Update of prototypes

Similar Questions

• How to reload the prototype and to keep the settings?

  Hello

  I changed my Labview 7.11 for the latest labview 2012.

  Now, I have a few express-vi-teststeps in 2012 Teststand.

  In the testplan it says that I must update the prototypes because they have been configured with labview 7.1.1 and are not compatible with lv2012.

  When I click the blue arrow and then the prototype is reloaded, the labview icon is shown and the teststeps is running again.

  The problem is that after reloading all custom values for the VI input variables are lost and the default value is displayed (configured settings of express-vi).

  I also changed the prototype in the types.ini, but this seems to be only valid for the new inserted teststeps.

  So what I need, is something like a 'reload all prototypes with parameter values.

  How can I do this?

  Thanks for help

  Please use update tool vi

  Open your test sequence...

  Go to tools - update vi calls (this should LV dev on your system)

  In the vi's explicit appeal process - option - select Reload if modified prototype

  This should solve the problem.

• There was a problem while creating or uploading your shared prototype

  Hi Hello, I can´t, share or update my prototypes due to an error (error 45), I've attached a screenshot of the problem.

  Thank you in advance for any help you can give me

  

  Hey Diegox23-

  Thanks for posting! We had an unexpected service failure this morning, which was resolved a few hours before. We apologize for the inconvenience - try sharing again!

  Thank you

  -Elaine

• Prototype not found error

  I can't get access to a prototype link that previously worked. I get an error 'Prototype not found. ' I tried to update the prototype and that solves nothing. I also tried to create a new link, but get a '45 error' when you try to do.

  Is there a breakdown of common or what I can do to still help out / fix the problem?

  Hi chriss56978520.

  Thanks for reaching out. You're right; He was totally on our end... We had an unexpected service outage early this morning, Pacific time. It was resolved a few hours before, so you should be good to go! Let us know if you continue to experience problems.

  Thank you

  -Elaine

• Error: (Operation Ilegal on object wrapped native prototype) after the new security update

  I have Firefox installed on a HP Presario Quad 64, 22 running the Version to the Windows 7 home page. Firefox has been running and update what I got the last (20130618035212) update published on June 3, 2013, and it installed today. After the installation of the error: illegal operation on the object wrapped in native Prototype) appears several times during the opening and one or two times on each operation, I do it, on any page thereafter. I don't know what the reason for this error, or that the update can be interacting with. I noticed that there seems to be no way to selectively remove a security update of in Firefox it's automatic, I can remove it from windows Add/Remove to see if it is the cause rather than remove the Firefox it's self and re-install. I did have a problem with Firefox for a long time now that I have become much too relaxed in my security, I must admit it took me by surprise. Any help or information would be fantastic.
  Sincerely
  Rick M.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Update Xperia Z2 Prototype

  Update Xperia Z2 Prototype

  Contact the person who gave you this prototype for more information. Is nothing, that we can answer.

• Prototype update VI

  Have a VI which is called dozens of times of TestStand and its prototype has changed. Should I visit each step where it is called and reload the prototype?

  Thank you

  JVH

  Hello

  If you are not using a custom step type then,

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/5267

  the above link help you.

  concerning

  Ray Farmer

• Impossible to send or download messages after update 31.4.0

  Automatic update 31.4.0 on/in respect of 14 January 2015 caused my installation does not send and receive messages. Initial program load and subsequent applications to get messages anywhere: display of the progression in the footer shows "[acct name]: [hostname] connection...» "and nothing else happens. When you attempt to send a new message, the sending progress Message box appears, followed by the box Send Message error containing the warning "message send failed. The message cannot be sent because the connection to the SMTP [smtp host] failed. etc.»

  No changes to the configuration of my Thunderbird were made before or since the automatic upgrade. When the upgrade has occurred, I noticed a momentary balloon message in the lower right of my screen which disappeared before I could read it.

  I tried to remove the password of access to the mail server code, but the re - try Thunderbird don't ask a new password. It is to the South earlier than that.

  Examination of the error Console shows that, after a series of regular starting entries, two inscriptions final air ladle: (1) "the Prototype of an object of the mutation causes your code runs very slowly; rather than create the object... etc."followed by (2)" did not read the chrome manifest ' queue: / / / C: / % 20(x86) /Mozilla % 20Thunderbird of program / chrome.manifest'.» Indeed, the latter file is absent.

