Update of security 2016-002 does not install

Similar Questions

• Stop indicates a ready to install update ready but the judgment does not install anything

  Using a Windows 7, 16 k RAM system, always had normal installation of updates when there is a "!" stated in the stop start button. Today, there is an indication that an update is ready to install, but when I stop, there is no indication that one or more updates is installed. and when I start the computer the "!" is still there in the start stop button. I tried see if there are specific updates available for the instillation, and no seems to be there. But, as noted, every time I'm going to stop there is indication of an update ready for instillation that is not installed with the computer of the system/stop. Direction/advice/thoughts?

  Review:

  The problems with the installation of the updates:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

• Updates to Microsoft Office 2003 does not install

  I am runing Windows 7 Professional, but use Microsoft Office 2003.   I continue to receive updates for Microsoft Office components, but they will not install.  Specific are "update security for Microsoft Office Excel 2003 (KB978474), filter junk mail Outlook (KB979771) and implementation of security update for Powerpoint 2003 (KB976881).   The error message is CODE 646 "unknown error."   Someone knows how to solve?

  1. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB978474&displaylang=en&stype=s_basic

  2. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB979771&displaylang=en&stype=s_basic

  3. http://www.microsoft.com/downloads/en/results.aspx?freetext=KB976881&displaylang=en&stype=s_basic

  Download and install the Office updates manually - it's the current solution to this error with Office updates.

  TaurArian [MVP] 2005-2010 - Update Services

• KB958869 update has been downloaded, but does not install

  I've never had this problem before using XP Pro

  Hi affixed,

  Welcome to the Microsoft Answers site!

  We would need additional information for better clarity on the issue.

  (1) what is the exact error code or error message that you get while trying to install the update?

  However, try the following methods to see if he can solve the problem.

  Method 1:

   

  Save the Windows Update files

   

  1. click Start and type notepad in the box start the search .

  2. click on Notepad in the programs list.

  3. copy the following commands, and then paste them into the opened Notepad window:

  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S

  1. in Notepad, on the file menu, click on record under.

  2. in the list record under , click all files.

  3. in the file name box, type register.bat.

  4. save the Register.bat file to your desktop.

  5 right-click the Register.bat file, and then click run as administrator. If you are prompted for a password for a confirmation, type the password or click continue.

  6. try to install the updates again.

   

  Method 2: Reset the Windows update components.

  Access the link below to reset the Windows Update components automatically.

  http://support.Microsoft.com/kb/971058

   

  Method 3:

   

  Download and install Windows Update agent

   

  The Windows Update Agent lets you manage the updates will be installed on your computer. The Windows Update Agent works with the Windows Update Web site to provide updates on your computer. The Windows Update Agent also works with servers that are running Microsoft System Management Server and Windows Server Update Services (WSUS) in an enterprise environment.

  For more information please visit the link below:

  How to get the latest version of the Windows Update Agent to help manage updates on a computer

  http://support.Microsoft.com/kb/949104/

   

  After installing Windows Update agent, try to install the KB958869 update and check if the problem persists.

  Hope this information was useful.

  Concerning

  Varun j: MICROSOFT SUPPORT

  Visit our Microsoft answers feedback Forum

  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think.

• Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.

  Original title: updates

  Why my PC does not install updates? Although located to automatically receive my last update was February 2015 and all others have failed.  Although I tried to reset nothing help.

  Have also tried to download Windows 10 but computer spends all day looking for updates, but nothing happens.

  As its been almost a year that it is updated, you may be better off to backup your data and backup of your entire system, so you can get back to this point at least if something goes wrong. Then:

  Update your anti-virus software and run a full scan. Then download, install, update and run a full scan with Malwarebytesfree. Keep it free, no need to start a trial etc. Malware can be a cause of failure of the updates, the scan won't take long to run and should report something nasty, if its there.

  Then you can try the following:

  1 convenience store update Windows - http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter

  2 system update readiness tool - http://windows.microsoft.com/en-us/windows7/what-is-the-system-update-readiness-tool

  3 components of reset update - https://support.microsoft.com/en-us/kb/971058

  4. check that "Windows update service" and "Background Intelligent Transfer Service" are listed and running according to the details in this article - https://support.microsoft.com/en-us/kb/2730071 "

  If the above does not help, consider trying a 'repair installation system' - http://www.sevenforums.com/tutorials/3413-repair-install.html if you have windows installation discs, or a 'factory reset' (updated) If your PC came with no windows disk and was preinstalled. NOTE - in case backup your data and your system first in the form of data may be lost if something goes wrong, and data will be lost in the case of a factory reset.

  If you do not want to reinstall again, post back with more details, that is at least what is the error code when the updates fail? (find an update failed in "view history update", right click and click details.) Check a bit to see if the same error code. ). Then someone else can we hope to help more.

• Security update 2016-002 could not be verified

  I am running Yosemite 10.10.5.  Was invited this afternoon to install updated system "Security Update 2016-002.  He made a download of 461 MB and then forced a reboot.  After reboot, the update carried out for a few seconds, and then suddenly ended with a pop up that says the downloaded update could not be verified.  Here is the line of the error: "Security Update 2016-002 could not be verified.  It may have been damaged or corrupted during the download.  "Click Update to download and check again the update.  I've done three times.  The update failed every time, the same reason in the error message.  This update is passed through QA?  Any ideas on that?

  I too have this problem. I'm running OS X 10.9.5.  Whenever I tried to install the new update, I said that "a security update 2016-002 cannot be verified," etc.  I tried to go into safe mode and I am still unable to install the update.

