Update of firmware and drivers controller PowerEdge 2900

Similar Questions

• USRP RuntimeError: Please update the firmware and FPGA images for your device.

  Hello

  I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.

  2009 LabVIEW and NOR-USRP 1.1

  When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627

  "niUSRP Devices.vi finda length or configuration error has occurred."
  Code: 1440
  Details: RuntimeError:
  Please update the firmware and FPGA images for your device.
  See application for USRP2/N-Series notes for instructions.
  Compatibility of the Protocol expected number [7-11], but received 12:
  The version of the firmware is not compatible with the host code generation. »

  I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.

  Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.

  Can someone help me with this problem please?

  With respect,

  -Sigurd has.

  Hello Sigurd,

  The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.

  You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.

  This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP

• Need to update the BIOS and drivers for Satellite Satellite Pro A10

  I have a Toshiba Satellite SPA10 model num E = 09VYL-PSA15-EN. I searched everywhere but can not find update BIOS and drivers for this model of laptop.

  Please provide me with a link.

  Hello Debbie

  There is no such thing as SPA10 satellite. You either have Satellite A10 or P10. Please check on the label at the bottom of your laptop. Correctly identify your laptop model and you will find everything you need on Toshiba download page.

• Question about updating the BIOS and drivers

  Hello

  First time user. How will I know if I need to update bios and drivers? I don't want to go crashing my system, just because Toshiba say these items are available for my laptop! They were probably in the updates of windows?

  Help, please.

  Hi Andy

  Welcome to our small community
  First a little advice you should always write the name of your laptop.

  OK now, to you in general I have a question would not recommend to update anything if you laptop and operating system is stable and you don t have problems.
  Of course the update of the driver is not risky, but I would only run updates some compatibility problems with 3rd party software or hardware appears.

  The update of the BIOS is risky. Wrong or bad BIOS update procedure could damage the ROM module on the map. So be careful.

• How can I update my BIOS and DRIVERS

  I have problems with my graphics card and after talking to support AMD, I find that I have to update my BIOS. the brand is award Software International Version FB.   I passed the link and found a link BIOS AGENT PLUS, is it safe to use and it's FREE?   I let it scan and he told me that I should update the BIOS and several DRIVERS.

  If necessary I'll send info of SPECCY.  All of the above parameters are 6 years of age.

  Thank you!

  CarrmasDad2

  'Smart TV' is a term used to describe TVs that incorporate Internet marketing functions.  You can connect your 'smart TV' to your network home directly, without the need for an intermediate device.

  If you have already a device such as a Blu - Ray, Roku player, game console, etc., that can connect to the Internet and then to your TV (to provide access to services such as Netflix and other streaming media sites), then you don't need a smart TV - although from what I can tell, 'resourcefulness' will appear on the models more not just high-end models.

• Update of firmware and driver PERC H700

  I hope an easy answer, but I have a firmware and driver update for my PERC H700 and ask yourself which must be installed first? Is it still important?

  Hello Blake

  You probably won't have issues updated in any order, but recommended when performing updates is to start furthest from the system BIOS and work your way back. This means that you would update the driver first.

  Behind put reason in this way is that if you update something like the BIOS OF THE system firstly something that takes over after the system BIOS is incompatible older revision you backflash THE system BIOS in order to enter the other device/OS to be able to update it. If you update in the correct order you should still be able to perform updates obsolete unit to bring it to a compatible revision.

  Thank you

• Printer HP 8610: continues to move my printer HP 8610 in 10 Windows offline - update of firmware and latest drivers - wh

  My HP 8610 printer keeps going offline

  Im running Windows 10 64 Philippe, all the latest patches as of today. Never had a problem with the fabulous Windows 10 PC.

  I rebooted all the printer software HP PC today, so that check if the printer has the latest firmware, yes it is

  I restarted the PC

  I restarted the printer

  PING can see printer, its on a wired network

  I disabled IPv6

  What now!