  Note: My system is set up to read his profile information of portable player X:\ instead of the C:\ drive.

  I consulted my e-mail via webmail server and there are indeed incoming files available for download.

  Just pulled up in Thunderbird this AM without having changed anything since the publication of this issue, apart from the deletion of my password for download. Now everything works, from ask me my password. Sending a message also works again.

  The best type of problem, I said, are those who set themselves. Maybe Yes, but it was really weird. If someone in the technical assistance TBird does something to get there I would of course like to know. Otherwise, we can file under "things that go bump in the night."

• I get this message on the new v22 Firefox-error: illegal operation on the object prototype WrappedNative

  Every time I go on one Web site other than the support of mozilla I get what following error: illegal operation on the object prototype WrappedNative

  I have updated Java on my Windows 8 machine. I only went to 8.1 again. The old version of Firefox-(je l'ai utilisé il y a une heure) this message does not appear.

  What I do >

  I got the same message and disabled the You tube downloader 1.3 video
  and he went away. Hope this helps [email protected]

• When the update of Mozilla to 18.0 the drop-down list of my client site stop working

  My client's Web site is http://arivins.com/.
  When the update of Mozilla to 18.0 the drop down menu the menu (main menu) stop working.
  The site is based on Joomla 1.5.26.
  I try to update for Mozilla 19.0 but still does not work.
  Please help me solve this problem.

  Thanks in advance
  Anton

  The site seems to use a 1.2.5 old version of MooTools which is not compatible with current Firefox releases.

  • http://www.Mozilla.org/en-us/Firefox/18.0/releasenotes/

  Quote: Mootools 1.2.x incompatible with Firefox 18 and newer. Fixed in Mootools 1.3 and newer (see 789036)

  • bug 789036 - MooTools 1.2.x has been broken by the addition of String.prototype.contains

• Brand new Veer does not update the app Catalog or something else

  Hello

  Got a new at & t Veer (it was already unlocked), after have logged you in my existing profile, the phone came, but the App Catalog, has not been able to update itself as well as other applications.  Some of the suggestions in the forum to change the date to July 1 and force the update via the App Catalog, but it did not.  Clear and reset the phone, still didn't work.

  WEBosdoctor'ed the phone and it still has not installed the update (failed).

  Call in the experts to see if there are any other technique not too complicated to solve the problem.  WebOS is 2.1.2.

  I have seen one that required some hacking of level intermediate directories for reset the certificate, but a bit too risky for my basic skill level.

  Thank you!

  After scouring the forums looking for similar problems, I put on one track
  what I was living for:
  - http://forums.webosnation.com/hp-touchpad/325422-app-catalog-certificate-update-failed-2.html
  
  Thanks to the efforts of SideshowBob84, we have a solution to this problem.
  
  Despite the solution published HP to change the system date to 1 July 2013 and
  Download the update from the App catalog and install it, it still doesn't work.  It may have previously
  worked, as others have pointed out, however, since September, it appears something has
  changed and this solution is no longer valid.  Perhaps the server certificate has been
  compromised regarding WebOS and not corrected since.  HP may not be up-to-date
  of the problem.
  
  However clever mind in the WebOS community have a solution.
  
  When an update or installation of the App Catalog is requested, that a ".ipk" is downloaded.
  and then installed on your device, then the international prototype of the kilogram is deleted in your download folder.
  Very clean and hygienic when it works correctly.  When it's not as here all the
  evidence is erased, and we do not know what happened.
  
  GMMan, created a process and a patch that comes in the installation process and
  keeps ipk so that it can be installed by PreWare.  In this case, we want to download the
  Update Catalog App, but when he moved, we use PreWare to the action.  Times
  the update has been installed, you should be able to use the App Catalog without
  incident.  The following link leads to the solution of GMMan:
  - http://forums.webosnation.com/webos-tips-info-resources/322549-how-retain-app-ipks-app-catalog.html#post3378300
  Its a bit technical and a white knuckler couldn't for some.
  
  I'm not a neophyte, but I don't know where near technical competence are the guru.
  But I'll try and simplify the process in an easy to understand the document.  Before entering
  started, here is an inventory of the software solutions you need:
  
  Also when you download these solutions, remember to give what you can!
  These people put out there for the benefit of all.
  