  All solutions?

• KB2572073 this security update does not install

  This security update does not install what is anyone else having the same problem? I install and it says: it is installed and the next time I log in it reappea4s. Very annoying!

  Hi JimWaddell,

  ·         Have you tried the steps in the article of my previous answer?

  If this isn't the case, follow the steps in the article of my previous answer and let us know the results.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

• Update KB961118 continually appears in my system tray, but does not install after that many try. How can I remove it. This has happened for a long time. Help

  Update KB961118 continoulsy appears in my system tray, but the update does not install. How to remove OR install. This has happened for a long time. Help

  KB961118 is an option, not the security update. Feel free to hide it & move on with your life. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How to restore a security entrancecode that was not installed by updating to ios10?

  Work with the 5s iphone I recently could update to ios10. I did it during the evening. In the morning, I was told the update required an entrycode that was not installed.

  I use an entrycode before this and the same works after that.

  No longer is my ability to import on my Imac out of the photo on my iphone, it says in Iphoto: cannot import as device is held by entrancecode, you need to unlock the device to import the photo.

  My unlock does not work. I tried to connect to itunes, tried to reset, but so far nothing works.

  What can I do?

  Hello

  Go to settings touch id & password if you can't do this support.apple.com contact

  See you soon

  Brian

• Satellite P50-B-103 - Cyberlink Powerdvd does not install the update from Toshiba

  So I have an update for my toshiba Satellite P50B-103 for "cyberlink powerdvd" and it does not install, just to unpack and does nothing.

  I left the laptop to operate for about an hour to see if anything installed but it does not, what to do?

  Are you talking about the video player updated v 6.1.2.1 - A available on the Toshiba UE driver page?

  It is an update and requires the Player preinstalled (full version).

  After downloading, you will need to unzip the package (vidpl-20140813100353)
  Then, in the vidpl-20140813100353 package, you will find the TC30704300A.exe file.
  It is also a zipped folder. Right click on TC30704300A.exe and extract the files.
  After that, you will get the TC30704300A containing various additional files where you can start the update process.

• Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install in Windows 7

  I use Windows 7 update.
  Microsoft Update for hp LaserJet 3015 PCL 5 driver does not install. He says 1 optional update is available almost every day, then when I try to install, it does not install and it says that the update is not necessary. Even once when I check updates, it says 1 optional update for the printer is available from Microsoft. And the story continues. I tried to reinstall the optional update, but the same problem persists perennielly

  Is this the driver you are looking for?
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=503519&prodTypeId=18972&prodSeriesId=503548&swLang=8&TaskID=135&swEnvOID=4062

  Looking for HP for the pilot because it is better to get these live drivers from the manufacturer. TaurArian [MVP] 2005-2010 - Update Services

  No, these aren't the droids, uh, I mean the drivers he was looking for.

  In fact, it's better to get the new drivers from the HP website, you will notice the link you provided that the options only are available for this printer under Windows 7 drivers universal. I regularly have problems with universal drivers and strongly recommend to avoid as much as possible.

  I agree with the question of the original poster, which, after more than two years, remains unanswered by Microsoft. It seems that MS has a driver PCL 5 (not universal) updated specific 3015, but it fails to install the Windows Update control panel. I finally gave up on it, right click on the update and selected the option to hide it from view.

  Why bother with a solution when I use the button "Sweep-It-under-the-carpet" practice of Microsoft?

• Microsoft Office Publisher KB980470 update does not install!

  KB980470 update does not install!

  Tried several times for 2 or 3 days...

  o here are the steps I took... which I think should work:

  (1) go to the Microsoft Download Center:http://www.microsoft.com/downloads/en/default.aspx
  (2) look for each update code that begins with the letters "KB" and followed by a set of numbers (i.e. KB974234)
  3) click on the link for the download and then click on download and run. I think you have to accept an agreement, then click on continue or OK
  4) repeat for all downloads that you can not install
  (5) run Microsoft Update new and click search the updates and if updates have been installed successfully, they should no longer appear in the updates that must be installed.

  I don't know if it is not relevant or if it helped me succeed to install updates manually, but before I manually installed my updates I followed the instructions David_O posted under this threadhttp://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f3390e74-9961-4aae-8a05-554c1a9cf1a2?prof=required&lc=1033 . I suggest that first of all try to download manually by following my directions. If it does not, then it's a possibility instructions of David resolved an issue that allowed me to download them manually disable Microsoft downloads site.

  I can't believe all the research and the suggestions of the technicians did not work... sometimes your own research is the best!

  I hope this helps! Good luck!

  "I tried and it works!

• Windows Update does not install SP3 on Windows XP Pro computers

  I have about 400 computers running Windows XP SP2 withIE 6.  It is set to automatic updates on installed every day at 03:00.  For some reason, SP3 is installed automatically never.  If I run the windows update manaully, it offers me to install SP3.  Is it normal?

  SP3 does not install automatically. It's like IE8.

  Perhaps this may also be of interest:

  Release notes for Windows XP Service Pack 3
  http://support.Microsoft.com/kb/936929

  TaurArian [MVP] 2005-2010 - Update Services

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• A few days ago I installed some updates and since then, Norton does not work. It shows a red exclamation point.

  Original title: norton malfunction

  A few days ago I installed some updates and since then, Norton does not work. It shows a red exclamation point.
  Help, please.

  Contact Norton support. It's their product.