update of the elements of custer in an effective way

Similar Questions

• Update of the elements of the interface in a loop for?

  Hello

  I have a loop which, among other things, contains a command appendText.  It adds character to a text on the screen box.

  I noticed that instead of adding text to each iteration, he waits until the loop is completed, and then adds all the characters.

  It is not noticeable on short, but very sensitive loops on the longest.

  Is there a way to flash update the text box as each iteration happens, rather than dump all the text added to the end?

  Thank you guys.

  Shaun

  Two things:

  1. If a loop is running that cannot do anything else

  2. the screen redraws occur once on each image

  So if you want to add text and to see the result before adding another text, you must do this on each image (i.e. on the enterFrame event). If you try to do this in a loop, Flash runs the loop at the end first, then go to the next section, then redraw the screen to display the final result.

• Update of the elements

  Elements do not allow me to update unless I close "elementsautoanalyzer.exe". Can't find it to close. Even with elements of Prime Minister. The two newly installed.

  Open Organizer and click the top menu:

  Edit Preferences in media analysis

  Uncheck all the boxes to turn off.

  

• Update of the elements on the Page regarding filters in Oracle APEX interactive report

  I recently started using interactive reports in my Oracle APEX application. Previously, all pages in the classic application reports. The interactive report in my new page works fine, but now, I would like to add a summary box/table above the interactive report on the same page that displays values added some columns in the interactive report. In other words, if my interactive report displays 3 names of separate Manager, 2 separate offices and 5 different employees, my summary (box) will contain a line and three columns with numbers, 3, 2, and 5, respectively.
  
  So far, I did this job creating the box summed up as a classic report that account of the distinct values for each column in the same table that my interactive report pulls. The problem is when I try to filter my interactive report. Of course, the classic report is not updated based on the interactive report filters, but I don't know how I could link the two so that the classic report meets interactive report filters. From my research, there are ways to refer to the value in the search box of the interactive report using javascript/jquery. If possible, I would like to refer to the value of the filter of the interactive table with javascript or jquery to refresh the summary box whenever a new filter is applied. Does anyone know how to do this?

  Thanks, Patrick! I was always getting some of the old filters for a reason, but I was able to use the tables included in queries to retrieve my ID to report, that I used in the APEX_IR. Function GET_REPORT.

  More details here.

• The Adobe update application manager fails to download updates of the elements 9.0.3 and Camera Raw 6.5

  I tried several times to do the update. I still get the same error.

  

  Try these direct download links:

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5000

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5264

• Need help on the essential "UPDATE" of the data in the table...

  Dear experts,
  
  Need Advice...
  
  I have one table in which i have 200,000 records, now in this table for each record i have to update quantity figures...
  
  To perform such bulk update i am using the following method...
  
  *1. At first i create TYPE*
  
       CREATE OR REPLACE TYPE T_OBJ_GET_QTY (--);
  
  *2. Create TYPE as table of object created in step 1*
   
       CREATE OR REPLACE TYPE T_GET_TEST_QTY 
       AS TABLE OF T_OBJ_GET_QTY; 
  
  *3. assign object type to the variable*
  
       p_get_test_qty T_GET_TEST_QTY; (Created in step 2).
  
  *4. now i write the cursor using type created in step 1...*
  
        cursor c_upd_qty as
         select T_OBJ_GET_QTY( col1, col2)
         from v_view;
  
  *5. open cursor and fetch into variable created in step 3...*
        
         open c_upd_qty;
         loop
             fetch bulk collect into  p_get_test_qty limit 1000;
             --perfom update now..
               forall rec_upd_qty in 1..p_get_test_qty.count
                   update table t1 
                   set c1 = treat(p_get_test_qty(rec_upd_qty) as T_OBJ_GET_QTY).c1
  
                  exit when notfound;
      end loop;
      close c1;
  
  
  Kindly let me if this correct way to perform bulk update of the data, or is there any better way to do so...
  Please share your inputs...
  
