Update of mystery of ICS to test the market Rolling out 12/01/12

A number of websites and forums I frequent pointed out a deployment of 'official' test of integrated circuits for the Xoom motorcycle market has begun. I was hoping to get some inside information. I want to know if this test deployment includes the FE or Verizon GED devices only (the two 3G / 4G)? If any of you guys have any useful information about this part please

Thanks in advance

Cool

To answer the OP, the update that has been disclosed is for the original Xoom. I do not think that the Verizon version will still rely, or any version of carrier, as they are required to sign the release prior to deployment. Xoom FE is not supported by the update of leak.

I hope that ICS will soon happen to the XoomFE.

Tags: Motorola Phones

Similar Questions

  • I just bought CS5 - CS6 update plan, but I can just test the software

    I work in CS 5.5 for awhile and decided to start the creative use of the Cloud. I signed in and ordered the offer which ends September 2 for businesses; This is to update a previous CS. The first payment is made, I installed creative cloud but when I go in the "Apps" menu it only allow me to test the software. I save the number of validation.

    How to install or update my older versions?

    allow at least a day working pst for your order to be processed.

    You can check the status of your order, Adobe ID Code

    Once you see that your subscription is active, the buttons of the trial should be replaced by install the buttons in your application to cc.  Otherwise, Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

  • Mac lion I have and I have annual subscription, it seemed to me that creative cloud tried to update Photoshop CC, DC Bridge and Lightroom 5, purchased and more programs rather replaced by those of the test, the ' I have subscription expires in November

    Mac Lion I and of I annual subscription, it seemed to me that creative cloud tried to update Photoshop CC, DC Bridge and Lightroom 5, purchased and more programs rather replaced by those of the test, the ' I have subscription comes due in November, what I do to restore those bought? Thank you

    Please check the system requirements for | Creative cloud, you can upgrade your system if allowing you to use applications Adobe Creative Cloud CC 2015.

    If you who have the old version, see: download and install Adobe Creative Cloud applications

    I hope this helps.

  • ICS soak test

    Hello bike users and administrators of the forum,

    Now that we're inside the gates of the Q3, I will once more pushing my head up and raise my hand willing to offer my Atrix2, greedy of his updated 4.0.x, to test the next version of the ICS.

    I've been quietly LURKING since February update, dealing with my camera and its behavior in the stable set, hopeful that motorcycle rise us the faithful and patient a bone and bring our bicoeur companion to date before he found himself relegated to the land of the missing.

    I don't mean date or time, or I'm looking for answers, but I simply to sit patiently, hoping...


  • After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

    After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

    Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

    (1) restart you device.

    (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

    (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

    (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

    (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

    (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

    (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

    (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

    https://support.Apple.com/en-us/HT201252

    (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

    Council: https://discussions.apple.com/docs/DOC-9892

  • Can we 'test' a plugin or extension 'BEFORE' upgrade FF? I have a password for Norton toolbar that I love. Can I test the next version of FF before installing?

    Every time I have the version of FF, I learn that my Norton toolbar is not compatible. Then I have to uninstall and use the latest version. Some time later, I learn that the Norton toolbar now works in the latest FF so I am updating. When the new FF rev comes out, I go through it again. Is there a way to test the toolbars before installing the new FF?

    http://community.Norton.com/T5/Norton-toolbar-Norton-identity/Firefox-13-support-for-Norton-toolbar/TD-p/732278

    The Norton Toolbar is now compatible with Firefox 13. We have released a Firefox 13 compatibility fix...

  • How to install this update and resolve problems of USB and the touchpad?

    I Equium M50 (59th) and am bitten by an update that pulled my touchpad and keyboard. I did the new installation of XP Home and have all updated drivers and everything goes well. The last update, what I can't understand is for
    Ana _2005_10_24_V1.2 driver is for, Standard Open HCD USB Host Controller... X 2 .........

    The update addresses all kinds of questions like I'm having and is an update recommended driver detective, I use offten.

    The problem is that it says uninstall the drivers for the i have installed already and when I do it it hits off my USB mouse me leaving no able to install the new. When I reboot it installs those I don't want not reinstalled.

