Update of firmware for DVD - RAM Mat * a UJ - 841 S in Satellite M40-265

Hi all

I had a problem:

My M40-265 Satellite integrated mast * a DVD - RAM UJ - 841S by car.
In fact, it should be able to burn DVD - R 8 x.
But that it burns only 2 x atm.

I already changed the manufacturer disk 3 times.
And the discs can be burned x 16 to 2 other PC...

It's really annoying because I spend a lot of time, 1 single dvd burning...
I need a Firmware update.
But the only updated, I find, is actually for VAIO Laptops... .it does not work.
Can you help me please?

Thank you!

Best regards
Henning

Hello

the problem is, the carpet * a readers are a bit complicated regarding the FW update and burning speeds.

Have you tried Verbatim and TDK? Carpet * a readers want to be fed with very expensive disks that has nothing to do with toshiba, rather (and sadly) something with the manufacturer of this drive. :(

You can do the following:

Try initially to these sites:

Driver DVD-RAM for your car
http://www.bhacorp.com/download/utilities/DVDRAM.html

Firmwareupdate for your car
http://Forum.RPC1.org/dl_firmware.php?download_id=2244

But I recommend using BEST discs for burning. So I solved my problems of speed with a carpet * player.

Welcome them

Tags: Toshiba

Similar Questions

  • Firmware for DVD - RAM Mat * a UJ - 850 s in Satellite L40 - 14F

    Hello.

    I would like to ask who is available update of firmware for Mat * a DVD - RAM UJ-850 s located in the laptop Toshiba Satellite L40 - 14F. I can't find it on Panasonic/Matt * a web site.

    Thanks for the replies.

    Hi Dusan

    Can you please tell us what DVD are you writing about? Movie original DVD or your own creation? what application should I use to watch DVDs?

    Try VLC media player.

  • M50-192: DVD - Ram Mat * a UJ - 841 S burn only 2 x

    Hi guys

    This perticular drive reconises only Ritek 8 x G05 media as 2 x any idea why it will burn only at 2 x using NERO and Sonic Record now.

    Been intouch with the place where the laptop was purchased from and they explained that it could be a problem of firmware with this perticular Media.

    So so I need some food to go back about what kind of 8 x speed support this writer will use.

    If it is a firmware issue, it is a problem for end users who wish to use Ritek media.

    Hello

    Well, I use the TDK and I m very happy. You should try using different media.

    Also, I read that this new driver could resolve the burning question.
    Try to install this driver:
    http://Panasonic.co.jp/PSEC/Data/mkehp/docs/Driver/XPDrv5021NEN.exe

    Maybe it helps.

    Good bye

  • Tecra A8 - Mat * a DVD - RAM UJ-problem reading 841S

    I have Tecra A8-143 (PTA843E) Lap, WXP Pro SP2 original. Later, I installed SP3 and the problem with the topic. Finally the time Mat * one impossible reed VERBATIM DVD - R (4, 7 GB) discs, even those who got burned in 'home' with Nero (or record now, I'm not sure), although reed he earlier without problems.

    In addition, the reader can Reed DVD-R and Memorex CD - R Verbatim discs. In the meantime I have installed and uninstalled several programs and we hope that the point is in the configuration, but I afraid that SP3 is "fatal error" and I cannot flee from resettlement.

    It is strange to me that this driver for DVD - RAM is Microsoft. can I install Mat * original drivers? My experience is humble and I'll be very grateful for help.

    Thanks in advance.

    > It is strange to me that this driver for DVD - RAM is Microsoft. can I install Mat * original drivers?
    As noted in the previous announcement the CD/DVD drive is still controlled by Microsoft Windows driver!
    There is no other pilot who could control the STRANGE

    Back to your question;
    There are two reasons why your CD/DVD drive does not read the disc;
    First the disc would be insufficiently supported or the s drive laser lens cannot handle the disc to the stress matrix laser lens could also not be clean
    You could clean the lens with a cotton tip and alcohol
    In my case it helped

  • Equium L10 needs a driver for DVD - RAM drive

    It's rather embarrassing, but these days, I found that somehow, the driver for my DVD RAM (Mat * un UJ830s) is somehow damaged or missing.

    I searched high and low on the net to find the right driver to reinstall, but I can't find a single thing.

    Do not can someone help?