  It's the most expensive peripheral interms of my time, that I've never owned and highly recommned never buy another HP printer... its unaffordable

  Help

  Hi @geoffrlz

  I'm glad to hear that you are able to accept the USB connection as a solution and everything works fine now.

  Good day!

• QLogic NIC firmware and drivers on 11G servers

  Hi all

  Can someone explain why the new QLogic NIC firmware (formerly Broadcom) and the pilot are not shown on the pages of download for 11 G- servers?

  We have a bunch of R710 servers (Windows Server 2012 R2) with NIC BCM5709C NetXtreme II which, according to the release notes are compatible with these new updates.

  If you go to the download page for R710, these files are not, (only older files of Broadcom).

  Instead, I run the last SUU (15.04.200.109) on a R710, the pilot and the new fw QLogic are listed as extensible.

  A strange thing here is that the version of fw-package in the SUU is 7.12.15.
  (I can't remember having seen the version of the Driver and download pages).

  "QLogic BCM57xx and BCM57xxx Network Device Firmware 7.12" version which is downloadable for example R720 is 7.12.17.

  Verifying compliance on R710 to OME with the latest version of the catalog, no new QLogic driver or firmware appears.

  I have applied these new QLogic on a R710 updates in our lab and installed both without problem and seem to work well.

  I am bit confused now and would like to know if Dell supports the driver and QLogic fw on R710 with NIC BCM5709C NetXtreme II

  Larnil,

  Thank you for bringing this to my attention. According to me, that it was simply an oversight due to the change of name, following the acquisition of Broadcom by Qlogic. We will look on getting the page corrected to reflect the most recent update.

  Thank you once again.

• Dell XPS 15 SSD NVMe slow after updating the firmware July 2016 and papillonné CPU (Core i7)

  Edit: 9/2: title change intended to reflect issues of CPU throttling and discussion (second half of the thread)

  I noticed a huge performance drag after updating the firmware and drivers of my XPS 15 9550. The update took place August 4, 2016.

  Performance of my usual applications (Chrome, development tools and IDE, etc.) is dramatically lower. In general, I would say that things take about 3 times as long to arrive. I checked the CPU (normal), but also memory consumption (as normal) to discover that the problem is with the SSD drive.

  On this laptop: 500 GB NVMe thnsn5512gpu7 NV (toshiba). Attached are the results of a benchmark with AS SSD. All write speeds are appalling, to say the least... that explains a lot, but I have no idea how to solve this problem, and whether or not it really relates to the latest firmware + update drivers provided by Dell.

  (Note: I checked the BIOS, it seems that the SSD is currently configured in RAID mode.) Never touched this option before.)

  Any idea? Other affected users in a similar way. Thanks in advance.

  

  I managed to get the performance back by going to the properties of the disc and turn off windows write cache flushing heat. The two boxes should be checked. Write speed then went to about 1400 MB/s.

• EliteBook 725 G3: Failed to update the Firmware USB controller of Type C

  My laptop is one of the first to come out of the Assembly line and came with firmware 1.02.

  1.08 BIOS that is out there, so I tried to update Windows 7.  It took time, but it's over and the tool said to restart.  That's all he said I remember.

  Upon restart, it started giving beep codes.  I don't remember who it was, but it was something like 1 long 2 short or long 2 2 - short.  He kept with him for awhile and I got sick of him, so I pushed on and held the power button for the kill and then restarted.

  This time, he got in the BIOS, who says she has been updated controller firmware USB Type C of v12 v13.  This FAILURE and gave me the option "restart and try again."  I took that, but he was never retried.

  I felt comfortable with that, so I flashed the BIOS 1.08 again, this time in the BIOS using a Flash DRIVE (\Hewlett-Packard\BIOS\New\N73_0108.bin).  He went through much faster than on Windows, and in the end, he actually warned me that the machine may beep for awhile after restarting.  Uh, thanks for the warning, now it's too late.  Why doesn't Windows Update program gave me the same caveat useful?