    This is the read me, off the coast of the new update and really I don't understand to underdstand what to do... .so here it is?
    Driver revision history:
    Twinhan VP704A Driver Release Notes
    -------------------------------------------------------------------------------
    Note:
    1. in the event that the system hangs when running with VP704A, please install ULI
    Host USB 2.0 in \ULiUSB20Driver driver

    2. for XP/SP1, please update with the patch in

    3. in XP/SP1, update driver will crash the system, while the new facility is ok.
    The trick to update driver XP/SP1 is illustrated in the following steps,
    a. uninstall the driver
    b. disconnect and reconnect the USB device
    c. install the driver
    4 to support the controller remotely, please launch Agent.exe in \Agent.
    Further details at \Agent\Readme.txt

    Known issues:
    1 multi-instance is not supported
    2 remote wakeup is not supported
    3. strong use of the processor from analog video/audio capture
    4. bad Signal using color YUY2 format IST
    5 AV sync if audio captured the wrong filter.
    (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)
    6. noise with analog TV and FM Radio
    (Difficulty: use the filter "USB Audio Device" in the flow WDM capture device)

    Driver revision history:
    -------------------------------------------------------------------------------
    2005-10-24, version: 1.0.2.8
    Bugs fixed and new features:
    1 is not correctly configured.
    -------------------------------------------------------------------------------
    2005-10-21, version: 1.0.2.7
    Bugs fixed and new features:
    1. the firmware version read FLASH OK!
    -------------------------------------------------------------------------------
    2005-10-14, version: 1.0.2.6
    Bugs fixed and new features:
    1.MUtil - access driver empty part lower part of screen when IST!
    2.MUtil - access HCT pilot check fix crash!
    -------------------------------------------------------------------------------
    2005-10-07, version: 1.0.2.5
    Bugs fixed and new features:
    1 tuner turns off when S-Video, Composite.
    -------------------------------------------------------------------------------
    30/09/2005, version: 1.0.2.4
    Bugs fixed and new features:
    1.agent.exe update for repeat bug!
    2.TI5150 sign up to fix video Format!
    -------------------------------------------------------------------------------
    2005-09-29, version: 1.0.2.3
    Bugs fixed and new features:
    1.A pilot of the trial build for multiple access medium. (in the folder "\Multi-Access")
    Note: The filter 'Audio device USB' provided by the system does not support mutil-access.
    2 reset TI5150 when a new frequency is defined
    -------------------------------------------------------------------------------
    2005-09-27, version: 1.0.2.2
    Bugs fixed and new features:
    1. difficulty I2C unstable access on some devices.
    -------------------------------------------------------------------------------
    2005-09-23, version: 1.0.2.1
    Bugs fixed and new features:
    1. analog TV becomes sometimes darker.
    -------------------------------------------------------------------------------
    15/09/2005, version: 1.0.2.0
    Bugs fixed and new features:
    1. difficulty of installation INF for Windows 2000.
    2 FM scan radio policy changed!
    -------------------------------------------------------------------------------
    13/09/2005, version: 1.0.1.9
    Bugs fixed and new features:
    1 USB string serial number not visible with USBView, updated firmware required.
    2. political analysis of FM radio, return of release if PLLOffset > = 9 x 12. 5 kHz
    -------------------------------------------------------------------------------
    13/09/2005, version: 1.0.1.8
    Bugs fixed and new features:
    1. after the passage between AV/D/A several times, video display becomes dark in THDTV 2.61
    -------------------------------------------------------------------------------
    12/09/2005, version: 1.0.1.7
    Bugs fixed and new features:
    1. improve the performance of check channel lock status
    2 pinnacle INF Fix.
    -------------------------------------------------------------------------------
    2005-09-09, version: 1.0.1.6
    Bugs fixed and new features:
    1. Add an audio initialization function.
    -------------------------------------------------------------------------------
    2005-08-31, version: 1.0.1.5
    Bugs fixed and new features:
    1 separation of PAL and NTSC resolution mode.
    -------------------------------------------------------------------------------
    2005-08-30, version: 1.0.1.4
    Bugs fixed and new features:
    1.AvgTimePerFrame.
    2 frame drop.
    3 pinnacle inf file HCT chkinf fail.
    -------------------------------------------------------------------------------
    2005-08-22, version: version 1.0.1.3
    Bugs fixed and new features:
    1. add remote control interface in digital source filter.
    2.A new remote test tool that contains of the source code in \Test_RC.
    -------------------------------------------------------------------------------
    2005-08-16, version: 1.0.1.2
    Bugs fixed and new features:
    1. Pinnacel & Twinhan driver & file reorg.
    2.VP704A_BDA_Test tool, add a test to the system code.
    3. set the standard infrared protocol of "IRSTANDARD", "IRSYSCODECHECK1" registry keys in the INF file.
    4 firmware update
    -------------------------------------------------------------------------------
    2005-08-15, version: 1.0.1.1
    Bugs fixed and new features:
    1 serial number feature is lost when the audio volume of the TV control
    2.RC6A support CIR
    (This firmware uses GPIO3 (M9207 pin 80) to decode the RC6 Protocol.
    The material must be reworked to connect the M9207 80 pin to the CIR module and the actual
    EEPROM must be flashed with \Firmware\M9207.bin)
    3 Serieal, MAC address and name of device OEM taken in charge.
    Please see for more details on the \Firmware\readme.txt.
    4 Ioclt example source code included.
    -------------------------------------------------------------------------------
    08/08/2005, version: 1.0.0.10
    Bugs fixed and new features:
    1. increase audio volume analog TV.
    -------------------------------------------------------------------------------
    04/08/2005, version: 1.0.0.9
    Bugs fixed and new features:
    1. analog TV Video mode failed.
    -------------------------------------------------------------------------------
    2005-08-03, version: 1.0.0.8
    Bugs fixed and new features:
    1.off - centerf frequency scan + / 125Khz
    2 difficulty program a copy scanned in MCE.
    -------------------------------------------------------------------------------
    02/08/2005, version: 1.0.0.7
    Bugs fixed and new features:
    1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' bug
    -------------------------------------------------------------------------------
    2005-07-28, version: 1.0.0.6
    Bugs fixed and new features:
    1.THBDAConsole.exe 'ulFixedBW', 'ulDisableOffFreqScan', 'ulMCEFreqTranslate' support
    2. improve the stability of I2C communication.
    3 unify signaling resistance & quality as a THBda ioctl interface.
    4 capture filter lock state control.
    -------------------------------------------------------------------------------
    2005-07-28, version: 1.0.0.5
    Bugs fixed and new features:
    1. the same strength & quality signals as VP7046.
    2 debug build pilot
    -------------------------------------------------------------------------------
    2005-07-21, version: 1.0.0.4
    Bugs fixed and new features:
    1. put the INF update.
    -------------------------------------------------------------------------------
    2005-07-20, version: 1.0.0.3
    Bugs fixed and new features:
    1 improve performance in PCM4
    2 passage of the analog TV Mode to FM Mode failure
    -------------------------------------------------------------------------------
    2005-07-04, version: 1.0.0.2
    Bugs fixed and new features:
    1. production tool FM test OK!
    --------------------------------------------