    Do you mean simply common driver for the carpet * a UJ830s?
    Windows generally use the common Microsoft OS driver and usually you will not find a Toshiba driver for this device.
    OK, on the page you will find a DVD - RAM but it s only for reading and writing to DVD-RAM media.

    Attention if you use DVD-RAM disks in the drive of DVD MULTI data cannot be written to a DVD-RAM disk, while the function to write data on discs CD-R/RW standard Windows XP is enabled.
    A message is displayed when this function has been enabled, so when using a DVD-RAM disk, take into account the teaching given in this message by unchecking "enable CD writing on this drive.

  • Error message on the download of update of firmware for airport

    Get an error message when you try to download the update of firmware for the airport. Have disabled the Wi - Fi for all devices; powering down of the airport; MacBook connected to the router via a cable; access to Internet but the download update still gives an error. Any ideas on haw to get the update, or what is the problem? Thank you.

    The error message say, exactly? What version of Mac OS X you are running on this machine?

    For updates of the firmware to work, you must be connected to your device from the airport and connected to the Internet at the same time. If you have a situation where you have to disconnect from the Internet to connect to your airport device, it does not work, at least not for the first time, you have to download a firmware version for the same model of AirPort base station.

  • Power failure during the update of firmware for Color LaserJet 2600n

    Just in the middle of the update the firmware for my Color LaserJet 2600n, the power is out. Now I can't get anything to happen on the printer. The screen, or the power lights and the error light, but it does not work when the power is put on. I think that he wiped the previous firmware and either had not started or has been along the way in writing the new info. Is it possible that I can cancel it and reload the original firmware? It hangs on my MacBook Pro running OS 10.6.8. The only thing that the instructions seriously cautioned against a interrupt the installation. Needless to say, this is exactly what happened when the power is out. Any help would be greatly appreciated.

    Randy

    Able to understand me. Has proved to be quite simple. Powered off the printer and turn it back on and represented the firmware upgrade program. The printer didn't restart automatically, so I had to power off and wait 5 seconds before feeding this back. Once he recalibrated itself (which takes several minutes), I was in business.

  • Update of firmware for HP Officejet Pro 7700 problem

    I need help with this problem, thank you for your time.

    Operating system is windows 7 ultimate

    Printer network cable (RJ45) and is recognized by the computer and is able to ping.

    I had a problem with the printer freeze and reset to make it work. Now, I want to update the firmware from R2004NXNeN0 to OfficejetProL7700_R2011PxN when I run the program it is unable to find my printer, I have the firewall turned off and other HP printers on the 'Wireless' network they don't show either. But I wasn't expecting to show.  What I am doing wrong.

    John

    Hi John,.

    I understand that you are looking to update the firmware on your printer. Here is the information on how to get the latest updates of firmware for your printer.

    Get the latest Firmware and updates

    Kind regards

  • Installed the wrong update of Firmware for my HP Laserjet 1102w

    There are two updates of firmware for the HP 1102w. An upgrade of the printer with Eprint mobile printing, and the other upgrades the printer with AirPrint services. Of course, I installed the wrong (eprint) and now the update of the firmware for AirPrint will not be installed because it says that the firmware is up to date. Does anyone know how to restore the firmware so that I can install the firmware with the features I want?

    Hello

    Any firmware update providing the last additional functionality and any previous firmware fixes as well.

    The latest firmware is version 20110826.

    Please print a configuration page holding the Cancel button for several seconds.

    I think that you should have the latest firmware now and should be able to use the Airprint feature.

    Check that your printer is connected to the same network of your iDevice and following the steps below:

    http://support.HP.com/us-en/document/c02623193

    Please let me know of any questions,

    Shlomi

  • Update of firmware for CD - RW drive to a Satellite P30

    Hello
    I have a Satellite P30 with a carpet * a DVD-RAM UJ - 831S installed. It's supposed to be able to cope with the CD - RW disks but when trying to erase a disc through the option to erase a disc from Windows does not appear. According to the help of Toshiba and the support Centre, I get the firmware available for the reader.
    Can someone help me? I have no idea what that means or where to get the firmware said.
    Thank you very much
    Brendan Mulholland

    Before update any firmware on the drive, you must test something different.
    I found here advice very useful on the forum.