  In any case, the SystemRoot machine, but he did nothing to try to update the firmware of the controller USB Type-C.  I'm guessing that he defined an indicator saying somewhere that we are already at 1.08, so there is nothing new to do.

  When the BIOS Setup is emptied using BiosConfigUtility.exe, it shows the USB Type-C controller firmware to be even 00.12.

  So, how to update at 00.13?

  Posted March 31, 2016 1.11 BIOS update corrects this problem.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7815285&swItemId=ob_163435_1&swEnvOid=4192#TAB4

• HP P1102 turns off after 4 hours since the last update of firmware - stop it turn off?

  I have updated the firmware and my printer drivers for the last realease (17/10/2012) on my P1102 printer. The printer now turns off completely after 4 hours. I changed the setting in the driver to "never turn off" but it makes no difference. It's a big problem that I use the PC connected to the printer via remote access and so I can print is no longer when I want to. How I either restore the firmware or stop the printer turn off please? Since the firmware update, I noticed also that when the printer goes to sleep the green light will blink each opten both before the firware update lights exploded when the printer has gone to bed. Can someone help please...

  Thanks in advance

  Hoddy

  Hi Hoddy,

  Follow the steps outlined in the document below. Let me know if this helps you?

  Auto shut-off delay time is too short

• Cannot start the update to firmware OJ6500_E710a-f_R1206A

  Given the availability of a new version for my printer, the 6500 a - E710a 1206 FW, which is always on the 1110AR version.

  • Is running on the host Windows 7 64-bit SP1, the printer on a wired network with static IP 192.168.1.200
    (also tried on a laptop VISTA business SP2 32-bit)
  • Unplugged the printer and made a cold start.
  • The Windows Firewall and virusscanner AVG are deactivated.
  • I started flashing utility owned by the firmwareupdate executable.
  • The printer is the static IP address, but the line is grayed out.
  • The update button is gray. The printer cannot be selected with the checkbox.
  • 

  What can be the problem here?

  Thanks for any help!

  Jack

  Hi Jack,

  Try to connect the printer to your computer via a direct USB connection, and then try to update the firmware and the check for the difference.

  If the problem persists, try the steps in the post below, the same should apply for the 6500 has as following:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-drivers/unable-to-update-firmware-on-OfficeJet-6100/m-p/4142068#M59943

  Hope that helps,

  Shlomi

• Dell PowerEdge 2900 Gen 3 storage issue

  Server is updated the firmware and the BIOS has to SAS6 6i controller. Operating system is Ubuntu Server LTS 14.04.

  Drive is a 4 to Seagate...

  Appears in gdisk and present as only 2 TB. If I pop the drawer and put it in a server Win2014R2 with UIEF/EFI BIOS, it says 4 TB.

  Is this a problem with the system BIOS or the firmware of the controller?

  Hello

  MAFoElffen

  Is this a problem with the system BIOS or the firmware of the controller?

  There is no problem. Maximum drive size supported on the 6 SAS is 2 TB.

  Thank you

• Update the firmware, Toshiba TL 838

  I have problems with my TL838, I heard you can update the Firmware and this has solved some of the problems. Where can I find these updates?

  > I have problems with my TL838.

  What problems do you exactly with the LED Toshiba TL838 TV?

• Download software and drivers

  Just bought HP Probook 4530 s. You want to ensure that I have the latest updates of software and drivers. When I go on the product specific download page, a dozen appeared in a number of different categories. Do all these need to be downloaded?

  Also, some so I fell on a page which is registered in a different way and specific product downloads. Each download includes a brief description and was also marked as "critical" etc. "recommended". I downloaded a 'critical' download, but after downloading and a reboot of the pc, I lost the page and don't remember how to get it back. Is anyone familiar with this page?

  Had a HP for 8 years before this Probook. I'm already cursing myself for reduced another HP. still confused, never simple, never easy to use. Must be another way to know if of my Probook software and drivers are up to date. Something simple for Dummies like me. May be too much trouble to HP.

  Hello

  I think you should look for the HP software on your computer and it downloads only missing components.

  Kind regards