  WebOSDoctor - this tool will reset your Veer to the conditions of the factory, he must get
  messed up.  An indispensable tool for any owner of WebOS.
  - http://www.webos-internals.org/wiki/WebOS_Doctor_Versions
  
  WebOSQuickInstall (WOSQI) - Gift of Jason Robitaille to the WebOS community for
  install PreWare, Homebrew applications and patches on WebOS devices.
  Absolutely essential and easy to use.
  - http://forums.webosnation.com/canuck-coding/274461-webos-quick-install-v4-5-0-a.html
  
  PreWare and Internalz Pro - Tools used for research of the ipk and patches loaded on
  a device.  PreWare will apply the patches on your device.  No need to download
  as WOSQI can find these ipk for you and install them.
  
  NODELETEIPK. PATCH - this patch when applied to your device will be downloaded
  the IPK is not deleted if they are properly installed.  Note: when this
  patch is applied all downloaded ipk is kept, you should not use Internalz Pro
  delete installed and no more need ipk.  A small price to pay to get your App
  Catalogue working again.
  A link to download NODELETEIPK. PATCH is found in this thread:
  - http://forums.webosnation.com/webos-tips-info-resources/322549-how-retain-app-ipks-app-catalog.html#post3378300
  
  Java 1.6 - minimum for WOSQI to work.
  In your search engine, search for 'Java 1.6' or 'Java 1.6 jre"to download Java
  the Oracle company.
  
  Your PC or laptop - WOSQI works on Windows, Linux and Mac.  I personally found
  that it does not work on PowerPC Mac, it's that you can't get Java 1.6 for these computers.
  And on PC Windows 8.1, I don't think that pilots Novacomd works on this version.
  
  -----------------------
  
  Now, the real work begins.
  
  1. install Java on your workstation.
  
  2. If your Veer is messed up, restore it back to factory using WebOSDoctor condition.  Good
  on screen instructions.
  
  3. launch your device and complete the activation and the Palm profile process.
  The AppCatalog update will fail, but it's OK, we'll fix it later.
  Once your device is running, put in Developer Mode.  To make this entry
  the Konami code on the home screen.
  Type the code as shown: "upupdowndownleftrightleftrightbastart". It's a bit geeky,
  but it works.
  Alternatively, you can type in, "webos20090606".
  You'll be put in the screen in developer mode, slide the switch to on to activate
  Developer mode.
  You can disable it later once you have applied the update to the App catalog,
  using the same codes.
  
  4. start WebOSQuickInstall (webosquickinstall.jar).
  
  5. attach your device to your workstation.  Once the workstation is aware of your
  device WOSQI will also recognize your device. You should see the name of
  your device in a drop-down list in the WOSQI.  Your device will also ask you
  If you want to connect with a USB device or charge your device.
  Select, load your device.
  
  6. There will be an icon on the right side of the WOSQI window that looks to the world
  attached to a hose.  Click on this icon and it will open a new window with
  several tabs.  Click the Applications tab if it is not already active.
  Search for Preware and Internalz Pro.  Install these two ipks.
  When these ipks are being installed, it might want to install other required
  packages.  Allow installation of other packages.  Once completed,
  Close the window and you will be current with the main window.
  
  7. now, look for an icon to sign more.  Click on it and it will open a finder window.
  Locate the NODELETEIPK. PATCH file that you downloaded previously.
  Let WOSQI install and apply the patch.  After that WOSQI applied the patch,
  the sheer can restarted.  YMMV.
  Then, for the update, set the date of your system on July 1, 2013
  via the application Date and hour.
  
  8. you are now finished with the steps in the workstation.  Remember to well to eject the
  device before you disconnect it from the computer.
  
  9. When you look at the menu of your device, you should see PreWare and Internalz Pro.
  
  10. then open the App Catalog.  Search for 'App Catalog Update.  Install the
  Update. It will probably fail, and it's OK.
  
  11. open Internalz Pro and navigate to the following folder location,.
  / Media/Internal/downloads.  You will probably see a called ipk,
  com Palm.app.appcatalogupdate_2.0.0.IPK.  Open the ipk.
  When you open this ipk, it automatically calls Preware
  to install the ipk.  When this is done, the App Catalog should be
  fully functional.  A restart of the swing may be required.
  
  12. reset the date system is automatic.  You should now be able to download
  the App Catalog programs.
  
  13. Notes, with the patch in place, you need to occasionally clean the download
  folder for managing storage.
  
  14. you're now back to a functional State of WebOS!
  