    If you install DLA (drive letter access), then you can format rewritable CD or DVD with DLA.
    Then you can drag and drop files or folders on media CD/DVD-RW, with Solution Explorer, just as with hard disk.
    You can find DLA in C:\TOOLSCD.

  • Satellite A30: Need a new firmware for DVD player

    Hello

    I'm looking to the original Firmware for my DVD-Rom, as he stopped playing DVD-R after I tried to make the region free drive. I still can't play CD and DVD original but not DVD-R

    It is said with the firmware I found on the page of toshiba FW Update Tool.exe Firmware already updated drivers.
    Is there an original Firmware for the A30 Series?

    Hello

    I guess you have tried to install application 3rd on your drive to make it region free? Am I wrong?
    Well, it seems that this software is responsible for the problem.
    I guess that this device has been delivered with the SD-R2412 reader, but I m not 100% sure.

    You can visit this page:
    eltype http://www.Toshiba-Europe.com/storage/PFT.asp?page=pft&NAV=RSC_ARC&model=SDR2412&spr_mod = COMBOSL & spr_model = SDR2412

    There you should find the update of the firmware on the right side

  • Update of firmware for PRST1 (1.0.04.12210)

    There is a new update of the firmware for the PRST1 - it solves the problem where using a flick of the very short page to turn a page may accidentally select words and start the dictionary - details are on the page Sony eSupport at the following address:

    http://eSupport.Sony.com/us/Perl/SWU-do... group_id = 5

    You can either use the download link on the above page or click help in the Reader for PC software and then click find updates , and then click OK to download the new update.

  • Update of firmware for 40TL963RB

    Good evening!

    I bought a Toshiba 40TL963RB TV.
    However, after a collapsed while respond during startup (black screen and light green only).

    I used flash USD to engrave some firmware.
    However, this firmware was for television 40TL933.
    For example, I burned 3 files (on my USB key):
    TL_MBOOT_545609_INIT_CLEAR.bin
    TL_MFC_246009_INIT_CLEAR.bin
    40TL933K_644087_INIT_CLEAR.bin

    These files as firmware my TV works fine, wait for the DVB - T2.
    I guess that this 40TL933 is not compatible DVB - T2,
    However, my 40TL963RB should support DVB - T2 hardware (I read the specification).
    However, the feature DVB - T2 has been lost during the combustion of the firmware.

    I downloaded the latest firmware for 40TL963RB: tl963_993045.bin.
    I have renamed it to 40TL963_INIT_CLEAR.bin.
    television begins the process of updating the firmware, but unfortunately, it frozes (hangs up)
    during the update firmware on 1% (always).

    Also I tried other firmwares: TL966, TL968, TL969, a version of 933.
    The same result - hangs at 1% during the update.

    Any ideas?

    I guess I need binary MBOOT & MFC binaries for my 40TL963. Am I wrong?

    Thank you very much!

    Post edited by: GkmSoft

    In my opinion its very bad idea to use the firmware that is NOT specially released for your Smart TV.
    I don t think that the use of this firmware not compatible could be very useful.

    You said, your TV no longer responds to the start.
    In my opinion there is nothing to do with the firmware of the TV because TV should work even if the firmware is not updated. I think that your TV equipment malfunctions.

    I m not Smart specialist not in TV, but there is not a lot of parts that can be replaced: motherboard and LCD screen are the main components and I think that TV does not answer the needs of TVs one motherboard check

    By the way: I found the firmware for model: 46TL963RB
    [Firmware Update Version 6.9.9E.1 | http://www.dl.toshiba.com/tsb-dtv/NA/GB/DE/46TL963RB.html]

  • Update of firmware for 30 d

    EOS 30 d: I thought I was to update the firmware, but missed the last of them, old several years now.  I 1.0.5 but 1.0.6 is indicated as the last.  When I go to the page of the software for 30 days, it shows the download, but by clicking on the button DL does nothing.  Apparently, the link is not active.  Where can I get a clean copy of this firmware update?

    Thank you very much.

    Found. Pop-up window was hidden on the screen. (Blushing)

  • Need new firmware for the drive (Mat * un UJDA750)

    I have a Satellite M30 with a carpet * a player combined UJDA750. Anyone know where I could get a new firmware for the drive?

    THX.

    Hello

    I put t know why you need a firmware for your combo drive.
    As far as I know the carpet * a combo UJDA750 driver works with the Windows driver very well.

    Good bye

Maybe you are looking for