    And here is the Readme file from the other file in the update?

    ************************************************** ************************************************
    ULi PCI to USB Enhanced Host Controller Driver V1.72 for Windows 98 SE, Windows ME, Windows 2000 and Windows XP
    ************************************************** ************************************************

    ----------------
    INTRODUCTION
    ----------------

    This driver supports the host EHCI ULi controller under Windows 98 SE, Windows ME, Windows 2000
    and Windows XP.

    -------------------------
    CONTENTS OF THIS DOCUMENT
    -------------------------

    1. installation instructions
    2. uninstall instructions

    ----------------------------
    1. installation instructions
    ----------------------------

    (Windows 98SE & Windows ME)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver files in your Windows system, and then restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver files to your Windows system, then turn off your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    (Windows 2000)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will install and load the driver and you do not have to restart the
    computer.
    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver in your Windows system files, before turning itself off
    your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller"and install the driver.

    (Windows XP)
    ULi USB 2.0 Controller has strapped on the system
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -Click "NEXT".
    -This program will install and load the driver and you do not have to restart the
    computer.
    -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
    Hub. " Please select "Install the software automatically (recommended)" and then
    Click 'Next' to continue the installation.
    -This program will install and load the driver and you do not have to restart the
    computer.
    B.If any ULi USB 2.0 on the system controller
    1. install the driver USB 2.0 ULi
    -Run the Setup program.
    -This program will copy the driver in your Windows system files, before turning itself off
    your computer.
    -Fix the ULi USB 2.0 computer controller card and restart your computer.
    2. after the system restarts, Windows will detect the new hardware 'ULi PCI to USB Enhanced
    Host Controller', proceed with the installation.
    -Once install the driver ULi USB 2.0 successfully. System will detect "USB 2.0 Root '.
    Hub. " Please select "Install the software automatically (recommended)" and then
    Click 'Next' to continue the installation.