  I hope i am clear in asking my question
  
  Regards
  nic

  Published by: W Nicloei on May 27, 2011 01:10
  
  Published by: W Nicloei on May 27, 2011 01:36
  
  Published by: W Nicloei on May 27, 2011 01:45

  Ahh, ok.

  And a row of the view corresponds to a line in the table that you want to update?
  I guess that your update statement would have a WHERE clause identifies the row to be updated, right?

  If so, why not "merge" the view in the table, using the MERGE Oracle statement?

  Something like:

  MERGE
       INTO  target_table tgt
       USING source_view vw
       ON  ( vw.key-column(s) = tgt.key-column(s) )
    WHEN MATCHED
    THEN
       UPDATE
       SET   tgt.c1 = vw.c1
  /
  

  I still don't see why you would need a pl/sql program that retrieves all rows from the database in memory program and then writes all back in the database.

• I have Adobe Photoshop elements 10 Costco edition in DISC format.  We have Macs.  However we have updated all the new Macs and do not have DVD drives in them.  I still have the old top Mac desktop that can run Photoshop, but I wan to install it also on my

  I have Adobe Photoshop elements 10 Costco edition in DISC format.  We have Macs.  However we have updated all the new Macs and do not have DVD drives in them.  I still have the old top Mac desktop that can run Photoshop, but I wan to install it also on my laptop.  I have serial numbers.  Where are the instructions to do this?  Thank you.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• How to install the updates for photoshop elements on Windows 10 13?

  When I open the Photoshop Elements program, I get the same information every time update. I tried the install now and install on the output. I gave permission to make my computer accept updates.  Updates are displayed in complete form everytime and I rebooted the computer, but yet I still get the same updates when you open the program.  Any suggestions would be greatly appreciated.

  Hi cassandrak89742630 ,

  Would like to inform you that Photoshop elements 13 is not compatible with Win 10, refer to this article:- system requirements | Adobe Photoshop Elements

  In the meantime, you can install the updates by using this link:- updates to Photoshop Elements and Camera Raw

  If a problem persists, try to install the other user account with Admin rights

  Kind regards

  Christian

• Yesterday, I have successfully downloaded an upgrade of items 10 to 14. No problems. This morning, I downloaded an update of the 14.1 elements. Now I have nothing. How can I fix it?

  Yesterday, I have successfully downloaded an upgrade of items 10 to 14. No problems. This morning, I downloaded an update of the 14.1 elements. Now I have nothing. How can I fix it?

  Hi Christangles,

  We will be happy to help you, but before that, there are a few information such as:

  What is the exact error message/code if you found one?

  What operating system you are using the version?

  This is Photoshop Elements or Premiere Elements you use?

• If I update my Photoshop Elements catalog (13) in Lightroom will I still be able to access the catalogue in elements?

  I have a 60 000 catalog + elements I'm using since version 2 or 3. I considered pulling in Lightroom, but don't know if I'll be able to adjust my workflow - so I can continue to use elements instead. The upgrade change the catalog or copy it? Can the two programs share the same catalog? I read that events created in an existing catalog of items will not appear in Lightroom. Is this true? Are there other tags/etc which cannot be accessed?

  Thank you

  Christine

  Update the catalog Lightroom 6 not change or modify your catalog somehow, and elements will continue to be able to use it. Programs do not share the same catalog. Any work you do in the catalog of items once the upgrade is not known of Lightroom, two catalogs do not speak between them.

  My advice is for you to try Lightroom on new photos that are not in the elements, see if you are comfortable with Lightroom on these new photos rather than real work on photos that are in BOTH Lightroom and elements, work in Lightroom ddone transfers automatically to items.

  Please read the free e-book for beginner with Lightroom: http://www.lightroomqueen.com/

• I JUST had THE ELEMENTS 14 UPDATE today, I CLICKED 'IMPROVING', BUT I have NO LONGER FIND "photomerge" - this WHO HAPPENRD to IT?

  I JUST had THE ELEMENTS 14 UPDATE today, I CLICKED 'IMPROVING', BUT I have NO LONGER FIND "photomerge" - this WHO HAPPENRD to IT?

