update of the ICS

Similar Questions

• Neo V Screen Shots problem after update of the ICS.

  How to take screenshots in NEO V after ICS update... Help, please

  Press the power button / stop and the volume button low at the same time and keep them there until you take a screenshot

• Xperia Ray problems after update of the ICS

  Hey I've just updated my Xperia Ray to ICS... but after the update, the accelerometer calibration seems haywire... Whenever I'm browsing my Gallery screen does not automatically change its orientation (automatic screen orientation is on)... and if in a video or a photo, he spends in landscape mode, it does not return to the potrait mode when I change the orientation of the phone... Help, please...

  Also, there is no face unlocking device in the update (India)... any ideas?

  I see only reinstall your software that can help, the decision is yours

• error during the update of the ICS

  Hi guys... I m getting error durning update, it says cannot install or start phone software update components. Help, please

  It may be because of overloaded servers

  Try this

  POU (Sony Update Service)... Download and install it on the pc and follow the on-screen instructions http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe

  or

  http://www.sonymobile.com/global-en/tools/update-service/

  The two links are same

• Question about the update of the ICS

  Hello

  I've updated my bow to android 4.0.4 yesterday, and his great performance, I just want to ask when I updated it I did not remove my SIM and SD card, after updating all my contacts where always there and my installed is still installed, is this ok? I want to say that I expected that my installed applications will be

  deleted and my contacts, my messages and call logs too but, after the update, nothing has been deleted and the phone works to 4.0.4 android os, pls help.

  P.S. the updated software was great, my phone is running smooth, thanks Sony,

  Yes, its normal, when the update using SUS you have two options here, update your phone without deleting your files or factory resetting your phone then install the update, or if you download the OTA update no file will be deleted. If you have problems you can reinstall the update or data factory reset your phone.

• Update of the ICS stuck on "database upgrade multimedia"

  Anyone else seen this? It is stuck on "Multimedia upgrade database" for about an hour. Is this normal?

  We see it occasionally. Pull your SD card - while the upgrade is running - and the upgrade should complete. Then you can reinsert the SD card and you should be fine. It will take time for all media to sync, however.

• Update of the ICS Xoom?

  How can you become part of the impregnation study I'm registered, but have not received anything?

  
  

• Acer iconia a510 jelly bean update for the Australia

  ACer, when are you going to release the jelly bean update for the Australia, it was published in other markets before Christmas. It is now March and does still no update!

  I've now updated to Jelly Bean. Forthose who cannot get their a510 updated here is why. You must first upgrade to the last image in the ICS. The version of the image that I was on has been Acer_AV041_A510_RV10RC03_AAP_AU. * How to check the version of the Image of your A510? Path: [parameters]--> [about Tablet]--> [version of the Image] If you have the same image as above then you haave upgrade.

  Go to the acer support page http://www.acer.com.au/ac/en/AU/content/drivers

  Select your Tablet model

  Then select the OS tab towards the bottom of the page.

  Download the Acer.AV041.A510.RV28RC08.AAP.AU. This will download a zip file. In the zip file will be 2 files one will be instructions on how to upgrade.

  Once you have upgraded to the last frame of the ICS and the Tablet has restarted after a little while you will receive a message in the lower left area of notification that a uprade system is available. This upgrade is Jelly Bean.

  Hope this helps someone who was also oost I was aboutnot get the upgrade.

• Canon MG7100 prints but will not scan after update of the iMac? How to fix?

  Canon MG7100 worked very well with the iMac - scanning and printing. After doing the updates of the iMac and installation Siri scanning does not work. Always printing. The printer/scanner Canon said - Set PC to start scanning - I have MG7100 added on the iMac. I opened (and re-locked) firewall to let in the Canon UJ utility. I deleted the all-in-one Hi - and added MG7100.

  http://support-Asia.Canon-Asia.com/contents/Asia/en/0100535401.html

  doesn't look like canon has a printer that takes in charge the newer versions of Mac OS x, if I were you I would take contact them to see if they plan on support of new versions, apple made no drivers for the hardware they don't and if hardware manufacturers does not provide a working driver head can group with the new version of Mac OS x We have to rely on manufacturing to have a download on their page

• The closed display mode is no longer works after update of the Sierra on my MBPro. Known bug?

  I use a vertical dock for awhile, so my MBPro retina works in closed with external display, KB and mouse display mode.

  But since I installed the update of the Sierra, the external display not Mac OS desktop.

  It only works when I open the built-in screen...

  The bug is known? Or y at - it a setting to adjust on the Sierra?

  Thank you in advance

  Hi darklemon,

  I understand that, since the update to Mac OS Sierra, you've been unable to use your MacBook Pro in closed view. I know it's important to use your computer in a way that suits you, then I'm happy to help you.