    Notice:
    If you can not configure driver successfully. Please restart your system, then follow
    steps to reinstall driver above.

    ------------------------------
    2. uninstall instructions
    ------------------------------

    1. open the "Control Panel" folder.
    2 call the "Add/Remove Programs" icon
    3 choose the "ULi USB2.0 Driver" section.
    4. click on the "add/delete" button to remove drivers.

    -----------------------------------
    Change list:
    -----------------------------------
    1.74
    1 fix this multi-interface keyboard may not be detected on the USB 2.0 hub.
    2. support all USB2.0 Host Controller.
    1.73
    1 problem on Win98SE, blue screen when you unplug a USB 2.0 Scanner after scanning image.
    2 solve problem on Win98SE, blue screen when you unplug a few Scanner USB 2.0 USB 2.0 Hub after scanning image.
    3 fix on Win98SE, blue screen when copying of files through the hub of UH-204 SUNBOX.
    4 solve problem as wirless lan will disconect when the plug in usb device.

    1.72
    1 fix that system crash when HD USB copy large files.

    1.71
    1. improve the management of power in Win98 / Me.

    1.70
    1. improve the devcie detection function.

    1.62
    1 solve the problem that can not operate a USB HUB USB 2.0 disk when the system resume inactive.

    1.61
    1 solve the problem that some device under USB 2.0 HUB is not found if resumes suspension system.

    1.60
    1. in support of functions power management when a HUB with the USB plug in device
    a root HUB.

    1.57
    1. Fix USB with USB 2.0 HUB floppy cannot detect problem.
    2. fix audio problem that can not display smooth when peripheral USB connect to the system.
    3. fix system cannot detect DVICE USB when the USB device attached to the system in
    suspend mode.
    4 fix when root USB HUB have a full load, USB HD sometimes
    failure of the transaction.

    1.56
    1 fix that device of DVD decoder cannot display correctly.

    1.55
    1. fix OTI USB 2.0 drive hand cannot detect question.
    2. attach the USB mouse cannot be used after the resumption of hanging.

    1.54
    1. to improve the safety of the driver.

    1.53
    1. transfer bulk fix may stop if the USB device is connected to the USB 2.0 hub
    2 difficulty USB 2.0 mass storage device cannot access after the release of the standby mode if there is an another USB 1.1 existing device

    1.52
    1 correct fault of system pages when accessing the storage of mass Win98SE or scandisk device failure when selecting
    automatically fix file system errors
    2. fix system may hang on in Win98SE / ME if USB 2.0 cardbus card is plugged

    v.1.51
    1. to improve the compatibility of USB 2.0 card reader.
    2. fix USB IDE devices are not accessible after the release of the standby/hibernation mode.

    v1.50
    1. improve the transfer block

    v1.48
    1. difficulty of installation of the USB 2.0 LAN driver hangs up
    2. attach a USB 1.1 card reader cannot be identified when plugged into the USB 2.0 hub
    3. fix some laptops starting hanging Win98SE

    v1.47
    1. improve the performance of bulk transfer.
    2. fix the failure of USB 2.0 Preview in bulk webcam.

    v1.46
    1. support USB 2.0 and 1.1 devices isochronous
    2. fix system hang up when restarting system if the USB 2.0 host controller is disabled in Win9X / ME
    3. fix system hang up when you uninstall the driver if there is USB 2.0 connected under Win2K/XP devices
    4. improve the capacity of the device detection in Win9X / ME

    v1.45
    1. fix system hang up when the mode standby ACPI.
    2. attach the mouse sometimes does not disappear when it is unplugged.
    3. fix the failure of detection of composite devices Win9X and improve device composite Win2K/XP

    v1.44
    1. composite crutch
    2 improve the detection of devices

    v1.43
    1 improve the failure rate of transfer IDE read/write with USB 2.0 to IDE bridge on the platform of PC card
    2 difficulty at high peripheral speed detected as full-speed device
    3. fix some problem of failure detection USB mouses
    4. fix some problem USB 2.0 Hub failure detection
    5 difficulty Win98SE crashing if ULi EHCI 1.42 is installed

    v1.42
    1. fix PC Card eject hang up in Win98 / ME
    2 difficulty of interruption/resumption hang up in Win98
    3 sometimes solve USB 1.1 device cannot be detected if OS starts with USB 2.0 and 1.1 devices plugged
    4. fix some failure detection of PC Card USB 1.1 devices

    v1.41
    1. Add new feature that system can install the driver ahead of the device is plugged in.
    2. fix PCMCIA OHCI controller resources affect problem on Windos ME.

