Update of Silverlight caused black screen on Netflix

Similar Questions

• Satellite L300 - after the BIOS update I have a black screen

  Welcome! I have a big problem.

  I improve my Satellite L300 BIOS to the old version that I download on the official website of Toshiba. I turn on the update program and after about minute, the system will shoot down and on the screen I see black screen only. The light on the drive flashes green and the led in the DVD-ROM flashes orange. I have no idea what's going on.

  Please help me!

  Hello

  It sounds like this during the update of the BIOS, that something was going wrong. I think that the ROM module must be reflashed or in the worst cases, the motherboard should be replaced.

  In any case, you should contact an ASP for help. Technicians can try to reflash the ROM module and solve this problem.
  If you don't know where is the nearest ASP, you can search on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• After installed Windows 8 on my Dell Ispiron 660 PC, doing an update and download now black screen?

  Install Windows 8 on my Dell Ispiron 660 PC, Worked fine. After update of several programs, she has restarted. Now, I have a black screen and cannot fix.

  Install Windows 8 on my Dell Ispiron 660 PC, Worked fine. After update of several programs, she has restarted. Now, I have a black screen and cannot fix.

  To all those who responded. By chance, I removed a faulty graphics card and it has started up.

  Thank you all...

• Updates to Silverlight causing Windows 7 32-bit system to hang at the office

  Having two machines running windows 7 Pro 32-bit. After yesterdays critical updated for Silverlight, both machines will begin but crashes after loading office. At this point, I can see the lights in car crazy but can not enter in the Manager of tasks to process information. Can not open all apps and get no response, but the mouse pointer is active. Boot into safe mode and do the system restore to remove update Silverlight and both machines run perfectly. Any ideas?

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/854c3ec3-a4aa-4102-8305-fb464d3c5ddb

• Re: Windows Update KB kb961371 causes blue screen when you try to connect with BT

  Just thought I'd share what he had me flumoxed for awhile.

  I found that Windows Update has published around July 16, 2009 cause BT crash and Wlindows to go back to a blue screen.

  KB961371 is installed automatically by Windows Update If you have set it to do.

  Unistalling it end the Bluescreens.

  BT Stack Version 6.40.00 (T)

  Windows Vista, but can affect other operating systems

  Update details

  http://support.Microsoft.com/kb/961371

  Ian

  Hey Ian, thanks a lot for this info.
  I'll test it on my machine.

• When I restart my iMac (10.11.3), I see what looks like an update of the firmware (black screen with progress bar). It happens every time. How can I get rid of him?

  I've done a few things:

  (1) I checked the updates in the App Store. Nothing obvious jumped.

  (2) I tried to restart everything again. No luck.

  (3) I checked System > Library > CoreServices > Firmware updates.  It is empty.

  Not sure why it does this. But really want to stop. It makes reboot take an extra + 30 seconds, at least.

  Adam

  Make sure that you have selected to boot from the hard drive Macintosh

  How to choose a boot on your Mac - Apple Support drive

• configuration updates stage 3 of 3 0% gge full then goes to black screen

  my computer is stuck on step 3 of the configuration update, then goes to black screen says diskette drive 0 seek failure F1 to continue F2 to set up

  Hello

  I suggest to manually restart the computer and try to start in safe mode and perform a System Restore. To restore the operating system to an earlier point in time, follow these steps:
  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.

  Once the computer is restored to the earlier date, try to install the updates manually.

  You won't lose your data saved in the hard disk by performing a system restore.

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Let us know if that helps.

  Kind regards
  Clement Kumar.

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP starts with a black screen and hangs for two minutes before the end of the boot process.

  Original title: Windows xp slow at startup delayed to the office after you download the updated April 8,2011

  First time after updating, would start then black screen can see the cursor then took 20 minutes before Office input... now does the same thing but just a few minutes. What happens all started after the recent update April 8... something about a NET update? any IDE how to fix?

  Hi kaeli,.

  ·         Have you checked the problem in safe mode?

  Step 1: Try to start in safe mode to see if you can start fine.

  Step 2: If he is able to start fine then try try perform a clean boot to normal mode to check whether a third-party program is causing the problem.