  15. you can uninstall the NODELETEIPK. Your device to help PATCH
  WOSQI, using tool/Device Management.  I had not done that, so if you are
  success, let us know!

• Please update omp_cvi_internal.h

  Hello

  When compiling with the warning level extended I get the following messages from files provided with CVI:

  "omp_cvi_internal.h" (71,26) WARNING: function declaration is not a prototype. "."

  "omp_cvi_internal.h" (72,26) WARNING: function declaration is not a prototype. "."

  "omp_cvi_internal.h" (94,35) WARNING: function declaration is not a prototype. "."

  "WARNING winnt.h" (8780,19): cast by "LONG64" (aka "long") function of type call without correspondence type 'PVOID' (aka ' Sub *') ".

  "WARNING winnt.h" (8791,19): cast by "LONG64" (aka "long") function of type call without correspondence type 'PVOID' (aka ' Sub *') ".

  "WARNING winnt.h" (8802,19): cast by "LONG64" (aka "long") function of type call without correspondence type 'PVOID' (aka ' Sub *') ".

  I suggest you update both files include accordingly ;-)

  Hi all

  This issue was addressed by the patch of f1 2015 LabWindows/CVI. Information on bug fixes in this update can be found here: http://digital.ni.com/public.nsf/allkb/E2DAF5E18C487A8886257F7D006353EA . The patch is available through the Update Service OR or related kb download.

  Thank you

• TestStand said modified prototype

  When starting my TestStand complains that the prototype of a VI changed the main sequence. The file has been opened and saved inadvertently, but comparison tools shows some differences between the archived version and the working version. This vi is affected dozens if not hundreds of times, then it will be a major undertaking to stop at each place TS complains and reload the prototype.

  Why think TS that the prototype has changed? Is there an easier way to solve this problem?

  Thank you

  JVH

  Bug 4.2 and 4.2.1. Use "tools > update VI calls" as a workaround.

• First try the producer consumer Architecture: continuous play and dynamically update settings.

  Hello

  I am currently working with two instruments; an Agilent E3646A and a NI 6212 BNC. My goal is to have the 6212 continuously take measures according to predefined parameters while the E3646A parameters can be continuously updated. This combination simple instrument aims to help me learn the manual architecture; continuous measurement, output dynamic controls and instruments more will be added in the future.

  I've already posted on a similar, but more complicated configuration (http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/Split-second-lag-when-controlling-two-instrum... and was advised to try the producer consumer Architecture.) I found the documentation on the website (http://www.ni.com/white-paper/3023/en/, https://decibel.ni.com/content/docs/DOC-2431), searched the forums and built my own VI. While my first attempt at a producer consumer Architecture has solved some of the problems I had when I posted on the subject, however, new questions have been raised regarding the reading and adoption of the VI.

  I am currently able to run the VI and update the settings on the device. Previously, I'd get a freeze while the instrument has been updated and could not switch settings until it was done. This has been resolved, although that reading updates only when a parameter has been updated, although it is outside the structure of the event. In addition, the Stop button does not in any context. I also got occasional mistakes on the part of Deqeue, but the major part of the sentence is error-200279 'A tried to read samples that are no longer available' to DAQmx Read. I realize that there is a problem in my loop of producer but have not been able to find a way to solve it.

  This is my first attempt at a producer consumer Architecture and already I can see that it is a powerful tool. I read as much as I could and looked at examples, but should have some problems at the beginning. Would be very grateful of any advice so I can take full advantage of the architecture.

  Hope to hear from you,

  Yusif Nurizade

  You're going to overflow this buffer, unless the events are generated faster than "sample rate/number of samples.   Period.  Nothing could be simpler.

  You don't need a local to stop your curls.

  Try something like this attachment.  I simply moved the structure of the event in its own loop dedicated since it had nothing to do with acquiring data at all.

  Data acquisition loop stops very well when you destroy the task and destrying the stops of power queue (sending the default values of the queue for the power control) for EXAMPLE, to ADD a group of setting 'Safe shutdown' to a 'package' and it wire to the Center terminal (Prototype).

• update of the cluster indicators

  Hi, I put a bunch of indicators in a cluster. Is it possible to update these indicators without going through another group of the same type with controls that are associated with indicators?

  Thank you.

  You can simply create a room of your cluster of the indicator and use it as a prototype for entry. See attached vi