    v1.40
    1. support Win9X/ME / 2 K/XP with ULi USB 2.0 driver.
    2 fix PCMCIA EHCI controller detection device USB 2.0 problem in Win9X / me.

    v1.32
    1. Fix problem that pilot cannot detect the Microsoft driver in Windows XP
    If the path of the OS is not c:\windows.
    2. Fix problem that pilot cannot detect the USB 2.0 controller device in a system.

    v1.31
    1. Fix problem that driver cannot install on Windows 2000.

    v1.30
    1 fix than Win9X / shows ME no USB 2.0 hub.
    2 solve the problem that hang up when the second entry in Win9X S1 with HID device connected.
    3 Fix problem that sometimes when you click on "search the hardware changes.
    for PNP ULi USB2.0, controller, the system will inform you the usbehci.sys
    file is not found.
    4. Fix problem that v1.20 can't find no EHCI controller to install the driver for after different
    verison of ULi EHCI controllers devices are connected and disconnected.
    5 install the driver support for several features of controller EHCI ULi existing on
    system at the same time.
    6. determine Win2K/XP shows hub USB root for USB 2.0 hub.

    v1.20
    1. support ULi USB 2.0 for Windows 98SE/ME/2000/XP host controller driver.

    ULi Coporation. (ULi) web sites:
    http://www.Uli.com.tw/ (Taiwan)

    CAN SOMEONE TREAT ME LIKE A CHILD OF TWO YEARS AND GIVE SOME ADVICE AS TO HOW TO OBTAIN THIS UPDATE.

    I'D VERY GRATEFULL AND KIND OF THINK IT would BE BENEFICIAL to a LOT MORE than PEOPLE LIKE I SEE a LOT OF XP AND PROBLEMS OF THE KIND THIS UPDATE IS SUPPOSE to FIX.

    It is said above 2 relevant and 1 right ANSWER available...

    I'm new here, so anyone could direct me to these answers?

  • How can I test the memory on my powerbook pro

    My Powerbook Pro sometimes do strange things. Now, I would like to test the internal memory and the memory of my card.  Is there a good way to test it? In the past there where the programs official test of apple. But now it seems not to be around.

    Thnx

    confusion between the statements of product:

    1. PowerBook pro (title & 1st sentence)
    2. Mac Pro (product information on your Bio page)

    A 'Macbook Pro' is a portable device. A 'Mac Pro' is a desktop computer. If you need help to determine your model of Mac > How to find the model and age of your Mac?

    Using Apple Hardware Test - Apple Support

    Why not tell us what happens in detail?

    Tell us a story

    -with a beginning, middle and end. We need to figure out what you know and that you have lived.

    If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?

    Quoted by of Apple  'how to write a good question.

    To help other members in answering your question, give as much detail as possible.

    • Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
    • Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
    • Describe the problem and include all the Details on what seems to make it.
    • The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.

    For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question

    "Keep it short and Simple"-take your time... but be thorough - CCC

  • Someone has tested the native nVidia for Qosmio X 870 - F31X drivers

    Hello

    I have a Toshiba laptop for the past 5 years and are about to buy the QOSMIO X 870 - F31X.

    My only concern is the update of the display driver. For a mobile game, it's a huge concern. I am aware of the driver on the U.S. site:

    [Display driver X 870-BT2G23 Qosmio | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=3380646& rpn = PSPLXU & modelFilter = X 870-BT2G23 & SelCategorie = 2756709 & selFamily = 804517]

    Still would like to know if anyone has tested the native nvidia drivers?

    This is certainly the decisive factor :(

    Thank you
    Renclav

    Native nVidia driver might be installed I have not test this, but for according to other threads in forum Qosmio X, this shouldn't be a big problem

  • interruption of a structure of consumption of prodcer to regularly test the position of the servo

    Hey guys, I'm relatively new to labview and currently trying to make a multi snake like robot scene. I was interfacing with Controllers USB pololu and the need to manually control the first step and I have the remaining steps to follow, I have the first stage, using the controls on the front panel. I use a model of consumption of the producer and have pushed the button Activate an event and then queued a case in a second "loop of material."

    my current problem is now I want to start working on the control of the secondary step passively, so I want to move the front of the stage tilted upward and then start rolling on before and the second stage begins to follow in the same position. I want to interrupt regularly and check the positions on the servos to compare and to act accordingly. My first thought is to interrupt the timeout in the case where structure and test if the servos are in the same position. the problem is that my visa reference is in the other loop.