  Let's start by resetting your memory NVRAM and SMC which can often help with system display and related issues:

  How to reset the NVRAM on your Mac - Apple Support
  Reset the management system (SCM) controller on your Mac - Apple Support

  Once you have done this, follow the steps here to set up the closed display mode:

  Use your Mac laptop to view closed with an external display - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Update of the bad experience of typing after Sierra

  After the update of the Sierra the typing experience is sub par.  He lags on the screen and sometimes the AutoCorrect intervenes before you finish typing, "correcting" the word after that I typed it correctly.  It sorts of predicted what I'm typing and corrects until I finished typing so that the end result is something like "unbelievablele" or "correcteded."

  Anyone with the same problem?

  You can disable the automatic correction of spelling and grammar until you are done typing and then allow him to do these things on your work completed. What you have described is Pages doing all this while you type. On the Edit menu.

  Uncheck all the features in the submenu, as I've shown here:

  

  When you are finished typing, then display spelling and grammar.

• cannot select the disk to install the update of the Sierra (Macbook Pro 13 inch, late 2011)

  I downloaded the update of the Sierra and proceeded with the installation. However, I noticed that even if I could move the pointer autour, I couldn't make selections on tapping the trackpad. I managed to get past the first steps by using the 'tab' key (keyboard) to make selections and 'space' to make the confirmations. However, arriving at step 'select the disk where you want to install Mac OS', the 'Tab' and 'Space' technical has stopped working. Now I'm stuck here. Can someone tell me please how to go beyond this?

  Looks like it's a problem of trackpad? Or in any case a trackpad issue connected with installation of Sierra? I would take the MBP for a Genius Bar...

• Time Machine does not work after update of the Sierra

  The time function machine my Mackbook Air 2011 stopped working... it has not been saved since update for Sierra, it only take screenshots every hour, it will perform a backup is no longer on my external HD as before.

  There is no problem with the way it is implemented or the hard drive, it's me that my iMac is working perfectly since the update for Sierra and it's backup via the time machine on the same hard disk.

  It is a hard drive and put in place I was in use for about 5 years with no problems.

  Also since the update for Sierra I noticed that my MacBook Air gets hot and the fans go wild, although there was nothing or performance other than the system is auto.

  I lost the use of my built in camera after the update to El Capitan, and now I've lost the use of time machine... I was wondering if I should go back to Yosemite that everything worked well then!... is this possible?

  Thanks for any help with this!

  Update:-just so you know, time machine is to find the back up ok drive (external hard drive), it then goes to "preparing backup" and that's all, he remains in this preparation save the scene for centuries, after a while it just stops and it is saved all... nothing!

  Also noticed when I checked in Time Machine full backup I have before update for Sierra disappeared, he disappeared, been deleted... I don't know what is happening with it!

  Overall since the update for Sierra my MacBook Air did not work properly, in addition to all that Safari does not load, just to get the wheel spinning, and now (with the demise of my old back ups) it seems I can't go back to a previous state.

  My Mackbook Air took it!... the last update took the camera and really Sierra in... material not compatible with all new software, none of the new features work on my iMac or MacBook Air (only Siri), so a useless upgrade for me really, wish I didn't!

• Some problems of AppStore after update of the Sierra

  Hi, after update my Mac to Sierra, there are a few problems of the AppStore:

  1. The Pages app updated to v6 and numbers to v4, Keynote, but fails to Update v5 (iWork ' 09)
  2. I've been on the program of public beta for Sierra but have now updated to the release version, but the app store is still trying to download the last Beta of Sierra. I disconnected (e) into the beta program website
  3. The AppStore download iPhoto but the app shows the icon of the incompatible (white circle with bar diagonally) in the Application folder - how to uninstall it?
  4. Is does not work available on the AppStore - the previous Terminal command Debug menu for access to this

  Thank you

  Hello

  Safe Mode boot removes the system caches that can you help an update or upgrade.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

• Update of the Sierra did not update

  I'm under 10.11.6 on a 2013 11 "Air w / 8 gb and 92 GB of free space on my ssd.  This morning, before I went to have breakfast, I plugged the computer to the power brick and ran the update for Sierra.  When I came back home and connected to the computer I ran "about this mac" in the Apple menu and indicated that I was always running El Capitan.  I searched my ssd to see if there is perhaps a .dmg file or file install somewhere, but there was not.  I also looked in the section updates from the apple app store to see if she was still showing Sierra, but it wasn't.  Also, I rebooted the computer and no change.

  Can someone enlighten me on what happened here?

  Looks like there was a problem with the download, installation failed.

  Try to do it again and this time stay with her so that you can see what is happening.

  You do backup before the upgrade?