  How to configure Windows XP to start in a "clean boot" State

  You can also read the following article to resolve the problems on the issue.

  Perform a clean boot to determine if background programs interfere with your game or program.

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  See also:

  Computer stops responding with a black screen when you start Windows XP

• Black screen instead of my desktop

  I installed and activated Windows 7 without problem a few weeks ago. I did an update and now a black screen appears instead of my desktop and I get this message: your version of windows is not valid (key). I bought this product legally, does anyone have a solution?

  Windows 7 displays "Windows is not genuine" with the code error 0x80070005:
  http://support.Microsoft.com/kb/2008385/en-us ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After reboot, vista with a black screen boot

  Whenever I want to restart my vista family premium after a few updates, it becomes a black screen.i have searched the Internet for a solution, but unfortunately none of them are in my scenario.i still hear the music of vista boot, which I assume that the computer is running but the screen is black.i need help! I would appreciate if I could receive advice on my computer. Computer: NEC P6000

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
  then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
  accessible by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore
  It only needs to be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI
  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions.
  You will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP Pavilion Elite HPE - 400z CTO: H - RS880 - Μatx Motherboard BIOS Update caused crash, to see a black screen now?

  I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.

  The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update

  That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".

  I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-400-desktop-PC-series/4269972/document/BPH...

  without success.

  Any other suggestions of what I could do to fix this?

  Hello

  Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.

  If your PC support has been changed or modified then put it back in its original state.

• New update causes macbook black screen failure

  I just installed the latest update to the design of the experiment, and now, whenever I run the application, I get a black screen of death crash.

  I use a Macbook Pro retina 2013 model.

  I uninstalled the app and reinstalled a fresh version, but the problem still persists.

  Someone else has this problem and is there a work around? Customer, I have work to do today!

  Thanks in advance

  A few members of the team suggested:

  1. Try to restart in Safe Mode - reboot and hold down the SHIFT key. Then, run the application and see what happens.
  2. It could be a problem with your PRAM - a member of the team suggested trying the reset of the PRAM: A Solution for the MacBook Pro to boot to a black screen

  Let us know if these work.

  Thank you

  -Elaine

• Satellite L300 - update BIOS black screen caused to go

  Got Tempro opinion on Satellite L300 Bios upgrade. During the upgrade installation, laptop rebooted by itself. Result is fresh light on and power light, fan turns but black screen. What should I do to recover the machine.

  Try this:

  Remove the battery and the AC and let sit for an hour, then try to start again.
  Open memory cover and remove the second Module of RAM (or change the size of the RAM). This may reset the system and startup.

  If this fails, the BIOS was damaged, in which case you will have to send the laptop to an ASP for repair.

• Vista, update 4.9.218.0 (3140527 KB) for Security Essentials caused a problem starting black screen.

  Discovered this cause after several days using the Safe Mode and system restore to get the job of the computer. I couldn't uninstall it so I reinstalled a new version of Security Essentials, and this seems to have cured the problem.

  But this bad patch has "successfully" installed on my computer several times

  over several days last week and is always sent by Microsoft for installation.

  What is going on? Security Essentials will be polluted by him again?

  What should I do next?

  Hello cragusbe, you need to hide the update. It caused the same problem for many MSE Windows Vista users, maybe even all of them: http://www.vistax64.com/windows-updates/304379-update-microsoft-security-essentials-4-9-218-0-kb3140527.html

• Firefox 9.0.1 only video stream Netflix - goes to black screen.

  I've updated my Mac Firefox 9.0.1 and now can't get videos to stream on Netflix. It's just a black screen. I googled the bug and found a conversation but I don't speak tech.

  I am running Silverlight 5.0.61118.0. How a) remedy or b) back to another version of Firefox that will allow me to stream.

  Closing Firefox.
  Open applications. Select Firefox in a single click.
  CTL + i this will open a window.
  At the bottom, click on the box that says start in 32-bit mode.

  It worked for me and my Mac (with Silverlight, Firefox and other updates all courses).
  Good luck. Hope that they solve this problem.