    What would be the best way to go about this? should I just queued in my gear loop on a time out and then test the position of the servo. or is there a way to share my visa resources in the loop of the producer? I originally wanted to store the reference in the loop of producer and pass whenever I went to the consumer loop but I couldn't figure a way to return the updated reference and I kept getting errors.

    call loops are an option here? any advice would be helpful. even if you have a better structure to redo the entire project. I'd love to hear it for next time if nothing else. also if theres a better void / forum bad gladly move the pole.

    Thank you guys

    1. I aim to convey information/data to the loop of the reactor of the user interface.  Leave the loop creator UI just intercept the events of GUI and send jobs to the reactor loop.  You can create more brains to the reactor loop and let it also receive the strap of material information/work.

    2. a simple concept for a regular position servo application would be an additional loop.  It's the only work is have a wait timer, then queue on demand to the loop material to ask him to send the position of the servo.  It will send to the loop of the reactor, as always, and the loop of the reactor will have built to react appropriately when it gets the position of servo information.

    3. I would not speak for the servos in any other place that the loop of material.  There are all kinds of mess if you can send orders series of different loops at the same time, can receive the answer poorly or not at all.

    Sorry, don't have time to go into details, but hope this helps a little, when you think about the implementation of the app.

    -Kevin P

    4 P.S.  I also wanted to talk about: it seems that both your reactor and Hardware loop are consumers of the same queue.  Although I see not how did you preview first and then queue only if necessary, he is still not a recommended approach.  Consider: If a loop is blocked when one of his messages is in the front of the queue, it will make the other loop stuck too.

  • Update Windows XP SP3 is abandoned during the installation of UNIDRV. DLL and displays the message "the system cannot find the file specified."

    When the update of Windows XP is install SP3, the sequence is abandoned at the location of the process.  After you download the SP3, the progresses set install through the normal initialization sequence, inspection, creating list of 3rd drive part, backup files, etc., begins to install the files but when to reach the "UNIDRV. The installation of the file "DLL" stops and I get a message "the system cannot find the file specified".  The close message will invalidate all the installation and possible automatic restart.  I did not locate a UNIDRV. DLL file and copy it to my C:\ root directory but have tried almost everything in the 22/01/12 'terribrownQF' and the response "Tommy Stanley" 22/01/12 no change where the installation of SP3 crashes.  Should I try to put the UNIDRV. DLL file on my computer?  Any other ideas?

    Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):

    1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

    2 a Norton or McAfee application ALREADY installed on the computer?

    3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

    4. why has not been installed SP3 years? [1]

    5. is Firefox, Chrome or any other alternative browser installed?

    6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner)?

    7 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?

    =====================================================================
    [1] note: support for WinXP SP2 ended the July 13, 2010! "Computers running WinXP SP2" will no longer receive software updates from Windows Update "[i.e., updated on and after August 2, 2010 so now that you're missing more than two years worth of updates to security critical! ] until SP3 has been installed.

  • Test the microphone works, but I can't save with recorder to the computer.

    I tested the microphone under voice identification. He says he works. When I opened the computer of the recorder of the window and click on 'start recording' nothing records. Also in my music software Sonar, the microphone no longer records. I went to 'troubleshooting' and the final message said: "the volume on the unit is low." Not fixed. How to increase volume for a microphone? I understand how to increase or decrease the volume of the speakers via the speaker ikon down in the corner, but you can never asked me to change the microphone volume. How do you do that? (If that's the problem!) Thank you. Operating system is Vista.

    Hello

    I suggest you to follow these steps and check if that helps.

    Method 1:

    Try these steps and check:

    a. Click Start, open Control Panel.

    b. click sounds, click the recording tab.

    c. click microphone, and then click Properties.

    d. under the controller information, check if the correct sound card is selected.

    e. click on the advance tab, under exclusive mode uncheck both boxes.

    f. click on apply, then ok.

    Check if it helps.

    Method 2:

    Try to update the latest drivers for the sound card and then check that if it helps, here is the link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    It will be useful.

