVERAL WEEKS
- THANK YOU, MARK SZYMANSKI
Hi Mark,
Thanks for posting your question in the Microsoft Community.
I understand that you can not install Windows update to KB2761494 with error code 80073AA2. Correct me if I'm wrong.
I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
1. is the specific question for the individual or all of the updates?
2. did you of recent changes made to your computer before the show?
Please follow the methods and mark the question below:
Method 1:
You need perform a clean boot to prevent any third party conflicting application from interfering with your computer and try to install the updates.
To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.
How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
http://support.Microsoft.com/kb/929135Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.
Method 2:
Manually install the update from the link below.
Framework for drivers Windows version 1.11 cumulative update for Windows Vista and Windows Server 2008:
http://support.Microsoft.com/kb/2761494
Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
Your response is very important for us to ensure a proper resolution. Please get back to us to help you accordingly.
-
try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error. How can I fix it?
Hello
1. what patch did you try?
2. update you are trying to install?Method 1:
You can follow the steps in troubleshooting this article and check:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updatesMethod 2:
You can also try the steps from the link:
Windows Update, error 80240016
Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
http://support.Microsoft.com/kb/957307Method 3:
You can also perform a clean boot, and then try to install and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article. -
When the updates of windows I get and error code for 643. How can I fix it?
When the updates of windows I get and error code for 643. How can I fix it?
When the updates of windows I get and error code for 643. How can I fix it?
Here is an answer which is marked as an answer to the error code 643.
I also participated in that thread, and I gave my suggestions.
-
Several windows updates are not installed and the error code given is 66A
Original title: updates
Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?
Hello
1 did you change on your computer before this problem?
Follow the suggestions and check if it works.
Method 1
You can reset Windows Update components and see if it works fine.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 2You can download and run the system update readiness tool.
Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
http://support.Microsoft.com/kb/947821See also:
Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update
-
Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641.
Try to install 4 ' important'updates on Windows Vista and get error codes: 80070641, who has had a lot of answers posted but none does not seem to work and I tried to install this upgrade for the last 6 months! (I did one where you made sure something is running in the Control Panel, but it works just not - I HATE Vista!)
Now just got a new error code: 6 to 8.
The updates, I can't update (!) are:
- SQL Server 2005 Express Edition Service Pack 4
- Update of security for MSOffice 2007 System
- Update for MS 2007 Office system
- Update for MSOffice Outlook 2007 Junk email filter
Unfortunately I'm not technically proficient at all and do not understand the jargon I've read on this site so if anyone has an answer, please could you write it as if you were talking to your grandma who only discovered what a mouse! ;-)
Thanks in advance
Sharon
original title: error codes: 6-8 and 80070641
Hello
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or please repost your question in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
When I try to download the update of windows I get an error code every time: 802440F.
When I try to download the update of windows I get an error code every time: 802440F. Can you please help me solve this problem?
@ Evanston only!...
You see the effects of a hijackware infection! If you had used the computer longer, I might recommend trying to detect & remove infections. But it would probably take a week or two and I'm sure you have better to do with your time right now so I would recommend the following (which shouldn't take any more than two hours of uninterrupted time).
See...
Cleaning a compromised system
http://TechNet.Microsoft.com/en-us/library/cc700813.aspxPersonal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
HOW to do a clean install of Win7: see "using the custom installation and formatting the hard drive option" (or "reinstall it Windows 7") http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7 article
NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").
After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:
4 steps to help protect your new computer before going online
http://www.Microsoft.com/security/pypc.aspxVERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool again Norton before installing updates AND BEFORE installing your new application antivirus (for example, Avast5 or Microsoft Security Essentials, free).
Tip: Do not install Spybot again; It's really overkill in Win7 my humble OPINION, especially if you are installing Microsoft Security Essentials.
See also:
Risks & benefits of P2P file sharing
http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
http://www.us-cert.gov/CAs/tips/ST05-007.htmlMeasures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspxIf you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads
If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.
Wish I had better news for you. Good luck & achieve before Thanksgiving 2010!
Maybe you are looking for
-
Moving old iMac to newer model
I have a 2007 24 "iMac running 10.5.8 at home and just bought an iMac 27" 5K new. I used Time Machine to back up my old Mac via a USB 2.0 drive, but I'm not sure about migration anything over the old to the new. I would like to have all my files avai
-
Key Code of advertising: 80170103
Fallout3 - cannot install Mothership Zeta after the success of the download. Key code will appear instead launching code.What does the code? That's because win7 or?Win7 is up-to-date.The drivers are up to date.No problem with the payment.Once again:
-
Windows Search 4.0 for Windows XP (KB940157) - broken link
It is a broken link, it seems I want to download the patch http://download.Microsoft.com/download/a/5/6/a56b2342-8ebe-46FF-85f7-d9a9ca887bfa/windowssearch-KB940157-XP-x86-enu.exe Indicates the following. This is a fix for the instant search in outloo
-
I can't update anything on the update of widows
Whenever I try to install an update, it always says that there is an error. And I need most of the updates because they help my security and protection. Please help me! I tried to scan my calculation for any virus, I already removed a fake anti-virus
-
Transfer pictures from SD for phone
Hi I have a 2 GB sd and im buying a 64Gb class 10 Samsung evo + but I don't know how to transfer pictures that are on the sd card to the phone! Help.