  It is now guided:

  Photoshop elements help | Guided - mode Photomerge edits

  Thank you

  Blandine

• Just updated for first elements 13 took a film and tried to apply instant film. I get a dialog box called "Adobe first Elements.exe - no disc. I have not all discs, because I downloaded this update. A ran the same film and feature on Eleme

  Just updated for first elements 13 took a film and tried to apply instant film. I get a dialog box called "Adobe first Elements.exe - no disc. I have not all discs, because I downloaded this update. A ran the same film and function on 12 items, it has worked well. I reinstalled the 13 items that was no help. Note it is very difficult to get rid of this box, it crashes the program elements sometimes

  mnicolett4

  What operating system is involved? Assuming that Windows 7, 8 or 8.1 64-bit for now.

  There is a known No Disc error associated with the elements first 13/13.1. The Adobe fix is the removal or disabling of the OldFilm.AEX file. Let us determine if this applies to your situation.

  The file OldFilm.AEX that you remove or disable renaming in OldFIlm.AEXOLD is located in the path of 64-bit Windows 7, 8 or 8.1 of

  Local disk C

  Program Files

  Adobe

  Adobe Premiere Elements 13

  Plug-ins

  Commune

  NewBlue

  and in NewBlue folder is the file OldFilm.AEX that you remove or disable renaming in OldFilm.AEXOLD.

  Please let us know if it works for you.

  Thank you.

  RTA

  Add on... Have you updated 13 to 13.1 still using Help Menu/updates to date of an open project? If this isn't the case, please do.

• I updated Adobe Photoshop elements 11 to Camera Raw Plug in version 7.4, which still isn't a version more enough to accept the raw images for editing of my Sony alfa 7R. Is it possible to upgrade to version 8.3 or do I have to buy new software?

  I updated Adobe Photoshop elements 11 to Camera Raw Plug in version 7.4, which still isn't a version more enough to accept the raw images for editing of my Sony alfa 7R. Is it possible to upgrade to version 8.3 or do I have to buy new software?

  No, you pushed PES 11 up to the limit. You could move on to PSE 13, or you can download the free adobe dng converter and use it to make the DNG files that your version of ACR can understand.

• Why suddenly first Elements 10 stop working after complaining about needing an update of the player

  First Elements 10 worked fine two days ago. Now he complains that the video card GEForce 220 required an update to the driver. But I have the latest version of the driver. Other users have the same problem, what I see on the GeForce support community. Adobe can fix?

  cjrenson wrote:

  I have the latest version of the driver.

  According to Windows, or http://www.nvidia.com/Download/index.aspx ?

• Every time I make an external edition with 12 LR6 elements it tells me I need Camera Raw 9, but the elements will not update to Camera Raw 8.5. How to stop this message pop up?

  Can I stop this pop up does not happen? Or is there a work-around that will get Camera Raw 9 install on 12 items?

  spinner498 wrote:

  Here, I'm a bit confused. The message, in LR long before the opening of the elements. I don't see this as a question of items other than the items will not be upgraded past 8.5. It's a LR definition probably

  It is actually both a Lightroom and Photoshop Elements problem. The version of Lightroom you are using search Camera Raw 9 to make sure that the image is properly translated when it transfers from Lightroom to Photoshop Elements. Lightroom can see that you have only the version of camera raw. Lightroom notifies you as well as the transition between Lightroom and elements might not transfer all adjustments using Lightroom. So, it should give a free choice either way you or edit a copy with Lightroom adjustments. The second option is the one you should choose. Then Lightroom will create a TIF or PSD file (depending on your external editing options) and send this file to the elements. The only way you can completely solve this problem is to have a version of Photoshop Elements, which is fairly new to use the same version of camera raw that Lightroom is looking for. If you don't want to upgrade your version of elements, then you should choose the option to edit a copy with Lightroom adjustments.

  Camera Raw is used when you transfer the file from Lightroom to elements to translate the raw settings and create an image that can be edited in the elements. By itself without camera raw, Photoshop Elements cannot change raw images. The image must be converted before its opening in Photoshop Elements.