  • How to install a new copy of 7.6 FatWire locally without first installing FatWire 7.5 (to test the upgrade to WebCenter Sites 11.1.1.8)

    Hello-

    I am trying to install a local copy of 7.6 FatWire content server. This is the context.

    We have FatWire 7.5 on our production servers and you try to start the upgrade process to 11.1.1.8 Sites. I do not have a local copy of FatWire 7.5 and was trying to install FatWire 7.6 locally. It would help me to test the upgrade in a sandbox before you make changes to the production. So here are my questions.

    1. is it possible to install FatWire 7.6 without installation FatWire 7.5 first and then upgrade? The documentation and downloads respectively have only steps upgrade and update rollup Setup.

    2 need a license file generated by Oracle for a working installation FatWire 7.5? My understanding is that we do. This issue of links back to my first question on why I won't install FatWire 7.5.

    Kind regards

    Hari

    Hello Hari,

    If you downloaded the installer FatWire Content Server 7.5 of edelivery.oracle.com then you don't need a license file. If it is an older installer, not provided by Oracle, then probably need a license file. In this case, the installer will ask you the location of the license file. See Doc ID 1439204.1 on how to obtain a license file.

    Is the same for your installation of the rollup FatWire Content Server 7.6 program: if it's from Oracle, you don't need a license for her file, but if it's an older one, you might need (even if you have installed everything first version 7.5 provided by Oracle).

    Note that you should move to FatWire Content Server 7.6.2 (fix 13847799) before going to the WebCenter Sites 11.1.1.8.0. (See Doc ID 1455512.1)

    You can get this from support.oracle.com under patches and updates. (See Doc ID 1471102.1)

    Kind regards

    Stephan.

  • We get an error when you test the payment flows. Can you help me please?

    I'm getting this when testing a payment flow:

    screenshot.png

    What should I do?

    Thank you, Diego.

    The form is corrupt. This is usually caused by

    (a) spoil the code tries to adapt the design.

    (b) you change things in the form to get him to change the code. Be aware that the form code can change when you use the form builder. You need to update manually if you change things in the form causing it to change ID or field names.

    (c) you have removed the form in the form designer.

  • How to test the RESTful service?

    Hi all!

    Work on the REST of the APEX services, my query is with respect to the link below:

    http://docs.Oracle.com/CD/E37097_01/doc/doc.42/e35128/restful_svc.htm#autoId6

    In the link above, topic "5.5.2 data recovery based on a parameter (employees / {id})'-> points 1.» -at-.8 are covered.

    Stuck on the point 9. Click the Bind Variables value. ", I can't find the link on this page in my Application Express 4.2.0.00.27 development environment.

    Kindly help to locate this link so that I can test my service?

    For clarity, please click the link below to the image

    http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/cloud/dbservice/restfulws/images/t2_02.jpg

    The cursor of the mouse is placed at the end of the page on any two buttons 'Test' & 'The Bind Variables value', my development environment shows not these buttons. Someone knows why this phenomenon happens?

    -Krishna Verneuil

    Well, I had like this on mine.

    For the record, you need to update you listener apex with the new apex_listener.2.0.5.287.04.27 version, which takes in charge the RESTful services. By upgrading, you will see these two missing buttons 'Test' & 'Set Bind Variables', to test your newly created service.

Maybe you are looking for

  • Retrieve album art

    just updated to the new Itunes v 12.4.0.119.  and I can't find the option to retrieve album artwork - when I choose a specific song in my library Any suggestions?

  • MacBook Pro 15 "cannot use the two fell in love at the same time

    I am trying to connect to three external displays to my Macbook Pro 15 "." Connect a monitor to the HDMI and the other two to love at first sight. Only two monitors will give me a picture. If I disconnect monitor work, one that was not working will s

  • My Facebook account has been disabled on my computer, but not my iPhone.

    My facebook account has been disabled on my computer, but not my iphone Original title: neta archer facebook

  • Choice of camcorder

    Our historical society did a video interview of individuals and puts them on Vimeo to post a link to their Web site. They asked for a recommendation for the more economical camcorder to do the job better. They want HD, hard drive and the card holder,

  • Acer Aspire E1 - 571g bluescreen

    Hey guys, I've been do bluescreen lately playing games like Marvel Heroes, Age of Empires 3, etc... What happens exactly, it is that the game freezes and I get a message saying "nvidia kernel mode has stopped working and has been recovered" after a f